Can arch binaries be used for other distros

hi,
Can arch binaries be used for other linux distributions like slackware and ubuntu?

Acecero wrote:
karol wrote:
Acecero wrote:
There was a community project that started a while ago where you can create packages for other distros in Arch called unipkg.
Though I don't know if there is any activity anymore...
http://github.com/paradoq/unipkg looks quite fresh.
To me it appears there was no activity since it started 2 months ago.  I understand it is a fresh project, just no recent updates.
Ooops, you're right, not much going on there.

Similar Messages

  • Can Country Specific IT used for Other countries...?

    Dear Friends,
    According to the requirement i need to maintain the Disciplinary Actions .
    For which i have identified the following Infotypes.
    1.) IT 0102  (US Specific)
    2.) IT 0545  (Korea Specific)
    Is there any Infotype to maintain the disciplinary actions for other countries (MOLGA - 99)
    If not can i assign one of the above Infotype and use. If yes, will there be any major affects.
    Thanks in Advance.
    Regards,
    ABHI

    You can use Infotype 0102 Grievances NA even for the country grouping '99' for the disciplinary actions go to table V_T582L and make it permissible for the country grouping.

  • HT4623 my iPad has over 5GB of memory used for "other." What is this and can I reduce size?

    my iPad has over 5GB of memory used for "other." What is this and can I reduce size?

    gregorfromny wrote:
    my iPad has over 5GB of memory used for "other." What is this and can I reduce size?
    See Here  >  maclife.com/how_remove_other_data_your_iphone
    Other is usually around 1 GB...
    A  ' Large Other ' usually indicates Corrupt Data...
    First Try a Restore from Backup...
    But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup...
    Then a Restore as New is the way to go...
    Details Here  >  http://support.apple.com/kb/HT1414
    More Info about ‘Other’ in this Discussion
    https://discussions.apple.com/message/19958116

  • HT4623 I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things

    I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things.
    is there another way i can download the update? it just never work, tried multiple time

    The most common causes are:
    Your antivirus, firewall or router security is blocking access to Apple's servers - try temporarily disabling them - if you have Kaspersky this is definitely the problem
    At some time in the past you used this computer to jailbreak, unlock or otherwise hack ANY iPhone, iPod Touch or iPad - if this applies to you your hosts file is corrupt and you will have to edit it and remove any lines that contain "gs.apple.com"

  • DataTrigger : can it be used for other pl/sql code than before and after?

    Hi,
    I was wondering whether the <dataTrigger ...../> can also be used for other PL/SQL code than just using it for the beforeReport, afterReport and stuf.
    Just now I placed a call to it in the datastructure, as last entry in a group (for headers f.i.), called it AfterHeaderTrigger, and called a function in a package.
    It didn't fail, but I dont think it excecuted it though.
    So, can you do that?
    thanks
    Ronny

    thanks, that's what I thought.
    It's a shame, it would have been so cool.
    thanks
    Ronny

  • Can HR Setup Integrator can be used for other module too??

    Gurus, Can we create custom integrators for other modules too using HR Setup integrator. say for inventory module.???

    I have used it for projects (although the integrator is created against my custom application)

  • [SOLVED] PKGBUILD equivalents for other distros

    I'd like to package some of my tools for other distros - mainly .deb and .rpm based for now.  Ideally, I'd like to not have to build full packages for each distro, but instead host build scripts or equivalents of PKGBUILDs for other distros.  As I am not nearly as well versed in other distros as I am with arch, I'm not sure how to find the needed information to accomplish this.
    To take .deb as an example, the pacman rosetta page suggests debuild is the equivalent tool to makepkg.  However, the debuild man page indicates that debuild can simply be run within the source tree to build a package.  Certainly this can't be the case, unless there are distro-specific files within that source tree that debuild finds and uses.  That man page does not indicate what these files are and how they are written.
    I have found documentation for creating full binary packages for debian-based distros, but is there an equivalent to a PKGBUILD?  I know for Gentoo, ebuilds are well documented and should be quite doable.  But frankly I'm pretty sure most gentoo users wouldn't need my help with those.  I'm currently primarily targeting .deb as many novice linux users that I'd like to make a couple of my tools available to seem to use ubuntoo.
    I suspect I may just be missing the proper documentation and/or am not using the right search terms.  Any nudges in the right direction would be appreciated.
    (edit: marked 'solved' as I now have the information I needed to get started working on this - but more input can always be handy.)
    Last edited by Trilby (2014-01-08 20:34:26)

    I recently discovered Debian's `checkinstall` which is very close to what I was looking for.  One can easily create a script that will download and install a "non-debianized" source package as a .deb that can be managed by dpkg/apt-get.
    Allegedly it can also create rpm packages, but I'm not going to worry about trying that out for a while.
    A simple example of a script to allow debian/*buntu users to install one of my packages can be seen here.  There is an executable script called `makedeb` - guess what it does.  There is also a package-specific file called DEBBUILD - guess what that's for .  With just those two files, a debian user could run the script which would get the needed info from the DEBUILD to install the needed dependencies, download and build the source, install under the watch of checkinstall to a temp directory, have checkinstall build a .deb package, remove the builddeps (and optionally all deps installed during the build), and leave them with a *.deb file ready for dpkg.
    This instance of makedeb was intentionally made generic so it could work for other packages, however it is also *very* simple and so will not work for all other packages.  A DEBBUILD is nearly identical to a PKGBUILD, except the dependency names need to be converted to the debian deps (and there may be many more deps needed as you cannot assume our base/base-devel components are there ... and split -dev packages suck).
    Making this DEBBUILD + makedeb made me wonder how hard it would be to convert our own makepkg over to work on top of apt-get/dpkg.  I've installed debian (crunchbang) on one of my systems to experiment with this.  I've realized there may not be much to it really.  I've just completed my revision to the actual makepkg script (and makepkg.conf) to make a full featured makedeb and makedeb.conf.  It is not yet tested - and once I test it I may find it is not nearly as complete as I had hoped.  But the goal is to allow PKGBUILD -> DEBBUILD conversions to be quite easy (just change the deps).
    I may post my full featured makedeb in "community contributions" if/when it passes a few basic tests.  It will not run on arch, but it is suited for archers who need to make debs.  It may eventually run on arch (there are dpkg is in the AUR, and so is checkinstall, though it is very broken ATM), but this is not a goal of mine.
    Last edited by Trilby (2014-05-30 17:37:40)

  • Can FW CS3 be used for graphic for printing?

    I am very familiar with FW but I do not like Photoshop,
    however I have both I preffer to use FW. As I have seen on one
    presentation new FW CS3 has CMYK pallete so my question is: can FW
    CS3 be used for preparation of graphic for printing or what are the
    obstacles? After preparing images in FW I will use InDesign for
    text or maybe the text in FW is wector and maybe I could use FW
    including text and not to use INDEsign far small projects? Does
    anyone has any experience with this subject?
    Regards
    Martin

    qnnick wrote:
    > I am very familiar with FW but I do not like Photoshop,
    however I have both I
    > preffer to use FW. As I have seen on one presentation
    new FW CS3 has CMYK
    > pallete so my question is: can FW CS3 be used for
    preparation of graphic for
    > printing or what are the obstacles?
    Fireworks does not operate or export in CMYK color space. It
    was
    developed for screen images only, and operates and exports in
    RGB color
    space. It is not recommended that you use it in preparation
    of images
    for print. You mentioned that you don't like photoshop. You
    might like
    Illustrator better.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • Can an iMac be used for WD My Book Live safepoints?

    I have a Western Digitial My Book Live network drive.  All Mac's and PC's can read/write without a problem.  I would like to create a safepoint (WD term for backup) on an iMac but can't seem to get past correctly discovering the devices on the network.  The MBL can 'see' the shares on the XP PC but nothing on the Mac's.  Unfortunately the XP PC is not suitable for backups.
    Can a Mac be used for MBL safepoints?  If so, how is that accomplished? 
    Yes, I've posted this same question the WD Support and WD Communities but no responses.  Most MBL Mac users posting on WD forums are using them for Time Machine.  I thought maybe someone on the Apple forums might have solved this problem.
    Thanks in advance for any help.
    Mike

    I am having the same issue.  Did you ever find an answer?  I see no one ever responded to you.  I have a WD cust service Tech support question submitted but no answer yet there either.  Thanks for any info you have.
    I get the error
    30000 - Unknown error. Retry your last operation. If the error persists, contact WD Support for assistance.
    (share_discover_9)
    when I choose the iMac as the location I would like to use.

  • Can a IDOC be used for data exchange from R/3 to CRM

    Hi All,
    First, can a IDOC be used for data exchange from R/3 to CRM
    I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
    To achive this can I use IDOC?
    Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
    Please respond immediately.
    Regards,
    Gopinath

    IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
    Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
    Hope this helps,
    Kai

  • Can Adobe Distiller be used for converting all pro/e (3D -2D)  files to pdf format?

    Can Adobe Distiller be used for converting all pro/e (3D -2D)  files to pdf format?

    Acrobat Distiller Server converts Postscript to PDF.

  • In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is   overheating.  What would that be - so I can have repairs done?  The

    In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel.  I can boot up and use for about 5 minutes before the mouse freezes.  I believe something is
    overheating.  What would that be - so I can have repairs done?  The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
    <Edited By Host>

    Hello USME,
    'Tis a common problem on old Macs.
    Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
    Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
    Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
    Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through  the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
    Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
    A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire  working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
    In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
    Good luck!... Jon

  • The server farm account should not be used for other services

    I have created a new SharePoint Foundation 2013 Farm. I only used the Farm Configuration Wizard to create the Search Service Application, all other aspects of the Farm was created using PowerShell.
    The SharePoint Health Analyzer is reporting the following error:
    Title: The server farm account should not be used for other services.
    Severity: 1 - Error
    Category: Security
    Explanation: DOMAIN\FARM_ACCOUNT, the account used for the SharePoint timer service and the central administration site, is highly privileged and should not be used for any other services on any machines in the server farm.  The following services were
    found to use this account: Distributed Cache Service(Windows Service)
    Remedy: Browse to
    http://centraladminsite:port/_admin/FarmCredentialManagement.aspx and change the account used for the services listed in the explanation. For more information about this rule, see "http://go.microsoft.com/fwlink/?LinkID=142685".
    Now I understand how to change the account used to run the Distributed Cache Service, but my query is what account should I use in the least privelage model? I have setup the following 6 accounts as per TechNet guidelines (Link)
    and am not sure if one of these accounts should be used or if another account is required:
    SQL Server service account
    Setup user account
    Server farm account
    SharePoint Server Search service account
    Default content access account
    Application pool identity
    After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity
    Service, a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services
    within the Farm?
    Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
    Kevin Evans

    After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity Service,
    a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services within the Farm?
    Inder: Yes, It is suggested to have multiple service account for each service application. This increases security and dependencyof 1 account on multiple Service applications. Like below
    SQL Server service
    Local System account (default)
    Setup user
    Member of the Administrators group on the local computer
    Server farm
    Network Service (default)
    No manual configuration is necessary.
    SharePoint Server Search Service
    By default, this account runs as the Local System account.
    If you want to crawl remote content by changing the default content access account or by using crawl rules, change this to a domain user account. If you do not change this account to a domain user account, you cannot change the default content access account
    to a domain user account or add crawl rules to crawl this content. This restriction is designed to prevent elevation of privilege for any other process running as the Local System account.
    Default Content Access
    No manual configuration is necessary if this account is only crawling local farm content. If you want to crawl remote content by using crawl rules, change this to a domain user account, and apply the requirements listed for a server farm.
    Content Access
    Same requirement as the default content access account.
    Profile import Default Access
    Same requirements as server farm.
    Excel Services Unattended Service
    Must be a domain user account.
    http://technet.microsoft.com/en-us/library/cc263445%28v=office.15%29.aspx
    Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
    Inder: Each service account has a application pool and you can plan to use same application pool for multiple
    service accounts if required. These application pool are then consumed by proxy connection
    of each service application. On service application pool, you can see all the service applications and its proxy connection.
    If this helped you resolve your issue, please mark it Answered

  • Can Adobe Collage be used for images smaller than the standard 1200 by 789?

    Can Adobe Collage be used for images smaller than the standard 1200 by 789?

    Hi,
    * Photoshop Touch does have very good text capabilites.
    * For opening the Collage as an Artwork (Merged layer) in Photoshop Touch, you just need to upload the Collage file to Creative cloud and import it directly into Photoshop Touch.
    But if you are looking to preserve all the layers of the Collage file, you should download the Collage file as PSD from Creative Clould and import it in Photoshop Touch as layers.
    * Collage does have canvas scalability, you can extend up the canvas on all the four directions. But i think in you case you are looking for having specific custom sizes of the canvas, which is not currently available in Collage. Currently you cannot shrink the canvas below the default canvas size.
    Hope this is helpful. Please do revert back if you have more queries.
    -Subbi

  • Can photoshop elements be used for commercial work?

    Can photoshop elements be used for commercial work?

    Check with the company that does your printing to be sure that output from PSE is ok and their file format requirement.

Maybe you are looking for