Can Audigy 2 double as a firewire ca

I have an Audigy 2 card with a firewire port. Can this card double as a firewire card to connect a digital video camera or will I need a separate firewire card? Thanks in advance, ncsumdMessage Edited by ncsumd on -30-20062:53 PM

You should see the IEEE394 device listed in Device Manager
--> if it's there you should be able to use the firewire port even the sound card is disabled there.
IIRC, it's not very good controller but should work well in this situation.
jutapa

Similar Messages

Soundblaster Audigy 2 ZS SC w/FireWire Multimedia Au

I just reformatted my XPS Gen 5 and apparently the Audio Driver I need for the aforementioned card is no longer supplied by Dell.
This specific Audio driver isn't listed for download by Dell and isn't available for download on CreativeLabs anymore. Here's the details:
SP 0358
Dell said for me to contact CreativeLabs since they no longer have the driver.
Where can I get it's
Thank you.

Maggard wrote:
I just reformatted my XPS Gen 5 and apparently the Audio Driver I need for the aforementioned card is no longer supplied by Dell.
This specific Audio driver isn't listed for download by Dell and isn't available for download on CreativeLabs anymore. Here's the details:
Soundblaster Audigy 2 ZS SC w/FireWire Multimedia Audio
SP 0358
Dell said for me to contact CreativeLabs since they no longer have the driver.
Where can I get it's
Thank you.
As it's an OEM product you have there, you probably need to modify the installer meant for original CT products. I have posted some instructions long ago so if you search here by using "ctcomp.exe" as a searching criteria you might find that thread. You also need drivers from older installer since CT made some changes to the installer so that the old ctcomp won't work with the latest driver installation. IIRC, there were a fix-up for this too available but I'm not sure where it was introduced ... was it @ DHF (link given below)?
You can download the CD as an ISO image from BadBoys site (http://badboy.filefront.com/).
IIRC, there were some other instructions for this @ Driver Heaven Forums and also you might already heard of YouPAX driver mod ... which can be found @ Driver Heaven too.
jutapa

How can I define Double Click Processing in SAP Query ?

The first question is : How Can I define drill-down for SAP Query report ?
The second one : How can I program Double Click in SAP Query report for Different columns like ALV Grid processing ?

you can attach a repot or at tcode etc in an SAP query using report assignment in SQ01 but as far as i remember you cannot attach multiple reports.
regards,
khusro habib

How can i print double sided from my macbook? The option is not highlighted., how can i print double sided from my macbook? The option is not highlighted.

How can I print double sided from my MacBook? The option is not highlighted,
shazmina2

This function is related to the printer driver and the printer you use. If you do not give details, nobody can suggest a solution. Usually, the correct driver solves the issue.

Can PB boot from an External Firewire Hard Drive?

Can I set up an external firewire hard drive as an emergency boot drive, in case my internal drive goes south? Anyone have utility software recommendations for setting up boot drive or mirror drive, in addition to OS X's Disk Utility? Thanks.

Photon2:
Yes, you can set up your external firewire HDD as an emergency boot drive.
Here's what you need to do:
1. Your HDD must be formatted Mac OS Extended (Journaled)
2. (Optional) I suggest you partition your HDD so that the first partition is roughly equivalent to the size of your internal HDD. The rest can be partitioned for other uses. (See Dr. Smoke's FAQ Backup and Recovery) For step-by-step for formatting and partitioning please post back).
3. Use SuperDuper or Carbon Copy Cloner to make a bootable clone of your internal HDD to the external firewire HDD/partition.
Please post back with further questions or comments.
Cheers
cornelius

Can I add Classic on a Firewire 800 external drive?

I stupidly bought a CD that needs Classic to run. I don't want to install Classic on my main system. Can I install it on a Firewire 800 external and expect it to work?

I remembered I had an old backup of a friend's Classic system on a LaCie Triple Interface drive. I connected it via Firewire 800. OS X found it, modified it, and aksed me to restart Classic. It worked fine. I was able to view an outdated presentation CD which required either Mac OS 8-9, or Windows.

Why can't I double click column seperaters to auto resize in OSX Lion?

Why can't I double click column seperaters to auto resize in OSX Lion?

No idea, why you are so aggressive. We are only all trying to help each other.
You didn't mention anything about Cover Flow in your orignal posts, did you? I am neither content or not content using Column view. This has nothing to do with me! I was simply trying to help you by suggesting that Column view works.
By the way, I am not wrong. Column view resizes perfectly well when the vertical separator line is double clicked.

Why I can't use double click to open files, pics and videos?

I had bought new retina macbook pro 15 in, everething was working perfect I was open files, pics, videos with double click in the mouse pad normally but I do not why now is not working I can not use double click in the pad for open files. I have to open it using two finguer click or right click and then click open or open with, why is that happening?

in system preference i had select (tap to click) with one finguer, (secundary click) click or tab with two finguers, tracking speed fast and in the mouse preference I had select (tracking speed, scrolling speed, double click) fast and primary mouse button left.

Why can't i double click to open

I'm sure i could just double click on a folder in finder and it would open up. Now I've upgraded to Yosemite I can't do it, I have to tap, then select open in new tab. ITS SO ANNOYING!!! Surly theres a way (and i don't want to keep on pressing command and the down arrow either)

I can't actually double click anything in finder anymore and i know i could that before the update.

How can I find double photos in iPhoto'11?

Hey, how can I find double photos in iPhoto'11? Only know that it displays doublets when I use the import function in iPhoto'11.
Thanks
Matthias

Thanks for the answer. After I posted this question, I saw there were other discussions. I do see everything is there, but it is time comsuming to view each individual picture to make sure I put it in the right catagory!!
I did send feedback to apple, but I see people have been asking them to fix this problem for the last 7 months or so, and it is still not fixed.....so what is good about the new version!!?

Audigy 2 ZS and internal Firewire P

I purchased an Audigy 2 ZS and love it already, but am wondering something. The platinum version has a dri've bay panel with a firewire port that connect to the 394 plug on the Audigy 2 card.
My computer case has a Firewire port on the front of it and was thinking about hooking it up to the card. I have the following connection wires in my case:
TPA+.....matches Pin on card
TPA-......matches Pin 2 on card
Ground..matches Pin 3 on card
Ground..matches Pin 4 on card
TPB+....matches Pin 5 on card
TPB-.....matches Pin 6 on card
I also have VP and VG wires. I'm assuming these are voltage, but not sure. If so they would match with Pins 7 and 8 on the card, but I'm not sure which goes to which.
According to the card Pin 9 is not used.
I also don't have a PHY_GND wire which matches with Pin 0 on the card.
Has anyone gotten this to work with something along the same lines?
Anyone have any suggestions?
Thanks Michael

hi
i to have a problem with firewalls.in this case zonealarm.when i try to burn a cd with it on it fails.i turned it off and it finished the cd to the end.i made 2 cds that night.im using li've 24 bit.i plan to also get a router.any ideas how i can fix the firewall to work when im burning cds?tanks.
??????????coonsanders

Can multiple Macs access the same firewire volume simultaneously?

I have a firewire drive and hub, and two Mac Minis. I would like to use this hardware to build an Oracle 10g Real Application Cluster (RAC). To do this, both Macs would have to be able to read/write blocks on the same volume on the firewire drive (Oracle prevents collisions). Newer Linux kernels have support for doing this. It seems that the Mac OS X Server 10.3.4 that I am using blocks at the volume level by node. It would seem to preclude my using this hardware unless I devote another machine to being an NFS server for the shared storage. I'm looking for possible kernel tricks to get this to work.
Jeremiah
Mac Mini Mac OS X (10.3.4)

According to Oracle's white paper on RAC:
The type of disk storage used can be network attached storage (NAS), storage area network (SAN), or SCSI disk.
It does go on to say:
Alternatively Oracle supports the use of raw devices and some cluster file systems such as Oracle Cluster File System (OCFS) which is available on Windows, Linux and Solaris
I suppose if Oracle is taking over the raw device, support might be possible, but OCFS is not available for Mac OS X.

Can I import video from a Firewire camcorder using the Thunderbolt to Firewire Adapter?

I have an older camcorder that has a firewire interface. My new iMac does not have any firewire ports. Can I import video from the camcorder using a Thunderbolt to Firewire Adapter or is the Thunderbold adapter only used for hard drives and displays?

Rather than an adapter, I would suggest you purchase a 4 pin to 9 pin Firewire 800 cable to run from the camera to the Thunderbolt to Firewire adapter. Those FW 400 to 800 adapters frequently do not work so well for importing video in my experience.
The Firewire cables are pretty inexpensive if you get them online. For example try Monoprice.
http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

How Can I Simulate Double-Clicking A File To Open It In The Default App Without Installing Default App?

I have an app written with Visual Studio 2013. The app has code for opening a file using the standard OpenFileDialog and also has code (AutoOpenFile()) for opening a file when a user double-clicks on a file that is handled by the app. I have not yet created
an installer for the app, so I won't be able to test it's AutoOpenFile() code...unless there is a way to simulate the process of auto-opening the double-clicked file without actually installing the app on my PC. Anyone?

Thanks for your reply, Wyck. I already have the necessary code in my app for opening a file when I double-click on it. The problem is that the app is not currently installed on my PC. Until I do install it, is there a way I can test-run that code
by double-clicking on an associated file?
You lost me at: you want to test-run code that is not on your PC.
O_o
You want to double-click a file, and then...what do you want to have happen? You want to run...something...that is not on your PC??
The "simulation" is to launch your app from the command line and pass in the name of the file you wanted to simulate a "double-click" of.
Regardless, you cannot get the shell to have a double-click of a file cause your application to launch unless you modify the registry to do so. (This is tantamount to "install" to me.)
In the spirit of continuing to be helpful, though, I'll assume that this is what you want to do and I'll show you how to get it done with the least amount of tampering with your registry.
Here are minimally invasive registry modifications you need to make to get it to launch a program when you double-click your file. It's pretty small.
EXAMPLE ONLY:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.wyck]
@="Wyck.Document"
[HKEY_CLASSES_ROOT\Wyck.Document\shell\open\command]
@="c:\\windows\\system32\\notepad.exe \"%1\""
[You have to save the above with your appropriate modifications to a file with the
.reg extension (e.g.: test.reg) and then you'll have to double-click the test.reg file to "merge" these settings into your registry.]
The example above registers a file extension called .wyck and assigns a completely arbitrary class name to it called
Wyck.Document.
Then it associates a shell open command with the Wyck.Document class that causes
notepad.exe to be passed the filename of the file you double-clicked (that's what the
%1 does). You are welcome to replace all the specific names with your own extensions and class names and replace notepad.exe with the path to your (test) executable.
This executable will be launched, but not with a debugger attached. To facilitate debugging it, you'll want to temporarily add some code to your program to pause when the program launches, possibly by showing a message box right at the very beginning
of your main function that says "attach debugger now" so that you can attach a debugger to the process that was started by the shell, and then dismiss the message box and continue debugging.
When you are done with your testing, you can simply manually delete those two registry keys using
regedit.

How can I merge double CDs, boxsets, and bonus material down to one grouping in iTunes?

By far the most annoying thing about iTunes to me is that it will separate double albums and songs that have bonus tracks onto two or more albums. I don’t understand why iTunes does this. The reason that some albums are released as double albums is that the albums were too long to fit on a single cd. Of course when using iTunes we don’t have that space restriction so why can’t I just merge everything together?
I have tried changing the title of the albums but that mixes the songs together oddly. It will play track one of disc one and then it will play track one of disc two! Obviously that wasn’t what I intended for it to do. What I find even more frustrating then splitting by double albums is that if you buy the disc and then buy bonus material on the albums from iTunes and Amazon you will have the bonus material just group by where you purchased it. One of the albums I have lists the album three times because both iTunes and Amazon had bonus material that I got from that album that could only be bought at certain stores. How can I get them all merged together into one album?

You can give both CDs the identical album name but then make sure you enter a number for each disc in the disc number field. This will set the order to tracks on disc 1, then disc 2.
I have never bought bonus material so I am not sure of the nature of this material. As long as you give things the identical album and artist name they will all cluster in the same album as long as nothing is set in the sort fields. If the artist varies then make sure the album artist field is set to the identical artist.

Can Audigy 2 double as a firewire ca

Similar Messages

Maybe you are looking for