Can autonomous and LAPs co-exist?

I have an existing roaming 2.4 wireless network which consists of 4 autonomous 1242 APs. I need to expand the coverage area.
Can I add a controller and LAPs with the same SSID and expect my clients to roam from the autonomous AP to the LAP?
Or do I need to replace the 4 1242s with LAPs?
Thanks

The code you would need is here:
c1240-rcvk9w8-tar.124-25e.JAO3.tar
http://software.cisco.com/download/release.html?mdfid=280237322&flowid=7588&softwareid=280775090&release=12.4.25e-JAO3&relind=AVAILABLE&rellifecycle=ED&reltype=latest
To convert the AP's, here are a few links to guide you:
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Sent from Cisco Technical Support iPhone App

Similar Messages

Can Actuate and BIP co-exist in a Siebel environment?

Just need to check how we can have both BI Publisher and Actuate co exist in our Siebel environment
thanks.

I doubt that both can co-exists as we have asked Oracle support about this before.
Thank you

Can Robohelp6 and Robohelp7 co-exist on a machine?

I write for a few different groups, some with Robohelp 6 and
some with 7.
For life to be good, I really need to have versions 6 and 7
installed on my machine. I have a license for each - my department
bought version 6, and another department bought me a copy of
version 7. But - when I installed 7, 6 was un-installed.
I can't develop my other projects in 7, because they won't be
able to support it once I'm done (because they still have 6).
Can these two co-exist?

Hi there
I currently have the following all installed and peacefully
coexisting side by side on the same PC.
RoboHelp X5
RoboHelp 6
RoboHelp 7
RoboHelp 8
So I'm going to go so far as to blatantly claim that version
6 and 7 together will work. What you can't do is to expect to use 7
to edit projects and still use 6 to edit the same projects.
There is another issue that might be at play too. If 7 was
purchased as an upgrade for 6, the licensing probably prevents you
from leaving 6 installed and also installing 7. You would have to
have purchased full versions of each to do so.
Cheers... Rick

Can SiteMinder and OAM co-exist (SMSession and ObSSOCookie)?

Hi folks,
We currently have SiteMinder in place, but we're migrating to OAM 10.1.4.3.0. At some point, we'll need to have SiteMinder and OAM to co-exist and stand in parallel, so that we can gradually phase out Siteminder, and start protecting all of our resources with OAM. With this in mind, is there a way for the two of these access systems to co-exist? Can they share some common data, so that once user has been authenticated with SM, a cookie is created (similar to SMSession) which would then be understood by the OAM, or vice versa. This way, when the same customer accesses a subsequent resource protected in turn by OAM, the OAM (instead of authenticate and authorize user for the second time) would then read a session cookie, created by the SM and grant access. This scenario should be reversible, and also work the other way around with OAM as an entry point.
Has anyone faced the same issue?
Thank you,
Roman

For apps already protected by SiteMinder:
User get authenticated by SiteMinder; gets SMSession cookie and comes to app protected by OAM
OAM can read the cookie value and treat it as Credentials. For this you need to evaluate how to make OAM understand the SMSession cookie value.
More Info: http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12488/v2authen.htm#BABEAHEB
For apps protected by OAM:
User get authenticated by OAM; gets ObSSOCookie and comes to app protected by OAM
Well, I'm not sure if this is supported by SiteMinder, but there should be some way to read the ObSSOCookie value also. Otherwise, you need to develop your own module.
If you have considerable number of applications, it will be practical if applications are migrated from SM to OAM step by step. I might be wrong with these ideas, but it will be a good experience to involve in such type of discussions. Lets see what the experts have to say on this.

Can iPhoto and Picasa co-exist?

I am using OS X, my wife has a Vista PC, our huge photo collection is on an external NAS.
We both use Picasa to access our photos - me, I have to boot into Vista to do so, since there still is no Mac version for Picasa.
What I would LIKE to do though, is using iPhoto on my Mac while my wife uses Picasa on her PC. I guess I could use Hazel to automatically add all photos to iPhoto that are dropped into a folder on our NAS. And tell iPhoto to store all photos on the NAS. But I guess I am missing something big here, right?
Did anyone try that before? Is it possible? Or am I dreaming?

The answer is Yes... but...
If you use iPhoto in Referenced mode you can do this. Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
Now iPhoto will not copy the files, but rather simply reference them on your NAS. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures. You are responsible for file management. You put the pics on the NAS, you remove them yourself after deleting them from iPhoto. Essentially you're telling iPhoto 'Don't touch my pics' and this includes on the way in and the way out.
2. You cannot rename the files on your system or iPhoto will lose track of them. Nor can you move them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers. But then again, you are.
Downsides? iPhoto has no cross platform ability whatever. Edits you make in iPhoto or via iPhoto will not be available to your Wife unless you export them back to the NAS. Don't move the Library to the NAS, folks have reported issues (up to and including database corruption) with Libraries on a NAS. Also, depending on the Format of the NAS there can be rare problems with the jpegs losing their file suffixes and becoming .exe files. (This can be easily repaired with a batch file renamer such as Name Mangler).
My best suggestion: create a test library. Set to Referenced Mode. Import 100 pics and see how things go. Play with it and see how things hang together or not.
Or change your wife to a mac.
Regards
TD

Can Palemoon and Firefox co-exist ??

My friend uses Palemoon and I want him to switch to Firefox. Can he use them both on the same computer to see which one he prefers ??

They can coexist, but should both use their own profile. You can force this with the -p startup parameter (you can edit the shortcut to the program to include this parameter).
It may work to use the same profile, but in case it becomes corrupted, you know how it might have happened :)

Can TCS1 and TCS2 co-exist on the same PC?

We are getting ready to upgrade from TCS1 to TCS2. I'd like to keep TCS1 installed until we upgrade all of our projects to TCS2. Is this possible?
Thanks
Dave

Only the FrameMaker component will peaceable co-exist with other versions -
RoboHelp and Acrobat (probably Captivate too) will not.

Can Thunderbolt and Firewire co-exist?

The question: Are there any known problems with using an external Thunderbolt drive and occasionally switching between Thunderbolt and Firewire800 (via the TB to FW adapter)?
More detail: I'm considering the purchase of a thunderbolt external drive as a backup unit for a NAS. The plan is to use the unit mainly on a Mac with a TB port. However, it would be useful to have the option to use the Firewire 800 to Thunderbolt cable if/when access to the drive must be done using a Mac with only FW800 port.
TIA.

There should be no issues that arise from occasionally using an adapter or switching between FW and TB ports in that situation. Basically, the device is just looking for a way to send and receive a bunch of zeroes and ones. As long as you give it a way to do so, it's happy.

Can EJB and BC exist at the same time in one project?

having to use ADF's BC and EJB to access data in both way due to the special requirements, but I am always getting the deployment failure.
can Ejbs and BC components exist at the same time in one project?

thanks for your reply.
I considered to separate the BC and EJB as the separate project. I just use the EJB component to implement the dynamic tree menu, whether a little make a mountain out of a molehill if you as a separate project.

Converting 1250 APs between autonomous and LWAPP

It took me a while to get this information, so thought I'd share. Here it is:
You cannot use the upgrade tool to do the IOS to LWAPP for the 1250 APs.
Here is a method to do the conversion.
*Method 1 : ( Mode Button )*
1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
2. Assign IP address in the range 10.0.0.x ( Ex : 10.0.0.3)to the server.
3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com
4. Make sure you set the IP address on the BVI interface of the AP if
not set.Set it in the 10.0.0.x range.
5. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
5. Hold the mode button and power off the AP.
6. Power back the AP while continually holding the mode button for 20-30
seconds.
*Method 2 : ( Archive Command )
*1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
2. Assign IP address in the range 10.0.0.x ( Ex : 10.0.0.3)to the server.
3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com
4. Make sure you set the IP address on the BVI interface of the AP if
not set.Set it in the 10.0.0.x range.
5. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
6. On AP, type archive download-sw /overwrite /force-reload tftp://192.168.5.210/c3201-k9w7-tar.124-3.JK2.tar
Going the other way (lwapp to autonomous)
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
If you need to manually "prime" the LWAPP:
AP#lwapp ap ip address <IP address> <subnet mask>
AP#lwapp ap ip default-gateway <IP-address>
AP#lwapp ap controller ip address <IP-address>
AP#lwapp ap hostname <name>
(optional)
Hope someone finds this useful!

The problem here is that you can't have any fast roaming since you have autonomous and LAP's. The thing is... the phone is associated to a LAP and the mac is known on the trunk port of the wlc, then the phone roams to the autonomous AP and the LAP and IOS AP don't communicate so there is no smooth hand off. Phone has to re-associate or re-authenticate and the mac shows up on both ports until the arp times out. For VoIP, a mixed environment is not supported.

Can Struts and JSF coexist?

I have a Struts based application and now I want to build an additional module on top of that using pure JSF. My question is, can Struts and JSF co-exist in the same application? If yes, what are the cons of that approach? What are the places I need to tweak in the configuration files so that they work together?
thanks,

Hi,
Yes they can coexist. Actually that's the approach recommended by Craig McClanahan. I have developed a full enterprise application (80% completed) which uses JSF in front and Struts in the back using Struts-Faces integration library (developed by Apache).
So far I haven't faced any major issues with this approach. However, I haven't try using Struts validator on JSF objects.
Read the article below on how to integrate JSF w/ Struts.
http://www.oracle.com/technology/pub/articles/masterj2ee/j2ee_wk8.html

How can I remove my account on an iPad and add an existing one

how can I remove my account on an iPad and add an existing one

Or, how can I change the account on an existing iPad without restoring / formatting it?

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
Thanks
Jeff Pulera
Safe Harbor Computeres

HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

How to use multiple iPods, iPads, or iPhones with one computer

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

Can autonomous and LAPs co-exist?

Similar Messages

Maybe you are looking for