Can B2B be setup to recognize message w/o MSH.12 Version ID

I'm getting some really poor messages from a source. One of the key things missing is MSH.12 which I know b2b uses to identify the agreement. I don't see a way to set up a document definition that isn't associated with a version. So I don't see how I can have b2b ignore the version matching and just go against msh.3 and msh.4 and the MSH.9 message type. Does anyone know of a way to set this up?
Thanks,
Dan

Unfortunately, even though this should be an error condition I still need to process the message. All the messages from this source are with out version ids. So I was hoping for a work around. Oracle B2B uses the MSH segment information to extract the Document Type and Revision information to identify a document and hence an agreement (in case of Inbound processing). So document should be well formed. If in your case it is not possible to send these information(MSH), then instead of using HL7 standard, you may use Custom document protocol to implement the same but in this case you may not get benefit of HL7 (and MLLP) specific features of Oracle B2B.
Regards,
Anuj

Similar Messages

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

MacBook Pro OSX 10.9.4 - can't open document in pages - message says need updated version and there aren't any

MacBook Pro - OSX 10.9.4 - trying to open document in pages. Message says can't open with this version - go to app store for update, but there aren't any updates.

Hope apple can fix this soon if new patch 10.9.4 cause this.
Apple cannot fix problems they did not create. Eset and Avast are capable of doing nothing beneficial and can only cause problems. Uninstall it and determine if the problems subside.
Use Avast's uninstaller, which will remove it completely. Eset requires using the uninstaller included with its downloaded installation program (see screenshot):
Eset will also require manual techniques to uninstall components its uninstaller leaves behind, a common characteristic of poorly written software.
I am now can access an internet, with zero security.
It's a common misconception that you have "zero security" without junk such as Eset or Avast. OS X already includes robust protections against viruses and malware. Use your Mac the way it was intended to be used - without burdening it with useless garbage.

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

How can I get RoboHelp to recognize my FrameMaker installation?

I have Technical Suite 3.5 installed and several RoboHelp projects linked to FrameMaker books.
The Frame books were created in FrameMaker 10. I then upgraded to Technical Suite 3.5, then later upgraded my FrameMaker to 11.
All was well, RoboHelp continued to update from the Frame book files.
Then last week my hard disk crashed. IT provided a new disk, installed the Technical Suite and FrameMaker 11, but now when I open the RoboHelp projects and try to update them, RoboHelp displays an error message that says "Adobe FrameMaker 10 is not installed. No FrameMaker documents can be updated."
When I try to relink the project to FrameMaker (File | Link), I get a similar message: "This operation cannot be completed without FrameMaker 10. Install FrameMaker 10 and try again."
How can I get RoboHelp to recognize my FrameMaker 11 installation, which it used to do prior to the crash and reinstallation?
Thanks.
Jerry

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

Can't get itunes to recognize my iphone

I'm a total newbie, just got my iphone 3G yesterday, I've read through all the troubleshooting but I still can't get itunes to recognize my iphone. Either nothing happens, like a device isn't hooked up, or it says that the "mobile device has not been activated" Hopefully this is a simple issue that I'm just overlooking, any advice would be greatly appreciated. Thanks!

I do realize I'm talking to myself here haha. Well, now it seems to be even weirder because I juet kept trying and trying and it finally recognized the iphone but then after I start syncing, it cuts out after about a minute or two and I get an error message saying there was an "invalid response recieved from the device". So I hooked it back up and it recognized it again (after several tries) so I hurried and manually tried syncing some of favorite songs and then it cut out again, when I checked the phone only the ones I added the second time were there, the first round of syncing had been erased. It's a vicious cycle I'm in here! I had this phone for a day and I HATE it!! I'd rather have my dinky little razor phone that at least had video and zoom capabilities. So far all I want to do is take this thing and chuck it into the street!

B2B-50079 Transport Error : Bad Message

Hi All,
I have an SFTP outbound TPA which is used to transfer a PGP file from our internal system to TP vendor.
So the transfer is as follows B2B(Internal System) -> WebServer(acts as proxy while connecting to third party server)-->ThirdParty.
The use proxy is checked in the Channels of the Trading Partner.
The transfer fails while transfering the file to the TP with the below error.
"B2B-50079 Transport Error : Bad Message" I have manually sftpd from web server to the TP server and it is working absolutely fine.
Also i have verified that the certificate and host,port username details to connect to the TP are correct.
Please let us know on what the problem area could be.
There is no problem with file naming convention since the file is getting picked up by the listening channel and also we have checked the preserve file name option in the TP channel.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.

Thanks Anuj for the response.
We already have the required patch, also its working fine with other Trading partners which uses SFTP. We are facing this issue with only one Trading partner and the same is working fine with 10g B2B but not with 11g.
Please let us know if there is any other configurations which we can check.
Thanks,
Sirisha

Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid

Can't get Netflix to recognize an iTunes purchase keeps coming us with "the credit card information that you entered does not appear to be valid'? Netflix says not them?

The message you received indicates that the phone is locked to a carrier other than the one for which you have a SIM. You'll need to take the issue up with Apple. Nothing you do with iTunes is going to make a difference.
I'm quite surprised that the UK Apple Store replaced a U.S. purchased phone. They usually won't.
Best of luck.

How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline. When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

Hi ..
Click here > Canon U.S.A. : Support & Drivers : PIXMA MP990
Then click Wireless Help
Make sure the printer is recognized in System Preferences > Print & Scan > Print
If not, download and install the drivers designated for the mp990 model.
In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

Can't execute setup.exe on PDA

hi, i'm testing simple example with Oracle817 and 9i lite database..
my problem is that i can't execute setup.exe on my PDA...
i packaged new application by only importing scott.emp tabale with wtgpack.exe
then i set user priviledge and parameter in the mobile server control center web page..
i downloaded mobile client for wince on strong arm cpu...
while i packaged mobile application there was no exception or error messages..
but i can't execute downloaded setup.exe file for installing mobile client.. though..
only it's not proper wince application sign can be seen on PDA..
PDA that i use is with strong arm sa-1100 cpu and windows CE 3.0(build 126)..
but it's not compaq or any other well known product though..
anyway.. anyone had this kinda situation..?
please help me out..
thank your in advance..

When I turned my computer on I had the setup.exe shortcut on my desktop (0 bytes), and can't delete it.
good lord. this is precisely the second time i've ever seen this reported. (the other chap i saw with this ended up with two such icons on his desktop, if i remember correctly.)
Katrina: am i remembering this correctly?
what eventually worked for him was downloading and installing a copy of Pocket Killbox, which he eventually managed to use to get rid of the beasts.
keep us posted.
love, b

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers. When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't. The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network. What am I doing wrong?

Hello @JiffyFingers and Good Afternoon
From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
Hope that helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Setup Stops Running Message When Installing CS3

I get "Setup Stops Running Message" after Disk 1 completes and asks for Disk 2 when I try to install CS3 Master Collection. This is new Dell Vostro 270s PC with Windows 7 Professional that replaces a HP running Windows 7 Home Edition. CS3 ran OK on the HP. Suggestions?

Tommy5017 what happens when you insert disc two? If you need a new copy of the installation files you can follow the directions at http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html. Please make sure to complete the Very Important Instructions prior to scrolling down the page and clicking on the download links.

I just purchased a new ipod touch 4g. I can not get itunes to recognize it. Everytime I try to connect it to my pc it recognizes it as a camera. Any suggestions?

I just purchased a new ipod touch 4g. I can not get itunes to recognize it. Everytime I try to connect it to my pc via usb cable it only recognizes it as a camera. Any suggestions?

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

HT204380 I can't access my FaceTime and messages through my iPod touch, I need help please!!!

I can't access my FaceTime and messages through my iPod touch, I need help please!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

AS2(SOA-B2B) Channel Setup for Inbound/Outbound

Hi
Can anyone share a document on how to setup AS2(SOA-B2B) Channel Setup for Inbound/Outbound? We are trying to configure AS2 (SSL), but test with partner is failing.. any document would help...
Appreciate your help
--Sri

One options is to use a java callout in the inbound agreement.
Ismail M.

Can B2B be setup to recognize message w/o MSH.12 Version ID

Similar Messages

Maybe you are looking for