Can barely hear the other person when talking on the phone

when using the phone function i can barely hear the other person on the line.. the speker volume is at the max.

remove the thin plastic cover, its not the protective kind its a shipping one. It is covering you ear piece.

Similar Messages

  • When i want to call somwhone with my i-phone, i only hear the other person, if i press the loud-speaker. does anywhone know, how i can solve this problem

    what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem

    Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
    If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers

  • The calls i make go through, but i don't hear it ringing or the other person when they answer. how do i fix this?

    The calls I make go through, but I don't hear it ringing or the other person when they answer. I can't hear anything when I make the phone call. How do I fix this?

    I have had similar issues.  Have you gotten any resolution?

  • When I make a call, i can't hear the other person, when I get a call, I can hear them and they can't hear me. What's up?

    when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?

    Hello there, Maribelita.
    The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Can any1 help i hav Iphone4 nd the volume whn i call the volume is low i can barely hear the other person, i try using the volume key bt it dont work? help plz

    Can any1 hlp i hav an IPhone4 and the volume is so low i can barely hear the person frm the other phone, i try using volume bt it dont work?

    Did you try turning up the volume button on the left side, Also go into your settings>sounds and try to change the volume. 

  • Can bearly hear the other person when I make a call...

    When I make a call from my iPhone the other
    end is very faint. I'm sure theres some wicked
    simple solution on like the settings or something
    but I can't find it! Any suggestions?

    the other person can hear you fine, but you can't hear them?
    the simplest thing is the volume rocker on the side, while you are on a call make sure your volume is adjusted all the way up.. after that make sure you don't have the plastic covering the speaker
    after those try a soft reset by holding the home button and the sleep/wake button until you see the apple logo, if that doesn't work try a restore from itunes.. if you are still having the problem after that it is time to call apple 1-800-myiphone

  • TS4268 I can't hear the other person when using FaceTime

    I Am able to connect to them but all I hear is a crackling static sound. My iPad is unmuted and the volume is turned up, I am pretty sure it's not my Internet connection because I have never had a laggy connection. Any help would be appreciated.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    The other person could have dust in their Mic hole. Use a vacuum to remove the dust.
     Cheers, Tom

  • I can't hear the other person while facetiming on the Imac

    I cant hear the other person while face timing on my imac but they can hear me

    HI,
    There have been similar issues with iChat and I will use that as an example first.
    In iChat the Mic needs to be On (in the Video menu).
    It also needs to be listed in iChat Menu > Preferences > Video section > Microphone Drop down and this needs to match ther Mic set up in System Preferences > Sound > Input.
    In addition to this the Mic needs to be "turned up" high enough in the System Preferences to work with the app.
    So If you Buddy cannot hear you it is your Problem when it comes to iChat.
    If you cannot hear the Buddy it is much more likely that they have not set up the Mic in System Preferences or have the Mic Off in iChat.
    Moving to FaceTime you will find a Mic Setting in the Video menu (if you have two or more Mics).
    If you do then the System Preferences > Sound > Input  and the volume setting there needs to match the choice in the App.
    As it is your contact that you cannot hear you need to get them to check their settings first.
    As for your end, it will be worthwhile doing a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    9:06 PM      Thursday; June 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Cannot hear the other person when using Skype.

    When receiving a video message via Facebook (skype) cannot hear the other person. They hear me but I don't get any sound. Please help. Thank you.

    Both of you can take a look at this help Guide from Skype:
     Making a video call (Windows desktop)
    Kind Regards,
    Dragon-Fur

  • Recording Audio...Can't hear over other tracks when recording!!

    Hello again and thanks for the help. So why, when I'm recording audio, a guitar for example, is the signal so low I can barely hear it above the other tracks. Then, all of a sudden, when I play back what I recorded it almost knocks me back off my seat it's so loud. How do I turn up a track i'm recording enabled track so that I can hear better what's being recorded? This is a problem I've run into myself and when I'm recording others, like a vocalist. I need some way to turn up a "cue" send level even if it's coming out the same monitors that the rest of the mix/track/song is.
    Any tips would be much appreciated. THANKS AGAIN

    I understand that this is directly related to my monitoring capability but am assuming there's some way, INSIDE of Logic, that this level adjustment can be made. Why, when recording, can you barely hear a signal and then when a track is automatically set to 0.0 dB it is much much louder. Why the difference.
    I, too, have a MOTU 828mkII. Admittedly not as good with it as I should be, I need to work more with my monitor mix but this situation seems to often be used to dodge my real question ^ up above. Any tips or tricks are much appreciated so that's cool, but see if you can at least shed some light on what I'm confused about up there^^^^^^
    I DO NOT want to use headphones to record this guitar. Feels more natural for me to record directly into Input 1 of the 828 and hear all the tracks coming out of my monitor while I'm recording the guitar over it. Again, why so quiet when recording and why, then, so loud when no level adjustments have been made when playing back the audio. Again, no level adjustments made on anything and all of a sudden the most recently recording track is louder relative to all others
    thanks

  • HT4528 I just got 2 iPhone 5 . We can barely hear each other in them unless we put on speaker phone, then every one can hear. Is there somewhere to turn up volume for hearing without using headphones? It 'sounds' as if theyre in, and Im just holding in my

    I just bought 2 iPhone 5 s. I can barely hear the person on the other end unless I turn on the speaker phone..then every one can hear. I cant find a way to turn up hearing volume. Tried blue tooth on/ and bluetooth off. Phone ring is set high. Both phones are having the same problem, so must be missing something?

    thanks, that seamed to work. I had the volume turned all the way up but I guess maybe I needed to repeat that while using phone, sort of two step.. good to know

  • Can't hear the other person when I am talking

    WHen I am using Skype or FaceTime on my iPad, I can only hear the other party speak if I am silent on my end.  I have to keep asking them to repeat because I can see their mouth moving but I can't hear them. In other words, the sound only works one way at a time.  Is this normal, or is there a settings change that make so that sound works both ways at the same time?  Is it a hardware or a software limitation?

    I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update

  • I can't see the other person when using facetime but they can see me just fine, how can i fix this?

    When I use facetime with my fiance on my brand new macbook air she can see me but I can't see her. Please help me remedy this problem, I have verified that I am logged into facetime and connected it with both my ipone5 and my email but haven't seen any changes.  It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.  Thank you for your help

    Frogmanian wrote:
    It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
    MacBook Air does not run iOS.  It runs OS X (pronounced as in OS - ten).  You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac".  The current version is OS X 10.8.4.  If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
    Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection.

  • I can't see the other person when I video chat! and its reallly annoying!!!

    I can hear them, and they can see/hear me. It kinda stalker haha. So basically I tried to change the bandwith limit to 500 kbps, and under quicktime preferences changed the streaming to 1.5 mbps. AND THE SAME THING KEEPS HAPPENING. This has been going on for like a month, I called an apple guy and hes a moron. Can anyone fix this?? I used to be able to 3-way vchat and see everyone and no i can't do anythingggggg. PLEASE HELP ME?!?! Thank you so much,
    Mike

    Hi,
    Welcome to the    Discussions
    DO you have Perian at version 1.1.3 installed ?
    If Backdate it to version 1.1.2
    http://www.apple.com/downloads/macosx/video/perian_christopherforsythe.html
    (Go to System Preferences an Perian and use the Uninstall option > use the link and install > DeSelect the automatic Update option).
    9:30 PM Monday; February 2, 2009

  • HT4623 I downloaded the new ios 6 and I like it but now I can barely see my videos. When I turn the Ipod to the side my album cover shows up and it won't show the vidoes. How can I fix this?

    How do u get rid of the album cover when u turn your Ipod to the side to watch vidoes. I downloaded the new ios 7 and now I can't watch my vidoes.

    Based on other posts, the misic videos no longer play in landscape mode. You get the album covers as u describe.

Maybe you are looking for