Can be edit the equipment category field in equipment master
Dear all
Please help me , i want to change equipment category in equipment master .
this is possible?
Raghav
In the equipment master IE02 transaction go to the menu options:
Edit -> Change Equipment category (Shift+F4).
System prompts a new screen to enter the diff category.
Praveen
Similar Messages
-
How can you edit the Email Address field in Mail without deleting the account?
I have a few accounts and the email address domain of my work account has changed but it seems to be one of the fields you cannot change.
On my iPhone it was simple ... you can just edit the field and it works.
My Email comes in fine but mail auto selects accounts based on the domain of who you are emailing and now that it has changed its not doing that anymore.If you're running iOS 6, to change your iCloud ID go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll. -
How to get the position category field from PO13?
Hi all,
Anyone knows the logic of retrieving the Position Category Field? I am given the Person's position p0001-PLANS
Goto Tcode Po13.
Enter plan version: 1
Position: pernr (70000002)
Click on general attribute maint. infotype
I need the value displayed. It is from structure PT1222-low
May I know from where structure PT1222 takes values from?
I have checked the table HRP1222. Somehow there is no field to indicate the position category.
The structure for the general attribute maintenance
Edited by: Siong Chao on Jan 9, 2012 10:37 AMHi,
You can get the data from the tables HRP1222 and HRT1222. Read the TABNR value from HRP1222 and use the TABNR to get further data from the table HRT1222.
~~~Ganesh Kumar K. -
while generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)
Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT -
While generating a crystal report can we edit database files in field explorer ?
Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
MahendraWrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT -
I can not edit the form that I am filling in
I can not edit the form that I am filling out. I saved it to Desktop and was allowed to fill it in. But I can not erase some words that I want to change.
Are the words you want to change in form fields that you previously typed in?
-
Warranty Date field in the equipment master data
Hi everyone!
I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
Thank you very much.Marlon,
Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
Regards
Narasimhan -
Enable the product Category field as dropdown in Approval page of shopping
Dear All
Can anybody tell me how we can make the "Product Category" field enable as a drop down in the Approvers page. I have a requirement like this. I need to make only that field in "Basic data" as enabled and capture what the user selects in the dropdown. I tried using the badi BBP_UI_CONTROL_BADI (method BBP_SC_UI_CTRL) but could not help me. Please suggest me in this regards.
Thanks
Vijay.MThanks, resolved.
-
Can I edit the size of my photo when setting up an email signature?
Can I edit the size of my photo when setting up an email signature?
Not sure what you mean by "photo screen?" Do you mean your Photo Stream?
In the Photos app there are several ways to view the photos. Tap on Albums. Your Photo Stream is one Album but there may be others including the Camera Roll, albums made on the iPad with photos from the Camera Roll, and albums of photos copied to your iPhone by syncing with your computer.
To remove albums from the Camera Roll, tap on the Camera Roll album to see the small thumbnails of the photos there. Tap on Select, tap on the photos to delete, then tap on the trashcan. The photos will then be moved to another album called Recently Deleted. They remain there for 30 days to allow you time to reconsider whether you really want to delete them or not. After 30 days they will automatically be deleted from your iPhone. But if you are sure you want the photos deleted from your iPhone delete them again from the Recently Deleted album.
Albums created on the iPad with photos from the Camera Roll can be deleted in the same way.
To delete albums copied to your iPhone by syncing with your computer running iTunes are deleted by doing another sync. But before you click on Sync deselect the albums in iTunes. Then when you click on Apply or Sync the albums will be removed from your iPhone but they will remain on your computer. -
Can I edit the rpt file & change the datasource before loading the report?
We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
ThanksHI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
// Check the kind of the ReportObject, if it is a subreport
// proceed. If not skip.
if(crReportObject.Kind == ReportObjectKind.SubreportObject)
// Get the SubReport in the form of a ReportDocument
string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
// Use a loop to go through all the tables in the main report
foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad -
How can I edit the file name of the home page?
How can I edit the file name of the home page?
Gr AmmaniI have a similar issue with regards to the filename...
When I navigate to my website, it doesnt work unless I actually type the filename at the end of it. Example: type in "www.whitelion.com" (this is my real domain name) and it doesnt work. When I type in "www.whitelion.com/index.html" then it works.
This is obviously inconvenient because my clients will never know to add the filename to the end of the site.
Is there any setting or way to get the page to appear by just typing the original domain name without adding the extension?
Thanks,
Emelia -
How can I edit the password entries?
How can I edit the values in password manager? Right now for at least one site has the username instead of the password.
Note that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox with a possible feed.snapdo.com infection.
The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
You should check its content with a plain text editor if you didn't create this file yourself.
The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
*http://kb.mozillazine.org/Preferences_not_saved -
How can i find the value category code in CJVC
Hi Gurus
how can i find the value category code in CJVC and which tables its stored.can any one tell me.please pleaseRead TPIK3 in an internal table, then search COEP-KSTAR in this table, with KSTAR between TPIK3-KSTRF and TPIK3-KSTRT, and other keys like Controlling Area and application/component (eg "PS" in project-system as in CJVC or "PM" in Maintenance as in IW33, multiple application use this table). You can also use a FM like PS_FIND_ACPOS_FOR_KSTAR.
Regards,
Raymond -
I moved some pictures from my photo stream to an album in iPhoto. The photo stream icon didn't disappear and I can't edit the picture .
Welcome to the Apple Community.
Moving photos from photostream to your library just imports them, it doesn't remove it from photostream, therefore photostream won't disappear.
Photos in photostream can't be edited, you can only edit photos that have been imported from photostream. -
How can I control the Product Category in the Pre-select screen
Dear ,my expert :
I work in ROS scenario . In my case ,the supplier can select Product Category A, Product Category B,and Product Category C when they filled the data in the registration scren . And the purchaser A just is responsibility for the Product Category A ,and the purchaser B ,C are the same situation .
So ,my question is :
1,How can I control the Product Category in the Pre-select screen? I mean that the Purchaser A can just select the Product Category A in the Pre-select screen .
2,You know the supplier select two category is one BP in the system ,So if the purchaser A accepe the supplier ,the purchaser B will find the status is "accepted ",So the purchaser B will be confused about it .
SO ,in my case ,any one has the suggestions ,any link welcome .
Bestregards
alexHi Alex,
As per standard SRM solution, this is not supported. Purchasers who accept new suppliers, accept them on the whole and not for any specific product category. There is no such thing as Purchaser being responsible for specific prod category in ROS.
What you could do however is to build a custom workflow to achieve it. You could have category approvers after the purchaser has accepted the supplier. Based on the category provided by the supplier in the reg form, you could route these suppliers to appropriate category approvers.
Regards,
Nikhil
Maybe you are looking for
-
At my wits end can any one save xmas for me Re K6Delta LSR And lock ups
Hi Guys, Right i have built a pc for the kids but when i try to get it to run it locks up randomly. Spec 80 gig seagate baracuda 7200 rpm Amd Athlon 2800 XP CPU Copper King Cpu Fan 512 DDr 400 Mhz DVD Rom DVD 106 RW ATI 8x AGP 9600 Radeon Pro Latest
-
sames as the question....tell me how to remove....thanks
-
Have to Force quit Mail & cannot delete certain messages
I know some folks have already posted about this, but I've yet to find a solution. My mail continues to download the same, previously deleted messages each time I open it. I also have to force quit mail to leave it. It will download new mail from my
-
Spatial query runs slow on view
Hello, I have two tables and one of them has geometry column. I created view to join those two tables based on id column which has been indexed for both tables. t1( id number(9), name varchar2(20) t2( id number(9), geom MDSYS.SDO_GEOMETRY CREATE VIEW
-
Multiple GR Per Excise Invoice
Dear Sir, My scenario is, PO1- X Material PO2- Y Material, for same vendor. The delivery comes for both material against both PO against same Excise Invoice,same excise invoice date & on same date. When i enter GR for first Xmaterial it is properly