Can BI Publisher 10.1.3.3 Standalone be installed on Windows XP?

My first installation failed. After I copied installation files to a shorter directionary path the installation ran successfully. But when I tried to login, it showed "the login failed..."
In the installation guide - part No. E11867-01, BI publisher 10.1.3.3 installer's requirement OS has Window 2000 server, window 2003 server.... but didn't have Window XP. Does it mean we can't install BI Publisher 10.1.3.3 Standalone on Windows XP? Is my loggin's failure because of Windows XP?
Are there anybody who login and used BI publisher 10.1.3.3 in window xp successfully?
Please Help. Thanks.
- Jessie

Thank you very much. Your words reminded me. I checked file for username and password. This time I used "Administrator" instead of "administrator" and was be able to logged in.
Thanks again.
- Jessie

Similar Messages

  • Can't start the tns Lisenter -oracle xe 11g installed on window 7 64 bit

    Hi
    I have followed the below website's advise installed xe 11g R2 on my window 7 64 bits.
    http://blog.mclaughlinsoftware.com/2011/09/13/oracle-11g-xe-installer/
    It worked at the time when I installed. but the next day, I restart the pc , then I can access to the SQL common line window, I tried to start the tnsLisenter service from the control panel, then there is an error :
    The oracleXETNSListener service on local Computer started and then stopped. Some service stop automatically if they are not in use bu other service programs.
    of course, I am not able to connect to the home page too.
    http://127.0.0.1:8080/apex/f?p=4950 ---- page not found
    Lisnter file:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST =127.0.0.1)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    Can anyone help?
    many thanks

    Lang wrote:
    Hi
    I have followed the below website's advise installed xe 11g R2 on my window 7 64 bits.
    http://blog.mclaughlinsoftware.com/2011/09/13/oracle-11g-xe-installer/
    It worked at the time when I installed. but the next day, I restart the pc , then I can access to the SQL common line window, I tried to start the tnsLisenter service from the control panel, then there is an error :
    The oracleXETNSListener service on local Computer started and then stopped. Some service stop automatically if they are not in use bu other service programs.
    of course, I am not able to connect to the home page too.
    http://127.0.0.1:8080/apex/f?p=4950 ---- page not found
    Lisnter file:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST =127.0.0.1)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    Can anyone help?
    many thanksWhich Windows Edition do you have?
    It is not clear to me what have.
    Are OS Services for both DB & Listener started?
    open Command Window & issue the following OS commands
    lsnrctl start
    lsnrctl status
    lsnrctl service
    COPY commands & results then PASTE all back here

  • Lenovo g550 can't use wifi or video card after clean install of windows 7 from generic iso

    My hard disk crashed and I didn't have the restore cd, and windows doesn't see the WIFI or Video card now. I've updated the drivers from support but it still work see them. I haven't tried updating the bios version yet. Is there a step i'm missing?
    Solved!
    Go to Solution.

    Hi Ryan!
    Welcome to the forum. Please post a picture of device manager. That will give a much better idea of what's missing.
    It is always best to install drivers in the following order. Chipset, Audio, Video, Ethernet, Energy Management and then the rest.
    http://support.lenovo.com/en_IN/research/hints-or-tips/detail.page?DocID=HT072728
    Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an Accepted Solution

  • I can only see adobe installer than nothing happens while installing in windows 7*

    Having problem while installing adobe after effects cs5.5. When i click on SETUP.exe, A adobe installer dialoge box appears, its complete but than nothing happens. I installed after affects before too,but like this problem never happens.Please guide me to overcome this problem.

    You need to provide much more info about your system. Not much point to just saying that something doesn't work. Run the Creative Suite Cleaner Tool and try another install. If it still doesn't work, provide the install logs.
    Mylenium

  • XML Publisher Enterprise 5.6.2 standalone + Bursting

    Dear Gurus,
    Env details : XML Publisher Enterprise 5.6.2 standalone.
    In Xml publisher, created a report using datatemplate.
    which does create a XML file with right data.
    one of the tag in data file has email address of the Customer.
    How I can send email to this Customer email address using 5.6.2 XMLP
    Read about Bursting and control file..
    In 5.6.2 , how I can achieve this ?
    Please help .. looking for your valuable suggestions,
    Example of XML data
    <?xml version="1.0" encoding="UTF-8"?>
    <DATA>
    <LIST_MAIN>
    <MAIN>
    <CUSTOMER_NAME>NORTHLAND POINT</CUSTOMER_NAME>
    <CUSTOMER_EMAIL>[email protected]</CUSTOMER_EMAIL>
    </MAIN>
    </LIST_MAIN>
    </DATA>
    SJK

    Note:418234.1
    At the time of writing this note Internet Explorer version 7 running on Windows Vista is not certified for use with Oracle AS. This certification is planned.

  • Can Bi Publisher handle CLOB values?

    Hello,
    I've a requirement to generate a letter/report from BI Publisher(Standalone version) in which the Data Template includes a sql query to extract data from table which has clob value? Can Bi Publisher handle clob values? Please guide.
    Thanks.

    Can anyone please advise me if i can create a Data template with SQL query to extract the clob data from a table? and generate a report in pdf format? Am not sure if BI Publisher handles CLOB values?
    My version is Oracle BI Publisher 10.1.3.4.0 (stand alone).
    Please guide.
    Thanks.

  • Publish Button Greyed out for Standalone Option

    I'm using Captivate 3.0 for my project. I'm attempting to
    publish my project using the Standalone feature. Unfortunately, the
    Publish button is Greyed out. It doesn't matter what the file name
    is, where I'm saving it, what's checked or unchecked...the button
    is just greyed out the whole time.
    How can I enable the Publish button through the Standalone
    feature?
    Thanks in advance!

    Hi all
    Have any of you tried upgrading the Flash Player version on
    your PC? I notice from the screen capture, that Flash Player 6 is
    selected, but disabled. Normally Captivate 3 only offers versions
    7, 8 and 9 as an option. At first, I saw version 6 listed here and
    thought that perhaps Captivate 2 was being used, as it was the last
    version that offered the ability to publish in Flash Player 6
    format. But I then noticed that the File Type of Windows Executable
    wasn't selectable as well as the dialog showing Adobe Connect.
    These are indicators you are using Captivate 3.
    So the only thing that seems to make sense is that perhaps
    you have Flash Player 6 on your PC and need to upgrade it.
    This
    link should take you to the Flash Player Download Center, where
    your version in use should be reported and you will have the
    ability to install a newer version.
    Let us know how it goes! Rick

  • How can I Publish to a Folder just one of the several websites I have created using iWeb?

    How can I Publish to a Folder just one of the several websites I have created using iWeb?
    it drives me nuts having to emove all the other websites when I want to upload one. 
    Sparrow

    For iWeb, I like to do only one site per domain file.  I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
    I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
    iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
    Here are a few of my iWeb sites:
    http://www.newcovenant.org
    http://www.visionmultimedia.org
    http://www.visioncomsolutions.com

  • Can XML Publisher add a digital certificate (cert.pfx) via the xdo.cfg file or do I need to upgrade and use BI Publisher instead?

    Hi Guys
    I need to add a digital certificate to a clients customer statements and invoices. XML Publisher 5.6.3 has been used originally to design the templates as RTF. I have the following questions please...
    1. Can an RTF template be used or do I need to convert it to a pdf template?
    2. Can XML publisher even be used or do I need to get the DBAs to install BI Publisher. XML Publisher doesn't even have the signature properties in the admin screens that BI Publisher has.
    Below is a copy of the xdo.cfg file which currently does not add the pfx file...
    <config version="1.0.0"  xmlns="http://xmlns.oracle.com/oxp/config/">
    <properties>
       <property name="system-temp-dir">/tmp</property>
       <property name="pdf-security">false</property>
       <property name="pdf-open-password">testpass</property>
       <property name="pdf-permissions-password">testpass</property>
       <property name="pdf-encryption-level">1</property>
       <property name="pdf-no-printing">true</property>
       <property name="pdf-no-changing-the-document">true</property>
       <property name="signature-enable">true</property>
       <property name="signature-pkcs12-path">/app/oracle/product/appldev/apps/apps_st/appl/xdo/12.0.0/resource/digcert.pfx</property>
       <property name="signature-pkcs12-password">testpass</property>
       <property name="signature-field-location">top-left</property>
       <property name="signature-reason">taxreasons</property>
       <property name="signature-signed-at">Cape Town</property>
       <property name="signature-display-style">detailed</property>
    </properties>
    </config>
    Any help will be greatly appreciated.

    thanks for the summary of the many posts and threads describing all of these steps.

  • I upgraded from iWeb '06 to iWeb '09-now I can't publish to a folder

    I'm having 2 issues after upgrading from a powerbook G4 running Tiger with iWeb '06 to a macbook pro running Snow Leopard with iWeb '09. I migrated my website created with iWeb '06 over to iWeb '09 and I'm having 2 issues.
    1. Every page in the website brings up a window that says "The following errors occurred while trying to open this document: Type: Substituted Font; Description: The font "Arial-BoldMS" was substituted for..."
    Then it says "To include missing fonts, add them to your fonts folder, then quit and reopen iWeb."
    This happens every time I open iWeb, even after I click "Continue" in the dialogue box. Where can I find the font that is being replaced--it doesn't list it in the dialogue window. And how can I download it to add to my fonts folder?
    2. When I try to "Publish Entire Site" or "Publish Site Changes," a dialogue window pops up saying "Publish Error: Can't create the file "index.html." The disk may be damaged or full, or you may not have sufficient access privileges."
    I am the administrator user, so that's not the issue. I have over 300 GBs of free disk space, so that's not the issue. The disk is not damaged because everything else is working just fine.
    I am not familiar with the way iWeb '09 publishes. In iWeb '06, when I selected "Publish to a folder" from the File drop down window, it brought me to a screen in order to select a folder to which to publish. That feature is gone in iWeb '09, with the "Publish entire site" and "Publish site changes" taking its place, but I don't see where it has options to configure FTP or even input where you want your site to go and what domain name it is. How do I direct iWeb to publish the site to a folder or upload it to my Godaddy.com web host?
    Thanks for your help.

    For the font problems, try the "Safe Mode" suggestion in this old thread:
    http://discussions.apple.com/thread.jspa?threadID=1956989&start=20
    ...Found by doing THIS. Also see this Apple doc:
    _Mac OS X: What is Safe Boot, Safe Mode?_
    ...Found by entering "safe mode" in the first field here:
    http://support.apple.com/kb/index?page=search

  • How can I publish photos to more than one Facebook account?

    How can I publish photos from iphoto to more than one Facebook account?  Another way to ask is how to add a second Facebook account to the account list in iphoto?

    Open iPhoto Preferences, click on the "Accounts" icon, and add another account.

  • How can I publish a photo book using an iPad

    Can someone walk me through publishing a hard back photo book using an iPad .I have iPhoto app installed

    I don't believe you can create and publish a book directly from the iPhoto for iOS app. You can create a journal which can be published to iCloud, but that's the only sharing feature I can find. There may be third-party software that can do this; the HP Photobook App has been mentioned, but I know nothing about it. Otherwise, if you want to create a book, I think you'll have to transfer your photos to a computer and use software there (iPhoto for Mac OS X, if you have a Mac).
    Regards.

  • How can I publish an ics file to a remote server from my calendar server?

    I am running Lion Server and have Calendar Service up and running. I have an account with a couple of calendars, one of which I'd like to publish to a remote server, as an .ics file.
    From an iCal client it is possible to publish local calendars, but not remote calendars (for which the only option seems to be to 'Share').
    How can I can I publish an ics file to a remote server? Programatically, if necessary.

    I have this working now.
    curl -s --digest -u username:password -o calendar.ics http://hostname:8008/calendars/users/username/calendar/
    generates the .ics file, and a combination of cadaver (from webdav.org) and an expect script upload hourly (via cron) to the remote server:
    set timeout 60
    spawn /usr/local/bin/cadaver
    expect "dav"
    send "open https://remotehost/path/\r"
    expect "Do you wish to accept the certificate? (y/n)"
    send "y\r"
    expect "dav"
    send "put calendar.ics\r"
    expect "dav"
    send "close\r"
    expect "dav"
    send "quit\r"

  • How can I publish an App to a selceted group of people without using the Adobe Contetn Viewer?

    How can I publish an App to a selected group of people ( not via App Store) without using the Adobe Content Viewer?
    The App was developed with InDesign 6.0

    You'd have to sign up for an Apple Developer account and then gather all the UDID's (Apple limits this to only 100 devices) that you want your app to be installed on. Create your mobile provisioning profiles to include these ID's and then you could use TestFlight to push out your app and monitor who has installed it. Of course Testflight is intended for monitoring your apps performance but I'm sure you can get away with it if you use it to push you app. One thing to keep in mind is the mobile provisoning profiles are only valid for 1 year. Hope this helps.

  • I can't publish to iWeb, it doesn't seem to be able to login to my icloud account. any ideas?

    I've been trying to publish a site on iweb. It seems that iweb is unable to sign in to my icloud account. I push the publish to mobile me tab, push the sign into your account tab,( already a member). I get the barbers pole for 30 seconds or so, and then, nothing happens.  Any ideas anyone?

    MobileMe closed in July last year.
    iCloud does not offer webhosting.
    You have to find a webhost.
    It's been discussed for the past 2 years in this forum, the MMe forum and all over the planet.
    Browse this forum.
    In short :
    Find a webhoster.
    And since you use iWeb 08, publish to a folder and use an FTP app to put the files on the server.
    Oh, and look to the right. I see these topics :
    More Like This
    I'd like to publish an iWeb site within iCloud account.  How do we do this please?
    publish web site to mobile me icloud
    cant publish to mobileme
    MY Iweb Wont publish to my .mac account
    Can' t publish my iWeb

Maybe you are looking for