Can bluetooth work while using lightning output?

Hi there. I have an ipod controller on my motorcycle for thumb control over volume and fast forward. this controls the stock stereo in the front fairing by the handlebars. It uses the lightning output on my ipod nano. I have the new nano with bluetooth.
I also have a trunk with another amp and speakers. My question for the community is, could I use a bluetooth reciever for the rear amp while the ipod is being controled by the thumb controller that plugs into the lightning output for the front amp?
does plugging into the lightning output turn off the bluetooth as it does the 1/8" jack output?
I tried plugging in the rear stereo with the 1/8" output but it doesn't work at same time as lightning output.
I hope the bluetooth works with the lightning output cause it would save me having to open the housing for the front amp and hardwiring it to the rear amp. I have the trunk on quick release and would like to take it off when I don't need it.
This could save me from buying a bluetooth reciever and having it not work. thanks for your time!
Peperlake

Hello? is there anybody in this community? Does apple monitor these questions cause I tried to contact apple with this question and all I get is bull $%*! automated phone systems. I even drove to the local apple store and asked this question and nobody could answere it. I even asked them to try to make a demo model do this to see if it works and while they didn't refuse to try they frustrated me so much with thier complete ineptetude that I left.! What the **** apple? I guess I'll just have to buy a bluetooth try it and then I'll let you know right here on this post. If it doesn't work I'll be sending apple a bill for my customer service I provided for their customers!

Similar Messages

It didn't work while using command "start /wait msiexec /i AcroRead.msi LANG_LIST=CHS;CHT /qn"

Hi,
It didn't work while using command "start /wait msiexec /i AcroRead.msi LANG_LIST=CHS;CHT /qn" to install Adobe reader XI for MUI support. The MSI version is the latest version "AdbeRdr11000_mui_Std".
could you please help to provide a solution for MUI install support?
Thanks!

Thanks Jeff for helping.
The version of the install software is definetely 32 bit. eg its PremiereElements_10_LS15_win32.exe with the corresponding win32 zipped file.
BTW the fact that I can extract the files and then run the program as a stand alone program means I think? that it is the right version and can run on this computer. Its obviously an install issue it seems.
The version of XP i have is XP prof sp3 version 5.1 build 2600.xpsp_sp3_gdr.101209-1647
Based on your comment regarding the install version, I found and downloaded the 4.5 version of the msiexec software. Tried to install the PE again and got the same error ... EXCEPT that now the output comes from the 4.5 version instead of the previous version. eg.
Windows ® Installer. V 4.5.6001.22159
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
etc etc.
So obvously the new installer got installed, but still the install process doenst work.
Any further ideas.

Microphone not working while using handset

microphone not working while using handset
But it is working when loud speaker is On
Y
Wat to do??
Kindly revert with your comments

Repair the phone with PCC and report back PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

My autofill does not work while using Safari. Have checked both Safari and Apple settings.

My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

Wha should I do if my built in microphone in my iPad won't work while using garage band

My mic works just fine while using Siri, but when I use garage band I doesn't. Like when I try to record my voice and I play it back, it's completely mute? Does anyone know how to fix it?
If you can
Thanks a million!

Is your microphone on for Garage Band?
Settings>Privacy>Microphone

How Routines works while using Routines in Data loading?

Hi Frds,
A routine how it works in background while using in data loading?
Thanks & Regards,
Laxmi.M.

Hi Suma,
This is probably the wrong area for you to post your question. While SAP has recently rebranded some of its data warehousing solutions (Business Objects is now SAP Business Objects Business Intelligence and what was SAP Business Intellgience is now SAP NetWeaver Business Warehouse), the forum categories have not changed names.
For questions regarding Data Servers (hybrid of Data Integrator and Data Quality), you will want to post to the Business Objects > Enterprise Information Management forum instead.

On call sound volume is not working while using ha...

The volume control does not work on call while using hands free on my Lumia 800..is that a known issue?

Hi,
this is a JDeveloper and ADF forum, not an OA framework forum. We don't have the "OAGlobalButtonBean" class and thus wont be able to help
Frank

Messages not working while using Internet sharing from my iMac ... Any troubleshooting tips/approaches ?

I am connecting to the internet using the Internet Sharing from my iMac ...
The trouble is the messages in the Messages app are not sent when I am connected through my iMac ... When I key in a message and hit send a progress bar appears fills up till 90% and just gets stuck there and after a while the red exclamation mark stating the message was not sent appears ... Now if I connect through my wi-fi router or thether through my phone it works fine ... I can send / recieve messages ...
Similar points to note - Today when I tried to make an App Purchase - The security info screen ( new additon - http://isource.com/2012/04/11/iphone-app-store-security-info-alert/ ) popped up but I got a blank screen for the securtiy questions screen ... It was not loading the screen ... Some games the game center invite does not work through my Internet sharing (tried in MetalStorm) ... but works fine thorough wi-fi or thether ...
What could be the problem with my iMac s sharing? Any suggestions would be really useful /// Thanx in advance
I am running Lion ... and I have updated to the latest Airport software ...
Only thing I tried was changing the DNS ... but that s not related right ?

Powerline adapters use your home powerlines (mains a/c) to connect your devices via ethernet to your modem, they're easy to set up and the they TOTALLY fixed my ATV problem, the problem seems to be with the wireless. I've been trawling through apple discussions, and did found a workaround to my problem https://discussions.apple.com/thread/4222883?start=0&tstart=0
but its just a workaround :/

My compile shell script can't work when using flex4 sdk beta2

I worked with flex4 sdk beta 1, and the compile script worked well. for example:
mxmlc -debug=true -output=../main.swf -source-path ./src /usr/local/software/flash/open_source -- ./src/main.as
But, when i chang into beta2, it shows some errors which are about RSL things as the follows:
D:\setup_bak\flashbuilder4beta2\testFlex4.as: 警告: 此编译单元不包含在 Frame 元
数据中指定的 factoryClass，无法加载配置的运行时共享库。要在没有运行时共享库的情
况下进行编译，请将 -static-link-runtime-shared-libraries 选项设置为 true，或删除
-runtime-shared-libraries 选项。
So I use -dump-config option to generate a config xml, when i using the config xml, i got an error as the follows:
错误: 必须指定目标文件
使用“mxmlc -help”可获得有关如何使用命令行的信息。
Any one can tell me why?
sorry for my english, i don't known whether i describe my problem clearly. Thank for reading this thread.

Compile success when i set -static-link-runtime-shared-libraries=true.
I thought that the size of swf would increase a lot because of a static link, but the size is 727 byte..
yes, it is a pure AS app extends Sprite. The code is so simple:
package
     import flash.display.Sprite;
     public class testFlex4 extends Sprite
         public function testFlex4()
the compile cmd which got an error is simple too:
mxmlc -debug=true -output=testFlex4.swf -source-path ./ -- testFlex4.as
the compile cmd which works find is:
mxmlc -debug=true -static-link-runtime-shared-libraries=true -output=testFlex4.swf -source-path ./ -- testFlex4.as
When you said "file a bug", you meant "adobe bug system" at "http://bugs.adobe.com/jira/secure/Dashboard.jspa"??
I signup an account half an hour ago, but i cant login with it...and i can't get an "forget password" email..it seems that i blew it..i am so sorry for this..

Does Front Panel Audio Work When Using RCA Outputs from the X-Fi Titanium HD PCIe Sound Card?

I see that the rear panel headphone output is disabled when the soundcard RCA jacks are used.
But is it possible to have the front panel audio output work at the same time that the RCA jacks are in use or is it also disabled?
I am willing to tolerate inferior quality audio feeding my monitor and use the RCA jacks for my headphone amp.

I was able to construct a work around for this problem. A Y splitter from the RCA outputs is an option but can degrade the sound because of the uneven load presented to the soundcard.
Ten eleven inch Apevia CVTAUDIOE25 HD Audio extension cables were connected together in series to a SilverStone FP32 3.5 audio front panel bay. The extension cables were connected to the front panel audio connectors on the Titanium HD sound card and then the cables were run out of the computer case and up to the area near my keyboard. I connected the front panel audio bay to the extension cable and the bay sits next to the keyboard. When no 3.5 mm stereo cable is connected to the front bay near the keyboard the sound is normal out of the rear outputs. But when a 3.5 mm audio cable is plugged into the front panel bay audio there is sound out of the SilverStone front panel bay. The sound is still muted out of the rear RCA jacks when the plug is put in the front bay but it is only used when the main audio outputs are not required.
The function for me is that the front bay serves the same purpose that the previous front panel 3.5 mm audio extension cable did.
There are photos of this under a different user name on Audio Asylum PC Audio.

Step backward hotkey not working while using brush tool? - Photoshop CC 2014

Hi,
I'm using Photoshop CC 2014 in Mavericks. I've tried using the step backward hotkey (command+option+z) and it seems to work fine. Then I use the brush tool and it stops working until I switch to another tool. I'm a digital artist, so I move very quickly while painting, and switching out of the brush tool to step backward on something slows me down terribly. I'll switch and the hotkey works as intended. I've tried changing it to a different set of keys (for example command+z) with the same results. Is this a bug or a feature?

Usually it turns out for tablets that aren't mainstream that they just haven't updated their drivers to work with photoshop cc.
For example, most people don't have problems with wacom tablets in photoshop cc.
One other thing that could possibly be the cause besides the tablet driver is your graphics card driver.
If in photoshop cc you go to Edit>Preferences>Performance and turn off Use Graphics Processor and then restart photoshop cc, does that make a difference?
If it does then perhaps your graphics card driver needs to be updated from the maker of the card.
(not through windows updates)

Can I work while playing a DVD on an iMac?

Can I use Pages, Safari, etc. on my iMac while playing a DVD on the iMac (small viewing window of course?) Does doing so slow down the DVD player or vice versa? I'm using 10.10.1 (Yosemite) if that makes a difference.

Yes. OS X can multi-task. Depends on which iMac you have. I notice no impact what so ever on my Mac Pro.

W500 audio noise while using audio output

Hello,
Few months ago I've bought Lenovo W500. After some time realized that when I'm using an audio output in sometimes I can hear annoying noise. I've checked it with different headphones (also professional ones) and other audi equipment. Always the same.
In the beginning I've thought there are some problems with my Alsa configuration (I'm using mainly Linux) but havent time to check.
Now I've spent more time for that. I've couldn't find solution, decided to check on Windows also - there is the same problem (with exactly the same audio files/youtube videos etc.)
Checked with different quality audio files - mp3, flac, audio cd etc. Always the same.
I can hear it very good in this moovie:
http://www.youtube.com/watch?v=SaUL_7H7r40
first time noise appears at 00:02 - 00:03 and then I can hear it in almost whole time.
If I turn off all audio players etc. I can still hear annoing, quiet noise from headphones (on both OSes - Linux/Windows).
Has anyone simmilar problem?
Any solution? My W500 is ofcourse under warranty but I need it at the moment very hard, so I hope there is some solution different than sending it to service :/
Thanks a lot,
Regards.

If you discard any software related problem, your problem is over hardware.
The only solution is sending to service and the will repair it for free. Maybe the will change the entire motherboard.
Best regards.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Google apps like Gmail and most other apps don't work while using wi-fi connection

Will Blackberry apps ever be developed to be configurable to use a wi-fi connection? I would assume there is great demand for such. There are very few places I go that do not have wi-fi and I have been able to save a tremendous amount of money by going without a data plan. I got an unlocked BB Curve 8900 ( at full price) and then bought T-Mobile's prepaid 1000 minutes.
I'm using traditional Internet addresses (like Gmail) that usually have a mobile rendering for email and information. I am always seeing other apps that would be convenient to have; though they seldom work properly. They always open Browser instead of Hotspot Browser, the one you must use to go to the Internet via the same kind of access that laptops and notebooks use.
If I let the phone go where it wants; I usually end up downloading and installing an app; which then won't work. To get what works, I Go To a specific Internet address like I would using the address bar in a full browser running on a computer.
Does anyone know how to configure these apps to use Hotspot Browser?I figured out how to get my Curve to default to Hotspot Browser; so it opens first when I click the "globe" icon in the BB menu; but this hasn't worked from various apps I've tried (Facebook, Google Maps, Google Talk, etc.).
Perhaps if I download a different browser? Like Bolt or Opera?
Also, I think I should be able to use Google Voice with my Curve; but I haven't been able to figure it out yet.
I don't have the use of the GPS capability - I'm thinking that is not possible - am I correct? The same with SMS?
Can anyone advise me about what others have been able to do and how?
Thanks!

Hi
You don't say which BB you have or which carrier you use or your geographical location.
What you are asking for is full BB functionality without paying for it. I can't see RIM doing that somehow. They rely on carriers distributing the product so would be shooting themselves in the foot.
I've no doubt you feel pretty good having saved "a tremendous amout of money" but I suspect it costs you to do so. Browsing by Wi-Fi doesnt eat into data allowance meaning you have the full data allowance available when you are out and about. Oh, and you can use Hotspots.
The BB service means you don't log-in to email accounts. Emails are pushed on to the BB and for up to 10 different email accounts.You can read 10 emails in the time it takes your browser just to load the log-in page.
You can also download apps that work and many of them are free.
You can download and use whatever browser you want, it still won't get you round the problem. No BB data plan means seriously limited functionality.
Voice dialling and GPS may not be supported by your device. SMS will be.
In terms of money, my friend was paying £20 payg to O2 on an ordinary mobile. We located a violet 8520 on Orange UK with 500mb data allowance for £9.85 per month. So who's saving money?
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Desktop motherboards with Killer Network: Does it work while using wif-fi?

So as the title asks, with the mobos offering Killer E2205 or any of the recent versions. Do they work with wireless connections?

What do you man exactly? Using the Killer ethernet while running a Wi-Fi connection at the same time? If so, yes that works. If you want to know if the Wireless is also Killer then no, it is not. Only ethernet is a Killer device on MSI desktop mainboards.

Can bluetooth work while using lightning output?

Similar Messages

Maybe you are looking for