Can BO 5.1.8 and BOXI R2 be installed on the same server?

Hi guys,
Does anyone know if BO 5.1.6 and BOXI R2 can be installed on the same server, provided that the hardware is sized to cope with both environments?

Fernando,
Business Objects does not recommend that two different versions of our software be installed on the same server.
Thanks,

Similar Messages

Can BO XI and CE 10 be installed on the same server?

We are preparing to upgrade our existing CE 10 to BO XI; however, we were unable to obtain a test server and will need to install it on the same server that CE 10 resides on (our development server). I heard that both versions could not reside on the same server and I need this confirmed by a SME. Thank you. ~emoreno

Tim,
I'm not sure that my question was answered. I just need to know whether CE10 and BO XI can be installed on the same server? I have a development server (not a VM) with CE 10 and another customer wants to install BO XI on the same server. I heard through other sources that BO XI and CE 10 cannot reside on the same server. I need to know if this statement is accurate? If BO XI cannot reside on the same server as CE 10, then our contracted vendor will have to provide t this customer with a different server. I need this information confirmed in order to notify my management.
Thanks...EMoreno

Can R12.1.3 and R11.5.10 be installed on the same server?

Hello there,
We are currently running Oracle eBiz R11.5.10, and would like to install the latest version R12.1.3 for testing purposes.
Can R12.1.3 be installed on the same server (for both database and application tiers) as for R11.5.10? Any pitfalls that we need to be aware of if we do this?
Thanks for the advice.
Cheers!

Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
Please don't consider this plan for production instances!
Thanks,
Hussein

Can Elements 4 and Elements 10 be installed on the same PC?

can elements 4 and elements 10 be installed on the same PC?
Message title was edited by: Brett N

lexie35 wrote:
Thank you.
Question: The PC I have runs XP and there is only 502 KB of RAM. E 4 runs OK but the E 10 says at least 1 GB of RAM. Should I be concerned about lack of RAM?
David
I very much doubt you can use PSE10 with 502 kB of RAM.

Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer?

Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer? I like the "fill light" feature in 3 and use it a lot. I would have not gotten 5 except that the images from my new Canon 5D Mk III are not re4cognized on 3. I have 5 on a laptop and 3 on my desktop but would like to have both on my desktop .

Yes you can do this, but you can also get rid of Lightroom 3 and use the "Fill Light" command in Lightroom 5. You need to set the Process Version to 2010 (default is 2012 in Lightroom 5). Use the menu command Settings > Process > 2010
But honestly, you would be wise to stop using "Fill Light", as the new sliders in Lightroom 5 produce superior image quality than anything you can come up with using "Fill Light". Yes, the new sliders take a little time to get used to, but your patience and effort learning the new sliders will be rewarded. You can find some tutorials and videos on using Process Version 2012 on that Internet thing.

Can FCP 7 and FCP X be installed on the same volume?

can FCP 7 and FCP X be installed on the same volume?

Yes. When you download FCPX it moves the older suite of applications into a folder call Final Cut Studio.

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

Can we have BusinessObjects 4.0 and 4.1 both installed on the same machine

Can we have BusinessObjects 4.0 and 4.1 (tool Clients) both installed on the same machine? Why? Why not?

4.0 and 4.1 are incremental upgrades hence both on the same machine are not possible.
Though u can use 4.1 client tools to login to both 4.1 and 4.0 servers.
3.1 and 4.0/4.1 together is very much possible on the other hand.

Can Veristand 2009 and Veristand 2010 be installed on the same machine?

I have VS2009 running on my machine. I would like to install VS2010 as an eval to start porting an implementation over to VS2010 before I pull the plug on VS2009. Can these bothe be installed and functional side-by-side on the same machine? Are there any caveats to bouncing back and forth between the two? I already have the prereqs listed on the VS2010 eval page (NI-DAQmx 9.1.5, NI-RIO 3.5 and NI-XNET 1.1).
Solved!
Go to Solution.

Hi,
I have VS2009 and VS2010 installed in my Windows XP and I can work with them without any problem.
I also tried to port my LV2009 programs to LV2010 but I got problems with VS2009 Off-line API VIs because LV2010 can not convert them. According to the error message, NI delivered the API VIs protected (without diagram).
I believe that you could not have VS2009 and 2010 in the same RT target.
Cheers.
Cláudio H.
CHCastro

Can I use both ePrint and AirPrint on an HP4630 at the same time

I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
I appreciate your help.
This question was solved.
View Solution.

Hello Chesher5,
Welcome to the HP Support Forums!
Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
If you have any problems setting up or using either, please let me know and I'll do my best to assist.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

BI and ECC 6.0 installation in the same server

Hello SAP Experts,
I am given a task of installing BI 7.0 and ECC 6.0 in the same server. Can someone suggest me of what are all the Do's and Don'ts in this scenario and what is the hardware requirements.
Thanks & Regards
Vanitha

Hi,
For installing BI, you have to install Netweaver.
You already have ECC 6.0 in the System.
As a part of BI system, you will be extracting data from ECC Ssytem and loading in BW System.
Hence if your requireement is like data is loaed in the the BW System every one hour, it will slow down the ECC System.
In future you may need to do some OS patch update, database patch update which is not required in ECC, but it will effect both systems
I have not seen any scenario where OLTP and OLAP System are in the same box
But if you are just doing for learning purpose and you are doing it in your sand box , that should be fine

Can different cluster of SAP Business One installed on the same Server

Hi!
Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
Thanks,
Jo Borlagdan

No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
Sorry,
Frank
Message was edited by: Frank Moebius
BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

Is it possible to have Indesign CS4 and CS5.5 both installed on the same Mac? 10.6.8

We have a bunch of recent Intel macs at our corporation. Currently they should all have 10.6.8. They were all imaged from a base image that has Adobe CS4 embedded in it.
We are now using a packaging software part of the JAMF Casper suite and AAMIE to push CS5.5 to the end users.
The problem is that we want to keep CS4 on the end user's computers in case of issues. That way the end users can try Indesign 5.5 and see if it does everything they need to do and still have Indesign for backwards compatiblity.
So we created a CS5.5 install package using the AAMIE tool which works fine. We then use Casper to spam the package out to a Mac.
The issue that arises is that a few Plugin errors occur during the lauch of Indesign CS5.5 such as:
Adobe inDesign does not recognize InCopy Bridge UI.InDesignPlugin as a valid plug-in.
Adobe InDesign does not recognize InCopyExport.InDesignPlugin as a valid plug-in.
Adobe InDesign does not recognize InCopyExportUI.InDesignPlugin as a valid plug-in.
Adobe InDesign does not recognize InCopyImport.InDesignPlugin as a valid plug-in.
There was one more plugin error that occured before the first one but I forgot to write it down.
If we click okay to them, the application launches okay but when you quit and relaunch it, you still get one of the errors.
Is this because both applications are installed at the same time?
Is it offically okay as per Adobe to have Indesign CS4 and CS5.5 installed on the same Macintosh?
What else should we be considering what to do?

Well currently, I'm just testing this issue. I just installed the trial version of Adobe CS4 suite on my mac and then deployed the CS5.5 package on top off it The resulting errors that I listed above are the same ones that occur when the end user has a licensed volume license install of CS4 and CS5.5.
So I'm still back to square 1 where when I deploy cs5.5 on an end user's mac, they get those plugin errors when they launch Indesign CS5.5.
I am not sure about the licensing restrictions, I asked my Director and he is going to check with our VAR.

Create dev and test instances of Apex on the same server and database

I have a dev and prod instances of Apex on different servers. I want a test instance on the same server as the dev instance.
I am using workspace export/import so all instance workspaces have the same workspace id. The application ID is the same on each instance, in the same workspace. This allows pages to be exported/imported in the differenct instances.
My question is (I am sure it is obvious) can I have more than one instances of Apex on the same database (dev and test) and have each instance have identical Workspace IDs, etc.
Sam

Hi Sam,
But you can have more than one database on the same server.
What we do is create a separate database for each APEX versions we are supporting (we still have a customer using APEX 2.0).
All the databases are accessed with the same APACHE config. All you have to do is change the DAD and have a separate dad for each database (i.e. each APEX versions).
ex : /pls/apex_dev /pls/apex_test
This way , I can run different APEX versions on the same server.
Francis.
http://insum-apex.blogspot.com/

How can I have C++ 4.2 and C++ 5.8 installed on the same box?

I am involved in porting C++4.2 code to C++ 5.6 and I would like to know if I could have both compilers sitting side by side on the same machine.
While using one compiler against the other, do I have to set any environment variables to tell the compiler which set of include files it needs to use? Or are these configured during installation? (I have used the compiler for a long time but I have never thought about how the installation works)

You should not a problem with this as long as you install each version on different uniqe directory. But please make sure the OS platform is supported by both versions. There are an issue with multiple releases on the same system with Solaris 10, but I don't think you use Solaris 10 because C++ 4.2 is not supported on Solaris 10.
Yes, you need to set environment variables to tell the compiler which set of include files, binaris or libraries it needs to use. It is not configured during installation.
-Ngoc

Can BO 5.1.8 and BOXI R2 be installed on the same server?

Similar Messages

Maybe you are looking for