Can BO XI and CE 10 be installed on the same server?

We are preparing to upgrade our existing CE 10 to BO XI; however, we were unable to obtain a test server and will need to install it on the same server that CE 10 resides on (our development server).  I heard that both versions could not reside on the same server and I need this confirmed by a SME.  Thank you.  ~emoreno

Tim,
I'm not sure that my question was answered.  I just need to know whether CE10 and BO XI can be installed on the same server?  I have a development server (not a VM) with CE 10 and another customer wants to install BO XI on the same server.  I heard through other sources that BO XI and CE 10 cannot reside on the same server.  I need to know if this statement is accurate?  If BO XI cannot reside on the same server as CE 10, then our contracted vendor will have to provide t this customer with a different server.  I need this information confirmed in order to notify my management.
Thanks...EMoreno

Similar Messages

  • Can Elements 4 and Elements 10 be installed on the same PC?

    can elements 4 and elements 10 be installed on the same PC?
    Message title was edited by: Brett N

    lexie35 wrote:
    Thank you.
    Question:  The PC I have runs XP and there is only 502 KB of RAM.  E 4 runs OK but the E 10 says at least 1 GB of RAM.  Should I be concerned about lack of RAM?
    David
    I very much doubt you can use PSE10 with 502 kB of RAM.

  • Can FCP 7 and FCP X be installed on the same volume?

    can FCP 7 and FCP X be installed on the same volume?

    Yes. When you download FCPX it moves the older suite of applications into a folder call Final Cut Studio.

  • Can BO 5.1.8 and BOXI R2 be installed on the same server?

    Hi guys,
    Does anyone know if BO 5.1.6 and BOXI R2 can be installed on the same server, provided that the hardware is sized to cope with both environments?

    Fernando,
    Business Objects does not recommend that two different versions of our software be installed on the same server.
    Thanks,

  • Can Veristand 2009 and Veristand 2010 be installed on the same machine?

    I have VS2009 running on my machine. I would like to install VS2010 as an eval to start porting an implementation over to VS2010 before I pull the plug on VS2009. Can these bothe be installed and functional side-by-side on the same machine? Are there any caveats to bouncing back and forth between the two? I already have the prereqs listed on the VS2010 eval page (NI-DAQmx 9.1.5, NI-RIO 3.5 and NI-XNET 1.1).
    Solved!
    Go to Solution.

    Hi,
    I have VS2009 and VS2010 installed in my Windows XP and I can work with them without any problem.
    I also tried to port my LV2009 programs to LV2010 but I got problems with VS2009 Off-line API VIs because LV2010 can not convert them. According to the error message, NI delivered the API VIs protected (without diagram).
    I believe that you could not have VS2009 and 2010 in the same RT target.
    Cheers.
    Cláudio H.
    CHCastro

  • Can different cluster  of SAP Business One installed on the same Server

    Hi!
       Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
    Thanks,
    Jo Borlagdan

    No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
    You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
    The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
    Sorry,
    Frank
    Message was edited by: Frank Moebius
    BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

  • Can iTunes 11 and iTunes 10 be installed on the same hard drive and OS?

    I am going to be upgrading from Mountain Lion to Mavericks.  I want to have both iTunes 11 and iTunes 10 on the same Mavericks hard drive.  I will use 11 to sync my iphone 5s and 10 to manage my library (11 drives me nuts). 
    Will iTunes 10 install and co-exist on a mavericks hard drive that already has 11 installed?
    If not I figure I'll have to partition the drive and install iTunes 10 on the second partition, but I'd rather not have to do that. 

    Also if I try to import my iTunes 11 library file into iTunes 10 will I get an error?
    Yes.
    So partitioning looks to be the best option then.
    So you are only going use the iTunes 11 partition to sync the iPhone? Nothing more?
    Any changes you make while managing the library with iTunes 10 will not be seen on the iTunes 11 partition (and vice-versa).
    Any changes you make will not be seen on the iPhone.
    Gonna have to get used to iTunes 11.
    It works very much like iTunes 10 after you turn on the sidebar.

  • Can Coldfusion 9 and PHP 5.1 coexist on the same server?

    I
    found a analytics tool that I want to use for my companies intranet, and it requires PHP 5.1 to be installed on the server. This server will also have CF 9 on it as well. Will PHP 5.1 interfere with the web site and applications on the server written in CF 9?

    Yes, just be careful if security is a concern. Now you double the chance of security vulnerabilities.

  • Can FrameMaker 7 and FrameMaker 12 be installed on the same computer?

    My techcomm group hasn't updated Frame in a while, obviously. I'm the "guinea pig" to test how our docs work with the newest version of Frame. However, I still need to be able to work in and save existing documents for other users -- coworkers who still have Frame 7 -- to work in them.
    So... can I?

    > ... same computer ...
    What OS (obviously Windows, but XP, Vista, 7 or 8?).
    If 7 Ultimate, Pro or Enterprise, install the FM7 in XP Mode (which is a major download) to provide maximum isolation of the two FMs.
    And before you do it, let us know, because there are some considerations with XP mode on Win7.

  • Can R12.1.3 and R11.5.10 be installed on the same server?

    Hello there,
    We are currently running Oracle eBiz R11.5.10, and would like to install the latest version R12.1.3 for testing purposes.
    Can R12.1.3 be installed on the same server (for both database and application tiers) as for R11.5.10? Any pitfalls that we need to be aware of if we do this?
    Thanks for the advice.
    Cheers!

    Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
    Please don't consider this plan for production instances!
    Thanks,
    Hussein

  • Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer?

    Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer? I like the "fill light" feature in 3 and use it a lot. I would have not gotten 5 except that the images from my new Canon 5D Mk III are not re4cognized on 3. I have 5 on a laptop and 3 on my desktop but would like to have both on my desktop .

    Yes you can do this, but you can also get rid of Lightroom 3 and use the "Fill Light" command in Lightroom 5. You need to set the Process Version to 2010 (default is 2012 in Lightroom 5). Use the menu command  Settings > Process > 2010
    But honestly, you would be wise to stop using "Fill Light", as the new sliders in Lightroom 5 produce superior image quality than anything you can come up with using "Fill Light". Yes, the new sliders take a little time to get used to, but your patience and effort learning the new sliders will be rewarded. You can find some tutorials and videos on using Process Version 2012 on that Internet thing.

  • Can we have BusinessObjects 4.0 and 4.1 both installed on the same machine

    Can we have BusinessObjects 4.0 and 4.1 (tool Clients) both installed on the same machine? Why? Why not?

    4.0 and 4.1 are incremental upgrades hence both on the same machine are not possible.
    Though u can use 4.1 client tools to login to both 4.1 and 4.0 servers.
    3.1 and 4.0/4.1 together is very much possible on the other hand.

  • Is it possible to have Indesign CS4 and CS5.5 both installed on the same Mac? 10.6.8

    We have a bunch of recent Intel macs at our corporation.  Currently they should all have 10.6.8.  They were all imaged from a base image that has Adobe CS4 embedded in it. 
    We are now using a packaging software part of the JAMF Casper suite and AAMIE to push CS5.5 to the end users.
    The problem is that we want to keep CS4 on the end user's computers in case of issues.  That way the end users can try Indesign 5.5 and see if it does everything they need to do and still have Indesign for backwards compatiblity.
    So we created a CS5.5 install package using the AAMIE tool which works fine.  We then use Casper to spam the package out to a Mac.
    The issue that arises is that a few Plugin errors occur during the lauch of Indesign CS5.5 such as:
    Adobe inDesign does not recognize InCopy Bridge UI.InDesignPlugin as a valid plug-in.
    Adobe InDesign does not recognize InCopyExport.InDesignPlugin as a valid plug-in.
    Adobe InDesign does not recognize InCopyExportUI.InDesignPlugin as a valid plug-in.
    Adobe InDesign does not recognize InCopyImport.InDesignPlugin as a valid plug-in.
    There was one more plugin error that occured before the first one but I forgot to write it down.
    If we click okay to them, the application launches okay but when you quit and relaunch it, you still get one of the errors.
    Is this because both applications are installed at the same time?
    Is it offically okay as per Adobe to have Indesign CS4 and CS5.5 installed on the same Macintosh?
    What else should we be considering what to do?

    Well currently, I'm just testing this issue.  I just installed the trial version of  Adobe CS4 suite on my mac and then deployed the CS5.5 package on top off it  The resulting errors that I listed above are the same ones that occur when the end user has a licensed volume license install of CS4 and CS5.5.
    So I'm still back to square 1 where when I deploy cs5.5 on an  end user's mac, they get those plugin errors when they launch Indesign CS5.5.  
    I am not sure about the licensing restrictions, I asked my Director and he is going to check with our VAR.

  • Can SharePoint Apps and SharePoint 2013 workflow run on the same servers?

    As the SharePoint 2013 workflow manager can run on non-sharePoint servers. Can I also use those server to host SharePoint apps in the Provider host model?
    Or should I keep them separate?
    This is a medium size deployment, 2 WFEs, 2 Apps, 1 Clustered DB.   I would be adding 2 additional servers for hosting workflow manager, and SharePoint apps. 
    One other option I can think of would be to host the Workflow manager on the SharePoint Apps servers.  And then host the SharePoint Apps on the 2 separate servers.
    Any guidance or gatchas would be great the hear about.
    Thanks!
    Joshua Fuente

    Yes, you should be able to run SharePoint Provider hosted apps using the Workflow Server as the provider.  There is nothing in workflow manager that prevents running web sites on the same server.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • BI and ECC 6.0 installation in the same server

    Hello SAP Experts,
    I am given a task of installing BI 7.0 and ECC 6.0 in the same server. Can someone suggest me of what are all the Do's and Don'ts in this scenario and what is the hardware requirements.
    Thanks & Regards
    Vanitha

    Hi,
    For installing BI,  you have to install Netweaver.
    You already have ECC 6.0 in the System.
    As a part of BI system, you will be extracting data from ECC Ssytem and loading in BW System.
    Hence if your requireement is like data is loaed in the the BW System every one hour, it will slow down the ECC  System.
    In future you  may need to do some OS patch update, database patch update which is not required in ECC, but it will effect both systems
    I have not seen any scenario where OLTP and OLAP System are in the same box
    But if you are just doing for learning purpose and you are doing it in your sand box , that should be fine

Maybe you are looking for

  • Java.lang.NoClassDefFound Error while invoking dbua(9.2.0.8)on Sun Solaris.

    Hi Friends, I had installed Oracle 9.2.0.1(software alone) on Sun solaris box and then i installed the patchset 9.2.0.8 on the same Oracle 9i Home.It's installed. But when i try to run dbca to cretae a database from $ORACLE_HOME/bin it throws the err

  • [SOLVED] DNS stops working

    Hi! I'm running arch64 on my Thinkpad x220 and have a strange problem here. Sometimes DNS just stops working, to rule out a bad Server I tried it with the one of Google: dig @8.8.8.8 archlinux.puzzle.ch On Archlinux dig tells me that no servers could

  • A short and fundamental question: Java3D in headless mode

    To begin I would like to introduce myself as a complete Java3D newbie. What I would like to accomplish is to produce an application which, in headless mode, will read in data and generate 3d images as files, without ever making any GUI components to

  • To copy table from one database to another

    hai, I will be really pleased if someone can me tell me that how can i copy table from one database to another. I am having two databases. Gursimran

  • Java.sql.Timestamp( long time ) bug?

    It appears to wipe milliseconds clean. If I pass in the current time such as: Timestamp t = new Timestamp( 1012427790890 ); and then do a t.getTime(); it returns the correct time but with no millis: 1012427790000