Can Boot an IBook G4

The system stops at the Apple Screen with a moving PinWheel.
I've tried:
Resetting PMU, Can't Boot (ctrl C) using OS X Disk, can't boot in safe mode, etc......
Was able to run Hardware Test and recieved
2MEM/104/4: Dimmo/Built-In. Since I assume this is a bad RAM issue, and the only Ram is on the system board probably solder in, I probably can't fix it.
Any ideas on how to proceed. It's just over 1 year old and I believe out of warrantee.
Is there a way I can somehow get data off the harddrive for recovery?
Thanks for your help!!!
Dan

Daniel
If you can get you computer to cooperate try this
Using firewire connect your computer to another mac and on your ibook press t when you start up. You should then see a firewire symbol on your ibook screen. On the other mac you should see your HD on the desktop. You can repair your disk on the other mac and/or retrieve the necessary files. (Requires 2 computers with OSX)
Don't have another mac? Make new friend.
3

Similar Messages

  • Can't get ibook to boot from external harddrive when hitting option key

    Hello,
    After owning a Pismo Powerbook that had it's hardrive replaced --twice--, i'm all about backing my shtuff up for my ibook.
    I picked up a Lacie d2 external harddrive today, and used Disk Utility's Restore function to copy everything from the ibook to the drive. I can boot off the Lacie without a problem when I select it as the startup disk from sys preferences.
    But I can't get it to boot from the Lacie when I depress the Option key while rebooting or starting.
    any suggestions?
    ibook g4 933   Mac OS X (10.4.6)  

    Let's be sure  you are doing it correctly:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears.  Select the desired boot drive (you will have to wait about 20 seconds before you can make the selection) then click on the large right arrow button.  If this is what you are doing and it does not work, then you may need to re-prep the external drive and re-clone.
    1.  Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    After the above re-clone as follows:
    1. Open Disk Utility from the Utilities folder. 
    2. Select the startup volume from the left side list. 
    3. Click on the Restore tab in the DU main window. 
    4. Drag the startup volume to the Source entry field. 
    5. Select the backup volume from the leftside list and drag it to the Destination entry field.
    6. Check the box to Erase Destination.  Skip this step if you've already formatted the drive.
    7. Double-check you got it right, then click on the Restore button. 

  • How can i boot my iBook by CD ?

    Hi everyone !
    I need your help again.
    I bought a MAC OSX install CD (Tiger version). I've formatted my iBook alreary. But now, i don't know how to boot my iBook by the CD.
    Please help me, everyone !
    Thanks alot.
    Phuc Nguyen Chinh.
    G3 model 2001   Mac OS X (10.4.1)  

    Are you sure you have a Tiger CD? Tiger usually comes on DVD.
    To start up from the Tiger Install disc, put it in the tray. Restart the computer, and as the startup chime is ending, hold down the c key until you see the Apple logo AND the progress indicator that looks like a spinning gear. Then you can let up on the c key, and the iBook will start up from the Install disc.
    How did you manage to format the iBook without booting from the Install disc?

  • Laptop that can boot OS9.

    A couple of years ago, I posted here for advice regarding the purchase of a 'used' desktop machine and ended up buying a Quicksilver with a video fault which I fixed and upgraded / updated and has now been sold on to a friend. I've also sold my beloved Cube. I have an iBook G4 800Mhz but it doesn't boot OS9.
    I'm now looking for an iBook (or possibly PowerBook) which will boot OS9 and is capable of running at least Panther and ideally Tiger (although I only have Tiger on DVD) - I'm not worried about Leopard.
    Firewire would also be good since I backup to a Firewire disk. I already have spare Airport and Extreme cards.
    I have retail OS9.1 (together with the updates to 9.2.2) so I'd need to be able to boot this should the machine not have restore disks.
    So to the question: What is the latest model laptop that can boot OS9 and Panther/Tiger? Looking for the best spec. or something that can be upgraded a bit (memory, disk - wouldn't bother with processor 'upgrades')
    Look forward to reading your advice...
    Macbook Pro 15", iBook G4 12", iPod3G 40Gb   Mac OS X (10.4.9)  

    Hi, David -
    The last iBook that can boot to both OS 9 and Tiger is the iBook (Early 2003) model. This model, however, requires the original disk set that came with it in order to install OS 9.
    The last iBook that can use a retail OS 9 Install CD (9.2.1) and run Tiger is the iBook (Late 2001) model.
    The last PowerBook that can boot to OS 9 and Tiger is the PowerBook G4 1GHz-867MHz model. This model also requires its original disk set in order to install OS 9.
    The last PowerBook that can use a retail OS 9 Install CD (9.2.1) and use Tiger is the PowerBook G4 (DVI) model.

  • "Login Window Starting" haults boot on iBook G4

    I'm trying to fix my friends iBook G4 that will no longer boot properly. The boot process hangs at "Login Window Starting" and I have tried several things including running fsck from single user mode (which found various errors that were fixed), resetting permissions, removing plist files and connecting it to a wired network - without any luck.
    I'm pretty sure the iBook G4 is running 10.3.x but she (my friend) doesn't know for sure. Has anyone run into this before? Is there anything else I can try without reloading the iBook? Is it possible to access the HD on this Mac from another Mac via firewire?

    Hi Eric,
    Welcome to the Discussions.
    You can access the iBook's hard drive with Firewire Target Mode. I would try repairing the drive with Disk utility and if it still won't boot, download and apply the 10.3.9 combined update again using Firewire Target Mode. It's available on the Downloads page. If that fails, do an Archive and Install.
    John

  • I can't ring ibooks in my App Store for my mac-what do i do, how do i download it in my mac?

    i can't ring ibooks in my App Store for my mac…what do i do, how do i download it in my mac?

    Are you running Mavericks 10.9?  That is required for iBooks.

  • After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

    After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
    EtreCheck version: 1.9.15 (52)
    Report generated August 30, 2014 at 6:56:41 PM EDT
    Hardware Information: ?
        iMac (21.5-inch, Mid 2011) (Verified)
        iMac - model: iMac12,1
        1 2.5 GHz Intel Core i5 CPU: 4 cores
        4 GB RAM
    Video Information: ?
        AMD Radeon HD 6750M - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ?
        OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
    Disk Information: ?
        ST3120026AS disk0 : (120.03 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        CHICONY USB NetVista Full Width Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Gatekeeper: ?
        Anywhere
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [running]    com.arcsoft.eservutil.plist Support
        [running]    com.bjango.istatmenusdaemon.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [running]    com.sophos.autoupdate.plist Support
        [running]    com.sophos.configuration.plist Support
        [running]    com.sophos.intercheck.plist Support
        [running]    com.sophos.notification.plist Support
        [running]    com.sophos.scan.plist Support
        [running]    com.sophos.sxld.plist Support
        [running]    com.sophos.webd.plist Support
    Launch Agents: ?
        [running]    com.arcsoft.esinter.plist Support
        [running]    com.bjango.istatmenusagent.plist Support
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.sophos.uiserver.plist Support
    User Login Items: ?
        Macs Fan Control
        Firefox
    Internet Plug-ins: ?
        FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
        Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 7 Update 67 Check version
        Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        CUDA Preferences  Support
        Fan Control  Support
        Flash Player  Support
        Java  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ?
             1%    WindowServer
             1%    fontd
             0%    firefox
             0%    SystemUIServer
             0%    SophosWebIntelligence
    Top Processes by Memory: ?
        229 MB    firefox
        156 MB    SophosScanD
        152 MB    InterCheck
        131 MB    com.apple.IconServicesAgent
        115 MB    SophosAntiVirus
    Virtual Memory Information: ?
        424 MB    Free RAM
        1.53 GB    Active RAM
        1.37 GB    Inactive RAM
        699 MB    Wired RAM
        1.26 GB    Page-ins
        0 B    Page-outs

    I'd start by getting rid of the following software responsible for these extensions.
    Kernel Extensions: ?
        [loaded]    com.nvidia.CUDA (1.1.0) Support
        [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
        [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
    Startup Items: ?
        CUDA: Path: /System/Library/StartupItems/CUDA
        FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item.  Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Here is a selection:
        1. AppZapper
        2. AppDelete
        3. Automaton
        4. Hazel
        5. AppCleaner
        6. CleanApp
        7. iTrash
        8. Amnesia
        9. Uninstaller
      10. Spring Cleaning
    For more information visit The XLab FAQs and read the FAQ on removing software.
    Be sure to remove your two Login Items. Finally do this:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Black Screen - Get Chime - Can Boot off HDD using another Mac - iMac 24in.

    Hope someone can help me here, as I'm at my wits end.
    I've got two issues, one with my MacBook Pro 17in, 4GB RAM, 160GB 7200rpm (2008) and another with my iMac 24in. 4GB RAM, 500GB 7200rpm (2009).
    Firstly the MBP, left work on Thursday last week, got home, powered up the MBP and got a black screen!!! Tried resetting PRAM, SMC, booting in safe mode, removing and re-installing RAM, removing battery and mains power and leaving off overnight etc etc, yet nothing happens. Benn all over the forums and have not found any solution to get my beloved MBP working on it's own. I can boot off the HDD using another MBP 15in, re-install Snow Leopard and as far as I can tell the HDD is fine, as I have run disk utility and it tells me the HDD is OK.
    I can't figure this out and it's doing my head in, as I use this laptop for business use and just can't afford to go out and buy another Mac. I should point out that this MBP never had any issues when running on Leopard, but ever since I upgraded to Snow Leopard, I have had nothing, but trouble. I did a clean install, in fact I have done it at least twice, even erasing the HDD securely, both at 7pass and 35pass, yet I have had permissions issues regularly and on the odd occasion, I have also had the problem of the HDD not being recognised.
    The iMac is nearly the same, but the screen is working, although the iMac doesn't see the HDD no matter what way I do, again, reset PRAM, SMC, safe boot etc etc. In truth the iMac has been a lot more unreliable, but with the screen working, if I can get any solutions here, then I'll be working to work on that without the need or hassle of working via another.
    I think that the MBP is only just still under warranty, but the iMac definitely is, but I need at least one working for business use, so really only want to let Apple have one at a time to look at/repair etc.
    Ideally, as the HDD is working in the MBP, if I could get a solution to the black screen issue, then I could do without the iMac for whatever time it takes, so if there is anyone out there that can help, I'd be so grateful.
    One last thing, when I bought the iMac 24in., I also bought an iMac 20in., but I never upgraded the 20in. to Snow Leopard and to this day, it has worked flawlessly, without a single issue ever.
    Perhaps, I'm getting paranoid here, but there seems to me to be a link between the ongoing and regularly occurring problems with both Macs ant the upgrade to Snow Leopard. Why also, or is it just pure unadulterated coincidence that both the MBP and the iMac 24in have failed at pretty much the same time??!!!!
    I'm going mental here, so I hope someone out there has a better fix, then me overdosing on Prozac!!
    PS
    I'm not a mac expert, not good with a soldering iron either, but I'm capable of following good instructions.

    Using Snow Leopard forum is probably your best bet.
    I don't care if someone has 20+ yrs, I still like having a good troubleshooting book/manual handy.
    Mac: can't get by without bootable backups, even if you use TimeMachine, clone your system. Save you all this fuss and work.
    Then invest in high quality disk repair and maintenance program.
    Disk Warrior / TechTool Pro 5 / Drive Genius 3 - top 3 probably
    There are always going to be normal items you just ignore with Repair Permissions. Useful to do once in a while but not magic. Same with SMC and the rest. Running disk repair is one of those things that it seems should be done before there is trouble, not after, and a weakness in HFS file system and disk directory.
    Apple Support is a good place to start looking and then hardware category.
    http://www.apple.com/support
    http://www.apple.com/support/imac /macbookpro etc
    Make sure all your software is current, don't install anything you are unsure of or can do without.
    Run Apple Hardware Test off your OEM DVD specific to the Mac.
    Now, have you Googled for this?
    have you looked at reports about 500GB drives used in some Macs that had issues and were offered firmware update for the drive?
    Considered just using another drive connected to iMac?
    You can overheat a hard drive with needlessly running 7 and 35-write pass, besides which the best way to map out bad blocks is not Disk Utility.
    http://www.bing.com/search?q=imacblackscreen
    http://www.bing.com/search?q=AppleiMac+firmwareupdate
    I'd direct your replies to iMac and MacBook Pro as well as to Using OS X Snow Leopard areas.

  • Black Screen on MBP, Can hear chime and can boot from HDD via another MBP!

    Hope someone can help me here, as I'm at my wits end.
    I've got two issues, one with my MacBook Pro 17in, 4GB RAM, 160GB 7200rpm (2008) and another with my iMac 24in. 4GB RAM, 500GB 7200rpm (2009).
    Firstly the MBP, left work on Thursday last week, got home, powered up the MBP and got a black screen!!! Tried resetting PRAM, SMC, booting in safe mode, removing and re-installing RAM, removing battery and mains power and leaving off overnight etc etc, yet nothing happens. Benn all over the forums and have not found any solution to get my beloved MBP working on it's own. I can boot off the HDD using another MBP 15in, re-install Snow Leopard and as far as I can tell the HDD is fine, as I have run disk utility and it tells me the HDD is OK.
    I can't figure this out and it's doing my head in, as I use this laptop for business use and just can't afford to go out and buy another Mac. I should point out that this MBP never had any issues when running on Leopard, but ever since I upgraded to Snow Leopard, I have had nothing, but trouble. I did a clean install, in fact I have done it at least twice, even erasing the HDD securely, both at 7pass and 35pass, yet I have had permissions issues regularly and on the odd occasion, I have also had the problem of the HDD not being recognised.
    The iMac is nearly the same, but the screen is working, although the iMac doesn't see the HDD no matter what way I do, again, reset PRAM, SMC, safe boot etc etc. In truth the iMac has been a lot more unreliable, but with the screen working, if I can get any solutions here, then I'll be working to work on that without the need or hassle of working via another.
    I think that the MBP is only just still under warranty, but the iMac definitely is, but I need at least one working for business use, so really only want to let Apple have one at a time to look at/repair etc.
    Ideally, as the HDD is working in the MBP, if I could get a solution to the black screen issue, then I could do without the iMac for whatever time it takes, so if there is anyone out there that can help, I'd be so grateful.
    One last thing, when I bought the iMac 24in., I also bought an iMac 20in., but I never upgraded the 20in. to Snow Leopard and to this day, it has worked flawlessly, without a single issue ever.
    Perhaps, I'm getting paranoid here, but there seems to me to be a link between the ongoing and regularly occurring problems with both Macs ant the upgrade to Snow Leopard. Why also, or is it just pure unadulterated coincidence that both the MBP and the iMac 24in have failed at pretty much the same time??!!!!
    I'm going mental here, so I hope someone out there has a better fix, then me overdosing on Prozac!!
    PS
    I'm not a mac expert, not good with a soldering iron either, but I'm capable of following good instructions.

    Concerning your imac, have you tried installing the OS on an external drive and running the iMac from that? My friend in Texas had her iMac's hard drive vanish, so we installed the OS on an external FireWire drive I happened to have and then restored her data from a recent backup. So far I haven't had time to install the drive in her iMac, so it's been running off of the external for a long time now. Perhaps you could do something like that so you could at least have the use of the iMac while your MBP is in the shop. Once you get the MBP back, you can send in the iMac.
    Be sure to report both of these to Apple and get case numbers so that you can document that the issues started while you were still under warranty--especially for the MBP that's about to go out of warranty.
    Good luck!

  • How can I delete iBooks from iCloud?

    I downloaded some free iBooks.  After I read them, I clicked "delete" and a dialog box said they are deleted from my computer but remain in iCloud and can be downloaded later.  But I want to delete them from iCloud as well as from my computer.  How can I delete iBooks from iCloud?

    You cannot delete them form icloud.
    Icloud is a service that allows redownloading of past purchases.  That is the point.

  • Can you include ibooks in RSS to PSM?

    Hello all
    We've tried to add an iBook to one of our Oxford iTunes U RSS feeds and have been surprised to discover it's not working for us in the same way that .epub files do. We are getting the unsupported resource extension error (text below). Could anyone tell us whether we: a)Should be able to publish ibooks in the feed? & b) Is there a mistake in how we are presenting the resource in the RSS?
    Many thanks
    Carl.
    Error text:
    iTunes U could not update the content because iTunes U encountered an unsupported resource extension in the URL (http://media.podcasts.ox.ac.uk/internet/geographies/geographies.ibooks?CAMEFROM= itunesu) specified in feed (http://rss.oucs.ox.ac.uk/oxitems/generatersstwo2.php?channel_name=internet/geogr aphies-video&destination=itunesu). Until the issue is resolved, iTunes U continues to display the last downloadable version of the content. Verify that the feed resources contain only approved content types (mpeg audio, mp4 video, QuickTime video, PDF, mp4 audio) with appropriate file extensions (mp3, mp4, mov, pdf, m4a), and then try again.
    Carl Marshall
    Podcasting Team - Technical
    Learning Technologies Group Services

    Hi Erik,
    This doesn't make sense to us particularly. Course Manager provides a way of wrapping any resource on the iTunes Store (i.e. including iTunes U content), and that "wrapper" can then be published in the iTunes U section via the Public Site Manager webapp. We understand that Course Manager can act as a repository for ibooks, or they can be published to the iBookstore - but this doesn't explain why we can't have ibooks in our regular RSS feeds which already contain a mix of document types (including epub, even though that's not listed above as a valid option). We know the iPad is happy to open the ibook from visiting the RSS feed directly, so the only limitation seems to be on the PSM parsing....
    Which brings me back to the two questions asked: Should we be able to do this, and have we made a technical error in how we've done this?
    Thanks
    Carl

  • Can you sync ibooks from an iMac to MacBook Air with the same apple id?

    Can you sync ibooks from an iMac to a macbook air with the same apple id?  Settings set to allow this.

    If the ibooks were purchased from Apple, and download new purchases is selected in iBooks preferences, then yes.

  • How can I get iBooks 3.1.1 on my iPhone 4S?

    I am on iOS 6.1 but only have iBooks 3.0.2. How can I get iBooks 3.1.1 so I can use it?  Don't tell me I need an iPhone 5 because I will scream!

    erin362436 wrote:
    ...I only got 64 pages of a 224 page book.  What do I do?
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Win7 can't boot in USB hard drive blue screen 7b error,but can boot when use PD8

    Install Win7 64bit in a USB hard drive through some tools,when start windows the microsoft logo appear,get blue screen.
    ***stop:0x0000007B(0x80786B58,0xC0000034,0x00000000,0x00000000)
    problem has been detected and windows has been shut down to prevent  damage to your computer.If  this is the first you've seen this stop  error screen restart your computer .If this screen appears again.follow these steps:Check for viruses on  your computer.Remove any newly hard drives or hard drive  controllers.Check your hard drive to make sure it is  properly.Configured and terminated.Run DCHKDSK/F to check for hard  drive corrption,and then restart your computer.
    Technical:
    ***stop:0x0000007B(0x80786B58,0xC0000034,0x00000000,0x00000000)
    But when use Parallels Desktop 8 My boot camp ,the win7 can boot normally.
    Any solution?
    Thank you.

    Hi,
    If this issue is related with firmare, then it's recommend to contact the vender\manufacture, if you got any update of this issue, we'd be appreciate that you could share your experience with us.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.

    Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.
    This is a problem that suddenly appeared.

    Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Maybe you are looking for

  • Getting number of days between 2 dates

    Hello All, I require the number of days between 2 dates. The number of days is between low date : PR Date (not an input variable) and the high date. I have created an customer exit variable to get sy-datum in made it as formula variable. I have also

  • Terrible Video Playback in Photoshop CS6

    I'm working on a computer that is more than fast enough to play 1080P video from DSLR. Specs are Intel Quad Core Q9550 @ 2.83Ghz, 6 Gigs of DDR2 800 RAM, Quadro 2000 GPU, and RAID 0 7200rpm scratch drives. Photoshop has 4 gigs of RAM dedicated to it

  • HR Analytics Dashboard Description documents

    Hi All, How can I get HR Analytics Dashboard Description documents or any presentation about it? Thanks

  • Can't load usb printer driver

    can't load usb printer driver

  • QAAWS  gives invalid prompt

    Hello, I need to compute a % figure on the calculation on 2 columns which I want to extract form the universe. eg) (A/B)*100.   If I do this calculation in the universe object then for some reason the values seem too high and off, however I can perfo