Can BT sport run through the power adapter connect...

I am running BT vision through powerline adapters but have ordered BT sport. Will it work?
I am currently getting ESPN.
Clicking on BT sport etc gets a message saying I am not in and Infinity area... but I have it? Do i need the Cat5 link to be installed?

The broadband channels will work through powerline adapters, however it's not recommended and not supported. If you do this you could experience poor performance when watching broadband-based channels.

Similar Messages

Just purchased an 11" Mac Book Air, and I'm using it as a desktop. Is it ok to lea the power adapter connected all the time?

I'm using my macbook air as a desktop unit, with an auxiliary flat panel display, as well as an external storage drive and a CD/dvd drive. Is it safe to leave the power adapter connected to the computer all the time? Will the battery life get affected or shortened by being fully charged all the time?

Apple recommends that for best battery life, you allow the battery to discharge occasionally.
Here's a good link:
http://www.apple.com/batteries/notebooks.html

Doesn't recognize the power adapter. Have replaced battery and PRAM.

Howdy,
I'm having a devil of a time with my Powerbook. It won't recognize a power adapter.
It won't charge my battery.
Won't run when plugged into the power adapter.
The only way it works is for me to charge my battery in my girlfriend's Powerbook and then sprint through any work I try to get done.
I've replaced the PRAM with twice. (one i bought and the other I took from my girlfriend's which I 100% know to work) It didn't make a difference.
Below is the info from the system profiler "System Power Settings"
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3734
Remaining Capacity (mAh): 3374
Amperage (mA): -1231
Voltage (mV): 11770
Cycle Count: 235
AC Charger Information:
AC Charger (Watts): 0
Connected: No
Charging: No
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
If anyone has any suggestions I'll love them forever.
My sanity is going on this.

Welcome to the Apple discussions.
There's only 4 components in the charging circuit: power adapter, DC-in card, battery, and logic board. Do you know for a fact that your power adapter is working? If yes, then not running on the power adapter says either the DC-in card is bad (the card that has the jacks on the left side of the computer) or it's a logic board issue. Is the female jack where you plug the power adapter in visibly damaged, loose, or the case around the socket damaged? If the socket is wiggly loose, likely a new DC-in card is in order. Does the power adapter light up at all when you plug it in?
We had a similar, but not exact, situation recently on one of our Powerbooks, and ended up taking it to the Apple store, where they sent it to the Apple depot for repair. They replaced the logic board and put a new battery in. The Depot service returns the machine with anything needing repair, repaired. If everything is in good physical order, ie the case isn't damaged, it costs around $325, which is less than getting a new logic board put in at the store. If the case is damaged, a trip to the Apple depot costs more. A new DC-in card card + installation by Apple runs around $130, give or take. Used DC-in cards run around $75-$95 if you want to install it yourself.

Macbook Pro won't wake up even with power adapter connected

If I use my Macbook to the point where the battery completely die, it will not power up again even with the power adapter connected. It takes about 15-20 minutes of charging before it will wake up again. It seems as though it can't draw power directly from the adaptor, but must wait until the battery is sufficiently charged, and draw power from the battery. I can't imagine this is a design decision. Any help?

Part of this time may involve attempting to read a damaged sleep image file, bewlatbrutha.
You should note, too that the batteries in these computers have a built in microprocessor of their own to try to prevent them from being damaged by discharging too deeply. If you discharge to the point where even the battery's own processor has to shut down you may never be able to resurrect your battery without outside help (and sometimes not even then). Almost all Lithium Polymer and Lithium Ion batteries (regardless of what they are fitted to) have this sort of protection. The battery has to have a certain minimum charge at all time to keep its own processor running.
Even without reaching this point it is not good for Lithium batteries to be regularly discharged to the point where the computer has to sleep or shut down. You risk severely shortened battery life if you do this regularly.
Cheers
Rod

HT3131 how can i run in clamshell without the power adapter plugged in?

just what the question states..I dont want to have to always connect the power adapter. thanks

thanks this works well with the power adapter pluged into the mac, but I am looking for this exact setup without the need for the power to be supplied to the mac.
in otherwords, run it off the battery only.
I want to think that there is either a preferences setting, or function to be able to do this.
currently it appears that the mac will only run in the configuration with external perpherials with the power supply.

Where can I find a replacement for the power adapter tip?

I need to replace the small adapter that allows the power adapter to be inserted into a socket. Does apple sell this part separately?
The adapter itself works fine. But the tip that gets inserted into the adapter, and then the wall, has started to make sparks. I'm afraid it's going to catch fire, or cause a fire. When plugged into the wall, I hear sparks and I see smoke coming out. If I adjust it's position by slightly withdrawing it from the wall socket, so that there is minimal contact, the sparks stop. But I am a little worried now that I can't leave my MacBook Pro retina plugged in without risk of fire. This started about a month ago after two years of use without any issues.
To be clear, I'm not talking about the adapter itself, but the tip that gets inserted into the adapter, and in turn allows the adapter to be inserted into a socket.
It seems wrong to shell out $80 for a whole new adapter when all I need to replace is the wall adapter.

What about the world travel adapter
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ
The Kit is designed to work with iPod, iPhone, iPad, Apple MagSafe Power Adapters (for MacBook and MacBook Pro), Portable Power Adapters (for iBook and PowerBook), and AirPort Express.

What's the most current OX system can I run on the power Mac g5

What's the most current OX system can I run on the power Mac g5

Hello,
1058 Combo Update, 10.5.8...
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Anything higher requires an IntelMac, no G4s or G5s can run it.

HT1635 where can I get the power adapter for MC207xx/A . It's a 60W "T" connector

where can I get the power adapter for
MC207xx/A . It's a 60W "T" connector

You can get a new third party 60W power adapter on eBay for under $20.
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313
Or for $80 from Apple http://store.apple.com/us/product/MC461LL/A

Can the power adapter be used in China?

Can the power adapter be used in China?

The short answer is, Yes; but you may need some form of adapter to connect the plug to the local style of socket. A quick search on the internet found this http://en.wikipedia.org/wiki/AC_power_plugs_and_sockets

Can I replace my power adapter for free within warranty for the hook which is used to coil the cord on the power adapter is broken.

Can I replace my power adapter for free within warranty for the hook which is used to coil the cord on the power adapter is broken when fall down.

Hello vanexe,
Welcome to the HP Consumer Support Community.
This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
Thank you.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Can get past the "Power adapter plugging into wall" icon

I just got my brothers older 60gb Photo ipod and am trying to get it working on my computer. Did the whole restore thing, but now it is stuck at the Power adapter plugging into wall icon. I didn't have the original wall plug so I got a universal one at Radio Shack. Only the ipod still has the darn icon on it and I can't get past it. Any suggestions>

Lets do a trick. Connect the iPod and the cabel. The USB connector has 2 prongs that stick out a little more than the rest the goal. is to push it in a little so it charges but does not sync. Give It A Try.

4th Gen. ipod. No longer charges from wall socket. Still can charge from computer. Wall power adapter and cord both work fine on other devices. Wall Why?

4th Generation ipod. Used to charge fine from wall socket (cord and USB adapter) and could also charge on the computer. Suddenly stopped charging from the wall. The same cord and adapter still work for my iphone, so there is not problem with either of them. What has changed? Why won't the ipod charge from the wall anymore? Is there anything I can do about it?

Thanks! It didn't actually work with the one I was using to charge the computer either. We had tried the computer cable with the power adapter, and it didn't work to charge the ipod, though it does charge my iphone. Following your idea further, I waited for my husband to get home from a trip and tried one of his extra cables he keeps in his backpack. That cable worked in with the USB power adaptor. I had thought that because the cable I use on my computer charges my iphone through the USB power adapter or the computer, and that it charged the ipod through the computer that it was fully functional. Apparantly not. Thanks again.

Noise on audio output when using the power adapter

I'm a musician and use my mid-2007 MBP 15" in my live rig. When I use the power adapter, I hear a buzz, sometimes accompanied by a slightly louder buzz that cycles on & off about 1x/second. There are a few weird things going on here:
1. The buzz does not happen all the time. That leads me to think it may be noise in the AC line that the adapter is plugged into.
2. The noise is heard when I use both the built-in audio output AND an external USB audio interface.
In any case, when I disconnect the power adapter and run my MBP on battery, the noise goes away completely. I can probably do this on most gigs, but I'm a little nervous since I run a FW drive, an external USB audio interface, and my midi keyboard (powered by USB) so I am putting a little heavier than usual load on the MBP's battery.
As I said, this may be a noisy AC line. Another guess is that it's the PMU inducing noise into the audio circuitry. I'm hoping a simple AC line filter can help me but I thought I would ask here first in case anyone else has dealt with this. TIA for any help!

I had a similar problem and fixed it with a $5 universal travel adapter. Yours might be different but here's my situation. Try it for little cost and see if it works.
I'm also a muso with an iMac running external KRK speakers via USB Mbox2. Previously I had a Macbook Pro and the same audio problem. I've been putting up with a very low volume, high pitch noise until now. I simply plugged the Mac power cord into a universal travel adapter which then goes into the wall. For Aussie users there is an adapter on ebay that will allow a 3 pin Aussie plug to go into female side and has a two pin Aussie male on the other. For US users you can probably get the same although there is a 59c product that will do the trick called a ground lift adapter. Applecare actually agreed this was the best fix and confirmed there would be no problems with power supply or Mac performance. What a gem ! God knows I've looked into all kinds of alternatives that could have cost hundreds instead of $5.

Question about the Power adapter

I just got my Macbook and I love it but I'm a bit confused as to the function of the power adapter. I plugged it in and it started to charge my battery. Is this supposed to happen? I thought the function of the adapter was to provide continuous power from an outlet supply. Maybe I'm under the impression that the second cord I received with my macbook is a power supply cord. Is it?

Also You can run the computer without your battery in but I believe it's not good for the computer.
This link explains the point you were making. MacBook reduces processor speed when battery is removed while operating from an A/C adaptor

Overheating at the power adapter location shuts down computer

On occation Powerbook gets hot near the power adapter input. The unit shuts down with what sounds like the fan running, I must hold down the power button until it restarts. The unit is on a flat hard surface and the battery and charger function properly. I ran the hardware test, off the CD, which indicted all OK.
Any ideas of what the problem may be?
Powerbook G4 15 Mac OS X (10.3.9)

The best thing that you can do is purchase an enclosure for your internal drive (see -> http://eshop.macsales.com/search/2.5%22+usb+enclosures), use a Phillips #00 screwdriver and a Torx T6 screwdriver (also available in a kit from OWC/macsales -> http://eshop.macsales.com/item/NewerTech/TOOLKIT14/) and get the hard drive out and into the enclosure (it's quite simple to do and there are videos at OWC that will help -> http://eshop.macsales.com/installvideos/).
Once the drive is in the enclosure you can plug it into any Mac and retrieve your data. Probably the best thing to do would be purchasing an external drive and copying (or cloning, see -> http://www.bombich.com/) the data from your internal (now in the enclosure) to the external drive.
Then reverse the process, putting your internal drive back in place, and take your machine to your local Apple Store or an AASP. I know that it sounds rather convoluted, but you'll be able to use the external drive afterwards to make backups (see -> Most commonly used backup methods).
Make sense? Or am I just being confusing?
Clinton

Can BT sport run through the power adapter connect...

Similar Messages

Maybe you are looking for