Can Call Manager support network side Q.931 from H.323 gateways

With CCM 3.1, is it possible to support network side E1 Q.931 on a H.323 gateway. This would allow PABXs to connect to CCM, which then allow CCM to act as a tandem exchange.

The network side support on the H323 gateway
is transparent to the CCM. They are two seperate call legs.
1. pots for E1 PRI and
2. voip call leg to CCM.
The support for network side PRI is on 2600/3600/3700/7700/AS5300,AS5800
and its been available since 12.1(3)T and please use
a more recent image 12.2T train ip plus at the least.

Similar Messages

What versions of Call Manager support the new VG3XX Voice Gateways?

What versions of Call Manager support the new VG3XX Voice Gateways?

http://www.cisco.com/c/en/us/td/docs/routers/access/vg350/software/configuration/guide/vg350_scg/scgapp_platforms_ORIG.html#64565

TS2972 My Apple TV 3 can not set time network, since one week from now, before was working perfectly

My Apple TV 3 just stop working, it can not set the time network I have call for support and done everything as requested and still nothing, can somebody help me with This it has pass a week and nothing yet. I even restored as support toll me too, no timé still can be set. HELP PLEASE

I have the exact same problem as KAR1973, and have tried everything. Relatively new latest Gen ATV, worked fine for couple months, then suddenly today will not set network time, will not activate, and only shows the "computer" and "settings" icons on menu screen. Will not allow me to log into AppleID/Itunes account.
Very frustrating. Tried resetting, restoring (on screen and directly connected to Itunes) mutliple times, rebooted router multiple times, even checked the ntp settings in router (get network time shows as "enabled"), tried it all on wireless and ethernet, and still same problem.
Appears many people have same problem based on google searches. My question is what is Apple doing about this?? Am tired of spending hours trying to figure this out, so am putting it away, and will buy a Roku or another competitor's box instead.
Apple needs to do a better job standing by its product, figure out what the problem is, and put out some helpful guidance, particularly for people who don't have advanced computer or network expertise (inculding myself.)

I cannot download photoshop elements. It shows an error 109. Communication error. No phone number that is listed for anything adobe works to where I can call for support.

I had an error on my Photoshop Elements 12. It would not bring the program up at all. I have tried uninstalling and reinstalling and it will not download. I have now erased the download for the 3rd time and I have tried every phone number for assistance with Adobe. NOT a single number works. There is no online tutorial helps me with anything. I have a new Windows 8 version and when I first bought the computer it took me a while to download. But I did and it worked for about 30 days.

Error 10# (any #) : Troubleshoot Adobe Download Assistant :
http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

Can I manage my ATT cellular data account from a website and not from my device?

I have an iPad2 (iOS 7.0.6) with an ATT cellular data plan for 2GB for 30 days. Received a usage alert that I only have 0.4 GB left for the remaining 11 days in the billing period. Settings/Cellular Data/Account (after logging in) only gives macro information about the total usage.
Is there a way to get more detail about cellular data usage? Like broken down between email, streaming music, web surfing, etc? The website www.att.com/att/datacalculator lets you make estimates, but is there a way to use this itemized format to see your actual usage?
Also, is there a way to manage my Cellular Data account online without using the iPad (and without having to suffer through a customer support voice menu that probably won't let me talk to a live person)? I tried going to www.attwireless.com and using my iPad cellular data account login info there, but the site said I couldn't monitor the device from there (I can only use it for our cellphones). I'm now in a data conservation mindset and am afraid that accessing the cellular data account to modify the data plan is going to swallow all the remaining data for the month.

The AT&T web site may not break it down, but iOS 7 does. If you go into Settings -> Cellular Data down near the bottom it provides a list of apps and how much cellular data they have used since you last reset your cellular data counters. For me, I last reset my counters Sept 11, 2013, and since then I have used 19.5GB on my AT&T cellular network. Below that it gives a list broken down by app and how much data each has used.

How can I manage 2 iPods and an iPhone from one laptop?

I have replaced my laptop, upgraded my phone to an iPhone, replaced a broken iPod screen that was broken within the first month of purchase from Apple direct and Apple has not been any help in assisting me with getting all of this syncronized. I cannot even get access to a PERSON one time to set this all up.
I have changed my passwords so many times that one of the iPods (the NEWEST VERSION) has been out of use for over 4 months! I am so disgusted with all of this. We are sharing music we don't even like because we cannot listen to our own music. It was never this difficult with our old mp3 devices!
Is there anyone who can help me???
I have a mentally handicapped 20 year old grandson that loves his iPod. It was one of his Christmas gifts last year and it was damaged when he dropped it on the school bus last winter. I had to pay almost $100 to have the screen replaced, but could not afford to do it until this past spring. By then I had forgotten his passwords and had to set up a new email. Then, my computer had to be replaced and we were without internet for some time. By the time we needed the password again, I could not locate it. Now I have to start over! This seems to be only a problem with Apple. He has a Kindle Fire and we do not have this problem with Amazon.
My husband is a painting contractor. I thought I was doing him a great favor by giving him an iPod as a gift. But that has also been a disaster. He can't listen to his music because I cannot separate his music files from our master file. I wish I had just bought him a new mp3 player instead of an iPod.
PLEASE HELP!!! DOES ANYONE KNOW HOW TO REACH A REP FROM APPLE???
...LIKE A LIVE PERSON??? I DON'T LIVE NEAR A CITY. I'M IN RURAL SOUTHERN OHIO.
Penny

How to use multiple iPods with one computer
http://docs.info.apple.com/article.html?artnum=300432
Managing content manually on iPod
http://docs.info.apple.com/article.html?artnum=61148
iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920
Patrick

Call Forwarding / Displayed Number on Forwarding target with H.323 Gateway

Hi Community,
i´m wondering if there is sort of a simple way to get this working properly.
Scenario:
Germany, variable dial plan, no fixed NANP, and we have ClipNoScreening ;)
We use 0 for getting PSTN-dialing.
We have internal DNs, for example a 6789, 4 Digits. We use external phone number mask on our lines, 123456XXX
Our main number is 0123/456-xxx
When i call outside everything is displayed fine on the called target, +49 123/456789.
When i forward a call on my cellphone, with CFA target of 00111/222333444 (my cellphone example), and an internal colleague from within our office, is calling my office phone, everything is ALSO displayed fine.
Now here comes the BUT:
When someone calls from PSTN on my office-phone, i get displayed on my cellphone the +49 (0) 0xxxxxxxx, which means the caller number PLUS the added 0 from the gateway. Which is completely consequent and correct, since we add them on the gateway, when a call comes in, to be able to just answer directly on the office phone.
The rule on the H323 gateway:
voice translation-profile OUTGOING-VOIP
translate calling 1
translate called 2
voice translation-rule 1
rule 1 /^$.*$/ /0\1/ type subscriber unknown plan any unknown
rule 2 /^$.*$/ /00\1/ type national unknown plan any unknown
rule 3 /^$.*$/ /000\1/ type international unknown plan any unknown
voice translation-rule 2
rule 6 /4560$/ /6600/
rule 9 /^456$...$$/ /6\1/
voice translation-profile OUTGOING-POTS
translate calling 3
translate called 4
voice translation-rule 3
rule 1 /^00049/ /0/ type unknown national
rule 2 /^0/ // type unknown subscriber
rule 3 /^00/ /0/ type unknown national
rule 4 /^000/ /00/ type unknown international
voice translation-rule 4
rule 2 /^00049$.*$$/ /\1/ type unknown national
rule 3 /^000$.*$$/ /\1/ type unknown international
rule 4 /^00$.*$$/ /\1/ type unknown national
rule 5 /^0$.*$$/ /\1/ type unknown subscriber
dial-peer voice 10456 voip
translation-profile outgoing OUTGOING-VOIP
destination-pattern 456.T
progress_ind setup enable 3
modem passthrough nse codec g711ulaw
session target ipv4:<IP-OF-CUCM>
incoming called-number .
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate disable
fax protocol pass-through g711ulaw
no vad
no supplementary-service h225-notify cid-update
dial-peer voice 345000 pots
tone ringback alert-no-PI
translation-profile outgoing OUTGOING-POTS
destination-pattern 0.T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/0:15
forward-digits all
In case of forwarding the external call to an external device, like for example a cellphone, this is crap.
Its obvious regarding the debugs all is working as designed ;), because my phone just forwards the full calling number including the added 0, since i put in to forward the originating calling DN.
My question now:
Can i simply correct this behavior somehow, also for international calls which would the 00 get added by the gateway?
Many thanks in advance for some input,
Andreas

Hi Community,
i´m wondering if there is sort of a simple way to get this working properly.
Scenario:
Germany, variable dial plan, no fixed NANP, and we have ClipNoScreening ;)
We use 0 for getting PSTN-dialing.
We have internal DNs, for example a 6789, 4 Digits. We use external phone number mask on our lines, 123456XXX
Our main number is 0123/456-xxx
When i call outside everything is displayed fine on the called target, +49 123/456789.
When i forward a call on my cellphone, with CFA target of 00111/222333444 (my cellphone example), and an internal colleague from within our office, is calling my office phone, everything is ALSO displayed fine.
Now here comes the BUT:
When someone calls from PSTN on my office-phone, i get displayed on my cellphone the +49 (0) 0xxxxxxxx, which means the caller number PLUS the added 0 from the gateway. Which is completely consequent and correct, since we add them on the gateway, when a call comes in, to be able to just answer directly on the office phone.
The rule on the H323 gateway:
voice translation-profile OUTGOING-VOIP
translate calling 1
translate called 2
voice translation-rule 1
rule 1 /^$.*$/ /0\1/ type subscriber unknown plan any unknown
rule 2 /^$.*$/ /00\1/ type national unknown plan any unknown
rule 3 /^$.*$/ /000\1/ type international unknown plan any unknown
voice translation-rule 2
rule 6 /4560$/ /6600/
rule 9 /^456$...$$/ /6\1/
voice translation-profile OUTGOING-POTS
translate calling 3
translate called 4
voice translation-rule 3
rule 1 /^00049/ /0/ type unknown national
rule 2 /^0/ // type unknown subscriber
rule 3 /^00/ /0/ type unknown national
rule 4 /^000/ /00/ type unknown international
voice translation-rule 4
rule 2 /^00049$.*$$/ /\1/ type unknown national
rule 3 /^000$.*$$/ /\1/ type unknown international
rule 4 /^00$.*$$/ /\1/ type unknown national
rule 5 /^0$.*$$/ /\1/ type unknown subscriber
dial-peer voice 10456 voip
translation-profile outgoing OUTGOING-VOIP
destination-pattern 456.T
progress_ind setup enable 3
modem passthrough nse codec g711ulaw
session target ipv4:<IP-OF-CUCM>
incoming called-number .
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
fax-relay ecm disable
fax rate disable
fax protocol pass-through g711ulaw
no vad
no supplementary-service h225-notify cid-update
dial-peer voice 345000 pots
tone ringback alert-no-PI
translation-profile outgoing OUTGOING-POTS
destination-pattern 0.T
progress_ind alert enable 8
progress_ind progress enable 8
progress_ind connect enable 8
port 0/0/0:15
forward-digits all
In case of forwarding the external call to an external device, like for example a cellphone, this is crap.
Its obvious regarding the debugs all is working as designed ;), because my phone just forwards the full calling number including the added 0, since i put in to forward the originating calling DN.
My question now:
Can i simply correct this behavior somehow, also for international calls which would the 00 get added by the gateway?
Many thanks in advance for some input,
Andreas

Cisco Call Manager 5.1 and Cisco VoIP Gateways

Hi,
I have Cisco Call Manager 5.1 with Cisco 2800 series routers as a ISDN gateways and Cisco VG224/ATA 186 as POTS gateways. While Cisco Call Manager collects call statistics from 7900 series SCCP handsets managed by the Call Manager (number of VoIP packets, dropped frames etc.), it shows only one side of the call as it does not collect statistics from the Cisco routers (configured as H.323 gateways), the Cisco VG224 (with ports configured as H.323 gateways and as a SCCP devices) and Cisco ATA 186 (configured for SCCP).
Is the collection of these statistics possible? What needs to be done?
Thanks,
Paul

Update: Logging of QoS/Call Management Records (CMR) to Call Manager CDR database is not possible with H.323 gateways; only MGCP gateways:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a008020650a.shtml#qa4
Anyone know how to get the Cisco router gateway to log these statistics anyway using standard router logging mechanisms (e.g. syslog)?
Anyone know about calls to SCCP ports on Cisco VG224 or ATA 186?
Thanks,
Paul

OMG MY IPOD TOUCH 2G IS DISABLED I DONT KNOW WHAT TO DO. SHOULD I CALL APPLE SUPPORT SO THEY CAN DO SOMTHING BECAUSE I DONT HAVE INTERNET ACESS TO DOWNLOAD ITUNES. PLEASE HELP

My iPod touch 2g is disabled and I don't have internet acess to download itunes. Iit wanted to know if I can call apple support to fix it. Can anyone tell me what to do??

You will have to put it in recovery mode on a computer with itunes.
There is no other way at all.

My photoshop 10 has stopped working is there a telephone number for support that I can call to find out how to fix the problem???

My photo shop 10 program has stopped working. Is there a telephone number that I can call for support to find out how to fix the problem???Jenny

Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Cisco Call Manager and LifeSize Endpoints

Hello dear support community,
last week I asked which version of Cisco Call Manager supports BFCP (https://supportforums.cisco.com/message/3966334).
Unfortunately I asked the wrong question.
As it turns out I just didn't need to know which version of Call Manager supports BFCP, which I know now, I also need to know if Call Manager is compatible with LifeSize systems?
Here is the setting, so you know what I'm dealing with:
The costumer uses Cisco Call Manager (Ver. 9.1) as SIP registrar for his LifeSize endpoints. The problem is, when he is making a video conference (via SIP) and he wants to share a presentation, the other side either sees him or the presentation, but not both.
We tried it with our Call Manager (Ver. 9.0) and some LifeSize endpoints. As soon as the LifeSize endpoint uses CUCM as SIP registrar, the option to share the presentation is completely gone.
I guess the costumer switched sources from cam to pc. That would explain why he just sees either video or presentation. But, as you might have guessed, it's not an acceptable solution for the costumer.
And yes, we made sure that BFCP is enabled for the endpoints.
So, what I'm asking myself and you is:
Is this known? And more important, is there a reliable workaround?
Thanks a lot in advance.
Best regards
Tobias

I've been down this road and when I asked the question Lifesize's stance was that it wasn't supported by THEM. I pointed out that CUCM now supports line-side BFCP but they essentially shrugged their shoulders. Either they are blatently disabling content sharing by virtue of using a SIP Proxy or they have a priorietary SDP/header that CUCM isn't passing through.
Either you can call Lifesize and shake them up a bit or you can wireshark the SIP dialog to see what the codec asks CUCM before disabling the sharing button. Once you know that you might be able to use SIP transparancy to pass the header through.

Paging with Call Manager

Does Call Manager v8.5 support paging on mulitple phones (groups of phones) simultaneously or does it require another product? We purchased IPSESSIONs a while back to use for paging but I was told that the function was in Call Manager. We have had CM for a few years and we are just now getting ready for paging and some other UC functions.
Next question. With IP sesssions I have to configure on IP multicasting throughout our network to support paging. Can I assume that even if Call Manager supported it internally without the necessity of IPSESSIONs that I would still need the IP Multicasting protocol support on our entire network for paging?

Hello,
Chris is right that 3rd party app is needed. But I don't agree that Informacast is the best one.
What about an alternative in 2Ring PHONE SERVICES which can deliver much more than just paging?
If you are interested in getting more info, follow this link: http://www.2ring.com/NewJuice
FREE and TRIAL licenses are obviously available.
As for your 2nd question, yes, multicast should be enabled in entire network.
Regards,
Martin

Call Manager forwarding alerts

Hello. Does anyone know of any integrations between Cisco Call Manager and other network mgmt platforms like HPOpenView NNM or Ciscoworks? Can Call Manager send alerts to other Network Management platforms?

I know that there is that plugin that Cisco provides, but I am seeking the same thing. To know about call thresholds, etc.
Let me know if you found anything.

Where is the page manage my network extender

I need to log in to my network extender and modify the numbers that are assigned to it. Where do I find that? I had it and bookmarked it now it says the site is not available.
Thanks

john51,
You can certainly manage your network extender! You can modify your numbers here: http://vz.to/1BdJSOB Are you signed in with the Account Holder phone number? This can possibly be why you aren't able to make any changes. Please advise if you have any more questions.
AmberF_VZW
Follow us on Twitter @VZWSupport

Is there a phone number we can call

Is there a phone number we can call for support?

Welcome to Apple Support Communities
You can contact with Apple by phone if you want > http://support.apple.com/kb/HE57

Can Call Manager support network side Q.931 from H.323 gateways

Similar Messages

Maybe you are looking for