Can call out but not receiving calls

I can call out to any number but when you dial the phone number(yes it is the right #) it says phone not in service.

We have had the same problem for almost a year now. We can call out, and the number is correct. Cannot receive any calls, message says number not in service. Meanwhile I have to pay both AT&T and Comcast so I don't lose my number. When I call Comcast I am told the problem is not on their side. I will be calling the Illinois Commerce Hotline and filing a complaint against Comcast. I have asked for a credit on my bill, since I am not receiving the service I am paying for, and no response from Comcast. Maybe a lawsuit is in my future for failure to provide services that were paid for.

Similar Messages

I upgraded to lion today and just realized I am not receiving any mail. I can send out but not receive. i'm using a POP Road Runner account. Any help appreciated.

I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.

Try Mail->Window->Connection Doctor. If there is a problem reported, try:
Open Mail->Preferences and check your settings.
If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account

Can send SMS but not receive after update...

After updating my iPhone 4S to ios6 i have problems with receiving messages.I can send SMS but not receive. What to do?

Although I don't believe in consequences, I think this might be one of them. My email was working fine until I installed my VPN. I use the Thunderbird email application, which I like a lot, for three Hotmail accounts and two Yahoo accounts. After installing the VPN I could receive mail but could not send it on any of my accounts. I contacted the VPN and they sent me some numeric IP Addresses to put in my account settings. One for the Hotmail accounts and one for the Yahoo accounts. I did as instructed and the email seemed to work okay. It was late in the evening and I went to bed. The next morning, I could send and receive emails on the Yahoo accounts, but could only send emails on all of the Hotmail accounts.
I guess I'd like to know if anyone else is having this same problem. I'd hate to think it was just me. :-)
I would like for Thunderbird to tell me if there is a way to change the outgoing server in the Account Settings, so I can enter the IP Address in there, or does the fact that I entered an IP Address in the Server Name box, cause it to override any other entries? Or should that even make a difference with me receiving mail?
Also, at what time limit does Thunderbird send back a message that the connection to the server timed out? I continually get that message.
I found a way to do a ping on the Hotmail server and the fastest response time for the last two days was 258.09 which seems very slow for a business computer. At least for a business that wants to stay in business. So is that time above the Thunderbird threshold of the connection time out message to be generated?
Thanks for all your help and suggestions, Carole

Why can I send but not receive them?

Why can I send but not receive them?

Macrumors posted a solution for this. I used it and it seems to have worked for me.
Here's what they said:
1. Turn off iMessage in Settings > Messages
2. Reset networking settings in Settings > General > Reset
3. Reenable iMessage in Settings > Messages
Source:
http://www.macrumors.com/2013/09/30/resetting-network-settings-may-fix-imessages -not-working-in-ios-7/

I can send emails but not receive them. The sender address was rejected by the server

i can send emails but not receive them. The sender address was rejected by the server.

Your mail server doesn't like the sender's address for some reason, perhaps because his mail server has been blacklisted for spamming.

HT1430 hey, I just reset my Apple ID and suddenly much of my Iphone text history disappeared. and I can send texts, but not receive any. what do I do? is this related to AppleID, or is the text issue from something else? thx!

hey, I just reset my Apple ID and suddenly much of my Iphone text history disappeared. and I can send texts, but not receive any. what do I do? is this related to AppleID, or is the text issue from something else? thx!

Hi blyther,
Thanks for using Apple Support Communities. If you're unable to receive texts, see this article for troubleshooting steps:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
- Ari

Can send packets, but not receive packets

Running Windows XP, my Internet was working fine and then stopped working. It still shows that I am connected to the Wireless Network and shows that packets are being sent, but not received. Will work directly from the cable, but not wireless. Tested Wifi card on other computer, that works, Internet is working on other computer wirelessly.
Any options?
Using Wireless-G Notebook Adapter with SpeedBooster WPC54GS
Broadband Router WRT54GSMessage Edited by tiggerx40 on 10-09-200603:49 PM

What is the router model number and version? You may find the model number underneath the router itself on one of the stickers.
Anyway, if you are plugged in to the router:
1) open up internet explorer and go to 192.168.1.1
2) username: just leave it blank password: admin
3) go to the wireless tab:
You may change the ff:
SSID - this is the name of your network
Channel - signal of the router (suggested value is 11)
----> save settings after you have done the necessary changes
4) go the wireless security (found on the subtab)
set-up security:
- suggested mode is WPA Personal
If your router is a WRT54G v5-v6, go to the status page:
- check the firmware version, if the firmware version belong to any of the ff. below then download and upgrade the firmware.
► 1.00.1
► 1.00.4
► 1.00.6
► 1.00.7
► 1.00.9

I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

I can send emails but not receive any??

Hey guys n gals,
I'm new to Blackberry and to be honest I'm not the most technical person in the world!
I have recently been given a blackberry pearl 8100. have enabled the bolt on with 02 etc.
I can send emails but i can't receive any - would really appreciate any help you can give me
Thanks
Solved!
Go to Solution.

Hello CWNI,
Check out this KB article, it should help you
http://www.blackberry.com/btsc/kb02857
Hope that helps!
More than likely, you use outlook or similar application on your computer for email and it is just not leaving a copy of the message on the mail server.

Can send mail but not receive -- connection doctor OK, GetInfo shows msgs

In the last couple of days I stopped receiving email on my Mac in the Mail app, but not my PC. Both access POP3 accounts at the same ISP, different POP3 accounts. All software is patched to latest version using Software Update -- PowerMac G5 Dual, latest OSX version. On the Mac, connection doctor says I'm A-OK (internet connection, POP connection, SMTP connection.) Also, if I do a Get Info on the inbox and show messages on the server, it shows 75 messages on the server. I have not retrieved messages to my knowledge (so I don't think the server thinks I already downloaded them), and the "Messages that have been downloaded to my Mac" pulldown option in Get Info confirms this, by not showing any of the 75 messages in the Show all messages pulldown option. But -- Get Mail does nothing! I have tried rebooting, deleting and recreating the account, etc. Since I can get POP mail for another account at the same ISP on my PC, and I have touched nothing on the Mac, and all the diagnostics show the connection and POP3 chat is working perfectly, this very strange. I do not think I have applied any patches or anything that might screw it up, but who knows.
The only strange thing that might be a clue is the little spinning status indicator next to the InBox label runs for about 30 sec or so before it decides not to do anything -- seems a little long. Any suggestions? Any way to do detailed debugging of the POP3 session to see if the Mac-server conversation is wanked up somehow?
Thanks!
David

For POP accounts, Mail uses a file within the account folder to keep track of which messages have already been downloaded. Deleting it should cause Mail to download everything still on the server as if new. I don't think it'll work in your case, but try it anyway just to be sure:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate one or two files named MessageUidsAlreadyDownloaded and move them to the Trash. Mail 1.x used MessageUidsAlreadyDownloaded to keep track of which messages had already been downloaded. Mail 2.x uses MessageUidsAlreadyDownloaded2 for the same purpose.
You can use the Account Info window first to remove from the server any messages you don't want to be downloaded again.
You may try creating a new user account in System Preferences > Accounts, set up mail anew there, and see whether the problem happens there as well.
Another thing you may try is using a different method to connect to Internet, if possible. Also, if Preferences > Check for new mail is set to Every minute, changing it to something greater (e.g. Every 5 minutes) might help.
Something that usually works is removing some messages from the server (download them with another mail client first, to avoid losing them). Sometimes, Mail chokes on a message it cannot download, and that prevents it from downloading the rest as well.
Any way to do detailed debugging of the POP3 session to
see if the Mac-server conversation is wanked up somehow?
Detailed debugging no, but looking at the Console could be informative:
1. Open /Applications/Utilities/Console.
2. From the File menu, choose either Open Console Log, or Open System Log, or both, so that the Console application displays the contents of both system.log and console.log.
3. Try to reproduce the problem and look at the bottom of the Console windows for messages that might be written there as a result. They may provide some clues as to what the problem is.

2 Wireless routers, I can get out but not in

I was hoping you might be able to help me with my configuration, I've almost got it, there's just something I'm missing. I've had a wireless G router (WRT54G) running nicely in my network for some time now, and since my wife and I both just got 802.11n capable laptops, I thought I'd like to upgrade and bought an N capable router (WRT320N.)
I would like to dedicate the N router to the laptops and use the gigabit ports for our wired computers/server downstairs. I still have some G-only devices (PS3, Xbox, iPhone, older laptops) that I would like to connect to the old G router. I also use my PS3 as a DLNA server so would like to be able to get to the wired server on the N router from the PS3 wireless on the G network. (I'll just use N and G router from now on, you know what I mean )
So, I pulled the G router off the network. Configured the N router as DHCP, with an internal address of 10.1.1.1 and plugged it into the WAN port of my modem. Plugged the G router into my laptop, and statically configured the outside interface as 10.1.1.254 and the inside interface as 192.168.1.1 and plugged its WAN port into one of the 'LAN' ports on the N router. (I left the internal addresses on the G router DHCP at 192.168.1.x, since I have some static addresses on the G network)
Back at the N router, I went into advanced routing and added an entry for 192.168.1.0 255.255.255.0 gateway 10.1.1.254 for 'LAN and Wireless'
So far so good.
I can connect to the G and N networks just fine, and can get out to the net from both of them. I can get from the G network from the N network just fine. Where I am having trouble is getting from the N network to the G network.
I went back to the G router and turned off all the security settings (Block Anonymous Internet, Filter Multi, Filter Internet NAT) but just can't quite see what I'm doing wrong.
I can't even ping 192.168.1.1 from the router.
I sure would appreciate any help or suggestions!
Thanks,
Dan
Solved!
Go to Solution.

Try setting the G router in 'Router' mode, rather than 'Gateway' mode.
Tomato 1.25vpn3.4 (SgtPepperKSU MOD) on a Buffalo WHR-HP-G54
D-Link DSM-320 (Wired)
Wii (Wireless) - PS3 (Wired), PSP (Wireless) - XBox360 (Wired)
SonyBDP-S360 (Wired)
Linksys NSLU2 Firmware Unslung 6.10 Beta unslung to a 2Gb thumb, w/1 Maxtor OneTouch III 200Gb
IOmega StorCenter ix2 1TB NAS
Linksys WVC54G w/FW V2.12EU
and assorted wired and wireless PCs and laptops

Texts can be sent but not received

My daughters Droid 2 can send texts and sometimes receive them. At other times she stops receiving them and then gets 20 at once that had been sent and never came thru. We just received a replacement phone, the original phone was doing it also. Is it the phone or the service? My son has it happen with his Droid 2 also, he doesn't text as much so we didn't know it was happening right away.

That's pretty odd. Does your daughter have a large quantity of text messages in her inbox?
Many times if this is the case, then there can be a delay with the messages.
Is she using the texting app that came installed on her phone or did she happen to install a 3rd party texting app?
First, have her clear out the texts she doesn't need.
Then have her go to Settings>Applications>Manage Applications>select ALL at the top>look for Messaging or SMS> clear cache
Once she has done that, please advise if she is still having problems with her messaging being delayed.

SIP Problem - Can make, but not receive calls

I two E-Series phones (E51 and E71). The E71 is configured to connect over my WLAN to my corportate phone system. this works perfectly for making and receiving internal and external calls, however, my E51 can only make calls. both phones have identical settings with regard to my phone system but i wonder if there is a known bug and more importantly a workaround? i have also tried to configure a spare E65 and this presents the same problem as the E51.
Any ideas? starting to get a headache over this....
Many thanks
Ben

I am sorry I didn't get back to you but I have been away for a while. I have discovered that when I turn the firewall off on my imac I can receive Facetime calls - turn it back on and I can't. Seems a little silly that Apple's own firewall blocks Facetime.
I wonder if anyone else has this problem. I am a little concerned about having to keep my firewall turned off.
Thank you very much for your help anyway.

You can see the numbers on call id but not the caller name

I can see the number when an incoming call comes in, but I can not see the name even though it is in my contact list. Can someone suggest how to correct his issue?

Please give us the exact error message.
Please state your operating system.
Please state the exact version of Lightroom you are using.
Please give us any other relevant details.
What does this mean: "Now all of a sudden I can see the images on the screen"? Are you looking in Lightroom or your operating system or the camera screen? Where?

HT2500 cannot receive mail on my mac. I can connect to the net and send mail out but not receiving

I cannot reveive mail,but can send and I'm connected to the net.

http://support.apple.com/kb/HT1277
This should help you sort things out.

Can call out but not receiving calls

Similar Messages

Maybe you are looking for