Can Captivate 4 project files be opened in Captivate 5?

I was wondering if captivate 4 project files can be opened in captivate 5? I know captivate 2 project files cannot.
Thanks guys,
Kya.

Hello and welcome on the forum (see it is your first posting),
Normally there are no issues when opening CP4-files in CP5: they will be converted, including the advanced actions (if there are) and to AS3 if the CP4 was AS2 because CP5 only supports AS2. I only had some few issues with those convertions.
Beware: you will not be able to open the converted file in CP4 anymore. As always, be careful to keep the original files stored safely somewhere.
Lilybiri

Similar Messages

Need help badly. project file wont open. saying damaged file or may contain outdated elements. please help

project file wont open. damaged file or contains outdated elements message. i believe its an XML error but i dont know how to fix it. please help

As a happy user of the Matrox RT.X2 for many years, and later an equally happy user of a Matrox MXO2, I can say from experience that it is highly unlikely that this problem has anything to do with the Matrox hardware!
Can you open a new blank project, and save it?
If you cannot import your faulty project into a new project, can you import the sequence from your faulty project?
Have you tried clearing the Media Cache, clearing your preferences, etc. - all among the techniques used to resurrect a Premiere Pro project that has gone bad???

Can't checkout Project files from SharePoint 2013

I have library with 'require checkout' set that contains mpp files. I have MS Project 2013 (SP1) installed locally.
If I choose edit for one of the mpp files, it simply opens in MS project as read-only and doesn't allow me to save it (only as a local copy). There's no option to check-out anywhere. Obviously I can check-out manually in SP before opening then check in again
afterward but it seems clearly wrong that I'm allowed to click "Edit", make changes, but then be unable to save back to SP again (even if you switch back to SP to check-out, Project still thinks you've opened it Read Only and won't let you save back
to SP).
What am I missing?

Hi Dylan,
Didn't you have this message just above the ribbon in MS Project 2013?
Using Project Server 2013, MS Project by default opens projects in read-only mode, the user having to intentionnally click on the "check-out" button to check it out. That being said, I'm not sure if the behavior is the same with a project plan opened from
a SharePoint librairy but it is worth checking this point.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

HT203477 Project File not Opening. 524MB?!

Hi!
I'm running FCP X on a Retina Display MBPro with 16GB RAM. I work out from a Firewire 800 drive dock since I haven't been able to get a thunderbolt drive yet. In this drive I have several projects (5 of them where created by Plural Eyes for Syncing). One of those projects is the actual film I'm working on around 8min long. The system started giving me problems when I started editing sound effects and putting effects on clips. The film is almost to omplition when FCP crash. I restarted it again but that one project film doesn't open. Instead FCP X stays open on the splash screen and does the pin wheel. I did all the troubleshooting prosedures plus try to fix the project file thinking it was corrupted with a third party application but nothing good has happen yet. I try to open the project on a different system but when I open FCP X it opens on the previews project that was been worked in that system. When you hit to go to the Project Library it start doing the Pin Wheel all over again. I read on the internet of a similar case where the project file was 500MB big. Mine is 524MB. The person said that they wated it off living FCP open doing it's thing and after 8 hours it open. I'm actually doing the same thing right now and I still have almost 6 hours to go. My question is why did this happen and can it be prevented and how to fix the file? Also, is the Apple FCP team dealing with fixing this bugs?

Hi Kodeeswaran,
There could many reasons why this is happening. I would suggest the following steps.
1) Check to see if LabVIEW is properly activated or not.
2) Check if you are an administrator of that particular machine.
3) Try out the steps provided in this KnowledgeBase
4) Has the same set of CDs worked on any other machine where you've tried installing the software. There is every possibility you have a bad installation disk.
Thank you and have a nice day.

Premiere Elements Project file wount open in Premiere Pro CS6

My friend Just bought Premiere elements 13 and created a Project. I cant open the Project in Premiere Pro CS6. Getting this error message:
"The Project appears to be damaged, it cannot be opened."
The Project workes fine in Premiere Elements 13
What can I do? What is wrong?

If you have done this:
Import a Premiere Elements project (Windows only)
   Select File > Open Project.
   Browse to an Adobe Premiere Elements project file, with file extension PREL.
   Click Open.
Premiere Pro converts the Premiere Elements project file to a Premiere Pro project file.
and it wont work Elements 13 is probably too new for CS6.

Can't load project file in Encore CS6

I can't seem to load my project file anymore. I was working on a BluRay project and when I now try and open my project file it just hangs at about 13% open. Is there any way to salvage my work? I'd hate to have to start over. It has mostly Dynamic links to Premiere Timelines and subtitles. I didn't get to the navigation parts or sound. Any ideas?

Yes, Premiere is open, but it doesn't have any effect on opening my Encore project. Any other ideas?

Project file not opening in my system

I have installed a new LabVIEW 8.2 and all the drivers resourses also, i am not able to open th project file, sometimes the NIMax is not opening and keeps me installing again and again but not working properly.even after formating the system i am not able to install labview propely, there is no antivirus software installed in it. any one faced this problem earlier...

Hi Kodeeswaran,
There could many reasons why this is happening. I would suggest the following steps.
1) Check to see if LabVIEW is properly activated or not.
2) Check if you are an administrator of that particular machine.
3) Try out the steps provided in this KnowledgeBase
4) Has the same set of CDs worked on any other machine where you've tried installing the software. There is every possibility you have a bad installation disk.
Thank you and have a nice day.

In Premiere Elements 13 can I link project files?

Can .prml file be compiled into a movie?

Koollkid
I am assuming that there is a typing error in your introductory details when you wrote
Can .prml file be compiled into a movie?
Are you referring to the Premiere Elements project file which has a .prel file extension. If not, what kind of file is
a .prml file? Where is it coming from?
Generalization for now, pending your clarification on what you seek and assuming that .prml = .prel.....
1. When you import source files into a project, the way out is via export - Premiere Elements 13 Publish+Share/ and then
the choices that you see which can offer you burn to disc as well as export to file opportunities.
2. You cannot import a project file into another project file. If you want to put the content of project 1 into project 2, you
have at least two choices
a. Export the Timeline content from project 1 to file that is compatible with the settings of project 2, and then import that
file into project 2
b. If you are working on a Windows computer, use ClipMate in conjunction with Premiere Elements for a copy/paste
insert between projects (I have not tried this yet in version 13; it has worked in several earlier versions).
So, basically this all resolves to
a. What is your source media?
b. What are your requirements for exporting the Timeline content for you and other to see?
We will be watching for your follow up with clarification.
Thank you.
ATR

Final Cut Pro X program crashed can't find project files

Final Cut Pro X jsut crashed on me and I am now unable to open up any of the project files. Please help. Every time I try to open up a file it says that the project file cannot be openend, that is all it says, no info, no error explanation.
Poof - months worth of work gone.
HELP ME I HAVE TO FINSIH THIS PROJECT TONIGHT!

Try replacing the currentversion with the backup version.

Project file wont open

Help.
I cant open my Premiere Pro project files. After renaming some of the source files now Premiere says 'file format not supported' when I try to open. The same computer and program generated these files. I know I have to relink the media but any ideas why it wont open the project files?
TNX
Premier Pro 7.0
HP Pavilion Elite m9515y, PC

Are these MPEG, or VOB's? If so, this Adobe KB Article might help.
If they are M2t files, then this ARTICLE might help.
If none of the above, please tell us the full details of your Assets and also you Project Presets.
Good luck,
Hunt

Can't relink project files in FCP X

I moved some projects and events to a new harddrive (drag and drop not through FCP X like I should have) and now FCP can't find the project files. The event footage all shows up in the library and I can play it, but when I click on the project it says Missing Event. When I right click on the project and try to relink project it doesn't give me any options for missing media to reconnect other than the graphic (see screenshot). If I go to file and click relink event it let's me reconnect to the event files. I know where all the files are, FCP just isn't giving me a way to relink them. HELP!

I'm having the same problem. I am using FCPX 10.1.1. After moving to a usb external hard drive and back, one of my projects has 'unlinked' all the files that are in the timeline and releated to the project, all the other files are ok.
I had copied the event from another hard drive, but it seems the project id now referncing the wrong event in the inspector? Not sure how to change this now. I am not being given the option to modify referenced event?

Can't change all files to open with CS2 with CS3 installed

I have InDesign CS2 and CS3 installed on my macbook (10.5). CS3 is buggy to the point where its unusable, but I need it installed because once in awhile I receive files saved in that format.
I wanted to change, through any Get Info window, all Indesign files to Open With CS2 instead of CS3. Problem is, whenever I hit "apply to all files" the OS just instantly changes the program back to CS3.
Anyone else having this problem?

Let me be a bit clearer.
When I installed CS3, it switched the "Open With" program association of all my CS2 files to CS3. This means the icons for all my CS2 files changed to CS3 icons. And when I double click on my CS2 files, they open in CS3, even if I already have CS2 open. If I have CS2 open, the system just starts opening CS3.
Worse yet, upon installing CS3, all of my CS2 files were CHANGED to CS3 files (looking under "kind" in the "info" windows.
I had thought I could just change all INDD files to asssociate with CS2, but when I go to "Get Info" on a file (CS2 or 3, doesn't matter which), and change the "Open with" to CS2, and hit "Change All", the "Open With" Just changes right back to CS3. Augh.
For now, I just use the "Open" dialogue in CS2 or drag and drop the files. Pain in the rear. So I thought I'd post here.
And though I don't want this to be a discussion of whether CS3 is buggy or not, I'll just say that my system was plagued by the CS3/Leopard NavSvcs and Hide bugs, (only a problem in Mac OS 10.5), both of which have been recognized by Apple and Adobe, as well as thoroughly blogged about by Tim Cole and MacFixit, and countless others.
My favorite is this from the InDesign 5.0.2 Readme file:
This update does not address recently identified issues running Adobe InDesign CS3 on Mac OS
X Leopard (v10.5.1). Known issues include the following:
Users are unable to hide InDesign CS3 using the cmd+h keyboard shortcut.
InDesign CS3 may unexpectedly quit when using the Place, Save, Save As or Export
commands using either the OS or Adobe dialog boxes.
Unfortunately, there are no workarounds for these known issues.
Yes, that's right. I'm one of those lucky folks who's experiencing the known bug where InDesign CS3 crashes when you try to open or save a file. I'm not a troll, I just simply can't use it! Haha.
http://creativebits.org/leopard_vs_indesign_crashes_on_open_import_export_save_and_print
http://blogs.adobe.com/indesignchannel/2008/02/indesign_leopard_update_vii.html
http://discussions.apple.com/thread.jspa?threadID=1484712&tstart=6

Can't find project files after upgrade to version 3.0

I upgraded Aperture from 2.0 to 3.x and I can no longer find my project files in the Aperture folder?
All is working fine, I just want to copy the project files and they are not visible in finder.
any ideas

I misunderstood your question. As you were referring to the Aperture folder and locating things in the finder I thought you were trying to find the image files external to Aperture.
As for info on the structure of the library, from within Aperture take a look at the user manual: http://documentation.apple.com/en/aperture/ this is the online version its the same as what you get when you go to Help in Aperture. Pay particular attention to the first section which describes the various parts of the library and how it all goes together.
As for rating answers, if the thread is yours and you are logged in then eash seperate post should show this
at the bottom. Select the rating you want to give to the post. Remember only one post can be correct up to two can be helpful.
regards
Not sure what you mean by maintain files in a "creation date" format? If you describe what you are looking for then I'm sure someone will chime in.

Can I move project files between a mac and a pc?

I have a PC desktop, which I run Adobe Premiere CS4 and work mainly on. I am looking into buying a mac book pro to use in the field and for some work while traveling. I was wondering if I could start a project at home (I work on Firewire Portable Drives) then open it in the mac version then back to the PC when I get home? Or even the other way around... I just want to go back and forth between the machines seemlessly.
Thanks!

Other than the physical external formatting, you might want to plan your Assets, so that you have the greatest compatibility between the two platforms, also. Some .MOV CODEC's can cause PrPro problems on the PC side of the street, though in general I have few problems with the ones that I get from most Macs. Same can be true for .AVI's on the Mac side.
I've swapped Projects from Mac's to my PC with no issues to date. Only hangup was the FAT-32 format for the external, because of the Mac compatibility (what Curt pointed out). File sizes have to be kept down due to that. Do not know if the newer Mac OS's can read NTSF, but I do not think so. To overcome this, you should be able to get MacDrive for the PC and use a more efficient formatting than FAT-32. I'd check into this, as a 4GB file limit comes up quickly.
In my case, I just plugged the Mac's external and copied the whole Project & media, to my 2TB NTSF externals and didn't have any problems. Never even needed MacDrive.
Good luck,
Hunt

Select project file (to open editor), Run Script - XCode Organizer

Hi,
I'm new to AppleScript, but I'm trying to automate a number of login processes. I have most of my needs worked out, but there are still a couple of loose ends which will save me substantial time if I can get them running. I'm not finding documentation of such processes, so maybe I'm barking up an empty tree. Is this possible; and were can I find the necessary documentation:
1.
I have a Ruby project maintained in the XCode Organizer. I'm striking out on blind tries. What I need to do is equivalent to selecting a document *in the organizer*. It has to have the same effect as manually negotiating the file/directory tree, because selection of the file further enables running an Action Script in the Organizer, the name of which is "START MONGREL SERVER."
I have opened the target document, application_controller.rb, in the conventional manner you might open a document, but this has only opened the document in a separate editor window. This doesn't suffice, because it is the selection of a project document which makes the related Action Script available for further running.
How then might I do this?
2.
After this file is selected, I need to run the action script, "START MONGREL SERVER." How likewise can I do this?
3.
Thirdly, is it possible to wait until threads invoked by previous script statements are finished? If so, how? Otherwise, can we insert a "wait" statement of some kind to delay execution of further instructions? If so, how?
Much thanks in advance,
m

Hi,
ODP doesnt have anything built in to run sql scripts. You'd likely need to parse the script yourself and execute the commands one by one, or you could shell out and run the script via sqlplus.
Hope it helps,
Greg

Can Captivate 4 project files be opened in Captivate 5?

Similar Messages

Maybe you are looking for