Can Captivate be set to advance when only a certain key is pressed

I am doing software training simulation.  I am trying to teach the user how to do a set of tasks.  In the software you must press certain key to accomplish certain steps so  I want to set captivate to advance to the next slide only when the correct key is pressed such as the delete key. I am fairly new with captivate. Is this possible? Will I need an advanced action to do this?  Thanks

Each interactive object, like a Click box, can be assigned a shortcut key. If you are capturing the software training simulation (Automatic), those click boxes are created for you. In the Properties panel of the Click box you can assign the shortcut key. Normally you do not need an advanced action for that. And be sure to give Infinite Attempts if the user can only proceed when that shortcut key is pressed (but avoid frustration, maybe with the Hint caption?)
Lilybiri

Similar Messages

  • I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  Now the cursor moves but cannot select anything.  Suggestions?

    I have a 27" desktop mac running with OSX 10.6.8.  The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing.  When opening up a browser or application, the cursor moves but cannot select anything.  Suggestions?

    Maybe something in these Apple support articles will help.
    Keyboard Doesn’t Work
    Keyboard Keys Do Not Respond
    Keyboard/Mouse – Troubleshooting Wireless

  • Can we control order of cycling when use same access key in multiple locations

    Hi,
    I'm using Jdev 11.1.1.6, IE 9, Firefox 24.0.
    I have created simple jspx page having two buttons, named Add and Close. Close button has got access key as C. When click on Add button I'm calling a <af:popup> and that popup contains two buttons Submit and Cancel. Cancel button has got access key as C. Basically in one jspx file I have got two button using same access key. At runtime those buttons will display one in page and one in popup. 
    In IE: it works fine. When I do access key on popup it will close down the popup.
    In Firefox: it will first focus to the button on the page. When I access the same key for the second time it will set the focus to button on popup and will not execute the action.
    If I'm using different letters it will perform the action in firefox and IE both. In my requirement I need to use the same letter.
    I read in oracle documentation "If the same accessKey appears in multiple locations in the same page of output, the rendering user agent will cycle among the elements accessed by the similar keys.". So it seems to be an expected behaviour.
    My question is: Can we control the order of cycling. i.e. If we do access key on popup, can we first focus on the button in popup instead of button on the page in firefox.?
    Greatly appreciate your ideas.
    Thanks.

    Hi,
    unfortunately yes, the cycling behavior is up to the browser.
    Frank

  • Can i tell adobe bridge to look only in certain folders?

    I don't want or need Adobe Bridge looking through my entire computer for stills. Is there a way to tell Bridge CC to look only in certain folders.
    Let's say that I have a folder called "stills" that is part of a documentary film media folder. I just want Adobe Bridge looking for stills in that one folder and nowhere else. Is it possible to get Bridge searching only in that folder?

    Yes, first navigate to the desired folder. Then add this folder as a favorite
    This are my favorites:
    Then you simply click one of your favorites and Bridge will only show its content

  • All rows in a Set get updated when only one row changes

    I have a complex object, which contains a Set of child objects. If i modify one of the child objects and put the object back in the cache, coherence will issue a sql update for each of the child objects, even though only one changed.
    I'm using hibernate, and when i do this in straight hibernate, that doesn't happen, only one sql update gets issued for the row in question.
    I found this because i have a timestamp column that automatically updates when the row gets updated, but since all the child rows are updating, this timestamp gets updated as well which breaks the biz logic.
    Am i missing something? Clearly it's inefficient to issue updates on all the child rows when just one changes. Is there some way to avoid this?
    Using coherence 3.5.3.
    Thanks.

    This turned out to be an issue with POF serialization of a Date object. It was doing it incorrectly, it would get the day correct, but the HH:MM:SS would be set to the current time. Since the object had been changed, when i persisted the parent, all of the child rows would persist as well since their "modify_date" attribute had been changed. Eg, if the date in the DB was "2010-07-14 03:10:00" when i read the object in, the value would change to "2010-07-14 HH:MM:SS" where HH:MM:SS would be set to the current hours/mins/secs.
    I changed the code to use my own serialization of a Date object (just used the long) and things worked fine after that.
    Is this a known issue with pof serialization?

  • I want to set up Firefox to only allow certain pages to load - how do I do this?

    My children are having my old laptop and I dont want them to be able to 'stumble' across anything unsuitable.
    How can I set up Firefox so that it only allows pages to load from websites I choose?
    Thanx!

    See:
    * https://support.mozilla.com/kb/Parental+controls
    * http://kb.mozillazine.org/Parental_controls

  • Xorg shutting down when certain keys are pressed

    Hello after some recent updates, I've experienced that xserver is shutting down and I need to restart my computer to get a working a system back.
    When I hold keys like backspace arrow keys this happens, anyone experienced the same lately?

    (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device G15 Keyboard G15 Keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Gaming Keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Gaming Keyboard
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Logitech USB Gaming Mouse
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (EE) config/hal: NewInputDeviceRequest failed (8)
    I have disabled the hotplugging in my config.

  • Can GPS be set to use on ipad 3 when not online?

    New to ipad, can GPS be set to use when on the road , ie not online?

    Welcome to the Apple Support Communities
    GPS only works offline when you have a Wi-Fi + Cellular iPad. If you don't have one, you will have to buy a peripheral to use GPS function and the map from the App Store, for example, from TomTom

  • How can I make slides NOT advance automatically?

    I'm building a project manually by making new slides and putting graphics and text on them.  It's not a recording of software.  I would like the user to read each slide for as long as they want to, then click to go to the next one.  I can't find a setting for this.
    I tried setting the default slide duration to 300 sec.  Which sort of works, but every element I add to a slide still defaults to 3 sec so I have to change each element seperately.  Not practical at all.  ideas?

    Hi, I'm also having a slide advancing problem using CP8. I have three smart shapes used as buttons on the screen. After each is clicked, a prompt to click Next (in the playbar) shows. I have a click box after the prompt to stop the screen from advancing. This works fine if I only click the items once. If I click them again, the screen advances.
    I tried adding an additional smart shape. If I clicked two of the items again, the screen advances.
    I need a slight delay before the prompt shows and an effect on the prompt, so I can't just set the Advanced Actions to pause.
    Here are some screen caps of my course...
    Slide properties and Timeline
    Advanced actions of smart shapes....
    Properties for Click Box and Smart Shape that "pause" the slide
    Any help would be greatly appreciated. I need to send this out ASAP.

  • Clear IDOC creation when only header level changes are made ME22N.

    Hi All,
    when the PO is  on changed in the header level only(for example header texts and header code)  and when we execute RSNAST00 one BADI getts triggered which checks if the Item category is 9 and  badi will clear the IDOC creation.
      If the PO item category is = 9, the IDOC must not be created. This badi works fine if the changes are made at
    1)at Item level
    2)both header level and Item level
    In case of 1 and 2 we have both header segment E1EDK01 and item segments E1EDP01.As a result it checks for the item category in the item segment.so idoc is not created.
    3)BADI is not working when the changes are made at the header level only. The IDOC is getting created even though the PO has the item category as 9.
    I found in this case only header segments are availble while debugging and the item segments are not there to check the condition for the item category.
    Please any one can suggest me possible solutions to  clear idoc creation when only header level changes are made ME22N.
    The BADI used is as below.
      DATA : lwa_data TYPE edidd.
      DATA : lw_dp01 TYPE e1edp01.
      DATA : lwa_control TYPE edidc.
      CHECK idoc_control-rcvprn = '3PL' AND idoc_control-idoctp = 'ORDERS05'.
      LOOP AT idoc_data INTO lwa_data.
        IF lwa_data-segnam = 'E1EDP01'.
          lw_dp01 = lwa_data-sdata.
          IF lw_dp01-pstyp = '9'.
            CLEAR create_idoc.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDMETHO
    Thanks in advance.

    Hi all,
    Is there  any way that I can get the item category details when Only header level changes are made to the PO in ME22N and only header segments are available in the IDOC.
    Is this possible:- Fetch the po number and item category details from ekpo table that matches with  the header segment po number and then check for item category value  to clear the idoc creation?
    Any information is helpfull.
    Edited by: Selina.selk on Nov 20, 2009 1:39 PM
    Edited by: Selina.selk on Nov 20, 2009 2:49 PM

  • When I turn on my MacBook pro, I get the 'macintosh he's symbol. Then, at my login, certain keys (I,e,u) get an error sound, and I can't log in. Anyone know what's up?

    Oh, I'm on my phone because if the problem, so I put the whole question in the title. But, the  problem is that my computer acts like I've got the alt key down   I start up, and gives me an error sound when I hit certain keys (e i, u, and a few othes) so I can't log in. Help?

    You showed a kernel panic file from OS X, apprantly Log Me In is installed into OS X or running when you log in.
    You should be using the developers installer/unistaller to remove Log Me In from OS X.
    Somehow it's in OS X, I don't know, but it's there and you need to remove it. I'm not dealing with Windows, just OS X.
    Talk to Log Me In people and find out what is installed where so you can do a manual deletion out of OS X.
    If that doesn't work, you have to reboot holding the Shift key down manually search for any Log Me In or Himachi files on your computer, in your System/Library/Extensions folder too, use the free Easy Find.
    https://s3.amazonaws.com/DTWebsiteSupport/download/freeware/easyfind/4.9/EasyFin d.app.zip

  • 206 unable to set alert only for certain group

    Hi,
    is it a symbian unwanted feature that user is unable to set Nokia 206
    profile to alert for certain group (even though this kind of functionality is
    available on this phone)?
    To be more precise user is able to set profile to alert only for certain
    group but this setting has no effect (phone rebooted, groups recreated, etc. no effect)
    This feature has been available and workin in previous Nokia phones
    since last decace - is it a software quality issue or what.
    Best regards,
    Hez

    It is the Application Pool account making the query to retrieve the groups, so you would need to establish a trust from Domain B -> A.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Frame dropping when Chinese Pinyin-10 key Keyboard pops up

    Almost all the Apps are effected by this issue in iOS 8.1, even you creating a new message can cause this noticable frame drop when Chinese Pinyin-10 key keyboard pops up.
    Note that:
    (1) This issue never occurs in iOS 7.1.X, 8.0 and 8.02, and full QWERTY keyboard is fine.
    (2) If turn on Settings->Accessibility->Increase Contrast->Reduce Transparency,  Chinese Pinyin-10 key Keyboard also works fine.
    I have to use full keyboard instead now. Please fix this.

    Kurtis614 wrote:
    I bought my device from China-Unicom.
    Thanks, I was curious because I think only devices bought in china have the Chinese Pinyin 10 keyboard, it is missing for everyone else.

  • Only show certain fields after a date has passed

    How would I set a recordset to only show certain fields after
    a date has
    passed?
    For example:
    I have a list of classified adverts some which include an
    image which the
    client pays extra for. After a certain time period, say, 1
    year,
    would it be possible to use some kind of IF statement (or
    something) to no
    longer show the image?
    Thanks
    Gary

    scrap that entire post man.
    I'll rewrite it here in a few.
    "crash" <[email protected]> wrote in message
    news:[email protected]...
    >
    OK. I can't be as much help as I was hoping, since I
    just did this in
    > PHP and MySQL. But we can do a bit. My ASP is rusty
    enough I'm just going
    > to give you what I think you should do.
    >
    > You'll need to research how to format dates and most
    importantly strip
    > away the timestamp. In MySQL, you can format the date as
    it comes out of
    > the recordset. I'm not sure if you can do this in
    access, but I would
    > imagine that you can (indeed, it might be the same SQL).
    >
    > <%
    > varToday = Date (should be able to format out timesteamp
    here);
    > varTerm = 365; 'This will be your constant term, defined
    in days, it looks
    > like from archived posts
    >
    > varExpiredDate = varToday = varTerm;
    >
    > Search your recordset via varTerm. ie
    > WHERE datefield < <% varTerm %>
    >
    > You will need to search date formatting in Access to see
    how to strip out
    > the Timestamp from your date, but you should be able to
    do this from your
    > SQL statement, and return just the date, this will be
    compared to your
    > varTerm, which basically states that if your signup date
    is beyond a year
    > from today, your ad will need to be renewed.
    >
    > I"m not very happy with this, but it's all my brain is
    coming up with
    > right now. Gimme a few to review it and I might have
    something more for
    > you.
    >
    > HTH, sorry I couldn't give you code or urls for date
    formatting.
    >
    > Additionally, you will eventually need to build
    somethign that checks
    > images and and dates and then sends an email to your
    customer letting them
    > know their term has expired.
    >
    > OR - You could also add a new field to your database
    which automatically
    > updates an "expire" time in your ad table which
    automatically adds days to
    > the time. If you do this, you don't have to worry about
    stripping
    > timestamps or anyting, and you can just do a simple
    lookup for if Date >=
    > DateExpireField then don't pull image.
    >
    >
    >

  • Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

    Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

    If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

Maybe you are looking for