Can CC subscribers install LR CC for evaluation and keep LR5.7 for production use?

I'd like to evaluate LR CC, but have plugins that aren't yet compatible with it. Therefore, I want to keep LR5.7 for production use. Is this possible?

Yes, LR 6 will convert (by making a copy) your catalog, and you can then edit in the new version.  You must take some caution, e.g. in operations that change your actual images (such as writing metadata or moving images around). 
The safest thing would be to NOT convert your catalog but rather build a whole separate work area of images and catalog that is disposable, but it is certainly possible to test LR6 in place if you are careful and aware of what operations you take.
Note you can run LR 5.7.1 and LR 6 (aka CC) from Creative Cloud at the same time as well -- you can even go back and install prior versions from the CC app.

Similar Messages

  • Can you get an Apple ID for corporate use to associate with more than 10 devices?

    Can you get an Apple ID for corporate use to associate with more than 10 devices?

    I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
    Regards.

  • Can I un-install Yosemite from my iMac and re-install Mountain Lion?

    Can I un-install Yosemite from my iMac and re-install Mountain Lion?

    Sorry to barge in like this but is it because you found it to have it's own way of doing stuff without your control? As i was thinking of doing the same thing because i found Mountain Lion much more user friendly.I know you came for an answer just was searching and came accross your question.
    Hope you find the answer. good luck.

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • HavI e Photoshop cs6 Extended Student and Teacher Edition/ can it be installed on two pc's and will it work with Windows 8.1

    havI e Photoshop cs6 Extended Student and Teacher Edition/ can it be installed on two pc's and will it work with Windows 8.1

    Yes

  • How i can take all record that start for Epi using a select?

    How i can take all record that start for Epi using a select?
    exemple
    select objnr from jest where objnr = 'Epi*'  -
    so don't go

    Is case important? Can it be "EPI"?
    I think case is important, so do it like Shakir showed you, but put it in upper case.
    Rob
    Message was edited by:
            Rob Burbank

  • I have a license for Indesign CC for one month and my laptop just broke, Can I download it again to my PC and keep the license for the rest of the month?

    Hi all,
    I have a job to do and the laptop that my boss provided me is giving a lot of problems...I really need to change to my PC and finish the job. I don´t know if i can download again the license from creative cloud and keep on working there.
    Any suggestions?
    thanks a lot!

    Yes.
    Mylenium

  • Can you activate an iphone with one sim, and than once it is activated use it with another sim?

    can you activate an iphone with one sim, and than once it is activated use it with another sim?

    It could be the activation server is unavailable right now, however have you or anyone else ever used that computer to jailbreak or hack another phone? That can have an affect on the hosts file. You can check this regarding information on the hosts file or security software problems.
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3014
    This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

  • BIOS Update for nVidia GTX 550 Ti? I have a BIOS "not for production use"

    Hi,
    I bought a new computer about a month ago, and it all works well, but every now and then, the whole system freezes completely for 2-4 minutes, and then afterwards resumes where it was. This is extremely annoying, and it really could be anything, I don't have evidence that it's the video card, but I'm trying to get everything updated to the latest version.
    When my computer boots up, I see this message:
    GF116 P1050 SKU 0 VGA BIOS
    MSIMV261MS.105Version 70.26.20.00.00
    Engineering Release - Not for Production Use
    Build Date: 02/23/11
    Revision Date: 02/16/11
    Copyright © 1996-2011 NVIDIA Corp.
    So, evidently this BIOS is wrong, and i'm trying to update it, but I can't find where to download an update.
    Could you please point me in the right direction?
    Thank you
    Daniel Magliola

    Quote from: dmagliola on 07-May-11, 21:59:57
    When my computer boots up, I see this message:
    GF116 P1050 SKU 0 VGA BIOS
    MSIMV261MS.105Version 70.26.20.00.00
    Engineering Release - Not for Production Use
    Build Date: 02/23/11
    Revision Date: 02/16/11
    Copyright © 1996-2011 NVIDIA Corp.
    I noticed the same thing... BUT I made 2 mistakes:
    Failed to make a copy of this BIOS using GPU-Z
    Updated to 1.06 via MSI Update 5 (26110.rom)
    Then I read the posts on this subforum and realized my mistakes.
    I'm just in the initial stages of installing software on this machine, so I haven't noticed any problems.
    I saved the updated BIOS via GPU-Z and compared the hashes against the 1.06 BIOS offered by MSI on their page for this card (NV261MS.106) ==> they matched  MD5: 52ECDDEFAEA86E745C09FF8A43541078
    Afterburner 2.1.0 gives the following info:
    Quote
    Display device       : GeForce GTX 550 Ti on GF116 GPU
    Display driver       : ForceWare 266.71
    BIOS                 : 70.26.20.00.00
    GUID                 : VEN_10DE&DEV_1244&SUBSYS_26101462&REV_A1&BUS_1&DEV_0&FN_0
    My question is how badly did I mess up and what should I do now?
    Thanks in advance.

  • I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
    directly for serial number issues.

  • Web Service Developer Pack for production use?

    Hello,
    Can anyone tell me what the licensing is for use of the web services developer pack reference implementations? Can they be used in a production environment, or are they for development purposes only?
    Any information is appreciated.
    Holly

    The JWSDP can be used for production use. It is not just
    a reference implementation. The exception is the bundled
    UDDI registry which is just for testing development.

  • Recommendation of use for MaxDB for production use and Oracle comparison

    Hi all,
    We are about to propose to a customer of ours the use of SAPDB for production use. This would be a good way to reduce license costs.
    Previous use of this DB platform has shown that it is mature, but since I am not a basis or DBA, I can't really pinpoint if we miss a lot of functionality.
    Who could provide some info on the following:
    1 - Are there major functionalities that Oracle provides that MaxDB doesn't?
    2 - Customer reference (or your inputs) on success stories.
    Thanks in advance.
    Leonardo

    > Who could provide some info on the following:
    >
    > 1 - Are there major functionalities that Oracle provides that MaxDB doesn't?
    I would ask:"What functionalities do you expect from a database system?" - and then "Can MaxDB provide those functionalities?". It does not makes sense, IMHO, to compare "possible" things if you never need them.
    > 2 - Customer reference (or your inputs) on success stories.
    We run MaxDB (former ADABAS D, former SAPDB) for 12 years now on all our systems. Our main ERP 6.0 EHP4 has a size of 3 TB, we run on Linux serving about 900 users (700 concurrent), a BI with roughly 1 TB (with BWA), CRM with 600 GB, and tons of portals and smaller systems (SRM, SRM-MDM 7.1, GTS 7.2, SolMan,  PLM (cProjects), Content Servers and more).
    There are, as with every database, "performance problems" in special areas but generally our response times are below 500 ms on the main ERP.
    One drawback of the MaxDB is the fact, that it does not use UTF-8/CESU-8 to store the data (yet) so if you use only single byte codepages in a Unicode system, you will neverless consume the full 2-byte space per character.
    Basically I think that you can run roughly 98 % of the current systems on MaxDB without any impacts.
    Markus

  • How do you remove this: META NAME="ColdFusionMXEdition" CONTENT="ColdFusion   DevNet Edition - Not for Production Use."

    Hi,
    How do you remove this: <META NAME="ColdFusionMXEdition"
    CONTENT="ColdFusion DevNet Edition - Not for Production
    Use."> since it
    automatically generates in my code when i run the application
    and it
    generates an error in the page.

    Deinstall the devnet version, and install the proper version.
    Adam

  • Is sql as a language free for production use ?

    is sql and pl/sql as a languages free for production use ?
    and if you wanna help me , tell me about programming languages in general ?
    thanks in advance

    semsem wrote:
    is sql and pl/sql as a languages free for production use ?The questions don't make sense. What is important is whether the database allows production use, not the language.
    First, SQL is a standard. Every database vendor implements their own, slightly different, SQL dialect. Whether SQL is free depends on what database you're referring to and how that database is licensed. There are tons of open source databases (i.e. MySQL, PostgreSQL, etc) that support a dialect of SQL and can be used in production at no cost. If you are talking about Oracle, it depends on the edition of the database and the terms of the license. If you have the express edition (Oracle XE), you can use that database's SQL engine in production at no cost.
    PL/SQL is Oracle's procedural extensions to SQL. As with SQL, though, what is important is how the database that implements the PL/SQL VM is licensed. That, in turn, depends on the edition of the database just like it does for SQL. If you have the express edition (Oracle XE), you can use that database's PL/SQL engine in production at no cost.
    and if you wanna help me , tell me about programming languages in general ?Here, it's even less clear what you're asking.
    Most languages are free to use. Many languages or deployment scenarios, however, require you to license something else in order to actually run code written in that language. You can, for example, write and use a .Net application free of charge. But since your application relies on the .Net libraries that come with Windows, you would need to license Windows on the machine you are running the application (or run a Linux box with Mono and hope that everything you need from the CLR has been ported). You can find free JVMs to run Java applications on most platforms. But if you want to run a Java stored procedure inside Oracle, you'd need to license Oracle. If you want to run a Java object on a JEE app server, you'll need a JEE app server (many of which require you to obtain a license for commercial deployments).
    Justin

  • [NX6200AX-TD128] Firmware: engineering release not for production use

    Hi,
    i just got my MSI NX6200AX-TD128 (602-V011-010) card
    B0505000867
    and it shows this bootup firmware info:
    BIOS 5.44.A2.02.00 engineering release not for production use
    Why is MSI selling these cards with a firmware like this?
    Why there is no updated firmware for download?
    (searched here: http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=679&kind=2 )
    Where can i download a retail fw?
    TIA
    TIA

    Quote from: fabianzd on 07-August-05, 20:58:50
    This is a user to user forum and MSI does not read or participate in these forums.
    You need to contact MSI directly to get answers about this BIOS...
    I see... thank you.
    Quote from: fabianzd on 07-August-05, 20:58:50
    But... why overclock a 6200 video card??? I really doubt that you get a better performance in games or 3D app's with this video card.
    Quote from: Richard on 07-August-05, 22:20:30
    Trying to overclock a 6200 is like trying to Supe up a Yugo. What is the point, there is nothing you could do to it, to make it play today's games.
    Take Care,
    Richard
    here are some articles about overclocking the 6200:
    6200 (NV43):
    http://www.digital-daily.com/video/peredelki/
    A6200 (NV44A):
    http://www.digital-daily.com/video/nv-gf6200agp-roundup/
    too bad that i found these articles after i spent my money.
    next time i'll do some research before buying and not after... :P
    later.

Maybe you are looking for

  • Inserting FLV in Dreamweaver CS4

    I inserted an FLV file using the Progressive Download Video option. After completing everything from the dialogue window I clicked OK. When I previewed the file both Fire Fox & IE it only showedthe image below. I have done it before and it worked, bu

  • Cross Domain XML not working

    Greetings, I recently obtained two different domains that point to a subdirectory of another domain server. The swf file I created does not show up when I use the domains that are pointing to the subdirectory of the original domain. I placed an xml f

  • IPad or Mac? which is better worth the money?

    iPad or Mac? which one is better worth the money, if mac, which is the cheapest but still gives you all the good apps and qualities? I would use it alot, and i already have an iouch so would the ipad be worth it? im a teenager so i would use these th

  • How to Display Sub-Columns using ALV Grid

    Hi ,   Could someone tell me how to display sub-columns under a parent column using ALV Grid. Do we have any standard Program which has this scenario. Please let me know. Thanks, Abaper. Message was edited by:         ABAP'er

  • Whys does Messages app freeze in Mountain Lion?

    Whenvever I click the app it take really long to respond and whenever I write a message and press Return the rainbow wheel shows up and it take a good minute or so to respond again. It also shows the rainbow wheel after recieveing messages. This is v