Can CDMA and GSM work at the some time on iPhone 4s

I am currently using two phones right now (work/personal). I was thinking about getting Sprint CDMA(iphone4s) for one line and using its unlocked GSM for the other line! so that I don't have to carry 2 phones all the time. Do you guys think it will work???

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Similar Messages

Can keyboardEvent and mouseEvent work in the same .swf file?

I'm nowhere near an expert on Flash or action script, so this is probably a simple thing to solve. But so far I haven't figured it out.
I put together a rather simple interactive .swf file using graphical "buttons" to navigate through different screens. Afterwards, I was told to add in two keyboard events as well: one to navigate to the next screen and one to restart the .swf file.
Using the keyboard to navigate the way I explained above works fine--that is, until I use the mouse to click on a button. Once I do that, the keyboard events no longer work. For example, if I start off the .swf file by pressing the Space bar on the keyboard to navigate to another page, it works fine. If I then press the "R" key on the keyboard to restart the .swf file, that works fine as well.
However, the first time I click on one of the buttons on the stage to navigate to another screen, the keyboard events no longer work. I can press the Space bar, and nothing. I can press the "R" key to restart the .swf file, and nothing. It's as if using a mouse event disabled the keyboard events or made the .swf file stop "listening" for keyboard events. The only way I can get the keyboard events to work again is by clicking somewhere on the stage and THEN pressing the appropriate keyboard key. I'm guessing that's because I put the focus back on the stage, maybe?? (again, not an expert here)
My code is ridiculously simple, and it's on the first frame:
stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
function onKey(event:KeyboardEvent):void
    if (event.keyCode == Keyboard.SPACE)
        gotoAndPlay(currentFrame + 1);
     if (event.keyCode == 82)
        gotoAndPlay(1);
Is there anything I need to do to this to make sure the .swf file is always "listening" and registering the keyboard events?
Thanks..

use:
trace("defined");
stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey);
function onKey(event:KeyboardEvent):void
trace(event);
    if (event.keyCode == Keyboard.SPACE)
        gotoAndPlay(currentFrame + 1);
     if (event.keyCode == 82)
        gotoAndPlay(1);
test by clicking one of your buttons and watching the output panel for "defined". if you don't see that, you're not defining a keyboard listener when that button is clicked. if you do see it, then click a keyboard key. (if you're testing in the flash test environment make sure you disable keyboard shortcuts.)   if you fail to see the keyboardevent trace, you're removing or disabling your listener after it's defined.

Can 2 while loops work at the same time?

I have two while loops in my program; one reads data and the other does nothing until I hit stop on the first one. I want the first one to always run and the second to run off of the time constraint I have for it when I hit the start button. I am using a DAQ and transfering data from one while loop to the other. See attached file.
Main questions:
How to attach the start button?
How to get the second loop to work with the first?
Thank you
Solved!
Go to Solution.
Attachments:
2whlloopprgrm.vi ‏299 KB

Your problem is that the loops have a data dependency. If you want to run both loops at the same time, they can't have any wires running from one to the other. Look into the Producer/Consumer architecture. It uses queues to send data from one loop to the other.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can EJB and BC exist at the same time in one project?

having to use ADF's BC and EJB to access data in both way due to the special requirements, but I am always getting the deployment failure.
can Ejbs and BC components exist at the same time in one project?

thanks for your reply.
I considered to separate the BC and EJB as the separate project. I just use the EJB component to implement the dynamic tree menu, whether a little make a mountain out of a molehill if you as a separate project.

My IPod Touch 4th gen won't charge unless its off when it's on it won't even recognize the charger or indicate it's charging please help me figure out so I can charge and use it at the same time

Help would be appreciated

The charger yo are using does not supply enough power to both charge the iPod and power a working iPod at the same times.
Not the wall you plug the wall charger into if you are using a wall charger.
Have you tried another charging source?
I would also try another cable.
Further
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

Multiclip working and not working at the same time... not making edits

I sync'd and loaded my muliclips and it started off just fine, then i had to pause it while for a second, then i went back to it and it looked like it was running fine it was putting the blue marks in the timeline and my record monitor was switching fine. when i finished i clicked on the timeline and it didnt make the edits after i paused it. So the first half worked and the second half didnt, the blue marker points are still there. what could i have done wrong and is there anyway to put those edits in without redoing the whole clip over again?

Have you loaded the multiclip button bars?...Tools/Button Bars/Multiclip.
Exactly how are you working the multiclip...Buttons?, clicking in the viewer?
It sounds like you are 'switching' the shots and not 'cutting' them. If this is the case, then you'll need to re-edit the cuts you thought you were making.
As a general rule, I'll only go several 'cuts' at a time, then stop the playhead, let them activate, then carry on. The more cuts you do without stopping, the more you will lose, if you decide you want to make changes.
K

For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. This is a brand new computer (Win7) and FF just loaded about 3 hours ago.

# Question
For some reason, I can not delete bookmarks. I did one at a time, then tried 5 or 6 and it worked once then no more. I then tried 1 at a time and it worked once the no more. Why is this happening? This is a brand new computer (Win7) and FF just loaded about 3 hours ago. Do not know how the bookmarks even got in there. Some were ok, but no order and some that were never bookmarks. Looks like FF tried to import some BM's from the Virtual XP installed, but did not get it any where near right. I need to completely delete all of them and install from a saved .html file.

Well, I did not see the exact problem that I was having listed in the articles, BUT the problem is solved for now.
I opened FF and the Bookmarks to Organize again. I deleted all of the folders and entries, ONE AT A TIME, AND IT WORKED. Evidently, for what ever reason, FF did not like "Batch" deletes of ANY amount greater than 1 and the HANG UP would occur.
Deleting one at a time then importing the good .html from a good file, loaded the wanted Bookmarks. Yea

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

My ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Can i use cdma for internet and gsm for phone at a time in Iphone4s?

Can i use cdma for internet and gsm for phone at a time in Iphone4s?

No. Phones sold by GSM carriers can't access CDMA at all and phones sold by CDMA carriers can only access GSM if they are a) unlocked and b) in an area where there is not CDMA.
Best of luck.

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

HT4111 can headset and bluetooth speaker work at the same time?

On my iPad, can the headset option and a bluetooth speaker work at the same time? I am using the headset to listen to music, but I want my spouse to be able to hear the same music using a wireless bluetooth speaker in the other room.

Sorry, of course I tried it and it did not work!
To clarify, can it be MADE to work? The basic hook up does not seem to allow for both. I was hoping an intellengent, helpful person might be able to assist a novice.

Can oracle work in shared and dedicated mode at the same time?

Hi All,
can oracle work in shared and dedicated mode at the same time?
Thanks

A database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M-

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Can CDMA and GSM work at the some time on iPhone 4s

Similar Messages

Maybe you are looking for