Can Chapters be Assigned to Buttons Automatically?

I shoot and edit weddings. All my Encore projects are very similar but I can't seem to create an Encore template with the same menus and titles. But is there a way to have Encore detect the chapters that I have already set on the timeline and automatically assign them to all the buttons. After all, the menus are named cronologically from 1-4 (or 5) and all the buttons are in order, but I have select each button and assign a chapter to it which is time consuming.

Stanley,
You beat me to it. I was off checking the official name of that process. As you state, it is limited, and I have seldom had need to use it.
I just name everything appropriately, and can quickly do the links manually. Still, it might work in this case.
Thanks,
Hunt

Similar Messages

  • How can I make the Homepage Button automatically lauch the Homepage in a new tab?

    I have Firefox 22.0 installed, I recently did a reset and now have lost the ability I had to click on the homepage button and automatically launch the Homepage in a new tab? I like this option since when I click on my homepage it doesn't override my current page. I know you can configure new tabs to open the homepage automatically ; and that you can use the Ctr+Homepage Button to open the home page in a new tab. However I would like to know what setting I can add/change to restore this missing feature.
    Thanks

    Open a new tab. In the address bar type; '''''About:Config''''' and press
    enter. If you get a page that warns you about continuing, press the
    '''''I will be careful''''' button. In the search bar, type; '''''Newtab'''''.
    Look for; '''''Browser.newtab.url'''''. Right click and select '''''Modify'''''.
    Type; '''''About:home''''' (or what ever page you want) and press
    enter. That should do it.
    .

  • Value can not be assigned automatically  to Characteristics in Pro. Order

    Hi All,
        I am working on PP-PI scenario. I am getting one error during creation of Control recipe in Process order.
    Error is
    Value can not be assigned automatically to char XX in Process Instruction IN_AA phase BB
    I have checked the settings of Characteristics XX in T code O27C but it is OK.
    Thanks,
    Shailendra
    Edited by: Shailendra Hadkar on Feb 14, 2008 4:14 PM

    Dear,
    Can you tell me what is the chaerecteristics you are using?
    This message comes when it is  a variable and is assigned during CR creation.

  • How can I make music (mp3) play automatically in one Scene (NO buttons)?

    How can I make an mp3 play automatically in one Scene (NO buttons)? I have been searching the net for answers for over 10 hours with no answer... My movie will not be for the web, it needs to be portable (CD or flash drive)...
    PLEASE HELP!!!!!!!
    thank you!

    You just need to look in Help for the Sound class and possibly SoundChannel... if you have an MP3 in your library - right click it, and go to properties. Set the sound to export for ActionScript - and give it a class name - mySound will work. Then you can make it play with something as simple as:
    var a:SoundChannel = new mySound().play();

  • Can I use a submit button that will automatically flatten and open up the save as screen?

    Hello,
    I'm working with forms in Adobe Acrobat Pro 9 and I want the submit button to flatten the document then open the save as screen.  I know I can print to pdf and this automatically will open that screen, but these forms are going to be used with tablets that may or may not have the "print to adobe" as an option.  Is there another way to flatten?  I know the PDF Optimizer will do that too, but it isn't an executable option in the button properties.  Magic anyone?  Thanks.

    It depends very much on the platform and the applications used by the users of this form. If they are using non-Adobe software, all bets are off.
    Also, some tablets (iPad) don't support JS, so even if they do use Adobe's Reader for the iOS, there's not much that can be done in the way of scripting.
    Generally speaking: In Acrobat you can flatten the form, but in Reader that's not possible. What you can do, though, is create a function that makes the form fields read-only, thus preventing the user from editing them after having submitted the file.

  • Assigning the role automatically when a user is created.

    Hi all,
    we are usign the EP 7.0 eph1 sp6 . we have a requirement that:
    When we are creating a new user and click save, then a user is created and to that user automatically a role should get assigned (without manual assignment of role to user). the role will have the framework page etc.
    and suppose we are assigning some role to the same user the above assigned automatic role should be deassigned automatically again.
    is there any possible way.
    Please help.
    regards,
    kavitha

    Hi
    When we are creating a new user and click save, then a user is created and to that user automatically a role should get assigned (without manual assignment of role to user). the role will have the framework page etc.
    for the above one we can follow the simple process ,
    as u need 2 assign the role automatically  while creating the user it self, u have to do the following.
    In user Adminstartion we have a button called Copy To New User.
    u just slect a user already created and just click on the button above, the  new user which is going to be created will get all the credntails and roles groups ,everything as the previous one.
    Just have a try .
    Sandeep

  • Can I use the "same" button multiple times for multiple galleries?

    OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
    stop();
    next_btn .addEventListener(MouseEvent.CLICK, nextImage);
    var imageNumber: Number=1;
    function checkNumber(): void{
        next_btn.visible=true;
        back_btn.visible=true;
        if(imageNumber==15){
            trace(imageNumber);
        next_btn.visible=false;
        if(imageNumber==1){
            trace(imageNumber);
        back_btn.visible=false;
    function nextImage(evtObj:MouseEvent):void {
        imageNumber++;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();
    back_btn .addEventListener(MouseEvent.CLICK, backImage);
    function backImage(evtObj:MouseEvent):void {
        imageNumber--;
        mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
        mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
        mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
        mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
        mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
        mc_animals.source= "design/animals/an"+imageNumber+".png";
        mc_icons.source= "design/icons/icon0"+imageNumber+".png";
        mc_objects.source= "design/objects/pc"+imageNumber+".png";
        mc_typography.source= "design/typography/type"+imageNumber+".png";
        checkNumber();

    I'm still a novice with Flash myself, but I have two comments.
    First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
    Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • Problem with Assigning Policy button in Outlook 2010 and Exchange 2010

    First of all, I'm posting here because I'm not sure how to post in the previous version of Exchange forums.
    Secondly, I'm re-posting this from the Outlook forums as I'm not getting any responses there despite of views.
    Hi,
    I'm having an issue in Outlook 2010 where I can't assign personal policies to folders. I have setup personal tags and added the mailbox to the right policy. I have also ran Start-MangedFolderAssistant in Exchange 2010 Shell against the mailboxes.
    When I go into OWA, everything shows up perfectly, I can right-click and assign policies at will, but when I open Outlook 2010 then the Assign Policy button never appears. I force added it to the ribbon and I can see from there that the button stays grayed
    out irregardless of where I click in the folder structure. I have even assigned the mailbox user Owner rights to all the folders to see if it will  make a difference.
    If anyone can help me solve this problem I will very grateful, I'm pulling my hair out here and I'm certain I could just be missing something very obvious somewhere,
    It might be worth mentioning that the company has been using .prf files to configure Outlook thus far, I'm
    looking to eliminate that. I'm not sure if that will have any effect on my current problem.
    Thanks for your time.
    Nico

    Thanks for the reply Max, that's a pretty good link.
    Like is I said though, I have the policies all set up in the Exchange configuration side of things, when I use OWA all the options for applying tags appear. It's just in Outlook 2010 Standard that the Assign Policy button stays grayed out.
    Thanks.
    EDIT:
    This has been solved, looks like version problem with Outlook.
    http://office.microsoft.com/en-us/outlook-help/license-requirements-for-personal-archive-and-retention-policies-HA102576659.aspx

  • Trying to assign number buttons to music

    hi,
    im tryin to make a cd player and have the buttons from 0-9, does any one know how i can assign a song to each button so it can play when then play button is clicked?
    any help would be much appreciated.
    thanks

    You should assign a unique string with each button using setActionCommand() method and then in the listener code retrieve the string using
    e.getActionCommand()
    and now check it and execute the appropriate code.

  • How to Disable or remove Assign Version button in CBIH82 screen

    Hi
    In the T Code CBIH82,the user instead of clicking on Safety measures,by mistake he clicked on ASSIGN VERSION which resulted in the same log entry no appearing 4 times in the Safety Observation report instead of appearing only once.So for this reason the Business wants us to remove  or disable the Assign Version button.Is there any function module to disable or remove the ASSIGN VERSION icon from the CBIH82 screen.Attached is the screen shot of the ASSIGN VERSION icon in CBIH82 screen.
    Regards
    Ismail

    You can put an entry in the magnus.conf of
    ServerString none
    This will make it not display the info about the server type and version but will not make your site any more secure.

  • Can we have one submit button for mutliple report regions querying same tbl

    Hello,
    I have a normal multiple report regions in a page with some editable in those regions, these report regions are querying the same table. Now, Is it possible to have one submit button for all the report regions to update the underlying table data?
    Can anyone please help me out with this one.
    thanks,
    Orton

    First you'll almost certainly need to roll your own - the built-in stuff is fairly basic and more than likely won't help.
    It sounds like your process flow should be something like:
    1) Person clicks button.
    2) You do a select for update in the process to get the loan id and put it in the person's queue. At this point you may want to flag that column as having been assigned so it can't be assigned again.
    3) You then forward them to the form to enter data. Personally I would create my own items and processses and forgo the built-in form stuff but you may be able to use the Automated Row Fetch. If you do your own, you just reference the objects like:
    insert into table
    values(:P1_1, :P1_2, :P1_3)Edit - Another way would be to use a regular form and insert Stop/Start Tables - so it can look like a different section, but it really is just a label. Thats another option.

  • IE8 can not display the radio button in B1iP

    Hi,
    I installed B1i and finished the configuration in B1i. But when assigning systems in B1iP, my IE8 can not display the radio button. Does anyone know how to solve it?
    Dawson Lu

    Hi Eddy,
    Thanks a lot for your proposal.
    Yes the explorer may have some wrong settings. I will check it again or reinstall it.
    Best Regards,
    Dawson

  • How do you make 'chapters 7-12' etc buttons?

    In most commercial DVDs, scrolling through chapters is made easier by having '1-6', '7-12', '13-18' etc buttons.
    I have made a training video with over 100 necessary chapter markers. I really need to streamline by inserting these buttons, but I can't figure out how.
    Is this possible, and if so, how do I do it?

    OK, first of all, I have discovered that I cannot have more than 100 chapter markers, so I have reduced it to 90.
    I have also worked out how to make those 'Chapters 1-6' etc buttons. I select the relevant chapter buttons, and then click on the 'make new menu item'. I then copy and paste it on to the title page.
    However, I am then stuck with an empty page where those buttons used to be. I can click on the '1-6' , '7-12' buttons, and reach those chapters from the title page, but each time I have to go back to the title page. If I click on Scene selection I now just have a a lof of empty pages.
    There must surely be a regular straightforward way to do this.

  • Assigne record button on midi controller

    I have a midi controller (m-audio oxygen 25), i have a record butto0 on the controller  but i cant assigne it to logic ?! I can assign the volumes mixers on the mixers window in logic, but when you it comes to the record button.... I go ctrl+L but i cant assign this button !

    You could also rig up some environment octave switches and put the buttons on a floating window on your screen. Even better, if you have a couple of spare buttons on your MIDI controller that output MIDI messages, you could rig these to control Logic's octave transforms, thus giving your your octave buttons directly on your controller.
    One of the great things about Logic is this kind of thing - you can really configure things to your needs in a way you can't do with other software.

Maybe you are looking for