Can ChaRM 7.1 SP11 handle BOBJ/BODS using CTS+?

Experts,
Our issue: We've configured ChaRM and a Task List has been generated for ABAP components. However when Non-ABAP components, specifically BOBJ/BODS are brought in as logical components we are unable to generate a Task List
The systems are setup as managed systems successfully. But the check in ChaRM is failing with following error message:
Have any of you run into similar issues? Suggestions much appreciated.
Darryl

Hi Srinivasan,
Thanks for the input. We've progressed! Logical components set up; ChaRM activated; Maintenance Cycle & Task list generated and phase is 'Development with release'; Consistency checks showing green...
The issue we're running into is at the RFC stage: when trying to generate the follow-on NC having set Scope and completed Approvals, the system is unable to generate the NC and reset status to 'Validation'.
We think the issue is with the iBase/Components for the BOBJ/BODS systems.
Have attached screenshots:
Any ideas on what the issue is?
Thanks.
Darryl

Similar Messages

Using Charm at cutover to handle deleted objects

Hello experts,
System landscape contains of dual landscap meaning one project ladnscape and one maintenance landscape.
Project: D01>T01>Q01 ( no charm )
Maint: DEV>QAS>PRD ( charm is used )
At project Go Live cutover is done från Project line Q01 to Maint DEV.
All transports imported in Q01 is added manually to import queue of Maint DEV and imported.
After that 1 WB request and 1 Cust. request is created via charm and all objects from the
cutover transports imported are added to those chamr transports. Then charm handles the
transport process through the maint landscape up to production.
Problem
=======
If cutover transports contains deletion of objects, the transports are imported to DEV maint, object is deleted.
When including all objects from cutover transports into the two charm transports it will then ofcourse fail during
releae of the transports on the deleted objects as they no longer exist in DEV maint. This is of course not a specific
charm problem but a TMS problem. Or not even a problem it is as it should be.
Question
========
Is there any way of handling this scenario, can charm in any way handle this ?
Thanks,

I checked the link you provided and that descibes as you say a dual landscape but i don't think it will solve this problem.
As i understand you setup the retrofit process one-way and that would be Maint DEV --> Project DEV.
That is all fine keeping all changes done in maintenance landscape in synk with project landscape.
But the cutover process is manual, as also the drawing states, meaning adding project landscape transports
to Maint DEV system import queue and import them. But if a transport contains objects with the delete flag it will be
deleted in the Maint DEV system. All fine that far. But when you then inlcude all cutover transports objects into a charm transport it will not check if object still exist in Maint DEV system ( wich it does not anymore ), it will include evertyhing that is part of the cutover transports. Meaning you include objects with delete flag on it. When you release this now in Maint DEV system what it does is to check if object exist in TADIR, it does not. You can fool this release process by manually create an entry in TADIR, release the transport, then delete the entry in TADIR. But if you have cutover transports with many deletions, then this is not the way to go.
So please explain how the retrofit procedure would help in the scenarion at cutover and delete flag.
Thanks.

How can I convert a Database Handle from TestStand to LabVIEW?

I want to use a Database Handle (already created in TestStand by an Open Database step) in a LabVIEW-VI (called from TestStand) to connect it with the "Connection Reference" input of the "Easy SQL.vi"? If I use a directly connection via the "TestStand - Get Property Value (Number).vi" I get back the error message 4101 in LabVIEW. How can I convert the Database Handle?
Test Engineering
digades GmbH
www.digades.com

The TestStand database step types use the CVI SQL Toolkit to talk to databases. The handle that you are referencing is an internal memory location and not a actual handle that you can directly use. Currently as implemented the handle that is stored in a numeric TestStand property for the connection and the SQL statement are the handle values returned from the CVI SQL Toolkit. So for the connection handle, you could call the CVI SQL Toolkit function
DBGetConnectionAttribute (
int Connection_Handle,
tDBConnectionAttr Attribute,
void *Value);
and get the CVI CAObjHandle reference. With this you could then call the CVI ActiveX function
CA_GetInterfaceFromObjHandle(
CAObjHandle Object_Handle,
const IID *Interface_Id,
int Force_AddRef,
void *Inte
rface_Ptr,
int *Did_AddRef);
to get the actual ActiveX interface reference. This would have to be converted into a LabVIEW reference.
You may want to consider just using LabVIEW to open a new parallel reference only using the toolkit.
Scott Richardson
National Instruments

How can I get the direction handles to show up for the Position attribute?

How can I get the direction handles to show up for the Position attribute?
I have CS3 and I did the formentioned test and was able to make the handles work for the scale attribute but they don't seem to show when editing the position values.
*I am in the graph editor looking at the "value graph"
*I select the keys and convert the keys to auto bezier (I also tried the ease in and out buttons)
*It changed the graph the way you might think (no longer linear) however the handles are not showing to edit further.
*I also tried using the "convert vertex tool" (part of the pen tool) and still no luck getting those handles.
*the handles only show up in the speed graph but that does me no good.
Please help!
THANKS

I don't have CS3 installed on any of my machines any more but your value graphs for position should look something like this:
There are no handles for position in the Graph editor. You adjust the position curve by editing the motion path in the composition window. Press the G key to bring up the pen tool, then use the modifier keys Crtl/Cmnd and Alt/Option to temporarily switch between select and convert vertex to adjust the paths. Changes will be reflected in the value graphs. You will get editable handles with scale and rotation because these are not spatial properties. Spatial properties, position, Anchor Point, all XY & Z coordinates are edited in the comp window or in the layer window after revealing the properties. IOW, you edit anchor point position paths by opening up the layer window and choosing Anchor Point from the display options.
The Manual isn't wrong. Here's a link to the live docs.

I can't get the middle handles on iBooks Author pop-over widgets to work.

I can't get the middle handles on iBooks Author pop-over widgets to work. Dragging the middle handles should resize the pop-over widget size either vertically or horizontally, but instead they resize the pop-over widget in all directions, as if I'd used the corner handles. I'm talking only about the widget image with the mountains on it, not its contents. I should be able to make a long, thin pop-over, for example. iMac running Mavericks.

The brush tool usually applies a calligraphy brush automatically, but this type of brush is not supported by variable width profiles

Can my macbook 4, 1 handle a 2tb hard drive if it fits into the hard drive bay?

Can my macbook 4, 1 handle a 2tb hard drive if it fits into the hard drive bay?
Does the hard drive brand matter as lon as the har drive fits in the slot?
I want to put a 2tb hard drive in my macbook 4, 1 but I am not sure if the hard drive will work.
Can my computer handle that big of a hard drive?

"If it fits" will be the limiting factor. The largest capacity that I know of that will fit is 1.5 TB.
OWC sold this 1 TB 12.5 mm WD hard disk a while ago that allegedly fit your MacBook4,1 so it stands to reason you won't be limited to a 9.5 mm dimension. The only 2 TB drives that I know of are 15 mm thick and will definitely not fit your MacBook. If and when you can find a 2 TB HDD in the required form factor it will work.

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
Where can I read about it on Adobe web site?
I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Can CHARM be setup to ignore Invalid Component Version?

Hi Gurus.
Our SOLMAN Prod is on version 7.0 SP 25 and I'm trying to activate a new system to use the CHARM for transports.
Can CHARM be configured to take u201Cignore Invalid Component Versionu201D as a default import option like u201CLeave Transport Requester Queue for later Importu201D?
Any suggestions?
Thanks,
Tess

Hi Tess,
Please check below note and link:
1581638 : SAP component checks no longer working in TMS
https://css.wdf.sap.corp/sap/support/notes/1581638
http://help.sap.com/saphelp_nwes72/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/frameset.htm
I hope this will help you.
Thanks
Regards,
Vikram

Can't pull the yellow handles in Graph Editor up and down

I'm trying to fidn a solution for over an hour already.
I can't pull the yellow handles in Graph Editor anywhere like I see it in all the Tutorials. I can only pull it left or right and make it longer or shorter. But when I try to pull it up, the entire point will go up as well.

Thanks a lot for an answer Appreciate it.
No but.. it doesn't work on any.. tried the value graph, speed graph.. or whatever.. I tried it all and none of them worked.... mhh..
Tim

Can i create Default Exception Handler ?

hello how can i create a default handler for all exceptions witch are thrown from all actions from all backing beans.
i want to redirect a user to userfriendly page when some uncatched exception has been created.

Hi JOKe,
I have the same problem with JSF, have you found a solution?
Thanks in advance
David

Can the first generation iPad handle iOS 5

I know with Mac computers after awhile the models cannot support the newest OS. Is this the same with iPads yet and if so can the first generation iPad handle iOS 5?

as an owner of a first gen iPad running iOS 5.1, I can tell you with absolute certainty, that the first gen iPad is completely capable of running iOS 5. I have been running iOS 5 since the day it was released with no problems.

Can the Oracle Secure Backup handle 64-bit inode numbers received from NDMP

How many bytes will Oracle Secure Backup store for inode numbers received from NDMP file history? Can the Oracle Secure Backup handle 64-bit inode numbers?
Thanks
Hsing

Moderator Action:
This post has been relocated from the Storage Systems HARDWARE forum
to the Oracle Secure Backup forum, for closer topic alignment.

Can OSX Server, et al, handle this website's load?

I looked through this forum and the one on Xserve and couldn't find a topic like this.
The site is being converted from an obscure programming language to PHP/MySQL. In functionality, it will resemble a Craig's List for college students. Lots of database interaction. Very few graphics except for multiple small banner ad deliveries on each page. Lots of email interaction generated by a form at the site.
We're planning on picking up a new Xserve, dropping a couple of those 15k rpm drives the Apple Store sells into it, and boosting the RAM to 4gb (?).
What I'd like to know is the following:
1. Can someone give any real world numbers on the performance of OSX/Apache 2.2/MySQL and said hardware? Can the database handle 100k, 500k, 1M records? Are there general rules for how many page views per day that can be served? (Bandwidth should not be an issue...I believe we are allocated 1TB per month, and as I indicated, graphic content is low.)
2. If the server and software can handle X, would is the next logical step beyond X? I realize that this may never happen, but I do need to ask the question for my own peace of mind. In other words, how does one expand beyond the fastest hardware and what I perceive to be as the best software solution?
Right now the site is at zero, and everyone dreams of building the next MySpace or YouTube. If it flops or just never generates tons of traffic, I can figure out how to handle that. My concern is if it does go in the other direction, so, any tips/suggestions would certainly be welcomed. Thank you in advance.
Rob

> Can someone give any real world numbers on the performance of OSX/Apache 2.2/MySQL and said hardware
In most cases bandwidth will be your limiting factor more than CPU resource.
1TB might sound like a lot - and it is if you're doing mostly text-based content - but on a typical traffic sine-curve it equates to about 300kbps. Your server is more than capable of handling that without breaking a sweat (database schema notwithstanding).
All my servers are running multi-megabits per second and I still have room to grow.
1 million rows in a MySQL database is not large. I have MySQL databases using hundreds of millions of rows. Beware of your database schema (query optimization and indexes will make a BIG difference to performance).
The next logical step as far as scaling would be multiple front-end web servers talking to the database server. There are numerous solutions for load balancing traffic across multiple servers, depending on $$s and flexibility needs.
The biggest factor is going to be in choosing the language to write the site in. PHP isn't necessarily the best choice. You need to be very careful (and not an 'average' PHP programmer) to be able to eke the best performance out of a busy site (esp. when it comes to database interactions - you need to cache the data in the app rather than hitting the database for every single page hit).
There's nothing wrong with PHP - just be aware of its limitations and be prepared to deal with it (whether through code optimization or another language switch).

Can the GPIB-ENET/100 handle multiple TCP connections?

Can the GPIB-ENET/100 handle multiple TCP connections from multiple computers?
-Daniel

Yes, the GPIB-ENET/100 can handle multiple TCP connections.
To safely access the same GPIB-ENET/100 or GPIB-ENET from multiple applications on one or more computers at the same time, use the iblck function. The iblck function prevents one application from interrupting a call made to the GPIB-ENET/100 or GPIB-ENET from another application. Without it, one application could cause an I/O operation initiated by another application to abort or cause other unexpected behavior.
Check the NI-488.2 User Manual for more details:
http://www.ni.com/pdf/manuals/370428a.pdf
Winston L.
National Instruments

Can you share your keyboard and mouse when using S...

can you share your keyboard and mouse when using Skype Screen share?
I want to give a remote user access to a application on my computer. Is this posisable with Skype?
Can you share just one application on yourscreen and not the complete screen?

you can share both your entire screen, or just a specific window of program in your computer. it is not possible to give someone a remote access to your computer through skype, and it is also not possible to share your mouse and keyboard.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Can ChaRM 7.1 SP11 handle BOBJ/BODS using CTS+?

Similar Messages

Maybe you are looking for