Can Cisco ASA work with spaces in LDAP DN string to authenticate and assign group policies?

I am having the hardest time getting a definitive answer to this;  basically, I have a Cisco ASA firewall that is using AD via LDAP to authenticate  users and assign them a group policy based on certain AD group memberships.
The problem I think I have is that due to how our AD forest is structured, I have spaces in the DN string, as shown below...  I have tried enclosing the entire string in quotes, etc.  - nothing seems to work.  Basically, the string is not matched, and the users are assigned a non-matching default policy.  Cisco TAC thinks it is due to the spaces (highlighted) but I am not sure sure.
Can some one please advise?
CN=VPN_SSL_SPLIT,OU=Grps - ACS,OU=Res - Groups,OU=BU - Vesna.Resources,DC=DOM1,DC=US,DC=LOCAL

We can troubleshoot this issue. Please provide me the following outputs:
show run aaa-server
show run ldap
Turn on "debug ldap 255" and reproduce the issue. Paste the output here.
Regards,
Jatin Katyal
*Do rate helpful posts*

Similar Messages

  • Does microsoft word 2010 work with spaces in osx 10.5.8?

    does microsoft word 2010 work with spaces in osx 10.5.8?

    In order to set up and install the new AirPort Extreme:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    would it work with my older osx 10.6.8?
    Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
    Only the devices listed above can be used to set up and make any changes to the new AirPort.

  • Urgent-- could cisco uc320 work with dumb switch ? how to configure

    could cisco uc320 work with dumb poe switch, with its voice vlan alway in 100, I can't change it, and my phone can not find the pbx through the switch, if it can, how can I configure it.

    Hi Rex,
    If the switch is unmanaged the 802.1q (tagged) ethernet frames typically pass right through the switch as if the phone was directly connected to the UC320W.  In this case both voice VLAN works and data VLAN. I would guess that if a switch has PoE that it is a managed switch though.  If it is a managed switch you will need to configure ports, vlans, and possibly CDP passthrough.
    Chris

  • Can Minidisplay Port work with the new Thunderbolt Display?

    I have a 2009 MBP 15 inch with Mindisplayport.
    Can Minidisplay Port work with the new Thunderbolt Display?
    If not, is there any adaptor i can use to make it work.
    I also have the new MBA with thunderbolt socket.
    Cannot decide which display to get.
    Thanks.

    Here's a new article that basically covers and clears up all the new Thunderbolt display questions (same things I previously stated).
    Enjoy!!
    http://www.tuaw.com/2011/09/18/thunderbolt-display-daisy-chaining-spec-cleared-u p/

  • HT4753 Can auto save work with Photoshop 5.0?

    Can auto save work with Photoshop 5.0?
    [email protected]

    No. Autosave/Versions must be built into the app itself to use those OS features. It doesn't work just because it's part of the OS. None of the CS6 apps support it, either. The only Adobe apps that do are the latest versions of Photoshop Elements and Premiere Elements. And that's only because the have to in order to be allowed in the App Store. In both cases, Adobe also gives users a preference to turn it off.
    What Adobe did do in Photoshop CS6 is add an autosave feature of their own. It saves your work according to whatever time increment you choose. Then if the app crashes, it will try to reopen the saved data when you relaunch the app.

  • Can Oracle APEX work with other databases?

    Can Oracle APEX work with other databases like Microsoft SQL Server or Sybase... etc.?

    Though, the Generic Connectivity does not cost extra.
    It doesn't have all the features of Transparent Gateway, but if you can access the foreign database with an ODBC driver,
    it's an easy way to integrate multiple databases.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14232/gencon.htm#HETER007
    In one application, I pull data into materialized views from MS Access and Lotus Notes.
    Since Apex lives in an Oracle database, it inherits all of the functionality of Oracle.
    There's not much it can't do.

  • Ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

    ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

    Use this ancient work-around:
    Create mutli-page PDF | Illustrator

  • Can any monitor work with my imac12,2 (27") as a dual monitor?

    Can any monitor work with my imac12,2 (27") as a dual monitor?

    there is a app called Btv which will allow you to record video and audio that is inputed from the A/V card (wings personality card). depending on the cpu speed you have difrent recording results. i know it uses QT but im not for shure if it will use any codec that is installed in QT tho.
    here is where you get Btv
    http://www.bensoftware.com/
    i know there is others maybe for OS 9.2.2 but i would not know where to look. maybe some one else can chime in to add more choices

  • Can Apple TV work with hulu plus?

    Can Apple TV work with hulu plus?

    It's not all about Apple, Hulu has to agree too. They've blocked their app from airplay as well.

  • 1080p. Can FCP X work with it?

    I have a client (wildlife researcher) who needs to create some QT files for a scientific project. He needs the highest frame rate possible (he has a prosumer camera that shoots 1080p) Can FCP X work with 1080p? I told him that 720p has the same frame rate but he would like the added resolution. What do I do?
    Best.
    tom

    Since FCPX will let you create a custom 1080p project with the following frame rate options:
    23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p and 60p
    I would say: yes, FCPX will support a 1080/60p project for the highest available frame rate. However, realize that 1080p can be *any* of those listed frame rates. The only thing you can discern for sure by "1080p" is that the video is single field "progressive" and not interlaced.
    1080/60p is unsupported in AVCHD (so far) so your camera will either deliver some other format, and not AVCHD. The highest supported format in AVCHD (again, so far) is 1080/60i.
    Other 60p size formats larger than 1080 supported by FCPX are 2K and 4K.

  • Can lightroom for work with window 8?

    can lightroom for work with window 8?

    Which version of LR?
    Lightroom 4, yes.
    http://www.adobe.com/products/photoshop-lightroom/tech-specs.html

  • Can apple tv work with public WI-FI?

    I want to buy an apple tv but I am aware that roku cannot work with public WI-FI, which is all I have for internet. Can Apple TV work with Public Wi-Fi ?  (this is not related to my computer.) 

    It's not all about Apple, Hulu has to agree too. They've blocked their app from airplay as well.

  • Can iPod Touch work with Apple Watch

    I plan to buy an Apple Watch , And I have iPod 5th Generation . So , I wanted to ask that can this iPod work with Apple Watch?

    No, only the recent iPhones
    Requires iPhone 5 or later.

  • When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please

    When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please

    If your iPad was work provided there may be options that they locked out. For example, a privately owned device can be set to never auto lock (last I knew anyway) but it's not uncommon for work or school provided devices to not have the 'never' option.

  • Working with clobs or extremelly large strings - please urgent

    Hi,
    i have a VARCHAR2 variable that is VARCHAR2(32767), is this possible?
    and i receive to the procedure a VARCHAR2 with almost 28000 character, then i have to insert that value as a CLOB in a xmltype table. This would look like a question to XML DB forum, but what i really need to know is how i can insert a string of that value in a table with a CLOB field. When i try i receive missing expression error. here goes the code:
    Procedure Insert_Data(xmlSTR in VARCHAR2)
    IS
         SQLStmt                                   VARCHAR2(32767);
    xmlDoc clob;
    BEGIN
    xmlDoc := 'xmltype(''<?xml version="1.0"?>' || xmlSTR || ''')';
    xml_table_name := 'XML_TABLE';
         EXECUTE IMMEDIATE 'create table XML_TABLE of xmltype';
    -- EXECUTE IMMEDIATE 'INSERT INTO ' || xml_table_name || ' VALUES (' || xmlDoc || ')'; --> with this expression i receive "PLS-00382: expression is of wrong type" error in compiling time.
    -- and with this i get "missing rigth parentesis" error in run time
         SQLStmt := ' INSERT INTO ' || xml_table_name || ' VALUES (' || xmlDoc || ')';
         EXECUTE IMMEDIATE SQLStmt;
    i'm working with oracle 9.2.07 in windows xp and also tried creating a table with a CLOB column and insert xmlDoc value for it, creating a loop and concatenating value from the string
    can someone help please

    You need to match your datatypes. Either insert an xmltype into a table of xmltype or insert a clob into a clob column. I have demonstated both below.
    scott@ORA92> CREATE OR REPLACE PROCEDURE insert_data
      2    (p_xmlSTR      IN VARCHAR2,
      3       p_xml_table_name IN VARCHAR2)
      4  AS
      5    v_xmlDoc          xmlTYPE;
      6  BEGIN
      7    EXECUTE IMMEDIATE
      8        'CREATE TABLE ' || p_xml_table_name || ' OF XMLTYPE';
      9    v_xmlDoc := XMLTYPE ('<?xml version="1.0"?>' || p_xmlSTR);
    10    EXECUTE IMMEDIATE
    11            'INSERT INTO ' || p_xml_table_name
    12        || ' VALUES (:b_xmlDoc)'
    13        USING v_xmlDoc;
    14  END insert_data;
    15  /
    Procedure created.
    scott@ORA92> SHOW ERRORS
    No errors.
    scott@ORA92> BEGIN
      2    insert_data
      3  ('<Warehouse>
      4        <WarehouseId>1</WarehouseId>
      5        <WarehouseName>Southlake, Texas</WarehouseName>
      6        <Building>Owned</Building>
      7        <Area>25000</Area>
      8        <Docks>2</Docks>
      9        <DockType>Rear load</DockType>
    10        <WaterAccess>true</WaterAccess>
    11        <RailAccess>N</RailAccess>
    12        <Parking>Street</Parking>
    13        <VClearance>10</VClearance>
    14    </Warehouse>',
    15   'xwarehouses');
    16  END;
    17  /
    PL/SQL procedure successfully completed.
    scott@ORA92> DESC xwarehouses
    Name                                                  Null?    Type
    TABLE of XMLTYPE
    scott@ORA92> SELECT * FROM xwarehouses
      2  /
    SYS_NC_ROWINFO$
    <Warehouse>
      <WarehouseId>1</WarehouseId>
      <WarehouseName>Southlake, Texas</WarehouseName>
      <Building>Owned</Building>
      <Area>25000</Area>
      <Docks>2</Docks>
      <DockType>Rear load</DockType>
      <WaterAccess>true</WaterAccess>
      <RailAccess>N</RailAccess>
      <Parking>Street</Parking>
      <VClearance>10</VClearance>
    </Warehouse>
    scott@ORA92> DROP TABLE xwarehouses
      2  /
    Table dropped.
    scott@ORA92> CREATE OR REPLACE PROCEDURE insert_data
      2    (p_xmlSTR      IN VARCHAR2,
      3       p_xml_table_name IN VARCHAR2)
      4  AS
      5    v_xmlDoc          CLOB;
      6  BEGIN
      7    EXECUTE IMMEDIATE
      8        'CREATE TABLE ' || p_xml_table_name || ' (clob_col CLOB)';
      9    v_xmlDoc := '<?xml version="1.0"?>' || p_xmlSTR;
    10    EXECUTE IMMEDIATE
    11            'INSERT INTO ' || p_xml_table_name
    12        || ' VALUES (:b_xmlDoc)'
    13        USING v_xmlDoc;
    14  END insert_data;
    15  /
    Procedure created.
    scott@ORA92> SHOW ERRORS
    No errors.
    scott@ORA92> BEGIN
      2    insert_data
      3  ('<Warehouse>
      4        <WarehouseId>1</WarehouseId>
      5        <WarehouseName>Southlake, Texas</WarehouseName>
      6        <Building>Owned</Building>
      7        <Area>25000</Area>
      8        <Docks>2</Docks>
      9        <DockType>Rear load</DockType>
    10        <WaterAccess>true</WaterAccess>
    11        <RailAccess>N</RailAccess>
    12        <Parking>Street</Parking>
    13        <VClearance>10</VClearance>
    14    </Warehouse>',
    15   'xwarehouses');
    16  END;
    17  /
    PL/SQL procedure successfully completed.
    scott@ORA92> DESC xwarehouses
    Name                                                  Null?    Type
    CLOB_COL                                                       CLOB
    scott@ORA92> SELECT * FROM xwarehouses
      2  /
    CLOB_COL
    <?xml version="1.0"?><Warehouse>
        <WarehouseId>1</WarehouseId>
        <WarehouseName>Southlake, Texas</WarehouseName>
        <Building>Owned</Building>
        <Area>25000</Area>
        <Docks>2</Docks>
        <DockType>Rear load</DockType>
        <WaterAccess>true</WaterAccess>
        <RailAccess>N</RailAccess>
        <Parking>Street</Parking>
        <VClearance>10</VClearance>
      </Warehouse>
    scott@ORA92>

Maybe you are looking for

  • Language problem on import

    hi everyone! i ve oracle 10g2 XE Universal already installed on my pc. i changed NLS_LANG in registry in GREEK_GREECE.EL8ISO8859P7. i am trying to import a file in XE that i exported from oracle 10g2EE (charset AMERICAN_AMERICA.EL8ISO8859P7). import

  • Date between filter not working

    Hi, I am using Action links to open Report2 from Report1. For my 'Date between' filter (current date and previous two days) in Report2, I previously had 'Advanced SQL' statement but later switched to session variables. Now when I am using session var

  • Request for Quotation 8.81PL6 not sending emails

    Hi experts, After following the techical documentation, I've managed to set up the new Request for Quotation functionality in SBO 8.81 PL06. But, even if I receive the event in B1if no email gets sent to the provider... nor any internal message commu

  • Multiple erro messages when installing itunes 9

    I have tried to install iTunes 9 multiple times but I get different error messages. One says Windows error 112 and another the occurs in the middle of installation that says: An error occurred during the installation of assembly 'policy.8.0.Microsoft

  • Message on an email from photoshop elements 12.

    I usually send my family photo's to friends vie Photoshop Elements 12 email. I cannot type in a message in the message block. Has anyone had this issue? Thanks Doug