Can cisco CAP2702i connect to Cisco3850 switch with wireless LAN controller license via another switch ?

If i connect cisco AP - CAP2702i to another switch, and use trunk port between Cisco3850 and the other switch , can the AP able to register with Cisco3850 with wireless LAN controller ? or the AP has to directly connect to Cisco3850 in order to register?

The AP and 3850 wireless management are in same Vlan( vlan202). The AP is new unit and did not join MC before.
What i did on 3850 :
input command - wireless management interface vlan 202
- ap cdp
- wireless mobility controller
Is there any config i miss out on 3850 and any config need to be set on AP ?
From Ap console output show me "could not discover WLC using dhcp ip". Is it due to AP dont have IP address? If AP register with WLC through layer 2 , i believe there is no related with IP.Correct me if i'm wrong.
Due to the 3850 is not a POE, the AP unable directly connect to 3850 . I guess have to use power adapter to power on the AP.

Similar Messages

Can my iPad connect to my BluRay with wireless?

Can my iPad connect to my wireless BluRay player?
Can my BluRay act as an Apple-TV device?

Hi!
With this FileBrowser,
1. can I open an iphoto-library on the ipad?
View the photos from the library?
2. can I stream the photos to apple TV with ipad?
(I have done an library on the TC and would want my family to have access. But they use windows. So I am thinking about buying an ipad for this use)
Thanks!

NAC with Wireless LAN controller

There are 10 VLANs coming out of wireless controller (trunk to L2 Switch).
How do we implement NAC so that clients are forced to go to NAC instead of the L3 gateway?
Thanks!
Prasanna

The CAS configurtaion guide will provide you more data related to your queries.Try configuring CAS which will resolve the issue.
Refer the Clean Access Manager Installation and Configuration Guide present in the following url:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/413/cam/413_cam_book.html
Refer the Clean Access Server Installation and Configuration Guide present in the following url:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/413/cas/413_cas.html

Can no longer connect to the internet with the 580...

Hi, my PC was able to connect to the internet with my 5800 via a USB cable. Now, I can no longer connect to the internet with the 5800 via a USB cable.
I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that. Strangely, it works.
My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
Sorry, if my sentences are confusing. I have a terrible headache at the moment. While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health.
BTW, my PC is on Windows 7 Professional at the moment. I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work. I've also tried using PC suite instead of the Ovi Suite but that didn't work either. What other options do I have, beside hard resetting the phone? Thanks in advance.
Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection".
Solved!
Go to Solution.

Hi,
I am so much tierd by trying to connect my phone to pc.
I have nokia 5800,and I used to connect my phone to PC by USB cable.
But from last 5 days I could not able to connect it.
The problem is that,
when I connect phone to pc,notification comes up that phone connected via ovi suit,but within a minute or 2,
"porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
Please help me in this asap.
I had tried following already:
1.format my PC
2.Installed new ovi suit
now please give me a proper solution on that.
thank you.

Why can't I connect to my iphone5 with my iPad, Snote2 or another iPhone5 through wifi as a hotspot, only through Bluetooth? My Snote2 can't even find the iphone5 as a hotspot.

Why can't I connect to my iphone5 with my iPad, Snote2 or another iPhone5 through wifi as a hotspot, only through Bluetooth? My Snote2 can't even find the iphone5 as a hotspot, even on Bluetooth.
I've reset, restored and updated everything but no go.

WiFi is preferable for use as a hotspot to Bluetooth.
Have you tried Settings > General > Reset > Reset Network Settings?
If you have and it didn't work I would take the iPhone in for service.

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud?

Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud? I don't have iCloud on my MacBook Pro and only intend to use the mini to check e-mail and use Garage Band and Photo Booth for song writing when traveling . . .

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

Can i use a single ended encoder with a 7344 controller?

Can i use a single ended encoder with a 7344 controller?

The encoder inputs of the 7344 are ground referenced. So the answer is yes, you can use a single ended encoder with a 7344 controller. Signal connection should be straight forward.
If you are using a UMI-7764 for signal connections please refer to the "Encoder Terminal Block" section (page 15) of the UMI User Guide. There are drawings for the signal connections for single ended and differential encoders.
For the case that you don't have the user guide of the UMI-7764 please download it from this link:
http://digital.ni.com/manuals.nsf/websearch/AC6FAA69218C9624862567BD0061DDAC?OpenDocument&node=132100_US
Best regards,
Jochen Klier
Applications Engineering Group Leader
National Instruments Germany GmbH

Why can't i connect my ipad to home wireless?

why can't i connect my ipad to home wireless?

Is your iPad seeing the Router SSID (Network Name) in the list of networks? If so what happens when you try to select it? Are you asked for a password? If the network isn't secure then it won't ask you for a password and you should just connect.
Regards,
Steve

Can I use my Ipod Classic(MC297ZP) with Sound Kick SFQ-04 via bluetooth

can I use my Ipod Classic(MC297ZP) with Sound Kick SFQ-04 via bluetooth

If you old charger is a USB (+5V output) it will work. If it is a Firewire charger (+12V) then I think it will still work, but Apple has removed Firewire charging from most of the new iPod lines including the iPhone and 4th Generation Nano. However I think that the 120GB Classic may be the last iPod to still charge off Firewire chargers.
It won't hurt anything to try it. If it doesn't work, you will get a screen display that states that the accessory is not supported or something to that effect.
Good luck,
Patrick

Cisco Wireless LAN Controller Always disconnect

Dear All,
Please help to assist my issue.I used Cisco Wireless LAN Controller model: 5508 with version 7.0.98.0 and I got issue with connection always disconnect ping always loss or some time client can't get DHCP from Controller.
- I configure as Internal DHCP Server with 1 SSID.
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html
- DHCP least is not full and I also try to clear-lease all but still not work.

1. Config dhcp proxy enable
2. In case of internal Dhcp, try debug for clients
using,
debug client <MAC ADDRESS OF CLIENT>

Cisco Wireless Control System need wireless Lan Controller ?

Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

Hi Joao,
The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
From this doc;
http://www.cisco.com/en/US/products/ps6305/index.html
Overview of WCS
The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
Detect and Locate Rogue Access Points
From this WCS doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Hope this helps!
Rob

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

AIR-CAP3501I access point not joining the Cisco 2100 Wireless Lan controller.

Hello All,
I am installing a new LAP (AIR-CAP3501I ) through the wireless lan controller (AIR-WLC2112-K9) with software version 7.0. I have an external ADSL modem which will act as the DHCP server for the wireless clients and the LAP.
Please find my network setup as below:
The ISP ADSL modem , WLC and LAP are connected to a unmanaged POE switch. The LAP gets its power through the POE switch. When i connect the LAP and the WLC to the switch along with the ADSL modem, the LAPs are getting the ip address from the ADSL modem, however they are not joining the WLC for further process.
ADSL Modem ip address: 192.168.1.254
Management ip address on the LAP: 192.168.1.1 ( Assigned to port 1, untagged Vlan).
Ap Manager ip address: 192.168.1.1 ( Assigned to the same port i.e port1, Untagged Vlan).
The LAP is getting an IP address from the ADSL modem in the range of the DHCP scope.
I will paste the logs very soon.
Please let me know if i am doing anything wrong oe what will be the issue.
Thanks in advance,
Mohammed Ameen

Hello All,
Please find the logs for "debug capwap event" from the WLC below:
*spamReceiveTask: Sep 26 19:44:59.196: e8:04:62:0a:3f:10 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join Response sent to 192.168.1.156:45510
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:44:59.198: e8:04:62:0a:3f:10 Register LWAPP event for AP e8:04:62:0a:3f:10 slot 0
*spamReceiveTask: Sep 26 19:44:59.341: e8:04:62:0a:d1:20 DTLS connection not found, creating new connection for 192:168:1:158 (45644) 192:168:1:2 (5246)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 DTLS Session established server (192.168.1.2:5246), client (192.168.1.158:45644)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 Starting wait join timer for AP: 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.121: e8:04:62:0a:d1:20 Join Request from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 Join Response sent to 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:45:00.125: e8:04:62:0a:d1:20 Register LWAPP event for AP e8:04:62:0a:d1:20 slot 0
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 Configuration Status from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 CAPWAP State: Configure
*spamReceiveTask: Sep 26 19:45:00.273: Invalid channel 1 spacified for the AP APf866.f2ab.24b6, slotId = 0
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP info for AP e8:04:62:0a:d1:20 -- static 0, 192.168.1.158/255.255.255.0, gtw 192.168.1.254
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP 192.168.1.158 ===> 192.168.1.158 for AP e8:04:62:0a:d1:20
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Setting MTU to 1485
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Finding DTLS connection to delete for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Disconnecting DTLS Capwap-Ctrl session 0xa06d6a4 for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 CAPWAP State: Dtls tear down
*spamReceiveTask: Sep 26 19:45:00.277: spamProcessGlobalPathMtuUpdate: Changing Global LRAD MTU to 576
*spamReceiveTask: Sep 26 19:45:00.277: e8:04:62:0a:d1:20 DTLS connection closed event receivedserver (192:168:1:2/5246) client 192:168:1:158/45644).
The Acess point joins the Controller for 2-3 seconds and then unjoins again. I am not sure what i am doing wrong here. The access points are getting the IPs from the ADSL modem through the switch, then it talks to the WLC, however it does not join the controller for further process.
Note:
The Managemnet interface and the AP manager interface are assigned to the same port 1 with unassigned Vlan as mention above.

Is WCS a must with 4400 LAN controller

Hi,
We're looking at the 4400 series wireless LAN controller with Lite APs. It's not clear if the WCS is required or if the 4400 has management capabilities in it and the WCS may not be required. So, can we run a 4400 series without a WCS and still maintain management of our wireless network. If so, what capabilities would we be missing...if any?
...thanks in advance.....J

Hi Jamie,
The WCS is not required to run any WLC or WiSM. It is a very nice management tool but it is not a must. We have been running LWAPP for a few years now without the WCS and we are just now getting ready to deploy it;
Deploying Cisco 440X Series Wireless LAN Controllers
http://www.cisco.com/en/US/docs/wireless/technology/controller/deployment/guide/dep.html
Managing the Controller with WCS
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd802570d0.html
Cisco Wireless Control System Configuration Guide
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_book09186a00806b57ec.html
Hope this helps!
Rob

Can cisco CAP2702i connect to Cisco3850 switch with wireless LAN controller license via another switch ?

Similar Messages

Maybe you are looking for