Can clips made with different recording modes (SP/LP) be put in same movie?

My cousin recorded the family reunion in LP mode while I had my digital camcorder set to SP. I'm using Premiere Elements 4 to make a DVD using everybody's stills and the two digital camcorders' movie clips. Does it matter about the different recording modes? Can I put clips of both speeds in the same authored movie? If not, I guess I could make two movies and burn both files to the same DVD disk. Can they have the same menu? Or how do I make it easy for viewers to play both movies on their TV (not on a computer)? Thanks for your help and for any suggestions.

If you're talking about a miniDV camcorder that's recorded in both LP and SP -- it won't make any difference at all. Digital data is digital data, as far as Premiere Elements is concerned.

Similar Messages

  • Reading fixed length file with different record types

    Hi,
    I need to read a fixed-length file with different record types, but the record identifier is in 31st position and not in 1st position.
    But if I give 31 as position in File adpater wizard, BPEL takes whole 1-31 as identifier.
    How we need to read such files.
    Thanks
    Ravdeep

    hi ,
    u cannot use the default wzard for this
    use some thing like this nxsd:lookAhead="30" nxsd:lookFor="S"have a look at the below link it has some examples
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/nfb.htm

  • Dragging a clip made with In/Out points from viewer

    I'm using Tom Wolsky's book FCE 3.5 to learn FCE 4.
    I'm hoping it will at least get me through some of the minutiae.
    I'm on page 44 and 45 "Slicing your clips" and under "Slice 1" #9 it says I should drag the marked clip from the viewer and drop it in my newly created bin marked "Clips".
    When I drag whats in the viewer with my new In/Out points into my browser, I'm dragging the entire "Temple" clip into my browser that has the marked In/Out points on it, not just the clip made with the In/Out points.......my understanding is that I'm supposed to be dragging the clip I just made, not the entire Temple scene with the In/Out points simply marked......
    Naturally, any help or scathing insight would be great!

    I guess I wasn't supposed to be dragging the clip itself, but the master clip >with In/Out points on it..........
    but the master clip >with *(_new in/out points_ and been made to a Modify>Make Master Clip)* In/Out points on it.
    The new ones are now independant.
    Al

  • Can you have different I cloud accounts on different devices. Like 4 phones with different numbers while keeping them all on the same I tunes account?

    Can you have different I cloud accounts on different devices. Like 4 phones with different numbers while keeping them all on the same I tunes account? My family shares one I tunes account but it would be nice to be able to have a different I cloud for family member. Is there a way to do this. Because the I cloud part on the setting on the phone and I pad are greyed out on the phones so you can't change the user.

    If they are greyed out then usually this means that the account is not validated on that device.  The Delete Account button at the bottom should still work and allow you to remove the current account form the iCloud Section of Settings.
    To answer your question, yes.  There are four places you can use an Apple ID on an iOS device:
    Settings > iCloud
    Settings > Messages
    Settings > FaceTime
    Settings > iTunes & App Stores
    The iTunes & App Stores is the only one you want to use a shared (family) Apple ID account.  The other three you will want a unique Apple ID for that person to prevent info merging or messages getting shared, etc.
    Using Different Apple IDs for iCloud and iTunes

  • Can PI work with different versions of MQ?

    Hello
    I have requirment to let PI (7.1) communication with different versions of MQ (5.3 and 6.0). However I doubt that this is possible.
    As for MQ, the JMS drivers of the MQ needs to be deployed to PI. For MQ 5.3 and 6.0, different drivers (6.0 has additional jar files as 5.0) are to be packaged into com.sap.aii.adapter.lib.sda and deployed to PI. There is no way you can deploy different version of drivers onto the same PI box. even if you can deploy different version of hte driver to PI box, it won't work in runtime, simply because, when the driver is loaded, there is no way to tell PI class loader which version of class (driver) to load.
    how do you guys think of this?
    Thanks
    Jayson

    Hi
    I think that the 6.0 version should be backword compatible and should work with 5.3 also.
    Did you tried it?

  • Two ODSs share the same InfoSource but with different updata mode load?

    We've got two different ODSs (ODS1 and ODS2) for two respective clients (client 1 and client 2).  Client 1 has already going alive and in the InfoPackage, we only pick up ODS1 (Client 1) as feeding target and we have conducted initial load and several times of Delta loads for ODS1 (data load daily).  But now we are going to start to load data to ODS2 (Client 2) and at the same time we will have to continue our delta load to ODS1. 
    It could not be possible that the two ODSs will be feeded data with different pace (ODS1: continue delta load, ODS2: initial load) if they share the same InfoSource.  Then what's the best way to resolve this issue?
    Thanks

    hi Pradip,
    Tell you a bad news that the solution doesn't work on two of the EBP (a source system which is similar to R3, we've got 4 EBP ODS/InfoSources, but two of the four don't work with the last step listed below) ODSs/InfoSources.  The steps I took on production are:
    1. Conduct Full Repair data load to ODS2;
    2. Delete init option of ODS1 from Scheduler menu;
    3. Run Init without data transfer to set delta pointer for both ODS1 and ODS2.
    But the last step to run Init without data transfer has taken 1 whole day and eventually becomes red since it takes so long time to set delta pointer. 
    When I said our solution worked is that I conducted the test on our GL ODS and the Init without data transfer took about 1 hour to finish. 
    Also when we conduct the last step to do the Init without data transfer to click Start button to set pointer, a msg box titled "Activate ODS Data" pops up saying that "No requests have been selected for activation. Do you want to make a selection, or activate all the requests?" with buttons "Activate all requests", "Select requests" and "Cancel".  If clicking the button "Select requests", another msg box pops up to prompt to input a Date range, we didn't input any date range, just click continue, then the Init without data transfer will run forever!
    Thank
    Message was edited by: Kevin Smith

  • How to update a column with different values but all other row values r sam

    Hi,
    I have a table like this.
    Col1 col2 col3 col4
    10 20 30
    10 20 30
    10 20 30
    i need to update col4 with different values coming from other table like this
    Col1 col2 col3 col4
    10 20 30 xxxx
    10 20 30 yyyy
    10 20 30 zzzz
    how can i update the table. pls let me know how to use the where condition in the update stmt.
    thanks,
    jay
    Edited by: user2558790 on Nov 20, 2009 12:26 PM

    what is the logic for this kind of update...????
    Greetings,
    Sim

  • How can I have two different windows up on one screen at the same time?

    How can I have to different windows open on my screen at one time? Kind of like a split or shared screen.

    If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
    If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

  • Transfer records to UNIX with different record length

    Hi all,
    I have the following problem. I have to transfer records to a UNIX file. The maximum length of a record is 2000. The records are TAB seperated. I also have records which have a length less then 2000. When i look at the file in Excel the last field is always very large. Isn't there a way to only transfer the real length of the record. I have tried to transfer the record in Binary an Text mode. I used the Length statement, but nothing worked for me.
    Hope anyone can help me.
    Greetings Maarten

    Hi Maarten,
    "Transfer" with "length" option should work. I am not sure what you passed as length to the "transfer" command. Did you used a fixed length of 2000 or did you actually found out the record length of each record and passed that value?
    Scenario 1.
    Here in this scenario, you will always have the last field set to maximum length.
    loop at itab.
    transfer itab-record to file length 2000.
    endloop.
    Scenario 2.
    In this second scenario, you should have your excel's last field set to the maximum occupied length of that field.
    loop at itab.
    v_len = strlen( itab-record ).
    transfer itab-record to file length v_len.
    endloop.
    Hope this helps.
    Srinivas

  • Can AD work with different forests?

    Hello Community
        Using AD is it possible to bring in a "group" from a domain
    in one forest into a group in a domain in a different forest
    when a one-way trust relationship exists, if so how?
        Note: If it is possible can the users "friendly" username
    be retained instead of the usernames changing into  "SID's"?
        Thank you
        Shabeaut

    It is possible.  My production has a one way trust with another forest and I am able to assign permissions/group nesting like how you're asking.
    For your SID translation, there is a security option you may want to check in to.
    LocalSecurityPolicy(secpol.msc)->Security Settings->Local Policies->Security Options -> Network Access: Allow anonymous SID/Name Translation.
    That setting has given me grief in the past.
    -If you have found my posts to be helpful, or the answer, please mark it appropriately.  Thank you.
    Chris Ream

  • I can't type with different language?

    I'm trying to insert a text into my video in different language, but for some reason, it shows up as a box with "X" mark on it
    do I need to download a language pack?
    help please! thank you!

    If this is what you are getting:
    then you have chosen a font that PrE's Titler cannot display properly. This was a Kozuka font (free version).
    Also, many Multi-national fonts will not display properly, and will default their display to Times or Arial. I have found many, that neither PS, nor Titler, can properly display, even if they are well-written. When that happens, I often opt for doing the work in Adobe Illustrator, then Placing the AI document into a Photoshop Custom Image, that matches my Project, letting PS Rasterize the Image.
    Good luck,
    Hunt

  • Merging/Flattening Layers with different blending modes and maintaining the visual appearance

    Hello,
    I see there are many others that are having the same problem as me. And alas, it doesn't seem like the problem has been solved or very understood for that matter.
    I want to be able to take a document, that has multiple layers, inside of multiple groups with various layers having various blending modes applied to them and from within that document, select simply two of those layers, one with a Divide blending mode and the other layer Normal, merge those two layers, but have the visual appearance of the merged layer maintain the visual appearance of what the layers looked like before I merged them.
    Everytime I attempt this, Ps takes my Divide layer, reverts it back to Normal and then merges the layers, thus changing the appearance of what it was before the merge. This is not the desired result.
    I understand that when you flatten an entire series of layers, it applies all the blending modes and maintains the visual appearance. Is there a way to do this with just two layers instead of all the layers? If so, that would be great information. If not, why not?
    Thank you
    Jake

    Short answer:  No. 
    A "layer" with a specific blending mode implies a sequence of math operations on a given pixel.  Think of the visible pixel R, G, and B values as the result of a potentially complex math formula that combines numbers from each layer in complex ways (those ways being defined by the blending mode you've chosen).  You can't always simplify particular factors of your choosing in a given math formula.
    The next step is to examine why you would want to do so.  Perhaps there's a more direct way to achieve your goal that would avert the need entirely.
    Another possibility, if the effect of several layers together is something you'd like to manipulate as a unit, is to Group the layers.
    -Noel

  • Windows 10 can't shutdown with fast startup mode

    I can't shutdown my laptop with fast startup is turn on.All my hardware are off, but the light in power button still on.I have to press and hold the power button to make it off. Then I turn off the fast stratup function and my laptop can shutdown completly.But my laptop can't enter the sleep mode.When i close the lid, it turn off all the my hardwares but the light power won't blink like usual.When i open the lid, the light in power button still on, but i doesn't do anything when i press it. I have to press and hold it again to make it off. I don't have this problem in my previous windows 8.1My Windows 10 is a fresh install. What should i do? Thx

    I have installed all updates from Windows Update and all drivers from Toshiba US website. I can't find the Service Station for Windows 10 from Toshiba website.  I only found the one for Windows 8.

  • Can 2 people with different apple id's share an iTunes library

    We have 2 apple id's and one laptop. Can we shre our iTunes library?

    iCloud has nothing to do with content like songs and apps that you purchased. You could use one Apple ID for iTunes and App Stores that you would have to set up in "Settings > iTunes & App Stores (Both of you could use the same Apple ID for that). And then everyone of you could set up a (new) iCloud account in "Settings > iCloud" so that everyone of you has its own icloud.com email address, calendars, notes, reminders, data, backups etc.

  • LSMW load a file with different record format

    anyone can help me out here?
    I am trying to load a file which has exactly same record format except for the first line, and the first line is not neglectable. If i want to load this file to SAP within one LSMW load, is it feasible?
    thanks in advance.

    LSMW records fields screen by screen.  When you have recorded your LSMW, the country code, company code and personnel area are in the first screen.  So, this data must be on every line of your data file.
    Example of how your data file should be:
    Country     CoCd      Pers.Area         Field1DataLine1          Field2DataLine1         ...
    Country     CoCd      Pers.Area         Field1DataLine2          Field2DataLine2         ...
    Country     CoCd      Pers.Area         Field1DataLine3          Field2DataLine3         ...

Maybe you are looking for