Can cm_createdby and cm_modifiedby be filled using WebDAV Rep Manager?

Hello everyone
I have got a rather simple question regarding the WebDAV Repository Manager or perhaps it's more correct to say the WebdAV Protocol.
Does any of you know if it is possible to integrate from a file server into EP KM using the WebDAV Repository Manager, and then be able to show properties like cm_createdby and cm_modifiedby in KM even though the properties were created/edited on the file server?
Kind regards,
Martin

Hi Julian
If you go to Properties > Summary Tab > Origin for a word document there is both an Author and a Last Saved By entry. I was wondering if it would be possible to map these attributes into KM through the WebDAV Repository manager, but apparently not? (I know these attributes are only available for certain office documents).
This changes my question a bit - and I'm afraid I will not like the answer.
Question:
If I have implemented a number of files using the WebDAV repository manager into Portal KM, is there a way in which I can display an author/document responsible? I guess I cant get the Author-property from the fileserver, but is there any way I can maintain an author/document responsible attribute from KM then? Or is that only possible using CM repositories in FSDB and DBFS modes?
I will not be able to change my integration from WebDAV to CM repositories in FSDB- or DBFS-mode bacuse thay solution does not support SSO.
Kind regards,
Martin

Similar Messages

Multiple users, devices & Apple IDs in the house. Can we, and how would we, use Home Sharing?

We have three users in the house, each with their own Apple ID, using multiple mac/PC devices. Can we and how would we use Home Sharing to share music, apps, etc?

Do you have a computer. You can't share music or apps from one mobile device to another. To share photos you need to use photo stream shared albums.

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

When I click options in addons/extensions the addon window freezes and I have to use the task manager to end the process. Any solutions?

When I click options in addons/extensions the addon window freezes and I have to use the task manager to end the process. Any solutions?

There may be a problem with one of the files that stores details of installed extensions. Try deleting these files as shown in the "Corrupt extension files" section of this link - https://support.mozilla.com/kb/Unable+to+install+add-ons
Though that article is not specifically about your problem, the method shown in the corrupt extension files section may help. When you restart Firefox after deleting those files, the list of installed extensions is rebuilt and this will hopefully fix your problem.

Photoshop and Illustrator updates fail using Adobe Application Manager, why and what can I do?

In the Adobe Application Manager, it says there are updates for both Photoshop and Illustrator. When I click to update, they both downloaded and attempted to install and in the middle of this process, Application Manager shows that the updates fail. After this, upon restart of my Mac–running Lion–Illustrator shows that it's up to date in the Application Manager and Photoshop shows an update is available. Upon trying to re-update Photoshop again, the update fails again and again.
I have updated before a few days ago with no problem, so I don't understand why the updates are failing and why after doing so, now Illustrator shows that it is up to date and Photoshop does not.
Has anyone else had this problem and if so, does anyone know why and what I can do about it?
Thank you.

Hi Richei Creative,
These would be my suggestions:
Create a new user account with administrative rights, log out of your current account and into that one, launch Adobe Application Manager and attempt the Photoshop update again.
Instructions if you need them - http://support.apple.com/kb/PH11468
If this fails, uninstall Photoshop (Applications > Utilities > Adobe Installers) and reinstall Photoshop then from Adobe Application Manager the attempt the Photoshop update again, also from the newly created user account.
Hope these help,
-Dave

I'm running 10.7.4 and have many problems using webdav to link to a remote server

I connect to a company called Egnyte which provides remote data storage. Their solution is really elegant, but I have a lot of problem with speed using the webdav plug in. It is especially bad on Microsoft Office documents which can take up to a minute for simple documents to open and close. And when I have two documents on the cloud open at the same time and try to paste between them...forget about it. It takes forever!
We also have folks in our company which use Windows based machines and they do not have the same problem. Egnyte hasn't been able to solve the problem.
Any information about webdav problems on Lion/Macs would be greatly appreciated.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

How do I connect two video cameras to my computer have them both show up on the desktop at the same time so I can see and capture both images using a screen capture program?

Hello,
I am a teacher and want to make some videos to post online for my class. I would like to have it set up so that I have a powerpoint presentation going, a video camera pointing at a piece of paper I can write on and another video camera pointing at me. How do I do this? I have seen several solutions but they seem to be for switching between videos whereas I want both video images to be on at the same time.
Also, is there a screen capture program you would recommend?

Go to System Preferences - Sharing and change the computer name there. You can also, optionally, change the name of your hard drive to further clarify the origin of your backups. Click once on the "Macintosh HD" on your desktop, then click its name to allow you to edit it.
Matt

Can window and aggregate SQL functions used in Pro*C embedded SQL?

It appears that the window functions such as dense_rank() over(partition by ... order by ...) are not available in Pro*C embedded SQL. Can somebody please confirm that that is really the case?
Thanks
Rawender Guron

Please refer to this thread: "Is this forum also used for Pro*'C Questions? "
Is this forum also used for Pro*'C Questions?

Can Firefox and Firefox Synch be used on a Kindle Fire(Android)?

Before I try to go through the set up, do you know whether the built-in browser on a Kindle Fire can be changed to Firefox? It appears that Amazon is discouraging or preventing this. Thanks.

The mobile Firefox 9 was listed at http://www.amazon.com/Mozilla-Firefox/dp/B006PKXE3E however it was pulled recently in relation to this tracking bug.
[https://bugzilla.mozilla.org/show_bug.cgi?id=713777 Bug 713777] - Amazon modifies and re-signs apk after uploading "was Cannot install Firefox from Amazon appstore if Firefox Beta already exists on device" (for reading only please).
Took a little to find it as "[https://bugzilla.mozilla.org/show_bug.cgi?id=690791 Bug 690791] - submit Firefox to the Amazon Appstore" was not updated.
You can manually install it and update it manually yourself in mean time since you likely do not have Android Market access. http://releases.mozilla.org/pub/mozilla.org/mobile/releases/9.0/android/en-US/fennec-9.0.en-US.android-arm.apk

Can Window and aggregate functions be used in Pro*C?

Are Window functions like dense_rank() over (partition by ... order by ..) available in Pro*C embedded SQL?
Thanks
Rawender Guron

Please refer to this thread: "Is this forum also used for Pro*'C Questions? "
Is this forum also used for Pro*'C Questions?

Autoconnect and auto launching VPN using VZ Access Manager

Hi,
I am using the 4g wireless broadband on my laptop.
I would like the connection to connect during startup and then launch my VPN immediately all upon startup
Can someone give me to correct preferences to set in VZ Access Manger to accomplish this ?
Ultimately all I will see when starting up is the login window of my VPN
thanks {edited for privacy}

ddecoursey wrote:
Hi,
I am using the 4g wireless broadband on my laptop.
I would like the connection to connect during startup and then launch my VPN immediately all upon startup
Can someone give me to correct preferences to set in VZ Access Manger to accomplish this ?
Ultimately all I will see when starting up is the login window of my VPN
thanks {edited for privacy}
Please follow the steps below and ensure the Run VZAccess Manager at Startup box is checked.
Open VZAccess Manager.
From the Windows desktop, click Start > All Programs (Programs) > VZAccess Manager.
Click Tools > Preferences.
Select the desired tab to view preferences.
WWAN TAB:
Depending upon device and / or software version, some options may not be available.
Ensure desired options are selected then click Set Options.
From the VPN tab, ensure the Automatically start the VPN on connection box is selected then click OK.
Then go to the Options tab and make sure the Run VZAccess Manager at Startup is also checked.
You can also download the latest VZAccess Manager software (if necessary) at the link below:
VZ Acess Manager Link
Thank you.

Microsoft is Office Home and Student 2010-Windows used with macbook pro

can home and student 2010 be used with my macbook pro?

can home and student 2010 be used with my macbook pro?

How to specify finite simulation stop time in VI generated using SIT connection manager

Hello,
I have a SIMULINK model which I want to run on a desktop ETS. I'm following this procedure:
1. Convert the SIMULINK model in a .DLL using RTW build in Matlab. The target of this build is nidll.tlc.
2. Create a host VI with required indicators and map the parameters using SIT connection manager.
3. Configure the DAQ (and then SIT connection manager generated the driver and IO files for me.)
4. Using LV project, run the driver on the desktop ETS and host VI on the host machine.
The code is working fine, without any error.
My question is this: Since in the driver VI, the simulation time is set to -1, which implies "continuous", the simulation goes on until I hit the stop button on the host VI.
I tried changing this default value to some other value. The simulation then does run for the defined amount of time but then I'm getting error 2206.
What is an appropriate way to stop the simulation on the RT target?
Thanks
Gayatri
PS: I'm using LV 8.5, LVRT 8.5, SIT 4.0, Matlab @2007a.

The VI in the Driver VI called SIT Initialize Model.vi has an input called time step (sec) (-1: use model time step) which does what you want it to. It doesn't actually affect the time step of the solver used in the built model DLL, just the rate at which the main base rate loop actually runs in real time. In fact, base rate loop period would be a better name for this control. If you set it, you won't alter your model, but you will be able to adjust the rate of the base rate loop.
Simply create a control from this input terminal on your driver VI and fill in an appropriate period in seconds. Make sure to set this value as default in the control so that the Driver VI remembers it.
You will have to take into account that your model will still think it's running at the time step it was compiled at. So your model simulation time and the actual wall clock time won't match up.
Jarrod S.
National Instruments

TS3479 I can't use air play mirroring because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??

I can't use air play mirroring with the new upgrade on my imac (mountain lion) because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and be able to use it? an upgrade or something??

Welcome to Apple Support Communities
http://www.airparrot.com

I can't use air play mirroring because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??

I can't use air play mirroring because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??

No. There is a 3rd party software, Airparrot.

Can cm_createdby and cm_modifiedby be filled using WebDAV Rep Manager?

Similar Messages

Maybe you are looking for