Can compresed data in cube load upward.

Hi I have a cube where data is all compressed, I tried to load this data to another cube but the DTP process is being stuck in extraction step for hrs.
Is it possible to load data upward from a compressed cube.
Thanks
Amit

Hi Amit,
This seem like a pure BW question, you need to post this on the BW forum.
Anyway, yes you can load from a compressed cube, but since request ID's do not exist you cannot use delta to load it up further. If you plan to do so, you need to load the request up further before running compression.
regards,
Rohit

Similar Messages

How to add a time characterstic(date) to already loaded cube??

Hi All,
We have a cube loaded(by daily deltas) for more than two years now, how can we add a date to this cube, what are the possibilities??
1. do we need to delete all data,add that date ,reload??( quite tedious time consuming ,out of option for now)
2. jut add that date to new dimension, load from now on?? but we may need data from past for that characterstic.
3. if we copy that cube to another cube, add that char to old cube, then reload data from copied cube to old cube. is it possible to load all the data for that new filed for last two years??
Please let me know the successful solutions as iam doing it in production system.
Regards,
Robyn.

Hi Eric,
ya that might be possible,but that charaterstic cannot be derived from the data present in cube as it needs to be derived from R/3 by changing the extract program of that cube.
the plan is to create new cube with similar structure of old one plus this new date field,populate this new cube for say required years data, then generate query as using these two cubes in multiprovider.
do u have any alternate solution for this
Regards
Robyn.

Loading data from cube to Planning Area - Error

I have two cubes. one has history data and other ratios.
the forecast is dis aggregated based on that ratios.
first the ratio data is getting loaded and gets populated.
when i try to load the history data, a error says, CVC not maintained.
there are totally 6 Char used in this Config.
MPOS is created using the ratio cube and has the same char as in history cube, additionally one more sub family.
Can some one help me in this.??
Thanks !!!

hi
char in hist cube
mkt fam
mkt seg
regn
gobl
cntry
Char in the MPOS(from Ratio cube)
mkt fam
mkt seg
regn
gobl
cntry
sub family
the main obj of not including it in hist cube, i forecast @ mktfam level n dis aggre to sub family.
if i include the sub family also in hist cube, then i can forecast @ sub family itself..
the whole dis agg. logic does not serve the purpose.
On the Adjustment of Time series, will try it n revert n back.
like can you please tell me how it affects the process???? or the logic behind doing this????
Thanks!!!
Edited by: Aswath ram on Sep 10, 2008 6:33 PM

Getting an error while trying to load data into cube

Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.

Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray

Frequenty occured ERRORS in loading data to cube

hi sap gurs
can u give me frequently occured errors in loading data to cube.
giri

Hi Giri,
There will be thousands of errors which can occur in any kind of environment.
Some of the errors listed
1. SID missing
2. No alpha conforming values found
3. Replicate datasource error
4. BCD_Overflow error
5. update rule inactive
6. DUplicate masterdata found error
RFC connection lost.
7. Invalid characters while loading.
8. ALEREMOTE user is locked.
9. Lower case letters not allowed.
10. While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
11. object locked.
12. "Non-updated Idocs found in Source System".
13. While loading master data, one of the datapackage has a red light error message:
14. Extraction job aborted in r3
15. repeat of last delta not possible
16. datasource not replicated
17. datasource/transfer structure not active
18. Idoc Or Trfc Error
Pls find these links to help yourself out
production support
Re: BW production support
https://forums.sdn.sap.com/click.jspa?searchID=1844533&messageID=1842076
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b
/people/valery.silaev/blog/2006/10/09/loading-please-wait
Help on "Remedy Tickets resolution"
Re: What is caller 01?
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
https://forums.sdn.sap.com/click.jspa?searchID=678788&messageID=1842076
Production Support
Production support issues
check Siggi's weblog for common errors in data loading
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Assign points if it is helpful.
Regards,
Sreedhar

Loading InfoObject master data into Cube

Hi Guys,
I have a question. I created an InfoObject as a data target and loaded data into that data target. I created a cube and I want to include this infoobject in the cube. Now How do I load data into this cube from the InfoObject.Because the InfoObject doesnt have any option to select data targets, since it is master data.
Data is being loaded into the InfoObejct. But when I check the cube there is no data.
How do I load this master data into the cube without update rules?
Thanks in advance.

Hi,
i think u need load some value to transaction data so that you can report on it, but how you are going to decide which row will be having which value from master data? in general value for this should come from transactional data, or you could assign some constant value to it.
Do you want to use any attribute of Inoobject in report? And if you have any key value for that coming from Transaction data, you can use rule type as read from master data
It depends upon your requirememt.
Since you want to restrict the values of the cube which are going into the report then you should include this object into the cube.
In any case if you want to restrict the value of the transactional data in the cube with either the value of the objects ot the attributes of object you will have to add this object into the cube.
As you said you can load master data and use in report but how you are going to use it..............you will have to include it in the cube to use it.
Also you can check whether this object is attribute of some other object already in the cube in that case you can make it navigation attribute and then use it for the restrictions in the cube.
In this case only you do need to add it to the cube,But if it not an attribute of any object then you must add it to the cube.
You have to get the value of your infoobject into Cube from datasource, even though you want to use attributes only.
You will have to add it and it wont have any effect the transaction data getting loaded into the cube will be different from the master data only SID's are matched during loading of the data.
You should load separate master data into the 0recontract infoobject with the master data source and make the respective object contract type and contract category as navigation there.
Also you should add 0recontract to the cube and update it from the transaction data source as you have said that it can be updated.
Then just do the normal restrication at the report level
You can make this display attribute as naviagatioonal first in the master data object and then in the cube make this attribute as navigational.
then you can use it to restrict in the cube
You can use Category as InfoObject in your cube, and while loading data for your infoobject in the rule type you can use option as reading from master data. It will take key of infoobject, and will update attribute value in your cube.
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/f913426908ca7ee10000000a1550b0/content.htm
You can also restrict with attributes value, Just in the restrcition of your infoobject in query designer, slelect left-botton button of 'Dipaly Other Values', here you can select you attribute and its value for restriction as well
Regards,
Hareesh

Best practices for loading apo planning book data to cube for reporting

Hi,
I would like to know whether there are any Best practices for loading apo planning book data to cube for reporting.
I have seen 2 types of Design:
1) The Planning Book Extractor data is Loaded first to the APO BW system within a Cube, and then get transferred to the Actual BW system. Reports are run from the Actual BW system cube.
2) The Planning Book Extractor data is loaded directly to a cube within the Actual BW system.
We do these data loads during evening hours once in a day.
Rgds
Gk

Hi GK,
What I have normally seen is:
1) Data would be extracted from APO Planning Area to APO Cube (FOR BACKUP purpose). Weekly or monthly, depending on how much data change you expect, or how critical it is for business. Backups are mostly monthly for DP.
2) Data extracted from APO planning area directly to DSO of staging layer in BW, and then to BW cubes, for reporting.
For DP monthly, SNP daily
You can also use the option 1 that you mentioned below. In this case, the APO cube is the backup cube, while the BW cube is the one that you could use for reporting, and this BW cube gets data from APO cube.
Benefit in this case is that we have to extract data from Planning Area only once. So, planning area is available for jobs/users for more time. However, backup and reporting extraction are getting mixed in this case, so issues in the flow could impact both the backup and the reporting. We have used this scenario recently, and yet to see the full impact.
Thanks - Pawan

Error in viewing successfully loaded data into cube..

hi gurus,
I had a problem on viewing my data into cube. These data were successfully loaded from LIS environment. The errors i had received were 'Your user master record is not sufficiently maintained for object Commodity and Company Code Auth object'..'System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZFIN___ ZFIN___'... 'System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZFIN____ 64' ... 'System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZFIN____ 64 ...
Does anybody encounters these errors? Can you give me step by step procedure on how to deal on this errors?

This thread will solve your problem. look for Bhanu's post in it.
Re: Cube Security

How can data in cube will update after Master data changes

Hi,
We have a Revenue cube which we are loading actuals after every month.
Now we have master data changes at profit center level. Profit center is moving from Holdings to Power, effective with October reporting. So master data we updated accordinglt now we need to update data in cube.
I want know how can we update all the data in cube without dropping and relaoding again.
We have DS0s first then cube.
Please let me know available options.
Thanks
Sivaprasad

Hi,
Make the field which stores data whether it is holding or power as navigational attribute of profit centre.
So whenever master data changes just update profit center master data . Use this nav attribute in reports.
So whenever master data changes report changes automatically.
If you want time dependant 2008 to 2009 Holdings then 2007 power enable profit center time dependant master data.
Hope it helps.
Thanks,
Arun

How to load image data into cube?? Is it possible??

How to load image data into cube?? Is it possible??
Any sugession??

Hi Andre,
Document will be of ASCII characters right?? but image data will be in binary format. as per database concept it is stored as binary large object. But in datawarehousing the back end is also going to be some database such as Oracle or other DBs.
which can take blob's. so it would be possible to store the binary data.
If any one has faced this situation can reply.to this ques.
can post the step to load image(jpg/bmp or any image format) data in to info cube??
hi andre if u have done loading image data as you say.pls reply me if you have the steps with you.
thanks Andre

Loading data from Cube to ODS

Hi All,
I have a cube which contains projects data. I want to load the data from cube to a write optimized ODS. In the cube for a project i have multiple records. But while loading the data to ODS, I have to summarise the data in such a way that i should have one record for a project i.e if the cube has data as follows:
Project Cost
abc      100
abc       200
abc       300
Then in the ODS the record should be
Project    Cost
abc        600
How do i achieve this ?
Thanks,
Satya

Hi Satya,
Generate export datasource from Cube ( Right click on cube ->generate export datasource).
Create update rules for the ODS and in the update rule of Cost , you will find two options
1. overwrite
2. addition.
Choose addition and activate update rules. ..This will work exactly same way you wanted.
One more thing to mention ,Put project info object in to key fields of ODS and rest all info objects in to data fields.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.
Message was edited by:
        Mr Kapadia

While loading transaction data into cube what are the tables generats

Hi,
while loading transaction data into cube what are the tables normally generats.

Hi,
Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
When you do compress the request the data will be moved into E tables.
Regards,
Siva.

Getting error in PSA while trying to load data in cube

Dear Friends,
I am trying to load data in cube I am getting error in PISA i.e.
Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .
please guide me.
Thanks in Advance.
Best Regards
Rafeeq

<i>Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .</i>
Your data is in lowercase.. either change the data to UPPERCASE from source..
or delete the request in cube and edit PSA data from lowecase to UPPER CASE if they are few records only.
or make the infoobject setting lowecase checked,
Regards
Manga(Assign points if it helps!!)

Can we show some user defined message while cube loading in OBIEE

Hi All,
Currently we are building OBIEE dashboards from Essbase ASO Cube as datasource.
During Essbase Cube loading ,Essbase will "Disable all Administrative Commands".In this mean time,When users are trying to run the dashboards,OBIEE will thorws severe error.
Can we dispaly some user defined message something like "Cube is loading.Please wait...." or any other alternative.
Time taken to load the cube is 1hr.Please suggest
Thanks,
SatyaB

Yes, You can better try replacing the whole OBIEE dashboard with a custom message. Whenver the load happens...you shud trigger or set a flag value to 'Y'. Using guided navigation when Flag value is matched to Y...right a JS to replace the whole dashboard.
[html]
[head]
[script type="text/javascript"]var strStatus="@1";
if(strStatus =='Y')
location.replace('saw.dll?PortalPages&_scid=in6lPJnWWNk&PortalPath=/shared/Framework/_portal/Cube%20Status%20&Page=Cube%20Status');
[script]
[head]
Replace square bracket with curly brackets in above replace code..
BTW, you shud mark the previous post on Implicit fact. Follow https://forums.oracle.com/forums/ann.jspa?annID=939

Reg:loading data into cube getting error

Hi,
When i am loading data intothe cube i am getting following error.
record1:fiscal year variant not expected.
error 4 update.

Recently, I experienced following error:
fiscal year variant K4 not expected.
following process fixed my issue
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Also check the following-------
in R/3 (SE16), make sure K4 exists in table T009
in Bw, select source system --> transfer global settings

Can compresed data in cube load upward.

Similar Messages

Maybe you are looking for