Can connect over wlan, but not using ethernet cable between mac and extreme

Hi, I have a brand new Airport Extreme base station. Wireless LAN works well and both my wife's and my Mac can connect to the internet. When I connect the ethernet cable to my macbook, it does not connect to Extreme. Is this a feature or a required change in the setups?
br
Vesa

vesaw, Welcome to the discussion area!
On your MacBook, open System Preferences-> Network preference pane and ensure that Ethernet is enabled.

Similar Messages

Can connect via wifi but not by ethernet cable?

Hi,
I'm a bit confused here.
I have an airport express which works fine and I just bought an airport extreme.
The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
Both airport express and extreme are lit up green and they both appear on the Airport Utility.
The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
Any help is much appreciated!

The airport extreme is connected to the modem by an ethernet cable
On the WAN plug, right?
and the airport express is connected by ethernet cable to the airport extreme.
Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
http://support.apple.com/kb/HT1515?viewlocale=en_US

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Can connect to appstore but not can't download songs or music albums

can connect to appstore but not can't download songs or music albums in mp3.

Sorry, but music tracks and other media contact are not available in Israel via an iTunes Store at this time. None of us here can say when Apple will be able to obtain the necessary licenses and feel it worthwhile to set up an iTunes Store for your country.
Regards.

HT201413 I can sync my contacts but not my calender with iphone 4 and outlook 2007 for windows XP. It was working OK up to a month ago

I can sync my contacts but not my calender with iphone 4 and outlook 2007 for windows XP. It was working OK up to a month ago

I found this link:
http://xlii.be/2011/10/how-to-get-icloud-windows-xp-and-outlook-to-work-together /
Hope it helps some other noobies like myself.

I'm able to connect via wifi but not via ethernet

I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

My mac mini will connect via airport but not via ethernet.

I have had a mac mini for several months which I connect via ethernet because it is in a part of my house where the wireless signal is poor. I changed ISP and now I can connect to the router wirelessly but not via ethernet. This doesn't seem to be a problem with the network as the connection works when I connect it to my mac book. Firewall is turned off. There were no major changes to the router settings other than changing the ISP login codes.
Any ideas? Is this a configuration issue or a hardware problem?

Hi Mick,
If your router only supports 10/100 ethernet then it is possible that the auto-detect feature is not working properly to adjust to that speed. The mini has a Gigabit ethernet port. The OS by default sets the port to automatically negotiate the rate but it does not always work and the result is the problem you are having.
To fix it you wlll have to manually set the rate to 100.
To do this, open your system preferences, Select Network. Highlight the ethernet port on the sidebar, click the advanced button. Click on the Ethernet Tab, set the configure pop-up menu item to 100baseTX and click the ok button. If all works out you should see that the Ethernet port icon should turn green.
Hope this helps.

Help - Can Connect to Router but not Internet

I just upgraded to a new hard drive. After reinstalling Windows XP, I tried to connect to my router (WRT54GS) which is working fine, but can't connect to the internet. This is a second laptop (first still connected to internet just fine). I've tried connecting directly to the router via ethernet cable and wirelessly, but can't connect to the internet either way. I'm looking for any advice on how to resolve! Thanks!!

Connect the computer to the router .... access web interface of the router ....
Look for MAC address clone sub-tab .... under setup tab .... click enable & clone ..... click save settings ....
Go to status tab ..... look for internet ip address ....
Do power cycle ....
Check if you are online or not .....

I can connect to WiFi but not the internet

I am trying to connect a new IPad 2. I have a Belkin router that is B+G+N. I use WPA2 encryption and MAC filtering. The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email. When I type any URL in Safari it takes me to my router's management page. In fact I can log into my router and manage it from my IPad but I can't connect to anything else. I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's. This has me baffled.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can connect to skype but not internet, running snow leopard

Moved to new house; was able to connect to internet with firefox first day; after that can get on Skype but not internet. Is it my computer or the wireless router in the house? what should I do?

This is all I could find on the topic, but it doesn't resolve my issue:
http://docs.info.apple.com/article.html?artnum=106798
http://docs.info.apple.com/article.html?artnum=106797

Why does Time Machine not work over wifi but only via ethernet cable ?

Hi everyone,
It's been some time I have this problem now.
The first time I backed up my mac within Time Capsule with time machine, I chose to use the ethernet cable because the gigabit connection is much faster than the wifi for the first back up, but now, any time I want to update this back up, I need to connect the cable, cause "Time Machine can not connect to the Drive I picked" over wifi.
This is so annoying. Does anyone have a similar issue ?
Any solution ?
When I got this "error" I can use Utility Airport and get full access to the drive, even in finder. The only thing that doesn't work is TimeMachine connecting to the drive, even if it is detected by TimeMachine itself.
Thanks.
Riccardo

Typical Yosemite.
I suggest a full reconfigure of the TC.
Follow this list..
No files are deleted on the TC doing this although you might have to repoint your laptop to the backup.
Note.. even if TM does connect it will say it is going to do a new backup.. it is only when it starts that it discovers the backup exists and increments it.
Start from a factory reset. No files are lost on the hard disk doing this.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 for basestation and and TCwifi wireless name.
If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Can connect to network but not internet

In trying to secure my wireless network, I connect to my network, but I am unable to get to the internet with the wireless security enabled. I have no problems connecting over the wireless when I disable the security.
I have a linksys broadband router.
I use a Mac book with intel chip that I am trying to connect wirelessly. I also have an older imac that is connected directly to the router that I was trying to share files.
I was trying to setup WEP- I know very little about network protection. I have had a router for a couple of years and when I was trying to set it up so I could share iles I realized it was not protected. At the linksys website I had several options, but experienced the same problem (I had a strong network connection, but unable to connect to the internet) no matter which encryption option I chose.
The error meeaage says that is unable to connect
Thanks

Hi.
I assume that you have a linksys router plugged into an airport express.
First off, seeing as you have a macbook you should use WPA2 instead of WEP as it is more secure. You can select this option in the airport admin utility on the main page. Make up a password enter it and click apply. The express will update. Then, when you select your network from the airport icon on the top of your screen it will prompt you to choose the type of security on the network (which will be WPA2 and after selecting this it will then propmt you to enter the password. Enter the password again (checking the keychain box as well) and this should be it.

Able to connect via airport but not via ethernet since fresh install

New format and reinstall of OS X. Software update to 10.4.5. Now I need to use ethernet and I get an error. I did NOT have ethernet attached when doing the install.
This used to work before the reinstall. I have tried different cables and different ports attached to the D-Link router (I use DSL).
Other computers on the net (iMac G5 via ethernet and Windows via Wireless) have no problems.
I have tried the network assistant, renewing DHCP lease (which does not work), manual config, ifconfig up and down and even tried to reapply the 10.4.5 update but to no avail. I have even rebooted (Ugh) several times.
system log:
Mar 12 19:17:04 Mach1 lookupd[70]: lookupd (version 369.2) starting - Sun Mar 12 19:17:04 2006
Mar 12 19:17:06 Mach1 mDNSResponder: Adding browse domain local.
Mar 12 19:17:07 Mach1 kernel[0]: ATY,ChockStone_A: vram [a0000000:10000000]
Mar 12 19:17:07 Mach1 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Mar 12 19:17:07 Mach1 kernel[0]: ATY,ChockStone_B: vram [a0000000:10000000]
Mar 12 19:17:08 Mach1 loginwindow[118]: Login Window Started Security Agent
Mar 12 19:17:10 Mach1 kernel[0]: AirPort: Link Active: "UfiBase" - 001346a5c8fa - chan 6
Mar 12 19:17:10 Mach1 configd[34]: SecKeychainFindGenericPassword err= -25308 ( =0xffff9d24, secErrStr=User interaction is not allowed. ) (current= UfiBase)
Mar 12 19:17:13 Mach1 configd[34]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Mar 12 19:17:13 Mach1 configd[34]: posting notification com.apple.system.config.network_change
Mar 12 19:17:13 Mach1 lookupd[151]: lookupd (version 369.2) starting - Sun Mar 12 19:17:13 2006
Mar 12 19:17:15 Mach1 configd[34]: target=enable-network: disabled
Mar 12 19:17:25 Mach1 kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
Mar 12 19:17:25 Mach1 configd[34]: posting notification com.apple.system.config.network_change
Mar 12 19:17:27 Mach1 mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Mar 12 19:17:35 Mach1 lookupd[206]: lookupd (version 369.2) starting - Sun Mar 12 19:17:35 2006
Mar 12 19:18:03 Mach1 kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Mar 12 19:18:03 Mach1 configd[34]: DHCP en1: RELEASE transmit failed
Mar 12 19:18:09 Mach1 configd[34]: posting notification com.apple.system.config.network_change
Mar 12 19:18:09 Mach1 lookupd[281]: lookupd (version 369.2) starting - Sun Mar 12 19:18:09 2006
Mar 12 19:18:37 Mach1 kernel[0]: AirPort: Link Active: "UfiBase" - 001346a5c8fa - chan 6
Mar 12 19:18:37 Mach1 configd[34]: SecKeychainFindGenericPassword err= -25308 ( =0xffff9d24, secErrStr=User interaction is not allowed. ) (current= UfiBase)
Mar 12 19:18:40 Mach1 configd[34]: posting notification com.apple.system.config.network_change
Mar 12 19:18:40 Mach1 lookupd[285]: lookupd (version 369.2) starting - Sun Mar 12 19:18:40 2006
What now? - I really don't feel like reinstalling with en0 connected just to fix this
Thanks for any advice

I would attempt to find a Windows machine to set it up as Samsung's Mac software is abysmal.
However I have found this step by step on an Amazon review, I don't know if it will work:
1. Setup the physical printer machine according to manual. Then connect it your Macbook via USB. Make sure the printer is powered on and verify the Macbook is powered on with wireless network Access.
2. Insert the supplied software CD and double click on the CD from your desktop.
3. Double click and execute to Mac_installer folder >Installer OS X icon.
4. Complete the license agreement and installation steps.
5. This will be a standard install without the wireless option. This is your only option. You will not be given a chance to do the wireless installation like in the Windows version install.
6. Enter in the admin password to install the software.
7. Once the software confirmation screen pops up to confirm your installation was successful, proceed to DISconnect your USB connection to you Samsung Printer.
8. In case you missed it, Disconnect the USB connection between your Samsung printer and Macbook.
9. Navigate to Applications > Utilities >Print Setup Utility (For Mac OS X 10.5 - 10.7) Navigate to Applications > System preferences > Print & Fax.
10. Click Add on the printer list (For Mac OS X 10.5 - 10.7, click the PLUS sign) and new display will pop up.
11. On the "Default" Tab of the pop up display, select or highlight the Samsung printer. In the printer name column, it should be listed as "Samsung ML-2160 Series (NNNN)", then in the Kind column, It should be listed as "Bonjour"
Note: DO NOT select the Samsung Printer with the "USB" in the Kind column. This Samsung printer - USB option should only be selected if you intend to print from USB.
12. Click ADD, then select continue to create the print queue.
13. Now open up any word document with text and print a test page.

Can connect to router but not internet, please help!

I was searching, but couldn't find a thread with my symptoms...please redirect me if needed.
however, I just got a brand new dell that is running vista premium, and I put my belkin wireless card that I was using in my old pc into the new one. found my network, applied to wep key and connected to the router without any problem...
but I can't go online! I never had a problem before, and I am using the same wireless card. my signal is excellent, so what might my problem be? I already tried rebooting the router, but no results. I had the same problem several months ago with my wife's laptop when we first got FIOS...but for the life of me I can't remember how I fixed it.
any suggestions? thank you so much in advance

It sounds like your laptop doesn't have any - or the right - IP configuration. When you went through the network setup, did you tell it to use DHCP?
Some things to try (note, this is for XP but I'm guessing it hasn't change *too* much for vista):
From a command window, try typing:
ipconfig
It should show you your IP address and a default route (something other than zeros, probably a 192.168.x.x address).
If you don't get a valid IP and route, try running: ipconfig /renew
See if you can get to the router by pinging the default gateway address (from the ipconfig command). E.g.:
ping 192.168.0.1
If you still have no luck, try resetting the connection via the Network Connections panel:
Start->Control Panel
Double click Network Connections
Check for DHCP:
   Right click on the wireless connection and select Properties
   Click on Internet Protocol(TCP/IP) and click Properties
   Make sure that "Obtain IP address automatically" is selected.
   Click OK in both boxes.
Right click on the wireless connection and select Repair
If it still doesn't work, try right clicking on your wireless connection and select Disable, then again and select Enable and then Repair.

Can connect at home but not at school

My macbook pro has no problem connecting to my airport extreme at home and to a netgear router at my mom's house, but when I go to school I can't connect to the wireless internet there. It shows the network as available and asks me if I want to join it as soon as I turn my computer on. I click yes and after about a minute I get a message saying it was unable to connect to the wireless internet. One of my teachers has the exact same MBP and connected his computer sitting right next to mine. I tried checking the internet settings compared to his and the only difference was that he was getting an ip address and I am not. Users are supposed to connect then start their browser and are re-directed to Trapeze to enter a login and password. I open safari and firefox and am never re-directed to this site. We tried putting in the server address and that did not connect either. Please help! I already get a load of crap from everyone there for loving macs and they are teasing me every week about not being able to connect to the internet!
17" MacBook Pro 2.33 Ghz Intel Core 2 Duo Mac OS X (10.4.9)

I think this may be a trapeze bug, I support a wireless network at a university that sounds very similair to the one you're describing. Over the last few weeks we've seen several user with new mbp's having the exact same issue, they see the network but after thinking about joining it for a few minutes they simply state that there is a problem witht the network and refuse to join it. These macs will join home networks without problems it is just our trapeze wirless network they are struggling with.
Of course telindus say it's apples problem and apple say it's telindus's so we're not making much progress (I've resorted to reading the user forums on a friday night). Would be nice to know if any one stumbles on a fix.

Can connect over wlan, but not using ethernet cable between mac and extreme

Similar Messages

Maybe you are looking for