Can connect to exchange using eM Client, but not Outlook 2013

Hi There,
I have been using eM client to connect to an exchange server with no problems for months. The reason I chose eM Client was because it was free (ha) and it could sync my email, calendar and contacts using Exchange Web Services (EWS).
But then I decided to make the plunge and get myself an Office account so I could use Outlook. The problem is I just can't connect. I have to use a address in eM client that ends with ews/exchange.asmx to connect, but for there is no option
to that in outlook.
Thanks for any help.
Mike
(Also, in case I am in the wrong place, I was referred here after I posted @ answers.microsoft.com)

Hi Mike,
Is there any update on this thread?
As Ed mentioned, have you checked the settings of outlook anywhere ?
In addition, you can refer to the following article to configure:
Configure Outlook Anywhere in Outlook 2013
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Similar Messages

Connecting to Exchange works with Intel, but not PPC machines????

I work in an office with several Macs, Intel and PPC. Using Mail.app, we can connect fine to our exchange server with the Intel boxes, but the PPC machines have problems. Connection Doctor actually shows that you are connected, but you don't see anything in the Mail.app UI. The mailbox is grayed out. And if you try sending a message out anyway, it does go out and can be viewed via Web Access. The Mail.app configuration is identical, so the only differences I see are Intel vs. PPC and the version of Mail on Intel is slightly newer. Intel has Mail 2.1.1 (252.3) whereas the PPC machines have Mail 2.1 (252/252.2). All machines run 10.4.8.
Any thoughts?

Hey man I figured it out. If you have too many emails in your inbox its causing the server to timeout or something.
The solution is to move all the emails from your inbox to a temporary folder. Then move back only what you need. Within five minutes push was working for me again and my battery problem went away because it wasn't constantly trying to pull down email.

Can connect iPhone to friend's wifi, but not MacBook Pro. Says password is invalid.t

My friend gave me her wifi password so I can connect at her house. I onnected my iPhone with no problems. But when I try to connect my MacBook Pro I keep getting a message that the password is invalid. It's the exact same password I used to connect my phone! recently she had relatives visit and the same thing happened for them. What's up?

You would do better to ask in the Mac Forum - this is the iPad forum.

I can connect my lexmark printer by usb but not wireless

i can connect my lexmark printer s400 series by usb but not wirelessly any thoughts please

I'm having the same issue. On my MBP 15" OS 10.7.3 the Lexmark printer does not connect to WIFI. It works on the USB connection. In wifi however it will work on the Virtual Box Windows 7 partition.
In my logic this means the printer is properly connected to the wifi (green indicator and working with Virtual Box and Windows 7) The MBP is properly connected to the wifi network as Virtual Box works in the Mac's environment. The printer is present in the System Preferences indicating it is Idle and does have a IP address.
When I do send a document to the printer it just sits in the Que and in System Preferences the status goes to Busy. In the Que it also indicates it is busy until it tmes out and indicate that communication with the printer is a problem.
Thanks for any suggestions.

Can connect to DB via SQL plus but not Toad!

I have installed: 10GR2 on D drive on XP machine, on C drive i have toad and Dev suite 6i (for connecting to old db's). Now, I can sqlplus from command line no problem, but when I try to connect through toad it says no listener, I also cannot tnsping my 10G db. Any idea's?

steve contents of Devsuite tnsnames are here: the 10G db is LOCAL
LOCAL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = weres09023)
(PORT = 1521)
(CONNECT_DATA =
(SERVICE_NAME = LOCAL)
EISPATCH =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = rmerptest)
(PORT = 2011)
(CONNECT_DATA =
(SERVICE_NAME = EISPATCH)
MKPEURT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = KARL)
(PORT = 1521)
(CONNECT_DATA =
(SID = MKPEURT)
MKPEUR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = BARNEY)
(PORT = 1521)
(CONNECT_DATA =
(SID = MKPEUR)
UAT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = rmdbtest)
(PORT = 1800)
(CONNECT_DATA =
(SID = UAT)
DEV11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = drerptest)
(PORT = 1700)
(CONNECT_DATA =
(SID = DEV11)
PROD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = rmdbprod)
(PORT = 1600)
(CONNECT_DATA =
(SID = PROD)
UPGD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = rmdbtest)
(PORT = 2200)
(CONNECT_DATA =
(SID = UPGD)
which net manager? the 10G home or the Devsuite home?

ADRMS Server 2012 with exchange 2010, I have created some new templates, they are showing up in owa but not Outlook 2013

I cannot figure out why my templates do not show up in Outlook, when I manually update the AD RMS task scheduler to run the templates get pulled and placed into the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates
but when I launch outlook they are not displayed.
Has anyone encountered this type of problem before?

Hi,
Generally, the default Outlook Templates (.oft) is located in drive:\Users\<username>\AppData\Roaming\Microsoft\Templates.
Firstly, please make sure the Templates have been located in the C:\Users\%%\AppData\Local\Microsoft\DRM\Templates path of your local machine. If it is there, please copy and paste the new Templates to the default Outlook Templates location.
Then we can right-click the Folder to select Properties in Outlook, and click dropdown next to "When posting to this folder, use:" and select the custom template form in the list. For more information about Outlook Templates, please refer to:
https://support.office.com/en-au/article/Save-time-with-templates-in-Outlook-8990002c-b3d7-4fc0-a4f4-4f2f94643aa7
Regards,
Winnie Liang
TechNet Community Support

I cannot click on tabs in any website, do you know why? I can do it when using Internet Explorer but not firefox.

I have used Mozilla Firefox for years, but all of a sudden I cannot put my curser over a tabs on any website and click on it. What I mean is the top of the websites have words you can click on to go to other pages or in the email system it has tab buttons that allow you look at your inbox or close or save draft, it doesn't allow the curser to click on it. I can go to the tool bar put my curser in that and use the tab button on the key board to tab over to each word or link and then click enter and it will then go to that next page.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can connect to local DB via SQLPlus but not via SQLDeveloper, all info incl

Have a database running on a new local Windows 7 Professional Machine with data, users, etc from an db import. Able to access database via sqlplus, run queries, etc. Cannot run from Oracle SQL Developer. Trying to use Connection Type Basic, Hostname localhost, port *1521*.
Using SID = xe I get:
Status: Failure -Test failed: Listener refused the connection with the following error: ORA-12518, TNS:listener could not hand off client connection The Connection descriptor used by the client was localhost:1521:xe
When I add a service in my listener.ora file for sid_name=xe and program_name=xe (which I include below), I get
ORA-12518, TNS:listener could not hand off client connection. The connection descriptor used by the client was localhost:1521:xe
Using Service name = xe I get:
Status: Failure -Test failed: Io exception: the Network Adapter could not establish the connection.
Here's every single piece of information I think you may possibly need to help me with the issue. [I've been trying to find the solution on these forums so I hope I haven't messed my settings up even more than they had been before.]
TNSNAMES.ORA (XE is the name of my local database):
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(service_name = XE)
(SERVER = DEDICATED)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = XE)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
C:\Windows\system32>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 25 19:36:15 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select sysdate from dual;
SYSDATE
25-APR-10
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Produ
ction
C:\Windows\system32>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2
010 19:43:02
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos
t)(PORT = 1521)) (CONNECT_DATA = (service_name = XE) (SERVER = DEDICATED)))
OK (20 msec)
C:\Windows\system32>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2010 19:46
:20
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XE" has 1 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:10
LOCAL SERVER
The command completed successfully
Edited by: user1966631 on Apr 25, 2010 4:59 PM

Got it. No, no virtualization. Just Win7 64-bit computer running XE.
C:\Users\Gil>sqlplus ccxreg/ccxreg@XE
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 25 21:23:20 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
listener.log
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2010 19:54:10
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=760
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-APR-2010 19:55:46 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=null))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51031)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:11 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51040)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:18 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51043)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:31 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51048)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:34 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))(SERVICE_NAME=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51050)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:37 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51052)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 20:42:45 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=null))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=52547)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 20:43:08 * (CONNECT_DATA=(SID=@xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=52558)) * establish * @xe * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
25-APR-2010 20:43:13 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))(SERVICE_NAME=@xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=52562)) * establish * @xe * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
25-APR-2010 21:03:00 * ping * 0
25-APR-2010 21:03:17 * ping * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2010 21:06:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=6836
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-APR-2010 21:06:11 * service_register * CLRExtProc * 0
25-APR-2010 21:06:11 * service_register * CLRExtProc * 0
25-APR-2010 21:06:11 * service_update * CLRExtProc * 0
25-APR-2010 21:07:04 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=null))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=53945)) * establish * xe * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
25-APR-2010 21:07:55 * service_update * CLRExtProc * 0
25-APR-2010 21:09:35 * service_update * CLRExtProc * 0
25-APR-2010 21:11:15 * service_update * CLRExtProc * 0
25-APR-2010 21:12:55 * service_update * CLRExtProc * 0
25-APR-2010 21:14:35 * service_update * CLRExtProc * 0
25-APR-2010 21:16:16 * service_update * CLRExtProc * 0
25-APR-2010 21:17:56 * service_update * CLRExtProc * 0
25-APR-2010 21:19:38 * service_update * CLRExtProc * 0
25-APR-2010 21:21:21 * service_update * CLRExtProc * 0
25-APR-2010 21:23:02 * service_update * CLRExtProc * 0
25-APR-2010 21:23:20 * (CONNECT_DATA=(service_name=XE)(SID=XE)(SERVER=DEDICATED)(CID=(PROGRAM=C:\oraclexe\app\oracle\product\10.2.0\server\bin\sqlplus.exe)(HOST=WIN7X64)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=54388)) * establish * XE * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
25-APR-2010 21:24:43 * service_update * CLRExtProc * 0

Can connect to Snow with MacBook Pro but not G4

I have used my G4 with the airport for a long time. I recently got a MacBook Pro and it connects in fine to the ABS. Both worked connecting to the ABS for a few months. Suddenly, the G4 quit recognizing the ABS. Nothing I do allows it to find it. Could there have been a software update that caused this? There was a thunder storm, but no recognizable issues on the G4, everything seems to be fine...except it doesn't see the Airport.
Thanks in advance for any ideas.
Larry
G4 Mac OS X (10.3.9)

try unplugging your broadband modem and ABS for a short time and plug them back in.

Can video chat with Imac non-intel but not with Powerbooks

Hi,
I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
Is there anything else I can do?
Please help. Thanks.

Hi cmbell,
Do you know how to access your modem ?
This should give you somewhere to turn off DHCP.
Then you go to System Preferences > Network and select the connection method you are using.
Then select the TCP/IP tab.
In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
Type the IP you wish to use in the next entry field.
Copy the subnet mask form the Using DHCP
Copy any DNS servers listed.
Copy the router IP address which will be the modem or router in question.
Hit Apply.
Done.
9:23 PM Sunday; May 7, 2006
Message was edited by: Ralph Johns (UK)

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

I was wondering if there's a way to connect to my work server from my home iMac i7. I can't seem to get Share Screen to work. I have tried connecting to server using the vnc but doesn't work.

The easiest way would be to use Back to My Mac, but that will only work if the server is a Mac running OS X 10.7 or later and you have the cooperation of the network administrator.
OS X: Using and troubleshooting Back to My Mac with your iCloud account

Connection ... able to connect using sql developer, but not sqlplus or toad too

Hi folks, having this issue, with only one of my so many databases, what might be the reason and how to fix/correct this, please assist.
Able to connect using sql developer, but not sqlplus or toad too; sqlplus error: ORA-12154: TNS:could not resolve the connect identifier specified
thanks in advance.

SQLDEVELOPER works since it use JDBC Thin & does not use tnsnames.ora
ORA-12154 ALWAYS only occurs on SQL Client & no SQL*Net packets ever leave client system
ORA-12154 [B]NEVER[/B] involves the listener, the database itself or anything on the DB Server.
ORA-12154 occurs when client requests a connection to some DB server system using some connection string.
TNS-03505 is thrown by tnsping & is same error as ORA-12154 thrown by sqlplus or others.
The lookup operation fails because the name provided can [B]NOT[/B] be resolved to any remote DB.
The analogous operation would be when you wanted to call somebody, but could not find their name in any phonebook.
The most frequent cause for the ORA-12154 error is when the connection alias can not be found in tnsnames.ora.
The lookup operation of the alias can be impacted by the contents of the sqlnet.ora file; specifically DOMAIN entry.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1]
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Using Outlook (2010 & 2013) to connect to Exchange using EWS

First things first.
I know that Outlook on the PC platform uses MAPI to connect to Excahnge while the Mac flavor of Outlook uses EWS, however, i was cycling through some available EX and ExO PowerShell cmdlets and found a parameter for set-casmailbox named EWSAllowOutlook Which
leads me to believe that configuring this setting should allow Outlook to use EWS to connect to Exchange. (This is a separate parameter from EWSAllowMacOutlook).
I tried a manual configuration (entering in the EWS url and setting the correct Outlook Anywhere settings) with no success.
I also tried manual configuration of an outlook.com and activesync account and entering the EWS URL as well with no success.
Has anyone successfully configured Outlook for PC to connect to Exchange using EWS and how did you configure the client?
Thanks

Hi,
Sorry for the late reply.
About the EWSAllowOutlook parameter, I have something to clarify.
This parameter allow or disallow Outlook 2007 to access EWS for the user.
Outlook uses EWS for free/buzy, OOF settings, and calendar sharing.
Outlook connect to Exchange server by using MAPI is a by design behavior.
We cannot change this.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

Try changing the channel in use in case you're getting interference.
If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
mrtotes

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?

Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.

Can connect to exchange using eM Client, but not Outlook 2013

Similar Messages

Maybe you are looking for