Can connect to network, but not to internet

I have a wireless network set up with four macs connecting to it. Three of the macs can connect to the network and access the internet.
My Black Macbook can connect to the network, but when I open Safari or any other program that connects to the internet I cannot actually get on the internet. For example, I open safari and after a few minutes it says I am not connected to the internet.
I can connect to my neighbor's unprotected wireless network and have no problem getting on the internet with that connection.
I have tried turning the computer off and on and turning the airport off and on and it does not solve anything. I did not do anything to the compueter, it just started this problem out of the blue.
Any ideas on how to fix this?

Do you have IP address limits ? Say I have 5 IP
addresses limit.
That is not it. And, I did not change anything before it just stopped working. The strange thing it is only within my wireless network that I can't access the internet. I eventually get the "you are not connected to the internet" screen each time I try to bring up a web page.

Similar Messages

I can connect to WiFi but not the internet

I am trying to connect a new IPad 2. I have a Belkin router that is B+G+N. I use WPA2 encryption and MAC filtering. The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email. When I type any URL in Safari it takes me to my router's management page. In fact I can log into my router and manage it from my IPad but I can't connect to anything else. I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's. This has me baffled.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

New Macbook Pro Connects to Network but not to Internet

I just got a new Macbook pro and I transferred everything from my old macbook pro from a timemachine backup. The internet works fine on my old macbook pro (running 10.5.8) but if I turn on the airport in my new macbook neither machine can connect to the internet. It also makes the internet stop working on my roommates pc. All machines can see the wireless network, just not the internet. Tethering from iPhone works fine.
I've given both macbooks separate ip addresses. Restarted the modem. Run network diagnostics (the server and internet dots are yellow), deleted all other saved networks and restarted, but none of that is working. The new Macbook keeps crashing our internet connection.
Any ideas?
Thanks

You transferred your network PPC connection to your Intel OS X. Go to the blog How I fixed my dropping wireless Airport connection problem in Snow Leopard and follow there steps in resetting the preferences for the Airport card.
If the non of these steps work, take it to Apple ASAP.

Can connect to router, but not to internet

About a week ago, my whole wireless setup stopped working. I have a BEFW11S4 v.4 router and a WPC54G v3 notebook adapter. I tried the hard reset on the router and taking to security off the wireless. I can connect to the router, but not the internet. What am I doing wrong? I can connect directly using the DSL modem.

If you are getting Ip address in the range of 192.168.1.X ....with gateway 192.168.1.1 .... change the Local Ip address to 192.168.2.1 ...click save settings ....
Do power cycle .....& see if you are online or not ....

Can connect to network but not internet

In trying to secure my wireless network, I connect to my network, but I am unable to get to the internet with the wireless security enabled. I have no problems connecting over the wireless when I disable the security.
I have a linksys broadband router.
I use a Mac book with intel chip that I am trying to connect wirelessly. I also have an older imac that is connected directly to the router that I was trying to share files.
I was trying to setup WEP- I know very little about network protection. I have had a router for a couple of years and when I was trying to set it up so I could share iles I realized it was not protected. At the linksys website I had several options, but experienced the same problem (I had a strong network connection, but unable to connect to the internet) no matter which encryption option I chose.
The error meeaage says that is unable to connect
Thanks

Hi.
I assume that you have a linksys router plugged into an airport express.
First off, seeing as you have a macbook you should use WPA2 instead of WEP as it is more secure. You can select this option in the airport admin utility on the main page. Make up a password enter it and click apply. The express will update. Then, when you select your network from the airport icon on the top of your screen it will prompt you to choose the type of security on the network (which will be WPA2 and after selecting this it will then propmt you to enter the password. Enter the password again (checking the keychain box as well) and this should be it.

Can connect to network but not internet. Please Help!!!!!!!!!

I have a Thinkpad T-60p and have encountered a serious problem; I am unable to connect to the internet. The Thinkpad will recognize and connect to wireless networks but when I go to actually open a webpage it does not open. I spent hours troubleshooting the problem to no avail. My other laptop connects to the internet fine, so I do not think it is an issue with my router or modem. I also went to my neighbors and I was unable to connect to the internet even though I could connect to his network; once again my second computer does not have a problem. I tried what I could in the Thinkvantage wireless software but I am not that familiar with it. When I use the test connection option it just reads, “unable to connect to internet” but I have a strong signal to my network. I then tried a wired connection directly to my cable modem and my neighbors; once again it showed that I have a connection, but still will not connect to the internet. I tried disabling my Firewall and Virus software and still could not connect. I have shutdown, unplugged and reset everything. I still receive the same results. I am not sure what has happened, I have not installed any new software or hardware recently. The computer has been working great up until this morning. I ran my virus software and a free online scan as well, nothing had been detected. I called tech support and they said it was a software issue to either pay $100 for help or post in the forum. The only other option I can think of is a complete systems restore, which I am trying to avoid. Anyone have any suggestions?
Please Help,
P.

ConnectDon wrote:
Perhaps the domain names are not resolving properly. Instead of http://lenovo.com, try http://64.26.254.19, which is the numerical address for lenovo.com. If you see the Lenovo home page, it will point us in the right direction.
Don
I will try that when I get home from work, thank you for the advice. However,I did notice that when it attempts to connect it shows the IP Address in the IE window bottom left corner. In the past it would always read connecting to "website name" but since the problem started it shows the IP address instead of the actual name.

Can connect to wifi but not to Internet

I had the problem that iPad2 suddenly could connect to wifi, and to 3G for that matter, but got an error trying to acces the Internet (from Safari or mail).
Tried for hours all the advice foud here and other places, like resetting this and that.
I had a feeling that it was something blocking on the iPad, not a router problem - all other devices could connect to Internet.
The solution: I had disconnected Dropbox! - Connecting to Dropbox again solved all problems. Now it's even possible to disconnect to Dropbox without getting problems with Internet access.
The lesson learned from this: apps can hang up Internet-connection, though they are not even using it!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can connect to Wifi but not LAN internet with iphone 6

Hello from Australia.
Ever since I brought my iphone 6 home, I have been plagued with Wifi issues. All of my idevices have lost internet connection, even though they can be connected to WiFi via Airport Express (2nd gen).
My internet is a LAN ethernet cable, and usually after connnecting to WiFi (on any device), I get a Login Page from my ISP and I can connect to the internet as usual.
The new iphone 6 has never been able to bring up the Login Page, but is able to connect to my WiFi network. My old 4S is also unable to connect, as well as my husband's 4S.
Can anyone help?
Thank you.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can connect to airport but not load internet page

I can connect my PS3 and window based laptop to my airport network, as both show successful connection, but I can not load internet page on either the PS3 or the laptop. My airport network is not protected. My airport base station is about 7 years old.

Well the symptoms now point to a number of issues that need to be eliminated and they are you need to check that you are logged onto the ISP. For always ON systems this is usually a function of the Router in which case you need to log onto the Router and check the appropriate settings for this function also release the lease on the IP address and reboot the Router. The other issue is that the Router may not have access to the ISP which may cabling problem [disconnected or accidently damaged cable] within your environment of a service problem within the ISP domain. Check with a neighbour who is subscribed to the same Exchange as you are to see if they have problems otherwise call your Service Provider they may have to perform a reset on their end of your connectivity. Good luck
Message was edited by: adnixon

Can connect to airport but not always internet!!

We have up to 6 Wi-Fi devices in the house and for some reason only about two can connect to the airport at one time. We have road runner from TWC and I have called them and they said that the modem was working fine and reset it from their office. They said that the router AEBS was messed up. I've tried to reset all the settings and it worked for a little while, but then returned to it's old ways again. What's wrong? Am I missing something. This has been majorly stressful! FYI We have a Powerbook G4, MacBook, HP Desktop, Vaio Laptop, and 2 iPod touches.

I have reset my airport this was the second time i was toying with it all last night. I was able to get on the little website for our modem so I disabled that firewall and turned off it's wireless capabilities and a few other odds and ends. And then I redid all of airport. Now though I get an unresolved problem status with "Double NAT" it says and I quote that "This base station has a private IP address on it's ethernet WAN port. It is connected to a divece or network that is using Network Address Translation (NAT) to provide private IP Addresses. You should change your base station from using DHCP and NAT to bridge mode." I ignored it because it seemed to be working last night fine with all of our devices on at the same time. but then again last time I reset it, it worked fine for about 3 days and then went to it's old habits.

CONNECTS TO NETWORK BUT NOT TO INTERNET

Hello, PLEASE HELP
we are trying to get my wife’s computer connected to the internet.
We have an Airport Extreme network that i use for my G5/ OS 10.4.5... and she is using Windows XP Professional on her laptop..
The laptop connects fine to our home network... but will not connect to the internet via IE..
Do I need to download some kind of driver for the Airport to enable it to connect via windows ?
any other ideas ?
Thank you so much
IBM think pad Windows XP Pro
G5 Mac OS X (10.4.5)

After reading some of the similar topics on the
Board, I have taken the password off my system. still
no joy..the IBM thinkpad does not recognize the
wireless system.. and I have moved it next to the
airport to assure an adequate S/N ratio
You said before it was connecting to the wireless network, you are saying now it isn't?
Is the physical switch for the wireless in the on position?
next step is to try to get access by connecting a USB
cable to the rear of the Airport Extreme and then to
my wife’s computer..
do you think this may work better ?
Won't work, the USB port is for a printer.
You can use an ethernet cable from the LAN port and that should work.
Connecting a XP PC to a Airport Network via the LAN port of the AEBS
http://www.ifelix.co.uk/tech/1007.html
iFelix

Connected to network but not the internet

Hi all,
Earlier today when I tried to get onto the web Safari wouldn't let me. It says I am not connected to the internet, although my airport has full bars. I was using the web this morning without any problems, this just suddenly happened. I have decided it is something to do with the computers wireless settings because I have it sitting right next to a Macbook Pro which connects wirelessly, as do 3 iPhones without any trouble, and I can use the internet when I have my Macbook plugged in via an ethernet cable.
I have repaired disk permissions, restarted a few times and tried to create a new airport connection without any luck. Network Diagnostics just says i am 'unable to join airport network'.
Anyone have any suggestions?
Thanks in advance
Tom

Hi all,
Earlier today when I tried to get onto the web Safari wouldn't let me. It says I am not connected to the internet, although my airport has full bars. I was using the web this morning without any problems, this just suddenly happened. I have decided it is something to do with the computers wireless settings because I have it sitting right next to a Macbook Pro which connects wirelessly, as do 3 iPhones without any trouble, and I can use the internet when I have my Macbook plugged in via an ethernet cable.
I have repaired disk permissions, restarted a few times and tried to create a new airport connection without any luck. Network Diagnostics just says i am 'unable to join airport network'.
Anyone have any suggestions?
Thanks in advance
Tom

My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam

I can connect to my wireless network but not the internet

Hi. I've had my iBook G4 for just about a year and it's worked fantastically... until recently. My roommate has a PC and a linksys wireless router, and I've always been able to connect wirelessly to the internet until last week. I came home from work one day, and my iBook "saw" our wireless network and could "see" other computers on the network, but could not access the internet. My roommate had no problem accessing the internet through the wi-fi on his Dell laptop. So I zapped my p-ram and fiddled with some settings, but I still had the same problem.
Next I re-installed OS X, and tried again. Still the same issue. Of course, by this time I'm getting frustrated, but then about 12 hours later I decide to try it again and it just works! Like there was never any problem....
So anyway, it worked like a dream for about a week and now I have the same exact problem again! It connects to the network but not the internet. Is this a known problem? Any help would be GREATLY appreciated.
Thanks,
-joe.
iBook G4, 1.2 ghz Mac OS X (10.3.9) 256mb, combo drive

i was having the same issue with all my devices. everything would cut out and i would have to reboot my router...my internet service provider is ATT and i have a Uverse router. i went to their online support and i was able to chat with a tech support agent and they ended up changing the channel of my router and that has resolved my problem....i am currently steaming pics from my iphoto library to my apple tv and my wife is streaming music from her iphone at the same time...support tech stated that usually they have the router set to a generic channel that usually has a lot of traffic.

WRTG54S Connect to network but not internet

I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell running Vista) It sat in a box for about 6 months and now that I have a new one (Sony running 7) I can connect to my network but not the internet. I have upgraded the firmware from 7.6 to 7.8 with no change. I have tried no security, wep, and wap with no change. I also cloned the MAC, again no change. Windows cannot detect any problems and when I try to enable the router to connect to the internet it always says connection failed. I can connect when directly wired to the modem but not when wired to the router or wirelessly. Any ideas? Thanks
Solved!
Go to Solution.

Wire your computer directly to your modem, open a command prompt window and enter "ipconfig /all". Post the full output. That will show what kind of modem you have and what the best configuration for your WRT should be.

Can connect to network, but not to internet

Similar Messages

Maybe you are looking for