Can connect via SMB but not AFP....

Hi Guys,
Firstly, please let me apologise in case im being really stupid (highly likely! )
I have a mixed environment in which i have some iMacs (running Mavericks) and some Mac Pros (Running Mountain Lion 10.8.5). When connencting to the XServe using AFP, some get an error. I will go throught the steps i follow.
- From Finder, Go>Connect to Server..>afp://10.***.**.**>Connect
- I enter the login credentials and select Connect
- It gives me the option to select which volume to mount. I select Volume 1 and select OK
- Error - There was a problem connecting to the server "10.---.--.--". You do not have permission to access this server
When trying to access the server suing SMB instead of AFP (using the same credentials) it connects fine.
The issue with SMB is that for some reason, some of the folders wont show through SMB (no idea why)
The problem is affecting one imac on Mavericks and two Mac Pros on Mountain Lion. If i attempt to login using SMB on any machines which work fine with AFP, they will connect but after that, they wont revertback to AFP. They get the same error as above.
Any idea whats causing this?If any of the above causes confusion, feel free to shout at me and i will try to clear anything up.
Really appreciaste the help guys!
Pami

You'll need to connect your modem to your AEBS WAN port, configure your AEBS with the Airport Admin Utility, setting up the PPOE to properly log into your modem connection.
You should set up your mac to us DHCP (not PPOE).
THis should allow you to use either the ethernet port or wireless from your AEBS.
I hope this helps!

Similar Messages

VPN clients can connect via SSTP but not IKEv2 due to error 808

I have a Windows Server 2012 R2 with RRAS configured to allow SSTP / IKEv2 VPN connections. I'm using an external certificate for server authentication and the client authentication is done via domain username/password (Protected EAP). The clients can
connect successfully when using SSTP, but if IKEv2 is selected, then the following error is displayed:
Error 808:
The network connection between your computer and the VPN server could not be established because the remote server refused the connection. This is typically caused by a mismatch between the server's configuration and your connection settings. Please
contact the remote server's Administrator to verify the server configuration and your connection settings.
My external certificate has the Server Authentication EKU but not the IP security IKE intermediate, however it's the only
certificate installed, so I believe the certificate is OK.
Any ideas on what is causing the error?
Thank you.
Ricardo Costa

Hi,
What NAT device you are using? You must configure the IKEv2 related protocol on your NAT device too. For example if you are using the Cisco® NAT device you must
enable the IKEv2 support on the outside interface:
Enabling IKE on the Outside Interface
You must enable IKE on the interface that terminates the VPN tunnel. Typically this is the outside, or public interface. To enable IKEv1 or
IKEv2, use the crypto ikev1 | ikev2 enable command from global configuration mode:
=================================================
crypto ikev1 | ikev2 enable interface-name
For example:
hostname(config)# crypto ikev1 enable outside
=================================================
The related third party information:
Configuring IPSec and ISAKMP
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/vpn_ike.html#wp1042302
You can refer the following KB to enable the RRAS logging.
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does
not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers
in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can connect via ODBC but not via SQL Developer?

Hi, all.
My setup:
Windows XP Pro
JDK 1.6
SQL Developer 2.1.1.64.45
I'm attempting to connect to an Oracle DB using OS authentication and trying hand-entry of the host and SID; and also trying my TNS file. When I attempt to connect via SQL Developer, I get the following error:
"Status : Failure -Test failed: ORA-01017: invalid username/password; logon denied."
When I attempt this same connection, however, using ODBC and Access, I can get right in and see the tables.
What can I try in order to get SQL Developer working correctly?
Thanks,
IVR Avenger

I'm not really familiar with connections Using OS authentication, but if OCI+TNS based connections work you could try to activate OCI connections by selecting
Preferences -> Database -> Advanced -> Use OCI/Thick Driverand then use the TNS connection type when creating your connection.
It should work well even with the thin driver but i cannot help you in this case because i've never had to use this kind of authentication.

Can connect via Ethernet but not via AirPort

I'm having some problems using my AirPort in Germany. I can connect just fine using an Ethernet cable direct from the modem (NETGEAR DG632B) but when I have plug the Ethernet cable into the AirPort I can't connect. I beleive it has to do with PPoE settings, which I am not really familiar with.
There are three spots I can enter my account info. 1, on the modem itself via Safari; 2, on the AirPort via AirPort Admin Utility; 3, on the Mac via Network Preferences. I have input my PPoE username/password into the modem while directly connected. I would tend to think that this shoudl be it and that everywhere on the LAN side of the modem would be able to utilize that account. The NETGEAR settings page shows the ADSL port Network Type as PPPOE and the LAN port as DHCP, so I have attempted to set up my AirPort and Network prefs using DHCP. That leads to "You are not connected to the Internet. Safari can’t open the page “http://www.google.com/” because your computer isn’t connected to the Internet." Network Diagnostics shows green at AirPort, AirPort Settings, Network Settings and ISP. It initially shows yellow at Internet and Server which lead to "Failed" on both. Network Diagnostics then asks me to choose my network port configuration (Built-in Ethernet, Internal Modem, Airport,Other). I select AirPort and select my AirPort network. Then all the Status lights except for AirPort turn red and asks if I use a DSL or cable model. I select yes, it asks me to restart the device, I do, it asks if I can restart any other devices, I select no. At that point Network Diagnostics says it is unable to connect to the Internet.
I have down-graded to Airport Firmware v5.5.1 as some have advised. No change. I'm running MacOS 10.4.6
My AirPort is just fine as I can use it to set up a LAN with no problem. I even pulled out my old Graphite base station and tried it. Same thing.
I have tried putting my PPPoE account info into my AirPort, my Network prefs both individually and both at the same time. Nothing. Is there something that I'm missing?

You'll need to connect your modem to your AEBS WAN port, configure your AEBS with the Airport Admin Utility, setting up the PPOE to properly log into your modem connection.
You should set up your mac to us DHCP (not PPOE).
THis should allow you to use either the ethernet port or wireless from your AEBS.
I hope this helps!

MacBook Pro can connect via Airport but not iPhone or iBook G4.

Anyone have any ideas? My Macbook Pro can connect to my Airport (v.7.3.1, 802.11n) but not my iPhone or iBook or a Windows Computer or WiFi Blackberry.
The connection is strong and detectable by the ibook but "unable to connect".
Somethings up with the settings but not sure what.
Any ideas?
HELP!
thanks
--K

I've tried Channel 1,2,3,4,5 (still need to try the others)
Secured or unsecured the only wireless connection that works is my MacBookPro.
I get the message "unable to join network..." The connection is very strong.

Can connect via wifi but not by ethernet cable?

Hi,
I'm a bit confused here.
I have an airport express which works fine and I just bought an airport extreme.
The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
Both airport express and extreme are lit up green and they both appear on the Airport Utility.
The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
Any help is much appreciated!

The airport extreme is connected to the modem by an ethernet cable
On the WAN plug, right?
and the airport express is connected by ethernet cable to the airport extreme.
Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
http://support.apple.com/kb/HT1515?viewlocale=en_US

Can connect via Ethernet but not on Airport

I am able to connect fine with Ethernet. Initially when I brought up Safari it launched the modem and I had to enter my ISP username and password. Then I was able to connect fine with Ethernet. My problem is that I cannot connect with Airport. I disconnect the Ethernet from my MacBook, then I turn on Airport. It detects the wireless modem. I select it. It connects fine, but no internet. I go to the System Preferences, Network. But find nothing wrong. Am I missing something ??? Please advise.

Hi,
You also might want to check that the AirPort doesnt have it selected to have the IP set manually. Always have this detected by DHCP. There should'nt be any problems there, if you are using the Ethernet cable.
Regards
Marc

I'm able to connect via wifi but not via ethernet

I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS.

Can connect to appstore but not can't download songs or music albums

can connect to appstore but not can't download songs or music albums in mp3.

Sorry, but music tracks and other media contact are not available in Israel via an iTunes Store at this time. None of us here can say when Apple will be able to obtain the necessary licenses and feel it worthwhile to set up an iTunes Store for your country.
Regards.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Can connect via VPN, but can't access AFP server on same Xserve

Hi:
I've set up our XServe with MacOS X Server 10.5.2 to do AFP and VPN (L2TP only; PPTP is disabled). The XServe is a standalone server, not connected to any other direstory server.
I can connect to the XServe's AFP server from my Mac over our wired and wireless network. The AFP server shows up in the sidebar of Finder windows. So far, so good.
I am able to successfully connect to our network via the VPN with Mac OS X 10.5.2 client (on two different machines) using L2TP through our network's firewall (on a Netopia T1 router; UDF ports 500 and 4500 and IP Protocol 50 and 51 are open) using a shared secret.
But I cannot connect to the XServe itself to use Server Admin or AFP (using afp://server.company.com or afp://xxx.xxx.xxx.xxx via the Go > Connect to Server command).
The error I get while connecting to the 10.5.2 AFP server is Some data in apf://server.mycompany.com could not be read or written (Error Code -36 ). I saw this error associated with a SMB problem in 10.4.x, but SMB is not running.
Other iChat users in my office also do not automatically show up in the Bonjour list when I connect to the network. Other computers on our network do not appear in the sidebar of a Finder window. (I'm told these are to be expected, as Bonjour isn't supported (in the "local area Bonjour" over a WAN link - it's purely a multicast feature on the network in the office, and won't be routed across the VPN link. True?)
Now, here's the odd part. There is a second server (v10.4.11) on our network running AFP. I can connect to it (using afp://server.company.com via the Go > Connect to Server command) and mount its various sharepoints via the VPN.
The only thing I see in the VPN log that seems amiss is this (but I have no idea what it means):
Tue Mar 11 23:09:27 2008 : Unsupported protocol 0x8057 received
--Both the 10.5.2 and the 10.4.11 servers have DNS properly configured (though our ISP; we're not running our own DNS).
--Both servers and the client have public IP addresses and have the same subnet mask. Network Utility confirms this while connected to the VPN.
--NAT is not running. The ISP is responding with public IPs for the servers.
--The firewall for the 10.5.2 server is not running (but will be once I get this all working).
--The IP address range for the VPN server doesn't overlap our DHCP pool (which also currently uses public IP addresses).
--Any user can access any service.
--No network routing definitions have been set up.
--In essence, I've followed the steps on Pages 141-142 of the Network Services Admin Guide.
One other note: After I connect, the Network Preferences > VPN > Advanced > TCP/IP window shows the IP address for the client just fine (assigned from the VPN pool), but lists the router as having the IP address of the XServe (rather than the router on the network). Is that normal?
I'm hoping I don't need to have the XServe run DNS as an internal LAN DNS server.... And I'm not sure why I would have to if I can already successfully connect to the 10.4.11 AFP server .
What simple step am I missing?
TIA,
mm

"I am able to successfully connect to our network via the VPN with Mac OS X 10.5.2 client (on two different machines) using L2TP through our network's firewall (on a Netopia T1 router; UDF ports 500 and 4500 and IP Protocol 50 and 51 are open) using a shared secret."
I suspect you mean UDP ports and you might need UDP port 1701 open too.
You only need IP protocol 50 (ESP), protocol 51 (AH) isn't used. And ESP is only used when client and server isn't behind NAT (when NAT is used only the UDP ports are used).
"Unsupported protocol 0x8057 received"
This is usually seen when you can't get GRE through but since you don't use PPTP I can't be sure why this is registered in the logs. Sometimes when connecting using PPTP you have to disconnect and then reconnect for everything to work - you might try this for L2TP too.
But if you already can reach services on any LAN nodes through the VPN I wouldn't bother with it.
As you have a firewall in front of the server you need a second alias IP on the server that you can use to get at the services running on the server through the VPN. The firewall blocks all ports protocols not opened - that's why you can't use the server main IP even if the VPN is up.
The netmask is used by all nodes to determine how big your subnet is: what part of the IP number is the network number and what range the node number is in => really: should traffic be directed to a node on the same LAN or sent directly to the gw/router for forwarding.
What you can't do is connect from a NATed network to another NATed network that both are using the same network number. (That's why people should stay away from using the "default" 192.168.0.0/24 and 192.168.1.0/24 networks for VPN server LANs).
Try your settings at http://www.jodies.de/ipcalc to see what I mean.
"...lists the router as having the IP address of the XServe (rather than the router on the network). Is that normal?"
Yes. The VPN server is the VPN gw/router.
"The firewall for the 10.5.2 server is not running (but will be once I get this all working)."
If you already have a firewall in front of your servers that is a bit redundant.
"--No network routing definitions have been set up."
"I'm hoping I don't need to have the XServe run DNS as an internal LAN DNS server"
You need routing definitions if you want to setup a split tunnel VPN or all traffic is routed through the VPN when connected. The VPN becomes the default gw.
Without ipforwarding ON in the server you can only reach nodes on the server LAN - not Internet.
DNS is needed for your servers forward and reverse names/IPs for advanced services but doesn't need to run in any of your own servers.
If you decide to do a split tunnel VPN config (adding public and private routing definitions) a reachable DNS IP for VPN clients (in VPN config on server) is needed for VPN clients or they can't use names to find anything. To reach this DNS IP if public/not on your server LAN, you need your server to forward IP DNS lookups and have a routing definition for it.
A split tunnel VPN only send traffic for your server LAN through the VPN and all other traffic directly to the local gw/router (Internet).

Can connect to skype but not internet, running snow leopard

Moved to new house; was able to connect to internet with firefox first day; after that can get on Skype but not internet. Is it my computer or the wireless router in the house? what should I do?

This is all I could find on the topic, but it doesn't resolve my issue:
http://docs.info.apple.com/article.html?artnum=106798
http://docs.info.apple.com/article.html?artnum=106797

I can connect to WiFi but not the internet

I am trying to connect a new IPad 2. I have a Belkin router that is B+G+N. I use WPA2 encryption and MAC filtering. The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email. When I type any URL in Safari it takes me to my router's management page. In fact I can log into my router and manage it from my IPad but I can't connect to anything else. I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's. This has me baffled.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I can connect to MAC but not my PC

I have a new Nano, that connects to Mac but not my PC. When I try to connect to PC it says "iTunes as detected a Macintosh formatted iPod. You must restore this iPod before you can use it on Windows."
How can I get my Nano to work on both?
Thanks!

Windows cannot read a Mac formatted disk.
You need to Restore on iTunes for Windows and it will then work on Mac & Windows.

Airdisk works over SMB but not AFP

Just connected an external drive to a gigabit Airport Extreme (had the Extreme over a year, btw). Finder sees the Extreme in the Shared section, but cannot connect to it. I receive the error "Connection Failed" and that the server is not available.
However, using Windows XP in Fusion, I can see the Extreme and connect to it just fine using SMB.
I can also connect to a ReadyNAS Duo on the same network via AFP with no problems.
I have turned off the Mac's firewall and turned on all the available connection options on the Extreme. I've tried all the different access options as well (passwords, accounts, etc.). I've even repaired permissions on the Mac to no avail. My wife's Mac also cannot connect to the Extreme using AFP (haven't tried SMB yet, though). She also has Fusion/XP installed.
Any ideas?

Just to add to the oddness: Installed a demo of Path Finder 5. It shows the Airport Extreme available under the Share section as AFP and SMB capable. AFP connection works perfectly.
Something amiss in the Finder?

Can connect via SMB but not AFP....

Similar Messages

Maybe you are looking for