Can CR 2008 with XML ODBC driver using SQL CASE statement?
Hi:
when i use SQL Command to provide data to the report from XML file connection. I can not use CASE statement , CR always has error message about "CASE" word.
I test the same Statement in SQL client connected to Oracle, it runs fine.
So.. Is it driver's limitation that XML datasource can not use CASE statement inside SQL command window?
Thanks anyone's reply in advance.
Johnnychi
Hi Johnny,
CR supports what every the ODBC driver supports. The error you are getting is from the XML driver, CR is just passing it through.
Try using an ODBC to XML driver and then a stand-alone ODBC test tool to see if your SQL works.
If not you'll have to find another way to use the CASE statement.
Thank you
Don
Similar Messages
-
I have 6 radio buttons.i want to use a case statement to read them.
i have 6 radio buttons.i grouped them.i want to read them in a subroutine using a case statement.how can i read them
Hi Leela,
You cannot use the Case statement to read the radio buttons.
nstead you will have to use Loop at Screen under At Selection Screen Output.
Please refer to the below code or the reference:
*& Report ZHYPERION *
*& Project : SubSea7
Created on : 07/02/2007
Created by : Puneet Jhari.
*& Purpose : For SAP Interface download Hyperion.
REPORT zhyperion NO STANDARD PAGE HEADING MESSAGE-ID zhyper.
Start of Data Declaration
TYPE-POOLS : truxs,vrm.
TABLES : glpct,cepc.
DATA : var TYPE i,
total TYPE f.
DATA : BEGIN OF wa2,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa2.
DATA : BEGIN OF wa3,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa3.
DATA : BEGIN OF wa4,
racct LIKE glpct-racct,
END OF wa4.
DATA : BEGIN OF wa5,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa5.
DATA : BEGIN OF wa9,
khinr LIKE cepc-khinr,
racct LIKE glpct-racct,
total1(8) TYPE p DECIMALS 2,
END OF wa9.
DATA : BEGIN OF wa6,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa6.
DATA : BEGIN OF wa7,
khinr LIKE cepc-khinr,
prctr LIKE cepc-prctr,
rprctr LIKE glpct-rprctr,
ryear LIKE glpct-ryear,
rbukrs LIKE glpct-rbukrs,
racct LIKE glpct-racct,
ksl01 LIKE glpct-ksl01,
END OF wa7.
DATA : itab3 LIKE TABLE OF wa2,
itab4 LIKE TABLE OF wa3,
itab5 LIKE TABLE OF wa4 WITH HEADER LINE,
itab6 LIKE TABLE OF wa5 WITH HEADER LINE,
itab7 LIKE TABLE OF wa6,
itab8 LIKE TABLE OF wa7,
itab10 LIKE TABLE OF wa9.
DATA : flag(1) TYPE c,
temp(6) TYPE c.
DATA : itab2 TYPE truxs_t_text_data,
itab9 TYPE truxs_t_text_data WITH HEADER LINE.
DATA : name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list,
FILNAM11 TYPE STRING,
FILNAM21 TYPE STRING.
End of Data Declaration
Begin of Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: r1 DEFAULT 'X' RADIOBUTTON GROUP g1 USER-COMMAND rad1,
r2 RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS: rbukrs1 TYPE glpct-rbukrs MODIF ID ful,
khinr1 TYPE cepc-khinr AS LISTBOX VISIBLE LENGTH 20
MODIF ID sam ,
ryear1 TYPE glpct-ryear MODIF ID ful,
ryear2 TYPE glpct-ryear MODIF ID sam,
rpmax1 TYPE i MODIF ID ful,
rpmax2 TYPE i MODIF ID sam,
filnam1 TYPE rlgrap-filename MODIF ID ful,
filnam2 TYPE RLGRAP-FILENAME MODIF ID sam.
SELECTION-SCREEN END OF BLOCK b3.
End of Selection Screen
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
PERFORM populate. "For populating the drop-down list.
CLEAR VALUE.
REFRESH LIST.
NAME = 'KHINR1'.
VALUE-KEY = '1S7_NOCASV'.
VALUE-TEXT = '1S7_NOCASV'.
APPEND VALUE TO LIST.
VALUE-KEY = '1S7_NOCJOT'.
VALUE-TEXT = '1S7_NOCJOT'.
APPEND VALUE TO LIST.
LOOP AT SCREEN. "For toggling between the selection screens.
IF r1 EQ 'X'.
IF screen-group1 = 'SAM'.
screen-active = 0.
ENDIF.
ELSEIF r2 EQ 'X'.
IF screen-group1 = 'FUL'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
For the Drop-Down Listbox
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Begin of Data Selection
START-OF-SELECTION.
When Company Code radio button is selected.
IF r1 EQ 'X'. "If Company Code radio button is selected.
IF rbukrs1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM1 TO FILNAM11.
CASE rpmax1.
WHEN '01'.
SELECT ryear rbukrs racct ksl01
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '02'.
SELECT ryear rbukrs racct ksl02
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '03'.
SELECT ryear rbukrs racct ksl03
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '04'.
SELECT ryear rbukrs racct ksl04
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '05'.
SELECT ryear rbukrs racct ksl05
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '06'.
SELECT ryear rbukrs racct ksl06
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '07'.
SELECT ryear rbukrs racct ksl07
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '08'.
SELECT ryear rbukrs racct ksl08
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '09'.
SELECT ryear rbukrs racct ksl09
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '10'.
SELECT ryear rbukrs racct ksl10
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '11'.
SELECT ryear rbukrs racct ksl11
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '12'.
SELECT ryear rbukrs racct ksl12
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '13'.
SELECT ryear rbukrs racct ksl13
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '14'.
SELECT ryear rbukrs racct ksl14
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '15'.
SELECT ryear rbukrs racct ksl15
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
WHEN '16'.
SELECT ryear rbukrs racct ksl16
FROM glpct INTO TABLE itab3 WHERE rbukrs EQ rbukrs1 AND ryear EQ ryear1.
ENDCASE.
MOVE itab3 TO itab4.
LOOP AT itab3 INTO wa2.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa2-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab4 INTO wa3.
IF wa2-rbukrs EQ wa3-rbukrs AND wa2-racct EQ wa3-racct AND
wa2-ryear EQ wa3-ryear.
total = total + wa3-ksl01.
ENDIF.
ENDLOOP.
wa5-rbukrs = wa2-rbukrs.
wa5-racct = wa2-racct+4(6).
wa5-total1 = total.
APPEND wa5 TO itab6.
CLEAR total.
APPEND wa2-racct TO itab5.
ENDLOOP.
If no data is available corresponding to the values entered.
IF itab6[] IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab6
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam1 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam1.
ENDLOOP.
CLOSE DATASET filnam1.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM11
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
When Region radio button is selected.
ELSEIF r2 EQ 'X'.
IF khinr1 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF rpmax2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF ryear2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
IF filnam2 IS INITIAL.
MESSAGE i002.
LEAVE TO SCREEN 1000.
ENDIF.
MOVE FILNAM2 TO FILNAM21.
CASE rpmax2.
WHEN '01'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl01
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '02'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl02
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '03'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl03
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '04'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl04
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '05'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl05
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '06'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl06
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '07'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl07
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '08'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl08
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '09'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl09
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '10'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl10
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '11'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl11
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '12'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl12
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '13'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl13
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '14'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl14
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '15'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl15
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
WHEN '16'.
SELECT ckhinr cprctr grprctr gryear grbukrs gracct g~ksl16
INTO CORRESPONDING FIELDS OF TABLE itab7
FROM ( glpct AS g
INNER JOIN cepc AS c ON grprctr = cprctr )
WHERE c~khinr = khinr1 AND
g~ryear = ryear2.
ENDCASE.
MOVE itab7 TO itab8.
LOOP AT itab7 INTO wa6.
flag = 0.
LOOP AT itab5 INTO wa4.
IF wa6-racct EQ wa4-racct.
flag = 1.
EXIT.
ENDIF.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM itab5.
IF flag = 1.
CONTINUE.
ENDIF.
LOOP AT itab8 INTO wa7.
IF wa6-rbukrs EQ wa7-rbukrs AND wa6-racct EQ wa7-racct AND
wa6-ryear EQ wa7-ryear.
total = total + wa7-ksl01.
ENDIF.
ENDLOOP.
wa9-khinr = khinr1.
wa9-racct = wa6-racct+4(6).
wa9-total1 = total.
APPEND wa9 TO itab10.
CLEAR total.
APPEND wa6-racct TO itab5.
ENDLOOP.
*If no data is available corresponding to the values entered.
IF itab10 IS INITIAL.
MESSAGE i003.
ENDIF.
For making the file Comma separated
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
i_field_seperator = ','
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
i_tab_sap_data = itab10
CHANGING
i_tab_converted_data = itab2
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
For downloading it to the Presentation Server
MOVE itab2[] TO itab9[].
OPEN DATASET filnam2 FOR OUTPUT IN LEGACY TEXT MODE.
LOOP AT itab9.
TRANSFER itab9 TO filnam2.
ENDLOOP.
CLOSE DATASET filnam2.
IF sy-subrc EQ 0.
MESSAGE s004.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = FILNAM21
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
WRITE_LF_AFTER_LAST_LINE = ABAP_TRUE
IMPORTING
FILELENGTH =
tables
data_tab = itab2
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc eq 0.
message s004.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form POPULATE
text
FORM populate.
CLEAR value.
REFRESH list.
name = 'KHINR1'.
value-key = '1S7_SUBSEA'.
value-text = '1S7_SUBSEA'.
APPEND value TO list.
value-key = '1S7_GEN'.
value-text = '1S7_GEN'.
APPEND value TO list.
value-key = '1S7'.
value-text = '1S7'.
APPEND value TO list.
value-key = '1S7_CORPTP'.
value-text = '1S7_CORPTP'.
APPEND value TO list.
value-key = '1S7_BRRE'.
value-text = '1S7_BRRE'.
APPEND value TO list.
value-key = '1S7_BRCON'.
value-text = '1S7_BRCON'.
APPEND value TO list.
value-key = '1S7_BRCJOB'.
value-text = '1S7_BRCJOB'.
APPEND value TO list.
value-key = '1S7_BRCJBU'.
value-text = '1S7_BRCJBU'.
APPEND value TO list.
value-key = '1S7_BRCJCO'.
value-text = '1S7_BRCJCO'.
APPEND value TO list.
value-key = '1S7_BRCJIR'.
value-text = '1S7_BRCJIR'.
APPEND value TO list.
value-key = '1S7_BRCJEN'.
value-text = '1S7_BRCJEN'.
APPEND value TO list.
value-key = '1S7_BRCJPI'.
value-text = '1S7_BRCJPI'.
APPEND value TO list.
value-key = '1S7_BRCJSU'.
value-text = '1S7_BRCJSU'.
APPEND value TO list.
value-key = '1S7_BRCJFL'.
value-text = '1S7_BRCJFL'.
APPEND value TO list.
value-key = '1S7_BRCJOT'.
value-text = '1S7_BRCJOT'.
APPEND value TO list.
value-key = '1S7_BRCASV'.
value-text = '1S7_BRCASV'.
APPEND value TO list.
value-key = '1S7_BRCASE'.
value-text = '1S7_BRCASE'.
APPEND value TO list.
value-key = '1S7_BRCOOC'.
value-text = '1S7_BRCOOC'.
APPEND value TO list.
value-key = '1S7_BRCOHD'.
value-text = '1S7_BRCOHD'.
APPEND value TO list.
value-key = '1S7_BRCGEN'.
value-text = '1S7_BRCGEN'.
APPEND value TO list.
value-key = '1S7_BRDRI'.
value-text = '1S7_BRDRI'.
APPEND value TO list.
value-key = '1S7_BRDJOB'.
value-text = '1S7_BRDJOB'.
APPEND value TO list.
value-key = '1S7_BRDASV'.
value-text = '1S7_BRDASV'.
APPEND value TO list.
value-key = '1S7_BRDASE'.
value-text = '1S7_BRDASE'.
APPEND value TO list.
value-key = '1S7_BRDAEW'.
value-text = '1S7_BRDAEW'.
APPEND value TO list.
value-key = '1S7_BRDAEO'.
value-text = '1S7_BRDAEO'.
APPEND value TO list.
value-key = '1S7_BRDAET'.
value-text = '1S7_BRDAET'.
APPEND value TO list.
value-key = '1S7_BRDOOC'.
value-text = '1S7_BRDOOC'.
APPEND value TO list.
value-key = '1S7_BRDOHD'.
value-text = '1S7_BRDOHD'.
APPEND value TO list.
value-key = '1S7_BRVER'.
value-text = '1S7_BRVER'.
APPEND value TO list.
value-key = '1S7_BRVJOB'.
value-text = '1S7_BRVJOB'.
APPEND value TO list.
value-key = '1S7_BRVASV'.
value-text = '1S7_BRVASV'.
APPEND value TO list.
value-key = '1S7_BRVASE'.
value-text = '1S7_BRVASE'.
APPEND value TO list.
value-key = '1S7_BRVOOC'.
value-text = '1S7_BRVOOC'.
APPEND value TO list.
value-key = '1S7_BRVOHD'.
value-text = '1S7_BRVOHD'.
APPEND value TO list.
value-key = '1S7_UKRE'.
value-text = '1S7_UKRE'.
APPEND value TO list.
value-key = '1S7_UKCON'.
value-text = '1S7_UKCON'.
APPEND value TO list.
value-key = '1S7_UKCJOB'.
value-text = '1S7_UKCJOB'.
APPEND value TO list.
value-key = '1S7_UKCJBU'.
value-text = '1S7_UKCJBU'.
APPEND value TO list.
value-key = '1S7_UKCJCO'.
value-text = '1S7_UKCJCO'.
APPEND value TO list.
value-key = '1S7_UKCJIR'.
value-text = '1S7_UKCJIR'.
APPEND value TO list.
value-key = '1S7_UKCJEN'.
value-text = '1S7_UKCJEN'.
APPEND value TO list.
value-key = '1S7_UKCJPI'.
value-text = '1S7_UKCJPI'.
APPEND value TO list.
value-key = '1S7_UKCJSU'.
value-text = '1S7_UKCJSU'.
APPEND value TO list.
value-key = '1S7_UKCJFL'.
value-text = '1S7_UKCJFL'.
APPEND value TO list.
value-key = '1S7_UKCJOT'.
value-text = '1S7_UKCJOT'.
APPEND value TO list.
value-key = '1S7_UKCASV'.
value-text = '1S7_UKCASV'.
APPEND value TO list.
value-key = '1S7_UKCASE'.
value-text = '1S7_UKCASE'.
APPEND value TO list.
value-key = '1S7_UKCOOC'.
value-text = '1S7_UKCOOC'.
APPEND value TO list.
value-key = '1S7_UKBA'.
value-text = '1S7_UKBA'.
APPEND value TO list.
value-key = '1S7_UKBATE'.
value-text = '1S7_UKBATE'.
APPEND value TO list.
value-key = '1S7_UKCOHD'.
value-text = '1S7_UKCOHD'.
APPEND value TO list.
value-key = '1S7_UKCGEN'.
value-text = '1S7_UKCGEN'.
APPEND value TO list.
value-key = '1S7_UKDRI'.
value-text = '1S7_UKDRI'.
APPEND value TO list.
value-key = '1S7_UKDJOB'.
value-text = '1S7_UKDJOB'.
APPEND value TO list.
value-key = '1S7_UKDASV'.
value-text = '1S7_UKDASV'.
APPEND value TO list.
value-key = '1S7_UKDASE'.
value-text = '1S7_UKDASE'.
APPEND value TO list.
value-key = '1S7_UKDAEW'.
value-text = '1S7_UKDAEW'.
APPEND value TO list.
value-key = '1S7_UKDAEO'.
value-text = '1S7_UKDAEO'.
APPEND value TO list.
value-key = '1S7_UKDAET'.
value-text = '1S7_UKDAET'.
APPEND value TO list.
value-key = '1S7_UKDOOC'.
value-text = '1S7_UKDOOC'.
APPEND value TO list.
value-key = '1S7_UKDOHD'.
value-text = '1S7_UKDOHD'.
APPEND value TO list.
value-key = '1S7_UKVER'.
value-text = '1S7_UKVER'.
APPEND value TO list.
value-key = '1S7_UKVJOB'.
value-text = '1S7_UKVJOB'.
APPEND value TO list.
value-key = '1S7_UKVASV'.
value-text = '1S7_UKVASV'.
APPEND value TO list.
value-key = '1S7_UKVASE'.
value-text = '1S7_UKVASE'.
APPEND value TO list.
value-key = '1S7_UKVOOC'.
value-text = '1S7_UKVOOC'.
APPEND value TO list.
value-key = '1S7_UKVOHD'.
value-text = '1S7_UKVOHD'.
APPEND value TO list.
value-key = '1S7_NORE'.
value-text = '1S7_NORE'.
APPEND value TO list.
value-key = '1S7_NOCON'.
value-text = '1S7_NOCON'.
APPEND value TO list.
value-key = '1S7_NOCJOB'.
value-text = '1S7_NOCJOB'.
APPEND value TO list.
value-key = '1S7_NOCJBU'.
value-text = '1S7_NOCJBU'.
APPEND value TO list.
value-key = '1S7_NOCJCO'.
value-text = '1S7_NOCJCO'.
APPEND value TO list.
value-key = '1S7_NOCJIR'.
value-text = '1S7_NOCJIR'.
APPEND value TO list.
value-key = '1S7_NOCJEN'.
value-text = '1S7_NOCJEN'.
APPEND value TO list.
value-key = '1S7_NOCJPI'.
value-text = '1S7_NOCJPI'.
APPEND value TO list.
value-key = '1S7_NOCJSU'.
value-text = '1S7_NOCJSU'.
APPEND value TO list.
value-key = '1S7_NOCJFL'.
value-text = '1S7_NOCJFL'.
APPEND value TO list.
value-key = '1S7_NOCJOT'.
value-text = '1S7_NOCJOT'.
APPEND value TO list.
value-key = '1S7_NOCASV'.
value-text = '1S7_NOCASV'.
APPEND value TO list.
value-key = '1S7_NOCASE'.
value-text = '1S7_NOCASE'.
APPEND value TO list.
value-key = '1S7_NOCOOC'.
value-text = '1S7_NOCOOC'.
APPEND value TO list.
value-key = '1S7_NOCOHD'.
value-text = '1S7_NOCOHD'.
APPEND value TO list.
value-key = '1S7_NOCGEN'.
value-text = '1S7_NOCGEN'.
APPEND value TO list.
value-key = '1S7_NODRI'.
value-text = '1S7_NODRI'.
APPEND value TO list.
value-key = '1S7_NODJOB'.
value-text = '1S7_NODJOB'.
APPEND value TO list.
value-key = '1S7_NODASV'.
value-text = '1S7_NODASV'.
APPEND value TO list.
value-key = '1S7_NODASE'.
value-text = '1S7_NODASE'.
APPEND value TO list.
value-key = '1S7_NODAEW'.
value-text = '1S7_NODAEW'.
APPEND value TO list.
value-key = '1S7_NODAEO'.
value-text = '1S7_NODAEO'.
APPEND value TO list.
value-key = '1S7_NODAET'.
value-text = '1S7_NODAET'.
APPEND value TO list.
value-key = '1S7_NODOOC'.
value-text = '1S7_NODOOC'.
APPEND value TO list.
value-key = '1S7_NODOHD'.
value-text = '1S7_NODOHD'.
APPEND value TO list.
value-key = '1S7_NOVER'.
value-text = '1S7_NOVER'.
APPEND value TO list.
value-key = '1S7_NOVJOB'.
value-text = '1S7_NOVJOB'.
APPEND value TO list.
value-key = '1S7_NOVASV'.
value-text = '1S7_NOVASV'.
APPEND value TO list.
value-key = '1S7_NOVASE'.
value-text = '1S7_NOVASE'.
APPEND value TO list.
value-key = '1S7_NOVOOC'.
value-text = '1S7_NOVOOC'.
APPEND value TO list.
value-key = '1S7_NOVOHD'.
value-text = '1S7_NOVOHD'.
APPEND value TO list.
value-key = '1S7_GORE'.
value-text = '1S7_GORE'.
APPEND value TO list.
value-key = '1S7_GOCON'.
value-text = '1S7_GOCON'.
APPEND value TO list.
value-key = '1S7_GOCJOB'.
value-text = '1S7_GOCJOB'.
APPEND value TO list.
value-key = '1S7_GOCJBU'.
value-text = '1S7_GOCJBU'.
APPEND value TO list.
value-key = '1S7_GOCJCO'.
value-text = '1S7_GOCJCO'.
APPEND value TO list.
value-key = '1S7_GOCJIR'.
value-text = '1S7_GOCJIR'.
APPEND value TO list.
value-key = '1S7_GOCJEN'.
value-text = '1S7_GOCJEN'.
APPEND value TO list.
value-key = '1S7_GOCJPI'.
value-text = '1S7_GOCJPI'.
APPEND value TO list.
value-key = '1S7_GOCJSU'.
value-text = '1S7_GOCJSU'.
APPEND value TO list.
value-key = '1S7_GOCJFL'.
value-text = '1S7_GOCJFL'.
APPEND value TO list.
value-key = '1S7_GOCJOT'.
value-text = '1S7_GOCJOT'.
APPEND value TO list.
value-key = '1S7_GOCASV'.
value-text = '1S7_GOCASV'.
APPEND value TO list.
value-key = '1S7_GOCASE'.
value-text = '1S7_GOCASE'.
APPEND value TO list.
value-key = '1S7_GOCOOC'.
value-text = '1S7_GOCOOC'.
APPEND value TO list.
value-key = '1S7_GOCOHD'.
value-text = '1S7_GOCOHD'.
APPEND value TO list.
value-key = '1S7_GOCGEN'.
value-text = '1S7_GOCGEN'.
APPEND value TO list.
value-key = '1S7_GODRI'.
value-text = '1S7_GODRI'.
APPEND value TO list.
value-key = '1S7_GODJOB'.
value-text = '1S7_GODJOB'.
APPEND value TO list.
value-key = '1S7_GODASV'.
value-text = '1S7_GODASV'.
APPEND value TO list.
value-key = '1S7_GODASE'.
value-text = '1S7_GODASE'.
APPEND value TO list.
value-key = '1S7_GODAEW'.
value-text = '1S7_GODAEW'.
APPEND value TO list.
value-key = '1S7_GODAEO'.
value-text = '1S7_GODAEO'.
APPEND value TO list.
value-key = '1S7_GODAET'.
value-text = '1S7_GODAET'.
APPEND value TO list.
value-key = '1S7_GODOOC'.
value-text = '1S7_GODOOC'.
APPEND value TO list.
value-key = '1S7_GODOHD'.
value-text = '1S7_GODOHD'.
APPEND value TO list.
value-key = '1S7_GOVER'.
value-text = '1S7_GOVER'.
APPEND value TO list.
value-key = '1S7_GOVJOB'.
value-text = '1S7_GOVJOB'.
APPEND value TO list.
value-key = '1S7_GOVASV'.
value-text = '1S7_GOVASV'.
APPEND value TO list.
value-key = '1S7_GOVASE'.
value-text = '1S7_GOVASE'.
APPEND value TO list.
value-key = '1S7_GOVOOC'.
value-text = '1S7_GOVOOC'.
APPEND value TO list.
value-key = '1S7_GOVOHD'.
value-text = '1S7_GOVOHD'.
APPEND value TO list.
value-key = '1S7_GVRE'.
value-text = '1S7_GVRE'.
APPEND value TO list.
value-key = '1S7_GVCON'.
value-text = '1S7_GVCON'.
APPEND value TO list.
value-key = '1S7_GVCJOB'.
value-text = '1S7_GVCJOB'.
APPEND value TO list.
value-key = '1S7_GVCJBU'.
value-text = '1S7_GVCJBU'.
APPEND value TO list.
value-key = '1S7_GVCJCO'.
value-text = '1S7_GVCJCO'.
APPEND value TO list.
value-key = '1S7_GVCJIR'.
value-text = '1S7_GVCJIR'.
APPEND value TO list.
value-key = '1S7_GVCJEN'.
value-text = '1S7_GVCJEN'.
APPEND value TO list.
value-key = '1S7_GVCJPI'.
value-text = '1S7_GVCJPI'.
APPEND value TO list.
value-key = '1S7_GVCJSU'.
value-text = '1S7_GVCJSU'.
APPEND value TO list.
value-key = '1S7_GVCJFL'.
value-text = '1S7_GVCJFL'.
APPEND value TO list.
value-key = '1S7_GVCJOT'.
value-text = '1S7_GVCJOT'.
APPEND value TO list.
value-key = '1S7_GVCASV'.
value-text = '1S7_GVCASV'.
APPEND value TO list.
value-key = '1S7_GVCASE'.
value-text = '1S7_GVCASE'.
APPEND value TO list.
value-key = '1S7_GVCOOC'.
value-text = '1S7_GVCOOC'.
APPEND value TO list.
value-key = '1S7_GVCOHD'.
value-text = '1S7_GVCOHD'.
APPEND value TO list.
value-key = '1S7_GVCGEN'.
value-text = '1S7_GVCGEN'.
APPEND value TO list.
value-key = '1S7_GVDRI'.
value-text = '1S7_GVDRI'.
APPEND value TO list.
value-key = '1S7_GVDJOB'.
value-text = '1S7_GVDJOB'.
APPEND value TO list.
value-key = '1S7_GVDASV'.
value-text = '1S7_GVDASV'.
APPEND value TO list.
value-key = '1S7_GVDASE'.
value-text = '1S7_GVDASE'.
APPEND value TO list.
value-key = '1S7_GVDOOC'.
value-text = '1S7_GVDOOC'.
APPEND value TO list.
value-key = '1S7_GVDOHD'.
value-text = '1S7_GVDOHD'.
APPEND value TO list.
value-key = '1S7_GVVER'.
value-text = '1S7_GVVER'.
APPEND value TO list.
value-key = '1S7_GVVJOB'.
value-text = '1S7_GVVJOB'.
APPEND value TO list.
value-key = '1S7_GVVASV'.
value-text = '1S7_GVVASV'.
APPEND value TO list.
value-key = '1S7_GVVASE'.
value-text = '1S7_GVVASE'.
APPEND value TO list.
value-key = '1S7_GVVOOC'.
value-text = '1S7_GVVOOC'.
APPEND value TO list.
value-key = '1S7_GVVOHD'.
value-text = '1S7_GVVOHD'.
APPEND value TO list.
value-key = '1S7_GCRE'.
value-text = '1S7_GCRE'.
APPEND value TO list.
value-key = '1S7_GCCON'.
value-text = '1S7_GCCON'.
APPEND value TO list.
value-key = '1S7_GCCJOB'.
value-text = '1S7_GCCJOB'.
APPEND value TO list.
value-key = '1S7_GCCJBU'.
value-text = '1S7_GCCJBU'.
APPEND value TO list.
value-key = '1S7_GCCJCO'.
value-text = '1S7_GCCJCO'.
APPEND value TO list.
value-key = '1S7_GCCJIR'.
value-text = '1S7_GCCJIR'.
APPEND value TO list.
value-key = '1S7_GCCJEN'.
value-text = '1S7_GCCJEN'.
APPEND value TO list.
value-key = '1S7_GCCJPI'.
value-text = '1S7_GCCJPI'.
APPEND value TO list.
value-key = '1S7_GCCJSU'.
value-text = '1S7_GCCJSU'.
APPEND value TO list.
value-key = '1S7_GCCJFL'.
value-text = '1S7_GCCJFL'.
APPEND value TO list.
value-key = '1S7_GCCJOT'.
value-text = '1S7_GCCJOT'.
APPEND value TO list.
value-key = '1S7_GCCASV'.
value-text = '1S7_GCCASV'.
APPEND value TO list.
value-key = '1S7_GCCASE'.
value-text = '1S7_GCCASE'.
APPEND value TO list.
value-key = '1S7_GCCOOC'.
value-text = '1S7_GCCOOC'.
APPEND value TO list.
value-key = '1S7_GCCOHD'.
value-text = '1S7_GCCOHD'.
APPEND value TO list.
value-key = '1S7_GCCRD'.
value-text = '1S7_GCCRD'.
APPEND value TO list.
value-key = '1S7_GCCGEN'.
value-text = '1S7_GCCGEN'.
APPEND value TO list.
value-key = '1S7_GCDRI'.
value-text = '1S7_GCDRI'.
APPEND value TO list.
value-key = '1S7_GCDJOB'.
value-text = '1S7_GCDJOB'.
APPEND value TO list.
value-key = '1S7_GCDASV'.
value-text = '1S7_GCDASV'.
APPEND value TO list.
value-key = '1S7_GCDASE'.
value-text = '1S7_GCDASE'.
APPEND value TO list.
value-key = '1S7_GCDOOC'.
value-text = '1S7_GCDOOC'.
APPEND value TO list.
value-key = '1S7_GCDOHD'.
value-text = '1S7_GCDOHD'.
APPEND value TO list.
value-key = '1S7_GCVER'.
value-text = '1S7_GCVER'.
APPEND value TO list.
value-key = '1S7_GCVJOB'.
value-text = '1S7_GCVJOB'.
APPEND value TO list.
value-key = '1S7_GCVASV'.
value-text = '1S7_GCVASV'.
APPEND value TO list.
value-key = '1S7_GCVASE'.
value-text = '1S7_GCVASE'.
APPEND value TO list.
value-key = '1S7_GCVOOC'.
value-text = '1S7_GCVOOC'.
APPEND value TO list.
value-key = '1S7_GCVOHD'. -
I/O timeout all the time on console - what can I do with my hard drive? Macbook pro late 2011
My macbook has been extremely slow for a while and after looking on this site I discovered I should look at the console - and noticed I had I/O timeouts all the time which I gather are a problem.
What can I do with my hard drive? If I back it up using time machine and erase the disk with zeros will the problem continue if I simply restore from time machine?
Or should I invest in a new hard drive - but if I buy a new hard drive is there something on my computer that will wreck that one as well? i use final cut pro/studio a lot and it's got to the stage where I can barely use it - do I need a 7200rpm hard drive? My current one is a 500gb 5400rpm.
I have 16gb of RAM in but since upgrading this from 4GB it made a difference to the speed for all of two seconds then the computer returned to its normal slow speed.
Would appreciate any help on this issue as I'm not particularly technical.I wouldn't worry too much about what the Console logs are showing... although I/O timeouts, if related to reading/writing to your disk may be a problem. I would have to see the whole Console message to know for certain...
Your hard drive is sure to be slowing you down with FCP. Your best bet would be to upgrade to an SSD, if you can afford it. It's the only way you're going to see a real speed increase in FCP as so many large temp/cache files are written to the drive.
If you can't afford a SSD, you may want to look at a 7200rpm SATA III drive (if your MBP supports SATA III - which model do you have? 2011 or later, I'm assuming, since you note that you've 16GB of RAM?).
You should also update your OS to 10.7.5 if your profile reading of 10.7.2 is correct. Won't help speed, but will be more reliable -> http://support.apple.com/kb/DL1582.
Clinton -
Can two people with their own iPhones use the same computer and iTunes?
Can two people with their own iPhones use the same computer and iTunes?
Yes. My wife and I each have our own Apple ID and used the same computer to sync our phones with iTunes. The best way to do this is set up separate user accounts on the computer. If you are logged in to your account on the computer and your wife wants to sync here phone, you would log out and she would log in. These keeps all your stuff separate and avoids a ton of confusion.
-
I have imported my pictures into aperture, how do I export into jpeg files so i can share files with friends who dont use aperture ?
If you want the same export settings on some or all of the images you can select all that have the same export requirements and export them as a group.
If all the images have the same requirements then you can select them all and run the export command. -
Can a 2008 mac book 4.1 use a ssd? Also what is max RAM upgr?
Can a 2008 mac book 4.1 use a SSD? Also what is max RAM upgrade possible beyond 4GB?
Does it matter on the SATA II or III, for the bus?
-
Informix ODBC driver and SQL Expressions
I get an odbc error from Crystal Reports XI when I create a simple sql expression.
Database Connector Error: '42S22: Informix Informix ODBC Driver Informix Column (ofh) not found in any table in the query (or SLV is undefined). Database Vendor Code: -217
I have one table in the report (ofh) and three columns on the report.
My syntax for the sql expression is:
(SELECT xvd.xvd_print FROM xvd WHERE xvd.xcd_id=24 AND xvd.lng_id='0' AND xvd.xcv_id=OFH.OFT_ID)
Where the OFH.OFT_ID is the connection to the table in the report.
If I hard code this value the syntax is ok, but what is the use? I need to have this match the record.
In Crystal Reports 8.5 this syntax works just fine with this same driver.
And I tried double clicking on the column name from the formula editor and all it did was put spaces around the ofh and the oft_id with the period in the middle.
I got the same error.
Show SQL Query u2026 does not work to show me what it builds so I can see what it does not like.
What syntax do I need to use to get the simple sub-select to work the same as it did in version 8.5?
I have to convert all my 8.5 reports to XI and many use this type of feature to get the data for the report.The command file works wonderfully, but my hope was not to completely change each old report but simply convert them and reuse as much as possible.
It seems that the processor that converts the linked tables and the select logic does not function in the same way as version 8.5 does to create syntax for the query when it puts it into the odbc driver.
After more play I found that if I did not use alias names in the sub-select syntax (sql expression editor) I could get the data I needed.
However I have not converted the more complicated reports that use the sql case statement syntax.
I was hoping some one could look at the way Crystal Reports XI was handling the build of the select statement and see what changes where made that seem to no longer let me use the same sql statements I used in 8.5 -
Single detail Record repeated with xml for in wcf sql for xml polling.
Hi,
I am getting a weird results for a inner join of header detail with for xml auto, element.
If I run the query in sql it gives me master detail results as expected. i.e
<HEADER>
<ID>1</ID>
<DETAIL><ID>1</ID></DETAIL>
<DETAIL><ID>2</ID></DETAIL>
</HEADER>
In BizTalk I configured the receive location and added a root node and the namespace to the binding properties.
I get results as.
<HEADER>
<ID>1</ID>
<DETAIL><ID>1</ID></DETAIL>
</HEADER>
<HEADER>
<ID>1</ID>
<DETAIL><ID>2</ID></DETAIL>
</HEADER>
Please Advice.
Thank you and have great day! Vivek Kulkarni MCAD.netHi Vivek,
Took a while to simulate your issue. The usage of "FOR XML AUTO, ELEMENTS" is generally used in the old SQL-adapter. To get this working in the WCF-SQL adapter, you need to have some properties set which is not explored well.
The issue is due to the way you have defined the SQL query and the "InboundOperationType" property of the WCF-SQL adapter. Here is the steps I have done to get the result as you wanted in WCF-SQL adapter, the same output as "FOR XML AUTO,
ELEMENTS " in SQL.
In the binding of the WCF-SQL adapter, select the "InboundOperationType" property to "XMLPolling". The default is "Polling".
In the "Polling Statement", ensure the SQL statement which will give results the XML-output as you wanted. So if you have used following statement in SQL management studio, then use the same statement in the "Polling Statement" property
of the Receive location. Ensure you DON'T remove the "For XML AUTO" statement while configuring the SQL query in receive location. As here you have choose "XMLPolling" as the value for "InboundOperationType"
property, the output of the SQL statement should be XML.
SELECT Header.ID
,Detail.ID
FROM Header
JOIN Detail ON Detail.OrderHeaderID = Header.ID
FOR XML AUTO, ELEMENTS
Note: You can either use SQL select statement or stored procedure. Even if any of these method used to get the resultset from SQL db, ensure it return the output in XML.
Above query is what I have used to simulate your case, you can change it to suit your actual SQL table and column names.
In the "PolledDataAvailableStatement" property I have used the following which would ensure that "Polling Statement" statement executes. I assume you're using this to learn how WCF-SQL adapter works, in real time you may need to update
the query in SQL so that SQL doesn't return the resultset continuously
SELECT top 1 Header.OrderID
,Detail.DetailID
FROM Header
JOIN Detail ON Detail.OrderHeaderID = Header.OrderID
Try the setting, the structure of the output using the above using "XMLPolling" values in "InboundOperationType" property of the receive location binding will be same as the "FOR XML AUTO, ELEMENTS" in SQL. You may need to change
the rootname property to suit your actual expected output.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Specifying Partner Failover in odbc.ini for Linux ODBC driver for SQL Server
Hi,
We are trying to specify the partner failover when making connections via Linux ODBC driver for SQL Server. Do you know a way to specify partner failover in the DSN entry in odbc.ini?
We are using Linux ODBC driver for SQL Server and unixODBC DriverManager.
Our DSN is:
[MyDSN]
Driver=ODBC Driver 11 for SQL Server
Description=MyDSN
Server=MySERVER,<port>
I also tried to use the following connection string in Python (via pyodbc) bypassing the DSN and connecting using the server name.
cnxn = pyodbc.connect("Server=server1,<port>;UID=sa;PWD=<pwd>;Driver=ODBC Driver 11 for SQL Server;Failover_Partner=Server2,<port2>;Database=MyDB")
If the standby DB is on server1 connection fails. It doesn't try server2. If the DB is principal on server1 connection succeeds.
Thank you,
Liviu
LLLHello,
Did you use ODBC Driver for SQL Server to connect to database that uses database mirroring?
According to
the BOL,it does not list "Failover_Partner" as ODBC Driver for Linux connection string keywords.
But ODBC driver for Linux supports
AlwaysOn Availability Groups or Failover Cluster Instance by specify MultiSubnetFailover=True when connecting to a SQL Server 2012 availability group listener or SQL Server 2012 Failover Cluster Instance.
The following case is about similar issue and it seems that ODBC Driver on Linux does not recognize Failover_Partner in connection string. (Not test myself).You can refer to:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6a8b5223-066d-4493-84a3-b5374a32e433/native-client-on-linux-does-not-recognize-failoverpartner-in-connection-string?forum=sqldataaccess
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
SQL CASE statement in XML template- End tag does not match start tag 'group
Hi All,
I am developing a report that has the SQL CASE statement in the query. I am trying to load this into RTF with report wizard and it gives me below error
oracle.xml.parser.v2.XMLParseException: End tag does not match start tag 'group'
Does XML publisher support CASE statement?
My query is something like this
SELECT customercode,
SUM(CASE WHEN invoicedate >= current date - 30 days
THEN balanceforward ELSE 0 END) AS "0-30",
SUM(CASE WHEN invoicedate BETWEEN current date - 60 days
AND current date - 31 days
THEN balanceforward ELSE 0 END) AS "31-60",
SUM(CASE WHEN invoicedate < current date - 60 days
THEN balanceforward ELSE 0 END) AS "61>",
SUM(balanceforward) AS total_outstanding
FROM MyTable
GROUP BY customercode
ORDER BY total_outstanding DESC
Please advice if the CASE statement or the double quotes are causing this error
Thanks,
PPI got this to work in the XML but the data is returning zeros for all the case statements. When I run this in toad I get results for all the case conditions but when ran in XML the data displayed is all zeros. I am not sure what I am missing. Can someone shed some light on this please
Thanks!
PP -
How to use a case statement in where clause
Hi All,
I have a requirement which is to bring all the claims that are created in the last month.So, i wrote a query something like this
select * from claims
where
(Month(ClaimOpenDate) = Month(Getdate())-1 and year(claimopendate) = year(getDate()))
which would give me any new claims created in last month of current year, but this condition fails if we are in the first month of a new year( lets say if we are in 2016 jan then month(getdate())-1 would be 0 and year(getdate()) would be 2016 so we dont
find any records where year is 2016 and month is 0 for claimopen).
So, i would like to use a case statament or something which can help me get around this one.
Can someone please help me with any suggestions?
ThanksHi Jason,
Thanks a lot for your help. This is what exactly i am looking for but i just gave a sample query above below is my original query
select
row_number() over (order by [ClaimNumber]) as DataElementName
,c.PolicyNumber as PolicyNum
, c.FirstName as CustNameF
,c.LastName as CustNameL
,c.PolicyForm as PolType
,'Homesite' as Company
,[ClaimNumber] as ClaimNum
,E.office as Ofc
,e.Supervisior_FullName as Team
, RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FORepF
, case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FORepL
,e.AdjusterID as RepC -- not sure
,CONVERT ( varchar,c.LossDate ,101) as DOL
,convert (varchar,c.ClaimOpenDate,101) as DOR
,rtrim(c.Loss_State) as LossSt
,c.Loss_ZipCode as LossZIP
,c.Loss_City as LossCity
,c.LossType as FOL
,'' as PR
,'' as PRNum
,1 as FeaNum
,'HO' as FeaType
,case when rtrim(c.claimStatus)= 'Closed' then 'Closed' else 'Open' end as FeaStat
,'' as FeaOpen
,'' as FeaClosed
,s.PaymentIndemnityAmount as PaidAmt
,s.ReserveIndemnityAmount as Reserve
,'' as Sub
,'' as Sal
,'' as FeatOwnOfc
,e.Supervisior_FullName as FeatOwnTeam
,RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FeatOwnRepF
,case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FeatOwnRepL
,e.AdjusterID as FeatOwnRepCode
,NULL AS Description --not sure
from [Stg].[HS_DW_RV_Claims] c
inner join [dbo].[Claims_Primary_Adjuster] a on a.CLAIM_NUMBER = c.ClaimNumber
inner join [dbo].[vw_Adjuster] e on e.adjuster_Name = a.primary_ADJUSTER
left outer join [Stg].[HS_DW_LossClaimSummary] s on c.ClaimKey=s.ClaimKey
where c.LoadSource = 'CMS'
and
(s.PaymentIndemnityAmount <>0 or s.PaymentExpenseAmount <>0)
and
ClaimOpenDate BETWEEN DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP) -1, 0) AND DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP), 0)
UNION ALL
select
row_number() over (order by [ClaimNumber]) as DataElementName
,c.PolicyNumber as PolicyNum
, c.FirstName as CustNameF
,c.LastName as CustNameL
,c.PolicyForm as PolType
,'Homesite' as Company
,[ClaimNumber] as ClaimNum
,E.office as Ofc
,e.Supervisior_FullName as Team
, RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FORepF
, case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FORepL
,e.AdjusterID as RepC -- not sure
,CONVERT ( varchar,c.LossDate ,101) as DOL
,convert (varchar,c.ClaimOpenDate,101) as DOR
,rtrim(c.Loss_State) as LossSt
,c.Loss_ZipCode as LossZIP
,c.Loss_City as LossCity
,c.LossType as FOL
,'' as PR
,'' as PRNum
,1 as FeaNum
,'HO' as FeaType
,case when rtrim(c.claimStatus)= 'Closed' then 'Closed' else 'Open' end as FeaStat
,'' as FeaOpen
,'' as FeaClosed
,s.PaymentIndemnityAmount as PaidAmt
,s.ReserveIndemnityAmount as Reserve
,'' as Sub
,'' as Sal
,'' as FeatOwnOfc
,e.Supervisior_FullName as FeatOwnTeam
,RIGHT(e.adjuster_Name ,LEN(e.adjuster_Name)- charindex(',' ,e.adjuster_Name)) as FeatOwnRepF
,case when charindex(',' ,e.adjuster_Name) <> 0 then left(e.adjuster_Name,charindex(',' ,e.adjuster_Name)-1) else e.adjuster_Name end as FeatOwnRepL
,e.AdjusterID as FeatOwnRepCode
,DESCRIPTION --not sure
from Stg.IG_Document D
inner join [Stg].[HS_DW_RV_Claims] c on D.PARENTREF = C.ClaimNumber
inner join [dbo].[Claims_Primary_Adjuster] a on a.CLAIM_NUMBER = c.ClaimNumber
inner join [dbo].[vw_Adjuster] e on e.adjuster_Name = a.primary_ADJUSTER
left outer join [Stg].[HS_DW_LossClaimSummary] s on c.ClaimKey=s.ClaimKey
where c.LoadSource = 'CMS'
and
DESCRIPTION like '%Denial Letter%'
and
ClaimOpenDate BETWEEN DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP) -1, 0) AND DATEADD(mm, DATEDIFF(mm, 0, CURRENT_TIMESTAMP), 0)
So if i use your logic in the end for both the where clauses its been more than 10 minutes and the query is still running however if i use my old method it doesnt even take a second. Looks like its affecting the execution plan. Any suggestions to get around
this one please?
Thanks -
Is it possible to use a case statement when joining different tables based on input parameters?
Hi,
I have a scenario where my stored procedure takes 5 parameters and the users can pass NULL or some value to these parameters and based on the parameters, I need to pull data from various tables.
Is it possible to use a case statement in the join, similar the one in the below example. I'm getting error when I use the below type of statement.
select a.*
from a
case
when parameter1=1 then
inner join a on a.id = b.id
when parameter1=2 then
inner join a on a.id = c.id
end;
Please let me know, if this type of statement works, and if it works will it create any performance issues?. If the above doesn't work, could you please give me some alternate solutions?
Thanks.Here's a technique for joining A to B or C depending on the input parameters. In theory, you are joining to both tables but the execution plan includes filters to skip whichever join is not appropriate. The drawback is that you have to do outer joins, not inner ones.
CREATE TABLE A AS SELECT LEVEL ak FROM dual CONNECT BY LEVEL <= 100;
CREATE TABLE b AS SELECT ak, bk
FROM A, (SELECT LEVEL bk FROM dual CONNECT BY LEVEL <= 10);
CREATE TABLE c(ak, ck) AS SELECT ak, bk*10 FROM b;
variable p1 NUMBER;
variable p2 NUMBER;
exec :p1 := 1;
exec :p2 := 20;
SELECT /*+ gather_plan_statistics */ A.ak, nvl(b.bk, c.ck) otherk FROM A
LEFT JOIN b ON A.ak = b.ak AND :p1 IS NOT NULL AND b.bk = :p1
LEFT JOIN c ON A.ak = c.ak AND :p1 is null and :p2 IS NOT NULL and c.ck = :p2
WHERE A.ak <= 9;
SELECT * FROM TABLE(dbms_xplan.display_cursor(NULL,NULL,'IOSTATS LAST'));
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 0 | SELECT STATEMENT | | 1 | | 9 |00:00:00.01 | 7 |
|* 1 | HASH JOIN OUTER | | 1 | 9 | 9 |00:00:00.01 | 7 |
|* 2 | HASH JOIN OUTER | | 1 | 9 | 9 |00:00:00.01 | 7 |
|* 3 | TABLE ACCESS FULL | A | 1 | 9 | 9 |00:00:00.01 | 3 |
| 4 | VIEW | VW_DCL_5532A50F | 1 | 9 | 9 |00:00:00.01 | 4 |
|* 5 | FILTER | | 1 | | 9 |00:00:00.01 | 4 |
|* 6 | TABLE ACCESS FULL| B | 1 | 9 | 9 |00:00:00.01 | 4 |
| 7 | VIEW | VW_DCL_5532A50F | 1 | 9 | 0 |00:00:00.01 | 0 |
|* 8 | FILTER | | 1 | | 0 |00:00:00.01 | 0 |
|* 9 | TABLE ACCESS FULL | C | 0 | 9 | 0 |00:00:00.01 | 0 |
Predicate Information (identified by operation id):
1 - access("A"."AK"="ITEM_0")
2 - access("A"."AK"="ITEM_1")
3 - filter("A"."AK"<=9)
5 - filter(:P1 IS NOT NULL)
6 - filter(("B"."AK"<=9 AND "B"."BK"=:P1))
8 - filter((:P2 IS NOT NULL AND :P1 IS NULL))
9 - filter(("C"."AK"<=9 AND "C"."CK"=:P2))
You can see that table C was not really accessed: the buffer count is 0.
exec :p1 := NULL;
SELECT /*+ gather_plan_statistics */ A.ak, nvl(b.bk, c.ck) otherk FROM A
LEFT JOIN b ON A.ak = b.ak AND :p1 IS NOT NULL AND b.bk = :p1
LEFT JOIN c ON A.ak = c.ak AND :p1 is null and :p2 IS NOT NULL and c.ck = :p2
WHERE A.ak <= 9;
SELECT * FROM TABLE(dbms_xplan.display_cursor(NULL,NULL,'IOSTATS LAST'));
Now table B is not accessed.
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 9 |00:00:00.02 | 7 | 2 |
|* 1 | HASH JOIN OUTER | | 1 | 9 | 9 |00:00:00.02 | 7 | 2 |
|* 2 | HASH JOIN OUTER | | 1 | 9 | 9 |00:00:00.01 | 3 | 0 |
|* 3 | TABLE ACCESS FULL | A | 1 | 9 | 9 |00:00:00.01 | 3 | 0 |
| 4 | VIEW | VW_DCL_5532A50F | 1 | 9 | 0 |00:00:00.01 | 0 | 0 |
|* 5 | FILTER | | 1 | | 0 |00:00:00.01 | 0 | 0 |
|* 6 | TABLE ACCESS FULL| B | 0 | 9 | 0 |00:00:00.01 | 0 | 0 |
| 7 | VIEW | VW_DCL_5532A50F | 1 | 9 | 9 |00:00:00.01 | 4 | 2 |
|* 8 | FILTER | | 1 | | 9 |00:00:00.01 | 4 | 2 |
|* 9 | TABLE ACCESS FULL | C | 1 | 9 | 9 |00:00:00.01 | 4 | 2 | -
How do I use the CASE statement in the where clause?
Hello Everyone,
I have 2 queries that do what I need to do but I am trying to learn how to use the CASE statement.
I have tried to combine these 2 into one query using a case statement but don't get the results I need.
Could use some help on how to use the case syntax to get the results needed.
thanks a lot
select segment_name,
product_type,
count (distinct account_id)
FROM NL_ACCT
where
ind = 'N'
and
EM_ind = 'N'
and product_type in ('TAX','PAY')
and acct_open_dt between (cast('2006-01-17' as date)) and (cast('2006-01-17' as date) + 60)
GROUP BY 1,2
order by product_type
select segment_name,
product_type,
count (distinct account_id)
FROM NL_ACCT
where
ind = 'N'
and
EM_ind = 'N'
and product_type not in ('TAX','PAY')
and acct_open_dt between (cast('2006-01-17' as date)) and (cast('2006-01-17' as date) + 30)
group by 1,2
order by product_typeSomething like:
SELECT segment_name, product_type,
SUM(CASE WHEN account_id IN ('TAX','PAY') and
acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
TO_DATE('2006-01-17', 'yyyy-mm-dd') + 60 THEN 1
ELSE 0 END) tax_pay,
SUM(CASE WHEN account_id NOT IN ('TAX','PAY') and
acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
TO_DATE('2006-01-17', 'yyyy-mm-dd') + 30 THEN 1
ELSE 0 END) not_tax_pay
FROM NL_ACCT
WHERE ind = 'N' and
em_ind = 'N' and
acct_open_dt BETWEEN TO_DATE('2006-01-17', 'yyyy-mm-dd') and
TO_DATE('2006-01-17', 'yyyy-mm-dd') + 60
GROUP BY segment_name, product_type
ORDER BY product_typeNote: You cannor GROUP BY 1,2, you need to explicitly name the columns to group by.
HTH
John -
Problems with JDBC-ODBC Driver
Hello,
I am trying to access a DSN on my windows with a dedicated DB driver of some company. so i used the JDBC-ODBC connector.
when launching the java code, and debugging the problem i get the following error:
DriverManager.getConnection("jdbc:odbc:priority32;UID=Manager;PWD=keren")
trying driver--className=com.mysql.jdbc.Driver,com.mysql.jdbc.Driver@16caf43--
trying driver--className=sun.jdbc.odbc.JdbcOdbcDriver,sun.jdbc.odbc.JdbcOdbcDriver@66848c--
*Driver.connect (jdbc:odbc:priority32;UID=Manager;PWD=keren)
JDBC to ODBC Bridge: Checking security
No SecurityManager present, assuming trusted application/applet
JDBC to ODBC Bridge 2.0001
Current Date/Time: Tue Aug 12 07:50:37 VET 2008
Loading JdbcOdbc library
Allocating Environment handle (SQLAllocEnv)
hEnv=50338088
Allocating Connection handle (SQLAllocConnect)
hDbc=50338256
Connecting (SQLDriverConnect), hDbc=50338256, szConnStrIn=DSN=priority32;UID=Manager;PWD=keren
*Connection.getMetaData
*DatabaseMetaData.getDriverName
Get connection info string (SQLGetInfo), hDbc=50338256, fInfoType=6, len=300
tabula.dll
*DatabaseMetaData.getDriverVersion
Get connection info string (SQLGetInfo), hDbc=50338256, fInfoType=7, len=300
07.00.0000
*DatabaseMetaData.getDriverName
Get connection info string (SQLGetInfo), hDbc=50338256, fInfoType=6, len=300
tabula.dll
Driver name: JDBC-ODBC Bridge (tabula.dll)
*DatabaseMetaData.getDriverVersion
Get connection info string (SQLGetInfo), hDbc=50338256, fInfoType=7, len=300
07.00.0000
Driver version: 2.0001 (07.00.0000)
Caching SQL type information
*Connection.getMetaData
*DatabaseMetaData.getTypeInfo
Allocating Statement Handle (SQLAllocStmt), hDbc=50338256
hStmt=50339424
Get type info (SQLGetTypeInfo), hStmt=50339424, fSqlType=0
Number of result columns (SQLNumResultCols), hStmt=50339424
value=15
Get connection info string (SQLGetInfo), hDbc=50338256, fInfoType=10, len=300
03.52.0000
Fetching (SQLFetch), hStmt=50339424
Column attributes (SQLColAttributes), hStmt=50339424, icol=1, type=2
value (int)=12
Column attributes (SQLColAttributes), hStmt=50339424, icol=1, type=3
value (int)=129
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
CHAR
Get integer data (SQLGetData), hStmt=50339424, column=2
value=12
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
CHAR(1)
Get integer data (SQLGetData), hStmt=50339424, column=2
value=1
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
RCHAR
Get integer data (SQLGetData), hStmt=50339424, column=2
value=12
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
REAL
Get integer data (SQLGetData), hStmt=50339424, column=2
value=6
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
INT
Get integer data (SQLGetData), hStmt=50339424, column=2
value=4
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
UNSIGNED
Get integer data (SQLGetData), hStmt=50339424, column=2
value=4
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
TIME
Get integer data (SQLGetData), hStmt=50339424, column=2
value=10
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
DATE
Get integer data (SQLGetData), hStmt=50339424, column=2
value=11
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
DATE
Get integer data (SQLGetData), hStmt=50339424, column=2
value=9
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
DAY
Get integer data (SQLGetData), hStmt=50339424, column=2
value=4
Fetching (SQLFetch), hStmt=50339424
Get string data (SQLGetData), hStmt=50339424, column=1, maxLen=130
DECIMAL
Get integer data (SQLGetData), hStmt=50339424, column=2
value=3
Get integer data (SQLGetData), hStmt=50339424, column=3
value=0
Fetching (SQLFetch), hStmt=50339424
End of result set (SQL_NO_DATA)
*ResultSet.close
Free statement (SQLFreeStmt), hStmt=50339424, fOption=1
*ResultSet has been closed
Get connection info (SQLGetInfo), hDbc=50338256, fInfoType=44
int value=0
Get connection info (SQLGetInfo), hDbc=50338256, fInfoType=121
RETCODE = -1
ERROR - Generating SQLException...
SQLState(S1096) vendor code(0)
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Information type out of range
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLGetInfo(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcConnection.checkBatchUpdateSupport(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at WigsUpdate.main(WigsUpdate.java:25)
getConnection returning driver--className=sun.jdbc.odbc.JdbcOdbcDriver,sun.jdbc.odbc.JdbcOdbcDriver@66848c--what can be done?
thank you very muchHimberJack wrote:
oh now i understand.
i got a very unknown company which supplied the ODBC driver, but they dont have java driver...
so I have nothing to do about it?The choices are find a different driver or use the one you have.
The one you have doesn't do batches.
Finding a different driver could involve the following.
- Buying one from somewhere else
- Pay someone to write one.
- Write a driver yourself.
All of those are somewhat dependent that the "unknown company" has an API that supports that. You (or someone) could also figure out the file format of the "unknown company" as well and then write one. -
Can losing connection with an external drive lead to its failure?
My iTunes library is currently wireless, through my Airport Extreme, so I can use it both with my Macbook Air and my iMac. Of course the downside is only one computer can access it at a time and I'm limited by the range of the Airport, but it works for me... Since my library is too big for iTunes Match anyways and I live in a small appartment it's perfect.
Anyways, my problem is, this setup is fairly new, and a few times yesterday while I was working on adding new music to my library (ripping my CDs in lossless), I got the error message that connection was lost with my iTunes drive!
My internet didn't seem to flinch though, which is weird. But it doesn't seem to be the "the disk was not ejected properly" external disk error that's been going around, as I HAVE that **** problem with another of my drives... (connected via cable) and it's not the same error message.
This one is just saying the connection was lost... like Airport had the hiccups or something.
Time for me to click on "ignore" and I could go back to what I was doing.
Except twice, this happened WHILE a track was importing into iTunes!
The first time, I got an error message saying it was impossible to read or write to the device... I was scared... closed iTunes, re-opened... and it looked like nothing happened! Phew. Even the freshly imported tracks were there, up the to one that was importing when it lost connection, which of course wasn't imported.
But then it happened again... while it was, again, importing...
This time, restarting iTunes didn't cut it.
When I opened Airport Utility to check, I had yellow question mark, and a message saying the attached drive was failing, or corrupted, something like that (can't remember), to plug it directly in my computer and repair it!
I did that, opened Disk Utility... and the drive won't mount.
I tried the few tricks I know, still won't mount.
So now I'm in the middle of creating a disk image on one of my other external drives (it's been hours and only a third has been done, I'm crossing my fingers it doesn't just freeze, give me an error message or tell me there's not enough space... because I couldn't check how much space was used since it wouldn't mount... and it has been a while since I checked).
I'm also in the middle of checking for data recovery with my old StellarPhoenix app... not even sure what it could do or if it still works...
But all that to wonder : can a simple network disconnection be enough to do that???
If so, how come people rely on NAS, how come so many use Airport in conjunction with external drives?! It just doesn't make sense to me...
Maybe this was just a weird coincidence? Or maybe I'm taking the problem the wrong way, and the lost connection happened because the drive was failing? In that case I just find it weird that I didn't see any sign of that while it was connected directly to my iMac, right until a few days ago!
...Gee, I'm tired of buying external drives!
For the curious, this one is a 2TB Samsung (Iomega), bought in december 2010, so just 2 years old.Thanks edex67!
Now the question would be, are numerous losses of connection in a day normal for Airport Extreme, or is mine failing?
Can't find a model number and the serial doesn't lead anywhere, but I'm pretty sure it dates back to 2008, the second generation.
A small update: Problem seems to definitely be just in the filesystem since after formatting all seems well, while I can't restore with my disk image, as after hours of scanning it, I now get the error message that Disk Utility can't scan it because of an internal error.
Now let's hope I can save the data, because even though I regularly did backups of that disk, I would still lose those hours of new imports and organization I had just done when it failed...
I'l look for Gparted also... thanks!
Maybe you are looking for
-
Firefox opened today at 5 pm. I closed it when finished, then tried to reopen it about 6 pm - it will not open. I have tried several times in the last hour and it will not open. When I attempt to open Firefox, the 'busy' circle spins for several seco
-
Calls making short 'blip' and disconnecting
Hello everyone, I'm having a strange issue and was wondering where I should start my troubleshooting. (We're using CallManager Express) My receptionist tells me that during the week, randomly and intermittently, when someone calls the main phone line
-
Evertime I try to print from CS5 running iMac w?Maverick CS5 crashes
Running CS5 on iMac with Maverick, every time I attempt to print CS5 crashes.
-
Merged dimension returns summarized values from 2nd query
I have used merged dimension to take fields from 2 quereis.... Both the queries return 30 days of data means 30 records each record corresponds to 1 day. So far its good.. now when I run the queries individually I get 30 days of data as 30 rows in th
-
Huge project in BW (lO Cockpit,FI,CO,AR,TR,LP,AA,FM)
My dear friend Ravi I going to explain to you the importance of mi implementation to know why I send to you allot of questions, me and one person for the client, this project is in 3 months to activate this BCT for LO Cockpit (SD,MM,PM), FI-GL,AP,AR,