Can CRM_DATAEXCHG_BADI be used inbound and outbound?

Hello gurus, I have implemented a middleware solution that replicates fields from CRM to R/3 using CRM_DATAEXCHG_BADI and that seems to work well.
Currently however I am struggling a bit trying to replicate data from R/3 to CRM and I was wondering if it is possible to use CRM_DATAEXCHG_BADI both in the inbound and in the outbound direction?
The alternative which I am currently working on involving CRM0_200 on the R/3 side and SMOUTIL3 on the CRM side is not really working the way I had hoped for.
Best regards,
Anders

Hi Anders,
As per the BADI documentation it has been mentioned its possible. Please refer to CRM_DATAEXCHG_BADI documentation where it has been illustrated with an example.
Regards,
Karthik.

Similar Messages

Why do we use inbound and outbound plugs in abap webdynpro?

hi all,
why do we use inbound and outbound plugs in abap webdynpro?
Thanks

Actually we have 2 types of plugs
1.View plugs
2.Window plugs/Interface Plugs
plugs are for navigating one view to the other and also you can pass the parameters along with the plugs.
Outbound plug is to navigate from one view to other view,also we can pass parameters along with the plug.
Inbound plug is like event handler/receiver of the outbound plug.
Using window plugs we can call other Web Dynpro applications.for more information check this link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
Thanks
Suman

When To Use Inbound and Outbound Interfaces?

I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..
And how to decide when to use a Inbound and Outbound Interface?

Hi Barik,
<b>I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..</b>
WRONG!!!
outbound message->XI->Inbound message...
(sender system)->XI->(reciever system)
remeber: when u r sending some data to XI u send it using outbound interface.
and when u r sending some data from Xi to other system u use inbound interface...
Hope ur doubt is clear!!
regards
BILL
Use a Good Subject Line, One Question Per Posting - Award Points

How to do an inbound and outbound interfacing using UTL_FILE ?

dear members,
How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
regards
sandeep

in/
file/
bad/
done/
out/
file/
bad/
done/
I would start by ftping / putting the file in in/file/ folder, once ftp has completed move it to complete/ folder and process the file. If errorrs are generated move the file over to bad folder. If completed successfully move over to done folder.
Having said that you would use UTL_FILE_DIR init parameter to set your directory.
ALTER SYSTEM SET UTL_FILE_DIR='directory1','directory2' scope=spfile;
Then you would use the regular utl_file packages to read / write to the files.
UTL_FILE.FOPEN and so on.

How to do inbound and outbound interfacing using UTL_FILE?

dear members,
How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
regards
sandeep

Hi Sandeep,
I do not know if I got your question correct.
Here is my understanding of it, pls correct me if I am wrong:
You want to read from and write to the OS from inside the DB? Right?
There are differnt waysa to do so, depanding on your Oracle version:
1. you can use the initialization parameter UTL_FILE_DIR to specify a directory on OS where you can read from and write to through the package UTL_FILE.
2. You can use a directory object in the DB to manage read write access to the OS. This is also usable with the package UTL_FILE as location where to read from and write to.
=> CREATE DIRECTORY my_dir AS '/home/oracle/my_directory';
GRANT read , write ON DIRECTORY my_dir TO scott;
SELECT * FROM dba_directories;
You need CREATE ANY DIRECTORY system privilege for this.
You can use directory objects also for external tables.
With these you can read from flat files in teh directory on OS with a select statement as if it were a table inside the DB.
Does this go into the direction you were thinking of?
Hope it helps for the first.
Regards,
Lutz

Need IDOC inbound and outbound programs

hi,
i am new to xi.
i want IDOCs , inbound and outbound / function module programs for PURCHASE ORDER
and GOODS RECEIPT.
ex: BD10 for material master (matmas01).
thanks and regards
v ijender

for purchase order.
ORDERS / ORDERS04
ORDCHG / ORDERS04
ORDRSP / ORDERS04
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
and also check the below link
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
regards
kummari

Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
Johnny

I think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests.

To Monitor inbound and outbound messages for ECC 6.0 business system

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Degugging Inbound and Outbound idocs

Hi friends,
Can any one help me in debugging Inbound and outbound IDocs?
1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
2.How to find out the outbound Idoc FM and debug it?
Your help is appreciated.
Thanks in Advance.

Hi,
Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
Hope it helps,
SG.

ALE Inbound and Outbound programs

Hi,
Can someone tell me as to how we create the inbound and outbound programs for ALEs??And the cenerio where we use the std FMs and where we use the customs programs for the corresponding action?
Thanks,
Supriya Manik.

Hi,
Go thru this Book : Aravind Nagpal
go thru this links,
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
Idoc's
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm (change pointer)
http://www.erphome.net/pdf/tech/J07.pdf#search=%22ALE%20Change%20pointers%22
http://www.****************/articles/ALE/IDOCExtension/IDOCExtension.htm
Thanks
Sunil

I can create material using inbound Idoc of type MATMAS01, but not MATMAS05

I can create material using inbound Idoc of type MATMAS01 in WE19, but MATMAS05 failed. In fact I used same data ( different material number), and same inbound function, but got different result.
What is different between MATMAS01 and MATMAS05? Is there some configuation need for MATMAS05?
My system is ECC5.0. Thanks.

Hi, nagaraj
this is inbound IDoc, not outbound IDoc, so we can't assign Basic type in WE20, only can assign Message type.
In WE82, there are 5 records about Messagetype MATMAS:
     Message type   Basic type     Release
      MATMAS         MATMAS01        30A
      MATMAS         MATMAS02        30D
      MATMAS         MATMAS03        40A
      MATMAS         MATMAS04        46C
      MATMAS         MATMAS05        470
   I think it should be ok.
In WE57, there 2 records are exist:
   FM_name                 BasicType       MessageType
IDOC_INPUT_MATMAS01       MATMAS01         MATMAS
IDOC_INPUT_MATMAS01       MATMAS05         MATMAS
so I think all configurations should be ok.
Message was edited by:
        liu bin

Creating and Setting up web services for both inbound and outbound comms

Hi
I would like to know the process of setting up inbound and outbound web services using Siebel - is there a tech note /bookshelf article that can guide me through to setting up a 'new/custom' web service.
I have read up on bookshelf that both business services and workflows can be setup/exposed as web services. Now i would like to find out how to do this.
Any help appreciated.
Regards,
TS

As you begin to experiment with web services you should take a look at SoapUI. It is a freeware program that makes it a breeze to test both inbound an outbound web service calls. The bonus is that it can also be used to trace what HTTP is going back and forth along with giving you the ability to chain calls together. That is particularly useful for example if you are learning how to do web service calls within the context of a session. http://www.soapui.com/

Redundancy Design Inbound and Outbound

Please have a look to attached diagram.
I have 2 parts A & B. Part A already exist and running. We are planning to add Part B as show in the diagram.
Part A consists of ASA 5540 and 2921 as Edge Router and Microsoft TMG as Web Proxy for internal users
All other traffic routed to ASA. ASA handles NAT and ACL's
Objective of adding Part B is to have Redundancy Inbound and Outbound. However, firstly I want to focus on outbound redundancy then I will move to Inbound Part.
After adding Part B, TMG will have 3 NIC's. 2 NIC will be connected to ASA's and 1 to internal
For Web proxy fail over I will configure TMG ISP-R feature. But my concern is for other traffic
Therefore, please can someone help me what are best possible ways I can use for outbound failover.
Thanking in advance. I appreciate the help

Any help, please ?

Monitoring of inbound and outbound messages for business system ECC 6.0

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Defining INBOUND and OUTBOUND

Hi Every One,
I have a very small question.
How do we define INBOUND and OUTBOUND?
I got this doubt, when I read some material, sometimes the directions (INBOUND and OUTBOUND) are told as per application systems which participate in message exchange? Sometimes the directions are told as per the XI integratin server.
Which of the 2 methods stated above is correct?
I hope I am clear in what I wanted to convey.
Bye, tschüs, adeu
-Naveen.

Hi NaveenKumar,
You use a message interface to describe a platform-independent or programming-language-independent interface, which you want to use to exchange messages between application components using SAP Exchange Infrastructure. Depending on the communication parameters defined for a message interface, it can either have the task of sending a request (outbound) or receiving a request (inbound).
An outbound interface sends a request message that is only used to make a communication party aware of data sent, without waiting for a response message. In the case of the latter, we also refer to publishing interfaces.
An inbound interface receives a request message that you reply to with a direct response message or whose data you can process in the system without a response.
I guess i have helped you solve your confusion.
Regards,
abhy

Can CRM_DATAEXCHG_BADI be used inbound and outbound?

Similar Messages

Maybe you are looking for