Can CS5 import from a PAL DVD, then burn a NTSC DVD?

Hi, I've looked to see if PAL to NTSC has come up in the forum but couldn't spot it. Has anyone taked the footage from a PAL DVD into CS5? And is it possible to then send that footage to burn a NTSC DVD? Thanks for any help!

The footage will need conversion at some point, and PP may not be the best tool for that job. Try the link below (but try it quick, it won't be up for long). If memory serves, one of the options Dan set up was to convert between NTSC and PAL (or in your case, the other way 'round).
http://www.dv2film.com/

Similar Messages

TA25225 Need to know how to upload a video from a SD card then burn onto a dvd

I have a video on a SD card. I need to know how to upload on IMac and then burn to a blank DVD-R. I know how to copy a disc then burn it to a blank disc. Please help

Does the Video or Card show up in Image Capture?

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

I have bought a Sandisk 8gb memory stick but can't import from iphoto onto it...help???

No I haven't formatted it, but don't really know how to either? I am a bit of a newbie at this and thought i just had to buy any memory stick and it would work. can you suggest how to format it for FAT32 ( I don't know what this is either ) as I will be using the memory stick for windows also at a later date.
Thanks for your reply

Can't import from Cannon HV20.

I can't import from my Cannon HV20. The camera does not show up as an external camera. I just get the message "to import video, please connect a camera". I get the same message when connecting to my laptop and I have tried two different firewire cables. I have gone through the settings on the camera and I don't see anything that would prevent it. I have the camera in play mode and powered on. I have successfully imported from this camera many times. This started yesterday when I plugged the camera in while using ichat and ichat crashed. I suspect the firewire connection on the camera is damaged.
Any ideas?

I have the same problem with a different camera.
I have used my Sony TRV27 Handycam in making movies primarily with iMovie 6.0.3 on my former G5. It did record from the camera to iMovie 7.1.4 on my Intel core 2 but now can't get in to import to either program 6.0.3 or 7.1.4. It will not recognize that the camera is attached or switch the camera icon to camera mode. If it does it only shows Built in iSight or Time Lapses.
I prefer to use the older iMovie camera because of the options and familiarity of it. I do not care for the newer iMovie program format.
I went to the system profiler as suggested and found firewire but have no idea what the Firewire Device Tree looks like nor did I see anything on the right except Firewire Bus speed.
I have been using the cord from Sony in the past to import movies. My computer does not show the camera even though in Finder/Preferences connected services are checked to show up on the desk top.
I phoned Apple Care today and got virtually no help. The gentleman kept saying it was the camera that was at fault. Or it was the ? slot in the computer that wasn't working. They both work. I checked. I see by posts a lot of other camera owners are having similar problems.

Can't import from Sony XDCAM memory card to FCP 6

I can't import from Sony XDCAM memory card to FCP 6.01 HD. Am using Macbook Pro, 2 gig of RAM. This is my first time NOT using tape. I can copy the files off the memory card onto an external drive (to free up the card for pro crew's next day's shoot), but can't import either to FCP. Do I need to convert the files in some way before FCP can read them? Need to fix this problem fast as the crew are off to Nepal for 2 week shoot.

Laura,
First, I'm assuming that you're referring to the XDCAM EX. You'll need to install the FCP 6.0.2 upgrade, which contains the XDCAM EX codecs.
Second, You'll need to install the PDZK-P1 Transfer Application, and use that to import your EX clips into FCP. I just noticed that there is a new version available, 2.5.1 which is labeled specifically for Tiger/Leopard. I haven't tested this version yet, and will report back on any stability issues. We're currently running version 2.1.1, without many issues.

Can't import from LR 3 to PSE 10

Installed Photoshop Elements 10 and can't import from LR 3 for external editing. Any suggestions? I've already tried deleting the LR and PSE .plist files.

So basically I uninstalled Photoshop Elements 10 trial version. I uninstalled LR4 upgrade version. After reading about all the on line grief that people have been having with LR4, why go there? Sounds like more hype with a wopping side order of hooey. Did the online text conversation with Adobe support person prior to logging on to this forum and his only suggestion was call tech support Monday. Uninstalled and reinstalled LR 3.6. Uninstalled and reinstalled PS CS3. Everything works perfectly like it did before. Why or why did I waste all my time with supposedly compatible upgrades? First time I've really been disappointed with Adobe. Hope it's the last.

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

Running LR 5.6 on OSX 10.9.4. Can't import from Canon 7D. Any ideas?

For future reference, if there is an error message, you should probably quote it in your original message on the subject.
"Could not be read" indicates that you do not have WRITE permission to the destination directory when you try to import, so change your permissions.
"not recognized" might indicate the camera card itself is corrupted or the card reader is failing ... or the problem might go away if you change your permissions.

Adobe Photo Downloader stopped working; can't import from a DVD?

I use Premiere Elements 4 (loaded with Adobe Photoshop Elements 6) on Windows Vista.
When I attempt to import video from a DVD (via Get Media > DVD import) I am unable to do so and the message
ADOBE PHOTO DOWNLOADER HAS STOPPED WORKING is produced by Windows.
I would value any help with this problem!
Many thanks, Don Varleyhall

Well, if it was produced in an Adobe program, then it should be 100% DVD-compliant. The menuing structure should not be an issue, as it can with other programs (Roxio and Nero come to mind), or from a DVR-DVD unit. I have never seen one of those that did a DVD-compliant disc.
This might point to something else going on.
As a test, grab, or create a short Project in PrE with Menus, and then Burn it to Disc. Test this back in PrE, and see if it behaves exactly the same way. If not, then something might be odd with your first disc, or there could be some other issue. If the Importer fails again, I'd think about doing a Repair Install.
If the test works, the first thing that I would do would be to Copy your DVD-Video. One can use the free burning utility, ImgBurn to do this, if they do not have Roxio, Nero or some other DVD Copy utility.
As a thought, there are a lot of other programs, that can get in the way of many operations in PrE. You might find some tips on setting up your computer for an editing session, in this ARTICLE. Then, test with your DVD again.
Good luck,
Hunt

How can I import from homemade DVD to iMovie ?

In converting VHS to DV in iMov I use the original 1988 camcorder for obvious tracking reasons. However, I have one tape that was left in the hot sun on my dashboard and, no surprise, is very flaky, but only in camcorder playback. This happened years ago and I had to transfer the (tape only) into a new cartridge. And since I was playing back from a newer VCR it did as well as could be expected. Then last year I put all my VHS tapes onto DVD thru a Panasonic HD/DVD recorder. Since my homemade DVD has no copy protection why can't I import into iMovie? My only other option is to copy from Panasonic to DV tape and then import to iMov and I worry about quality losses with only S video coupling. All my tapes went to HD and DVD in XP mode (1 hour per DVD).

Hi,
See this thread: QuickTimeKirk, "copying dvd to imovie project" #1, 08:53pm Oct 9, 2005 CDT
You'll need to convert the dvd back to a form iMovie can import, details are in that discussion. Hope that helps.
Vicki

This is my first time using iphoto, I am trying to make a slide show that I can then burn to a dvd. The slide show is complete, but I'm not sure where to go now. Can I burn the slide show from iphoto or do I have to export to imovie or idvd?

I have completed the slide show i am making, but not sure what to do now. I want to burn it to a dvd, but not sure if i can do that from iphoto or do i need to export to imovie or idvd? If i need to export, will iphoto save a copy in iphoto? This may be really stupid, but I don't see an obvious way to save my slide show in iphoto. Please Help!

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
NOTE: If you're running iPhoto 9.5 the export options will be different.
OT

Can't import from DVD-R or DVD Ram media from Panasonic Camcorder

I recently bought a Panasonic DVD VDR-D300 camcorder. The device accepts DVD RAM, DVD -R and DVD -RW media. The camera comes bundled with software from Pixela Corp. that allows me to download media to my hard drive (I am using a 1.33 ghz G4 Powerbook with a 60 GB HD, running OS 10.4.5). The Panasonic camera uses MPEG-2 compression. The hook-up from the camera to my powerbook is USB (no firewire supplied). When the camera is hooked up to the Mac, Apple DVD player opens and controls the camera -playback, eject, fast-forward of the media in the camera, no problem. When I want to import the footage into iMovie to edit, the files are not recognized. Doesn't matter if its DVD RAM, DVD -R or DVD -RW media - iMovie can't import it.
I really like the camera - it's got 3 ccd's and looks better than other camcorders in its class. We've got an 11 month old and the main reason we bought the camera was to make movies on iMovie to show him later on down the line. I've got calls into Panasonic about this, but so far nothing. If I can't get it to import into iMovie, I'll probably have to return it for something more mac-friendly.
Would appreciate any and all input on how to remedy this issue. Thanks!

and here's my original standard answer
* DVDxDV (free trial, 25$)
* Apple mpeg2 plugin (20$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast6/7 allows converting to dv/import dvd, hit apple-k
* connect your Camera to a DVD-player and copy to tape/use as converter
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
@mishmumkin:
did you try alt-u for a nice ü ...?

SQL modeler can not import from data dictionary

It was very frustruted to see that the SQL Modeler hang in import from data dictionary of a database as part of revise engineering. I have to question myself if sql modeler is a serious tool and should I give up.

I am not sure if Data Modeller is still in Beta./Production. First couple off initial versions of a new product are normally buggy.
Regards
Alternatively, If this product is still in Beta, then you can contact the development team or report the issue so that they can take care of this issue in next beta release.
Edited by: skvaish1 on Mar 30, 2010 3:18 PM
Edited by: skvaish1 on Mar 30, 2010 3:26 PM

Can't import from camcorder with iMove '08

I'm no longer able to import my movies from my Sony camcorder. I was able to do so in July so I'm assuming there's a problem with the latest software. The camcorder is connected via USB (it show its connected) but iMovie does not come up with the import prompt it used to, nor can I select from Import (it only shows the built-in camera). I have more then enough space, I've tried multiple USB cables, even disconnected everything else, re-booted, powered down the camcorder--everything. Please help, this is very frustrating!

You don't say which camcorder you're using.
Many Canon camcorders will NOT work properly with anything else, e.g; an external disc, on the FireWire circuit. Sorry. For those, you'd need to import to the internal disc and then copy to the external, and continue editing with the external drive.
"..Could it be my firewire drive is too slow to record the video?.." No: all modern external FW drives are perfectly fast enough, and a 320gb is certainly a modern drive.
"..formatted Mac OS extended (journaled).." ..are you absolutely CERTAIN..? ..It needs to be, otherwise it'll do just as you describe. And even discs bought for Macs or from Mac stores generally come formatted as "PC Exchange", i.e; MS-DOS formatted. Check it again by right-clicking or Ctrl-clicking it and use 'Get Info'. If it really says "Mac OS Extended" you're OK. If not, you'll need to use Applications>Utilities>Disk Utility, select the name of the disc and click the 'Erase' tab (after you've moved off the disc anything which you might want to keep) and then select 'Mac OS Extended'. CAUTION: be sure that you've selected the external drive: don't accidentally reformat and wipe your internal drive!
"..Are there any settings I can adjust or other things to try?.." No. However..
Some camcorders are not properly recognised by iMovie at first. It pays to open a project which already has some footage in it, play that and then attach the camcorder and try importing. Playing back some existing DV footage often - in my experience, anyway - 'kick starts' the program into accepting more footage from the attached device.
But that only works if (a) the drive DEFINITELY is formatted as Mac OS Extended, and (b) you're NOT using a Canon with an external disc..

New computer, no backup, can I import from iphone?

My computer crashed and unfortunately I don't have a backup of my iphone. I downloaded Itunes to my new laptop and I'm afraid if I choose Sync I will erase all the contacts/apps/music on my iphone. Is this correct? And if so how can I import all music at least from my iphone to itunes? Will I lose all my phone numbers as well?
Thanks.

It will erase everything.
No backup is not good.
Authorize your computer for your itunes account.
Connect iphone. DO NOT sync.
Click File>Transfer Purchases
Then put in at least one unique contact and calendar entry on the computer. When you first sync, you should get the option to merge the data. Choose it.
Once everything is on the computer make a backup copy of your computer and always maintain it.

I can't import from Itunes into FCP HD

got the capture done with bears hand NOW i can't get audio tune from Itunes to import it says can't recognize file or something like that.
I have a powerbook G4 10.4.9 FCP HD 4.5
is this another case of the 10.4.9 and 4.5 being incompatable (the reason i can't capture from DVCPro)
If my motorcycles ran like this tuff I'd never get out of the garage! thanks for your help in advance. bRAD

It is songs purchased from iTunes that you cannot convert...and that we cannot explain how to convert. Even though YOU might use it for legal purposes, such as temp music or demo reels, we still cannot explain how to bypass DRM on Apple's own site. Doing so would violate their rules.
BUT...if you have a CD of the music, getting songs is much easier:
#5 Imported music from CD or iTunes
Shane's Stock Answer #5:
To get music into FCP, it needs to be an AIFF file at 48khz, 16 bit stereo. So if you want a song from a CD, you go into the iTunes Preferences and set this up under the IMPORTING tab:
File > preferences > importing > import using - AIFF encoder > Setting - Custom
Sample Rate - 48.000 kHz
Sample size - 16 bit
Channels - Stereo
If you have an mp3 that you want to use, then you can convert it thru iTunes as well.
If the piece of music you want to use is something you purchased thru iTunes, I'm afraid I can't help you there. There are copywrite issues that prevent files from being converted into the format that FCP can recognize.
Shane

Can CS5 import from a PAL DVD, then burn a NTSC DVD?

Similar Messages

Maybe you are looking for