Can CWMS import Local CUCM users without LDAP

Hello,
CWMS documentation states that CWMS integrates with LDAP via CUCM LDAP integration. My question is if the CUCM is not AD integrated will the CWMS be able to import local CUCM directory users via AXL?
Thanks
Aamir

Hello Aamir,
the "Directory Integretion" from CWMS is based on an integretion to the CUCM user data base.
So have to pull the data from the CUCM.
Just go to:
Users --> directory Integration
Directory integration can be performed in four steps:
Add CUCM server.
Synchronize now and set up a synchronization schedule.
Enable LDAP authentication.
Notify your users.
Hope that helps
Best regards
Ben

Similar Messages

  • Can't create Local Network Users in Yosemite

    I can't create Local Network Users (or change passwords)
    Logged on to /LDAPv3/127.0.0.1 as directory administrator
    When I try to create a new user (press the [+], fill in the form), it brings up the message:
    existing connection is not authenticated or secure: password change denied
    I suspect this is emblematic of other issues. I can authenticate for Mail and SMB, but not for AFP or Xcode

    So I had this problem last night as well when I upgraded my 10.9.5 OD master to 10.10.
    Two obvious problems after that upgrade:
    1)  Could not add a new Local Network User
    2)  Existing users could not connect via AFP (but could via SMB)
    Through a series of trial and error (and with two Apple Support people...), we found that the following actions seemed to help fix some (but not all) of the problems.:
    Problem #2 seemed to initially be fixed by archiving the OD Master, destroying the OD Master and then reimporting from the archive.  I archived from the upgraded 10.10, but should probably have tried restoring my 10.9.5 archive (which may end up being why I still have some problems...)
    Problem #1 seemed to be solved when I used WorkGroup Manager to reset the password on the Directory Administrator account I use  (I also blew out all references to that account from the Keychain, so everything reprompted me to add that password
    However, we think the root cause of this might have been that in /var/db/openldap/migration, the following "dot" files were still present after the upgrade
    fs:migration root# ls -la
    total 6308816
    drwx------  10 root  wheel         340 Oct 30 18:59 .
    drwxr-xr-x   6 root  wheel         204 Oct 30 18:57 ..
    -rw-------   1 root  wheel           0 Oct 30 18:59 .autossl
    -rw-------   1 root  wheel           0 Oct 30 18:59 .enableODProxyd
    -rw-------   1 root  wheel           0 Oct 30 18:59 .rekerberize
    -rw-------   1 root  wheel           0 Oct 30 18:59 .updateLocales
    -rw-r--r--   1 root  wheel      333436 Oct 30 18:57 authbackup.ldif
    -rw-r--r--@  1 root  wheel      617453 Oct 30 18:57 backup.ldif
    -rw-r--r--   1 root  wheel      617453 Oct 30 18:57 backup.ldif.backup
    -rw-r--r--   1 root  wheel  3228537344 Oct 30 18:59 oldsystem.tar
    Those 4 .dot files were *not* present in that directory on the two other test OD Master servers that I upgraded without issue.
    So we removed them and after having done all the above as well -- I can now add users to the server.   The OD engineer I talked to thought that the presence of those .dot files may have been triggering something to rerun every time PasswordService launched.
    When all was said and done, I was then able to "kinit <mydiradminaccount>" correctly and get a "klist" without issue.
    ALL THAT SAID:  As of this morning, *some* (most?  I don't know yet) of my existing OD user accounts are able to successfully log into the server.   A couple of them (so far) are reporting that their account is "disabled" (which is different from the "shaking"/can't-log-in behavior) -- but they can still log in via SMB -- so I think there was still a problem migrating OD accounts in the upgrade process.
    AND -- I noticed that -- in Server 4.0 -- "change password" is greyed out, so I have to use WorkGroup Manager to change server account passwords. 
    Whee...

  • Converting imported CUCM users to LDAP synch

    We have an existing Unity 8.x implementation that was importing users from CUCM.  We want to enable LDAP authentication for those users.  Is is possible to "convert" a CUCM-imported user into an LDAP-synched user without dropping and recreating them?  I noticed that a BAT export shows the LdapCcmUserId and CorporatePhoneNumber field end up being populated for LDAP imported users.  I haven't tried running a BAT update against these fields to see if it'll push them over to LDAP synch vs. CUCM manual synch.
    Has anyone done a migration like this before?

    Most of my deployments have been LDAP-enabled so I've not tried this but here is the related documentation on how to deal with it:
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac105.pdf
    You have to use BAT...look for the following section:
    To change the LDAP integration status of Connection users who were created by importing from Cisco Unified Communications Manager, see the “Integrating Existing Connection User Accounts with LDAP User Accounts Using Bulk Administration Tool (Cisco Unity Connection 8.5 and Later Only)” section on page 12-6.
    Hailey
    Please rate helpful posts!

  • Import local net users to Cisco Prime 1.2

    Hi,
    We have 4400 WLC that has about 400 local users configured under local net users and we are deploying Cisco Prime 1.2 in our company. Does anyone know how to import these users to Cisco prime? I was told that it could only be done manually like re entering all 400 entries to Cisco Prime! if this is the case it 'll be tedious.
    Thanks for any help.

    Hello,
    Complete the following steps to migrate data from WCS:
    1. Place the WCS export ZIP file (for example, wcs.zip) in a repository or folder (for example, repositories).
    2. Log in as the admin user and stop the Cisco Prime Infrastructure server by entering the ncs stop  command. Configure the FTP repository on the Cisco Prime Infrastructure  appliance using the repository command as shown in configuration  snippet below:
    pi-appliance/admin# configure
    pi-appliance/admin(config)# repository pi-ftp-repo
    pi-appliance/admin(config-Repository)# url ftp://209.165.200.227/backup
    pi-appliance/admin(config-Repository)# user ftp-user password plain ftp-user
    Note: Make sure the archived file is available with the show repository command.
    3. Enter the ncs migrate command in order to restore the WCS database.
    pi-appliance/admin# ncs migrate wcs-data wcs.zip repository pi-ftp-repo
    4. By default, no WCS events are migrated. Enter the ncs start  command in order to start the Cisco Prime Infrastructure server after  the upgrade is completed. Log in to the Cisco Prime Infrastructure user  interface with the root login and the root password.
    For mmore information you can refer to the cisco prime infrastructure deployment guide:
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/deployment_guide_c07-721232.html#wp9000654

  • WLC 7 on 5508 - 802.1x and Local Net Users or LDAP

    Is it possible under the 7 version of the software to use LDAP or Local Net Users for authentication instead of RADIUS for doing 802.1x authentication, and if it is, is there any documentation around that has some configuration information?  I've been doing some poking around and haven't had much luck yet.

    Wireless users on 802.1x?  We're in the midst of testing this with 6.X and 7.X firmware.  So far, no complaints.  

  • Can't import cds onto itunes without computer crashing/shutting down

    hi, everytime i try burn cd's onto itunes my computer either freezes or appears to shut itself down but seems to be still running, i had a similar problem when playing computer games, after a while the whole system would appear to shut down but would be still running (the screens black and nothing can be done until i literally turn it off at the plug then reboot). I think its the converting into "AAC" files it has problems with but im not sure. But if anyone can help me with this problem itd be great, cheers. (p.s. here are my computer specs.)
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Packard Bell NEC 00000000000000000000000
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Video Driver: RADEON 9200 SERIES \RADEON 9200 SERIES
    IDE\DiskMaxtor4R080L0_________________________RAMC1TU0, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomTOSHIBADVD-ROM_SD-R5002________________1033___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomH+_H___DVD-ROMDVD-41SD4.10, Bus Type SCSI, Bus Address [0,0]
    SCSI\CdRomH+_H___DVD-ROMDVD-41SD4.10, Bus Type SCSI, Bus Address [1,0]
    SCSI\CdRomH+_H___DVD-ROMDVD-41SD4.10, Bus Type SCSI, Bus Address [2,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: TOSHIBA DVD-ROM SD-R5002, Rev 1033
    Audio CD in drive.
    Found 10 songs on CD, playing time 44:54 on Audio CD.
    Track 1, start time 00:02:32
    Track 2, start time 04:28:47
    Track 3, start time 08:38:57
    Track 4, start time 11:49:60
    Track 5, start time 18:07:27
    Track 6, start time 22:38:30
    Track 7, start time 25:52:00
    Track 8, start time 30:24:00
    Track 9, start time 36:30:07
    Track 10, start time 39:52:12
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 12 16.
    The drive CDRW speeds are: 4 8 10.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    alright, ive tried importing songs that ive ripped from cds through media player onto itunes but again it crashes, i noticed when i ran the diagnostic it said "If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard" so do you think this may have something to do with it?

  • Can you import local tables into Oracle to query in Discoverer?

    long time lurker, first time poster...
    I've got a local list in excel of over 100k records. I want to bounce this list off our network's data in Oracle to add a few fields to my file. Is there a way to import the local list into Oracle (like I might using MS Access) so that I can query the data using Discoverer, and output my local list with the additional data I pull out of Oracle? Thanks so much for any assistance!

    Hi,
    Create an external table in the database that points to the excel workbook then you will be able to query the excel workbook like any other table in Discoverer. You will need to create a database directory which points to the directory containing the excel workbook. You will also have to save the workbook in a csv format. But once that is set up you will be able to make changes in the excel workbook save them, then refresh the Discoverer workbook and immediately see the changed data in Discoverer.
    Rod West

  • Can I Import H.264 Video Without it Looking Like Garbage?

    I realize that FCE is made for DV, but I've got some nice footage (shot in BetaSP and digitized in a pro edit facility) that I want to import. The original looks really great, but whenever I import into FCE or transcode to DV using QT Pro, the footage degrades so badly that I can't believe it - it's truly not usable.
    My clips are currently in .mov files in H.264 (720x405 res). I have to be doing something wrong. Any help would be appreciated!!
    MB Pro 2.2GHz   Mac OS X (10.4.10)   2GB/160MB

    Try using MPEG Streamclip to convert it to Apple DV/DVCPRO NTSC or Apple Intermediate Codec. I did this recently and the results were very good.

  • Help Need-All of a sudden can't import/open .OMF file without Logic quit

    Hi all. Been a looong time since I posted but I'm back with a serious dilemma. I'm working on a short film with a deadline that's coming at me fast and furious. I just picked up an updated version of the .omf file and all of a sudden it won't load without logic quitting on me. What's going on? My Logic beahavior has seemed a little off but not noticibly disfunctional lately. do I need to toss my prefs? How do I do this if so? I'm always worried I'll delete something I can't recover...
    I think that's about it. Let me know if I need to clarify the situation. This all worked fine a couple weeks ago. I'm using the powerbook 15" template video for NTSC. I'm clueless now and really need help. THANKS!

    Nobody has any idea why this might be happening? Can anybody at least cue me in on how I should go about dumping my LP7 prefs and then replacing them or updating them again?
    thanks!

  • How can I import from a camcorder without it breaking it down into clips?

    I want to archive all my old camcorder tapes before the hardware breaks or becomes obsolete.  If I use iMovie10 it breaks the video down into lots of clips and doesn't even store them in the right sequence.   Is there any way to switch this off and just create a single file of the whole tape?   Google seems to show it used to be possible but on v10 there seem to be only two options under Preferences - speed adjustment and iCloud.  Failing that on iMovie is there a Mac equivalent to Scenalyzer out there at all?
    Thanks

    One thing that I have noticed is that Apples built-in camera is optimized for Face Time, so it sometimes captures at 30 frames per second, but if there is not a lot of motion in the frame, it might use 12 or 15 frames per second. So it has variable frame rates. This is great for FaceTime, but not so great if you are trying to keep the audio in sync.
    The way to fix this is to use QuickTime Pro or MPEG Streamclip to save the movie out with identical specs except to specify 30 frames per second (or 25 in a PAL country).
    I wonder if you are running into a similar problem in QTPlayer. If it is making a variable frame rate movie, you could fix it by dragging the movie into MPEG Streamclip and exporting as the same kind of movie, but with a fixed 30 fps frame rate. MPEG Streamclip is free and quite useful for stuff like this.
    Just a thought.
    Right now my QuickTime Player is hanging so I can't test to see if you could set the frame rate directly in QuickTime Player X.

  • Can't mount Esata as user without booting with it inserted

    When I plug in my NTFS-formatted eSATA drive it is not mounted. If I boot with it plugged in it's mounted but then I have problems during boot. My computer tries to do a filesystem check and it ends with "run fsck manually or press ctrl+D to continue. Not every time but often enough to be a problem.
    I have Udisks installed and I followed this guide from the WIKI: https://wiki.archlinux.org/index.php/Udev
    I have these rules in /etc/udev/rules.d/:
    10-esata.rules  10-my-media-automount.rules  11-media-by-label-auto-mount.rules. Copied from the UDEV wiki.
    If I use USB it's mounted instantly without problems. I am running a fully up to date install of Arch x86_64 with openbox.

    OK. Here's my 10-esata.rules
    [DEVPATH=="/devices/pci0000:00/0000:00:14.1/host4/*",
    ENV{UDISKS_SYSTEM_INTERNAL}="0"/]
    A here's the output of udevadm monitor
    [root@htpc1 jan]# udevadm monitor
    monitor will print the received events for:
    UDEV - the event which udev sends out after rule processing
    KERNEL - the kernel uevent
    Seems like nothing happens. How long do I need to wait?
    Same output with the disk plugged or not.
    Last edited by jai134 (2011-11-30 10:24:21)

  • Is there any way I can message non iphone etc users without going to my phone which will message anyone?

    Help.  When sending messages on my ipad, I always have to send non iOS users from my phone as a SMS .  Frustrating!  They are in my contacts but I guess only for email. Any way around this feature on my ipad?

    Note, that the texting Apps mentioned above will issue a different phone number to you from whcih your messages will be delivered to your Non Apple recipients.    And they in turn will have to sms you to this different number for you to recieve SMS's on your iPad.
    In short its more complex to try to SMS through an iPad that you would think.

  • How to create a new user without any sample objects from any other user?

    Question as the title.
    I had the example dababase installed when I installed the Oracle database.
    Every time, when I create a new user, there will be some example objects coming
    with the new user.
    How can I remove these objects from the new user?
    Or, how can I create a new user without the example objects?
    Thanks in advance.

    I think the easiest way for you would be to use OEM.
    Just locate each object that you want to remove and right click->remove. Don't bother doing this for any indexes as these will be removed when you drop the corresponding tables.
    If you want to try command line through sqlplus then identify the objects you want to remove by selecting from the user_objects view while logged in as this user. This will give you the name and type of object. Then issue the relevant drop command.
    It's probably worth making sure you have a valid backup first, just in case things go wrong!

  • How can I import images from iphoto with the albums and folders?

    How can I import images from iphoto without losing the albums and folders I already created?

    In Organizer, you can choose File>get Photos and Videos>From iPhoto.
    Importing from iPhoto'09: If in iPhoto, you organize your media using photo references, that is, the media actually does not reside inside iPhoto library package, and are referenced through original locations, Organizer does not create new copies of those media and just refer to the original location. but if your iPhoto media reside inside iPhoto library, Organizer creates a copy all media in your pictures folder, also imports albums and tags and other metadata.
    Importing from iPhoto'011: In this case, Organizer always creates a copy of your photos in your pictures folder which resides inside iPohto package. It does not import the albums and other metadata like star rating, caption etc.
    Hope this information helps!
    regards,
    vaishali

  • Can Flex see Local Resources?

    I am looking at Flex as a new development platform for my
    Point of Sale system. The requirements are:
    It must be a internet application that can also access local
    client devices without poping up message. I need to be able to
    print to two local printers, send data to a local display pole and
    read data from a USB attached digital scale and a USB attached
    credit card / check imager from MagTek.
    Does flex allow for this?
    Thanks, Jeff

    I would build it in AIR, which you can do via Flex. This way
    you have a nice installable program that will be able to access
    client devices without a problem.

Maybe you are looking for