Can data be loaded from Cube to DSO

Hello,
Yes,it can be loaded...all you need to do is the follow the same procedure of source and target as you do with the normal flow,...there is no different with cube as data source...you can even schedule delta from the cube to the DSO.
Thanks
Ajeet

Similar Messages

Can data be loaded in BPC via eSOA Services?

Can data be loaded in BPC via eSOA Services? If so, how?

Data can be loaded in BPC via eSOA Services.
To explain how to do that you first should have the public interface which can be provided on request by support(help desk)
You will see all the public interfaces which can be called from application server and you will be able to see some functions from data manager.
Regards
Sorin Radulescu

Problem during Data Warehouse Loading (from staging table to Cube)

Hi All,
I have created a staging Module in owb to load my flat files to my staging tables.I have created an Warehouse module to load my staging tables to Dimension and Cube that I have created.
My senario:
I have a temp_table_transaction which had loaded my flat files to it .This table had loaded with 168,271,269 milion record as through this flat file.
I have created a mapping in owb which loaded my temp_table_transaction which has join with other tables and some expression and convert function that these numbers fill to a new table called stg_tbl_transaction in my staging module.Running this mapping takes 3 hours and 45 minutes with this configue of my mapping:
Default operation mode in running parameter of Mapp config=Set based
My dimesion filled correctly but I have two problem when I want to transfer my staging table to my Cube:
#1 Problem:
i have created a cube is called transaction_cube with owb and it generated and deployed correctly.
i have created a map to fill my cube with 168,271,268 milon recodes in staging table was called stg_tbl_transaction and deployed it to server (my cube map operating mode is set based)
but after running this map it did not complete after 9 hour and I forced to cancel my running's map by kill its sessions .I want to know this time for loading this capacity of data is acceptable or for this capacity of data we should spend more time.Please let me know if anybody has any Issue.
#2 Problem
To test my map I have created a map with configure set based in operation modes and select my stg_tbl_transaction as source with 168,271,268 records in it and I have created another table to transfer and load my data in it.I wanted to test the time we should spend on this simple map but after 5 hours my data had not loaded in new table.I want to know where is my problem.Should I have set something in configue of map or anothe things.Please guide me about these problems.
CONFIGURATION OF MY SERVER:
i run owb on two socket xeon 5500 series with 192 GB ram and disks with RAID 10 Array
Regards,
Sahar

For all of you
It is possible to load from Infoset to Cube we did it, and it was ok.
Data are really loaded from Infoset (Cube + master dat) to cube.
When you create a transformation under a cube Infoset is proposed, and it works fine ....
Now the process is no more operationnal and i don't understand why .....
Load from infoset to cube is possible, i can send you screen shot if you want ....
Christophe

Data not loading from R/3 to BW

Hello
I am a new user in SAP BW, but i am quite familiar with it now. I am trying to load or extract data from the SAP r/3 system to the BW system. When i check the value of my extractor in rsa3 , i can see the records. But when i try to load into the cube in BW , it shows in my monitor " Not yet completed/warning" and "0 from 0 records" . My status is yellow in my details tab(though "REquests" message is green) I am using BW 3.x. It remains like that for a day and then the status changes to red without the data being loaded.
Can anyone help me out with this? I tried a lot of things, but still not able to find a solutions to this?

Hello
Well i know it doesnot even come to the PSA.. ! because I had tried that earlier, it still says the same.
I had tried activating also again , but with no success
The error message in the "Status" Tab is as follows
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Error messages in the "details" tab is as follows.
->Overall Status:Missing Messages or Warning
   -->Requests (messages):Everything OK (green)
   -->Data Request Arranged(green)
   -->confirmed with :Ok (green)
-> Extaction (messages) missing messages
   -->Missing Messages: Request Received (yellow)
   -->Missing Messages: Number of sent records(yellow)
   -->Missing Messages:Selection completed(yellow)
->Transfer (IDocs and TRFC): Missing messages(yellow)
->Processing (DataPacket): no DAta(yelloW)
These were the errors
Hope this would help in finding a solution.
Thanks and Regards,
Justin

Data not loading to cube

I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
The load I am making is full repair
Can someone assist
Thanks

Hi Akreddy
I am not sure "Repair full to Cube"...!
Still the following is my opninon abt your issue...
It seems there is some miss map ..Just one quick check in the DTP monitor in which step your getting 0 records . Is it Data package level or transformation level or routine level..
Identify the step where the transfered records is nullifying then dig through the step..or post the waning or message in this forum so that its pretty easier to get answered..
Hope its clear a little..!
Thanks
K M R
"Impossible Means I 'M Possible"
Winners Don't Do Different things,They Do things Differently...!.
>
akreddy wrote:
> I am loading a cube from a cube. There is data which meets my info package selection criteria in the source cube but I get 0 records transferred, added to the cube. There is no delete in start routines.
>
> Just before loading I have selectively deleted all records from the target cube so as to not disturb existing delta mechanism
>
> The load I am making is full repair
>
> Can someone assist
>
> Thanks
Edited by: K M R on Aug 16, 2010 2:01 PM

Load from cube to planning area

Hi,
We are facing a problem in loading data from Cube to planning area, we need to distinguish between the Zero and the blank values in planning area when loading data from cube to planning area.
Scenario is like this.
For a CVC u2013A on day D I am having key figure value as blank and on D1 is Zero and on D2 is 2, I want the same to appear as my planning area data If I load this data to cube my day D value will appear as Zero (but it was blank) and on D1 Zero and on D2 as 2 in cube.
I am using Std T-code /SAPAPAO/TSCUBE to load data from cube to planning area, in std T-code we are having option of ignore Zero, if I use this it will also stops the actual zero value(which I need) on day D+1 to come in to planning area which I donu2019t want.
I want my planning area data to be as blank on day D and Zero on D1 and 2 on D2 after loading data from cube to planning area..
Can any one put some light and help me out from this issue.
With regards,
Sreerama

Hi Seerama,
I am not sure to understand completely the issue: do you have an issue in the cube or in the planning area?
In order to differentiate a blank for a zero in the planning area, you need to set the flag "zero allowed" in the planning area settings. (in the tab keyfigure, click details, then for each key figure you can select or not the flag "zero allowed")
When you load the data, you should indeed not flag "ignore zero value"
If the issue you have is in your cube (between the file and the cube) then it is another matter...
Kind Regards,
Julien

How to automize data transactional loads from BW to BPC 7.5

Hi ,
How can I automated the data loads from BW to BPC as nightly loads. If the data coming over to BW cube as delta, how can I handle that in BPC. Appreciate on any inputs.
Thanks,
Vara

There are several different ways to automate BPC processes but I would recommend creating a Data Manager Package (set all code in the prompt variable in the advanced DM options) then you can go to the BW backend and run program UJD_TEST_PACKAGE or UJD_TEST_PACKAGE_LINK (SE38). Create a variant for the needeed program and DMP combination and call it from a process chain using the ABAP Program Process Type.
There are several How-To articles describing this process
[Automate MD Load|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827?quicklink=index&overridelayout=true]

DTP - Load from cube to cube - Setting "Use aggregates"

Hi all,
what exactly does the setting "Use aggregates" on the extraction tab in a DTP which loads data from Cube to Cube mean? The F1-Help didn't really bring me any further...
Thanks to any answers in advance!
Kind regards,
Philipp

Hi,
U can update data from from one data target to other data target through data marting.
right click ur ODS or Cube from where u r updating data to other target and select the Generate export data source. then it will create a data source with the name 8forllowed by ur data taget name. there after assign ur data source to ur infosource. and then create Update b/n the targets and then select the update data to other data target from where u r updating.
select the type of update. and then load it from ur IP.
regards-
MM

Data Not loaded from ap_invoice_lines_interface to the base table

Hi ,
Please I'm working on Interface which load invoices from Cobol system to oracle , anyway procedure is working on fine & all data is loaded to the interface as i'm inserting 4 attributes which is DFF on the invoice line level
Now when i ran the import program all data is loaded to the base table except one of the attributes isnot loaded .
will anyone tell me what is the reason or how can i trace that ..........
Thanks In Advance

Dear All ,,,,
Please i got it's a matter of size of the attribute1 segment i increased it ,,,,,,,,,but now the issue that data is saved in the base table but not showing in the screen
will you please help me in that
Edited by: miro_feps on May 21, 2012 1:01 AM

Error in DTP loading from 1st level DSO to 2nd level DSO

Hi Experts,
I am facing a strange kind of error while loading data through a DTP included in Process chain.
We are loading full load, from a DSO to a target DSO.
But it gives an error, "Error in substep : Start routine".
When i checked the error logs, it redirected me to the start routine, where a deletion statement is written.
We checked, with some ABAP persons, the code contained no error.
So we repeated the DTP(right click and repair), it worked fine this time.
There are several other DTP, with the same source and target.
As per the client requirement, we divided the loads and not loading at once.
The same error happened with other DTP also, but repeating them solved the problem again.
As this is only a work around, but it makes no sense as it had to be done manually everytime even though it is scheduled using a process chain.
Any one who has encountered similar problem, please share idea/information with me.
Regards,
Ajay

Hi,
I had the same problem before, to debug the code, i put break point in the routine and couldnt find any error. Then loaded the data, it failed again. then I removed the break point from the transformation and activated it. When ever we activate transformation, a program is generated, if the program is not generated then this kind of problem occurs.
Thanks
Srikanth

Can data be recovered from a crashed HD?

My friend has an 3rd Gen iMac G5 (iSight) that appears to me the HD is out of. I can boot up with an external HD and go to Disk Utility and the internal HD does not show up. I tried resetting SMU and PRAM and other things before that with no luck. If the internal is indeed shot, can an expert recover anything form it, i.e. photos?

!http://i46.tinypic.com/2nvn6f.gif!
"internal HD does not show up."
Could be a sign of directory damage. The following should be used to repair:
DiskWarrior
Highly recommended for *directory damage* repairs.
TechTool Pro
Multi-functional utility.
Drive Genius Multi-functional utility.
You will need to make your own decision on which to purchase. Read up on them on their websites because each does something a little different.
You must use the versions that are compatible w/your OS system & keep the utilities updated to avoid damaging/harming/trashing your system.
"can an expert recover anything form it, i.e. photos?"
Yes but very expensive. If possible check out the following:
"Data Rescue II" from prosofteng.com has a free download demo available.
You will need to follow/read the directions carefully.
VirtualLab™ Data Recovery has a free download demo available.
DriveSavers Data Recovery is NOT free. However, they have a toll free contact phone #, international phone # & fax contact #'s.
Also helpful Recovery Tips and Disaster Recovery for important precautions to prevent further data loss on their website.
http://www.stellarinfo.com
Stellar Phoenix Macintosh -- Mac data-recovery software -- recovers data from damaged, deleted, or corrupted volumes, and even from initialized disks. An exhaustive scan of the drive is performed to locate lost partitions. All found data in the lost partition is then presented in a tree structure so that you can copy your lost files to a working volume.
FREE DOWNLOAD DEMO
FileSalvage
*FREE* Download DEMO
!http://i50.tinypic.com/izvwo1.gif!

How to load master data hierarchy load from BI to BPC 7.5 NW

Hi,
I am testing master data hierarchy data upload from BI to BPC. However when i run master data hierarchy mport package, it's always displaying a warning message saying that no records are returned from "Z_PFT_CTR" which is my info object name.
My transformation is as below.
0BUS_AREA=BUS_AREA
0COMP_CODE=COMP_CODE
0CO_AREA=CO_AREA
0LOGSYS=LOGSYS
0OBJ_CURR=OBJ_CURR
0PROFIT_CTR=PROFIT_CTR
0RESP_PERS=RESP_PERS
0RESP_USER=RESP_USER
Conversion is as below
ID=ID_CONVERT.xls
PARENTH1=HARI.xls
Hierarchy i have mapped in conversion file from Source Inforobject 1000PCDUMMY-1 to BPC PARENTH1 Destination.
Any suggestions plz?

Hi,
Just follow the docs in "How Tou2026 Automate BPC 7.0, version for the NetWeaver Platform Master Data Loads from BW to BPC"
where you will get detail step-by-step procedure to load data.
Check the url:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
Before that you have to transport into BPC system the load to work fine.
Thanks
Debasisha

Data not loaded to cube from DSO

I activated the standard RPM Financial Planning cube 0RPM_C05. When I do the data loads (not DTP) data requests are sent to DSO. Request status is success and data is active and is available for reporting. However these two DSO are mapped to Info cube (standard content) and I dont see data there.
I don't see any errors in the monitor.
Data sources - 3.x
DSO - 0RPM_DS07 and 0RPM_DS08
Cube - 0RPM_C05
Thank you,
Vasu
Edited by: Subramanya Srinivas Mullapudi on Mar 4, 2010 8:44 AM

Hi Raja,
Thanks.
The problem is though the update automatically option is set, the data is not getting loaded.
I used the manual update 3.x data to targets now and it worked. I see the data in the cube.
But how to set this in Process chains. Is this (update 3.x data to targets) the same as Update DSO Data (further update) process type?

Data not loading to cube copied from 0sd cubes

hello everyone,
wen ever im trying to load data from r/3 into a cube which is created by copying from a 0sd cube, everything is running successfully, info package, dtp, transformations and all, but when i look into the contents tab, it says this is not a basis cube, can anyone explain pls.
thanks in advance

Hi
Some one changed the settings of your cube from Basic cube to transactional cube ( real time infocube in IP)
Change it from transactional cube back to basic cube..This error will not come
Regards
N Ganesh

Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

Hi All,
I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
2 of the DTP loads are extracting the data from 3 PSA requests.
But, one of the DTP load is filtering on ONE PSA request.
So, we are not getting the full data into DSO.
Can some one pls help me why the DTP load is beheaving like this ???
Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
Cheers,
Nisha

Hi Jr,
Sorry for late reply.
I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
I have changed it now and its working fine.
Thanks,
Nisha

Can data be loaded from Cube to DSO

Similar Messages

Maybe you are looking for