Can deleted objects from pcd can restored ?

Hi all,
Is it possible to restore the objects deleted from pcd in any way.
please help me out it's urgent.....
Thanks all...
Sarang Pawar

Hi Sarang,
the only way to keep your new changes, is to restore the backup on another machine (ie: VMWare), which might be tricky but possible, and transport the objects from there.
Hope this helps,
Robert
PS: Feel free to use the stars for saying thanks here on SDN!

Similar Messages

Deleting objects from the stage

Hi all,
I've got some items on my stage that I'm removing with
RemoveChild(). The items no longer show, however, as stated in
LiveDocs, the item is not actually destroyed. This means any
bindings/listeners created by that object are still in existence
and are creating errors (Specifically, I'm getting "The supplied
DisplayObject must be a child of the
caller").
LiveDocs mentions that if I want to actually delete an object
from the stage entirely, I should use the "delete operator", but
for the life of me, I can not find any documentation on the
existence of such an operator. Any advice would be much
appreciated.
-Hob

It IS ridiculously hard to find. Searcing Live Docs for
delete oprator will turn up a slew of hits, but which is the right
one?
This is from old docs, but it is still valid:
http://livedocs.adobe.com/flash/8/main/00001865.html
Tracy

Deleting objects from MDS

Hi.
I want to know if and how we can remove/delete objects already loaded into MDS.
The context is old or obsolete objects which are not used any more but still sitting in MDS.
Thanks and Regards,
Jyotideep Singh (JD)

Hi All,
I have included my own folder in ${AIA_HOME}/AIAMetaData/AIAComponents and want to save it in MDS by running ANT command for UpdateMetadata.xml but it is not saving it. It is saving only files not directories. I have mentioned the UpdateMetaDataDP.xml file here. Please let me know how can I resolve this issue.
Following are the steps I followed:
1> I moved all the folders in ${AIA_HOME}/AIAMetaData/AIAComponents which I wanted to be there by FTP.
2> I updated the locations in UpdateMetaData.xml file (Please see the content below).
3>Ran ANT command for UpdateMetaData.xml file.
4>Result was Build Successful.
5> If you see the file below, in first UpdateMetaData tag, I want to save all the subdirectories and files under Manufacturing but it is not doing so.
Same is the case in other tags.
Kiindly suggest the steps as it is hampering our development work.
----------------------------------------------------------------------UpdateMetaDataDp.xml-----------------------------------------------------------------------
<?xml version="1.0" standalone="yes"?>

<DeploymentPlan component="Metadata" version="3.0">
<Configurations>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseBusinessServiceLibrary/Industry/Manufacturing/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/ApplicationObjectLibrary/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseObjectLibrary/Industry/Manufacturing/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseObjectLibrary/Infrastructure/OAGIS90/*.*" />
</fileset>
</UpdateMetadata>
<UpdateMetadata wlserver="fp" >
<fileset dir="${AIA_HOME}/AIAMetaData">
<include name="AIAComponents/EnterpriseObjectLibrary/Infrastructure/Custom/V1/CustomMeta.xsd" />
</fileset>
</UpdateMetadata>
</Configurations>
</DeploymentPlan>
Thanks,
Dhiraj Mishra

Deleting Objectives from Appraisal Document

Hi All,
I have a criteria group called behavioral competences placed in my document, now a free enhancement is assigned to allow the user to select a qualification from the qualification catalogue and place it in the document.
However if a user adds an objective by mistake is their a possiblity to delete this specific objective, because when i assign deletion of element it is assigned on the VB level, and thus the user can either delete the whole behavioural section or keep it all, to me that does not make sense I'm sure im missing something here. Any Ideas ?
Regards,
A. Salah

Hello Ahmed,
If you have a free enhancment to add new criterias you usually add a reference attribute and this one has to have also the field 'deletion of an element' set.
Regards
Nicole

Define prefix for objects from PCD

Where and how to define a prefix which can be added in the beginning of a name of iview, roles, etc.

Hello Galina,
By default, the portal allows administrators to create PCD objects u2013 such as iViews, pages, worksets and systems u2013 and enter any string for the objectu2019s ID prefix (namespace). By activating and configuring the naming conventions feature, you can set naming conventions for object ID prefixes.
You can require that ID prefixes be based on the administrator who is creating or changing the object, or on the PCD path of the object.
The naming conventions feature is controlled by the NamingConventionsSrv , which is contained in the com.sap.portal.namingconventions application
The feature controls ID prefixes when an administrator creates an object or changes the objectu2019s ID. It does not check prefixes for the following:
■      Imported content
■      Copied content
■      Content from content mirroring
■      Content created via code
Please read through these links to grasp more information
[PCD ID Prefixes|http://help.sap.com/saphelp_nw70/helpdata/en/b0/2beb7a371c4649b2ceec901248ef31/frameset.htm]
[Namespaces Naming Conventions|http://help.sap.com/saphelp_nw70/helpdata/en/43/6d9b6eaccc7101e10000000a1553f7/frameset.htm]
Hope this helps,
Regards,
Shailesh

Is there a way to create a transport to mass-delete objects from another system?

I am facing a unique issue where I have to generate a transport that will successfully import into an external SAP system and delete over 1,000 objects (reports, data elements, UI elements, transactions, function groups, the whole lot...). All of these objects can be easily looked up because they are in the same namespace.
Essentially, I need to remove all objects with a given namespace via transport.
Is there any way to do this other than manually deleting all of the objects in the source system and adding them tediously to a single workbench request? This would take hours if not days to do manually, especially due to dependency issues.
Thanks for any and all constructive feedback!

Hi,
I did a quick test: created a new package (development class) with one table, one function group using the table in global data definitions containing one function module referring to the table in interface, and one program that's calling the function module and using table in data definitions. Released the transport to Q.
Then, in the second our dev system, I created the same package and TADIRs for the three objects manually (SM30); released transport to Q of that system. Then I manually created transport containing all the three objects, the export log looked like this:
TADIRs in second dev system were gone after export.
Then I added transport to the first development system and imported
- the objects were gone (including their TADIRs) leaving the empty package.
In retrospect, I should have deleted the empty package in second system so it's cleaned up by the same transport.
If you do have access to "clean" system, doing via ABAP the steps I did manually should not be too much of a challenge.
I may have simply gotten lucky and if this works with all objects, for all kinds of dependencies, remains to be seen... though I was until now under impression that import itself doesn't check any dependencies at all... What kind of messages were you getting?
cheers
Janis

Deleting Objects from Frequent Contacts

Hi, I am writing a C3PO to remove certain contacts from a user's
Frequent Contact's list. It is mostly working, however it seem that
Groupwise occasionally freezes after my C3PO has run.
My C3PO creates a new thread on the Ready event, and then proceeds to
process and delete duplicate entries from the Frequent Contacts. The
thread completes without a problem, but then Groupwise will sometimes
lock up a few seconds or minutes later. Other times Groupwise might not
freeze at all. Or sometimes, GroupWise might work fine, but when I quit
Groupwise the window disappears without the process disappearing.
Causing future sessions to not start up.
Is there any known issues concerning removing items from the Frequent
Contacts list. Do I need to tell Groupwise that I have made changes to
the FC or something? Has anyone else experienced similiar instability
from their plugins? Any comments, suggestions?
Thanks.

Just wanted to add some additional information.
The freezing only happens after I delete an item from the frequent
contacts (maybe from other contacts as well, although I haven't tried).
The freezing does NOT happen if I delete the items from within the Ready
event handling routine. So it seems to be related to having a seperate
thread perform the deleting.
The problem with not using a thread, is that the process can take a long
time if the client is not in Caching mode and it doesn't seem reasonable
to make the user wait so long everytime GroupWise starts up.
Any suggestions? Is there another way to get a startup notification and
perform my procedure?
Thanks.
SuperJeff wrote:
> Hi, I am writing a C3PO to remove certain contacts from a user's
> Frequent Contact's list. It is mostly working, however it seem that
> Groupwise occasionally freezes after my C3PO has run.
>
> My C3PO creates a new thread on the Ready event, and then proceeds to
> process and delete duplicate entries from the Frequent Contacts. The
> thread completes without a problem, but then Groupwise will sometimes
> lock up a few seconds or minutes later. Other times Groupwise might not
> freeze at all. Or sometimes, GroupWise might work fine, but when I quit
> Groupwise the window disappears without the process disappearing.
> Causing future sessions to not start up.
>
> Is there any known issues concerning removing items from the Frequent
> Contacts list. Do I need to tell Groupwise that I have made changes to
> the FC or something? Has anyone else experienced similiar instability
> from their plugins? Any comments, suggestions?
>
> Thanks.

How to delete objects created in Integration repository(IR)

Hi,
I have created software componant in SLD and then imported that into IR.
Now i want to delete all objects from SLD as well as IR.
I have deleted theobjects from SLD but i am unable to delete the software componant objects from IR.
Can anyone please let me know how we can delete objects from ID?
Thanks,
Chintan Soni.

Hi,
If you have imported from the SLD into IR you will see the Software Component and one level down you see one or more Software Component Versions.
You can delete the Software Component Versions (one by one) and when you delete the last SWCV the Software Component will also be deleted.
kr
Robert

Dreamweaver deletes objects (and is super laggy)

It took my 2 months to get rid of the slow laggy typing issue and now Dreamever decides to delete objects from my page. Every time I make a link, edit a photos properties, change a table, anything, as soon as it applies the change it deletes the object from the page. Luckuly I can "Command Z" it back but it is the most annoying thing in the world right now.
Also it goes through periods of being super slow to even select and highligh text or tables.
Please get a stable release out and forget all the fancy new stuff without making sure the basic functions work!
I'm on a macbook pro, quad core, 2.6 Ghz, 18gb Ram.

Validate code and fix reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
If that doesn't improve performance, try changing workspaces in DW.
Nancy O.

Transport deleted objects in productive

Hi!
Help, plz.
What is the right way to transport deleted objects (levels, packages...) to PROD system from QUALITY?

Hi Marina,
I would think the right way to transport objects would always be from DEVP (development) to PROD and not from QUALITY else after a period of time it is possible that you might have three systems DEVP, QUALITY and PROD and none of them in sync with each other.
You use QUALITY only for testing/training purposes and not for development purpose.
If you have accidentally deleted objects from Devp, would suggest recreating the same in Devp.
hope it helps

I deleted emails from VIPs and didn't realise they would be deleted from my Mailbox. VIPs does't appear in Mail on Time Machine. Is there any way I can restore the deleted emails?

I deleted emails from VIPs in Apple Mail and didn't realise they would be deleted from my Mailbox. I have tried to restore from Time Machine but VIPs doesn't appear. Is there any way I can retrieve the deleted emails? I also have bachups on an external hard drive.
I have OS X 10.9.2

You can't download pictures from iCloud by logging into icloud.com. If you deleted pictures from camera roll AND photo stream, the only possibility is preforming a restore from an iCloud backup, assuming the backup has the pictures in it. (Many users have been unable to restore and get back their pictures.)
If the restore doesn't have all the pictures, then they are gone.
In the future, use photo stream to sync photos from an iPhone to a computer, then copy the photos on the computer from the photo stream album into a permanent album. Photo stream pics stay there only for 30 days, and only up to 1000 photos are stored. Don't use photo stream as a storage medium, it's only for copying photos from one device to another. Always copy (either via USB cable or photo stream) to a computer and then move to an album.

I lost all my playlists trying to download I tunes 8 and becuase It deleted them from all my devices becuase of music match. I have an Ipod that still has all the playlists can I restore them from that device?

I lost all my playlists trying to download I tunes 8 and It deleted them from all my devices becuase of music match. I have an Ipod that still has all the playlists can I restore them from that device?

Hello!
Do you have a Mac computer with Time Machine backups?

I have deleted playlists from my iphone4 that I wish to restore. The current back up does not contain them either. Can I use a back up from yesterday? How do I find it on my laptop?

I have deleted playlists from my iphone4 that I wish to restore. The current back up does not contain them either. Can I use a back up from yesterday? How do I find it on my laptop?

No iTunes content is included in any iPhone backup. If the playlists are not in your iTunes library, on your computer, they are gone.

I accidentally deleted QuickTime from my computer. Then I did a system restore and retrieved it. Now Itunes can't find QuickTime and will not open. Is there a fix for this without my Ipod?

I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
Thank You
T-BILL

Hmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now?

HT4236 how can i restore a deleted photos from my ipad

how can i restore a deleted photos from my ipad

If the photo was in your Camera Roll album and you have a current iTunes or iCloud backup then you can restore from that backup to recover the photo.

Can deleted objects from pcd can restored ?

Similar Messages

Maybe you are looking for