Can DFM notifiy/email different users for different device errors?

I'm aware how to change DFM thresholds/polling for different devices. I can get notification working fine for "an email".
But,
Can DFM email "joe" for router failures, and "fred" for switch failures?
URL to describe steps would be great!
Might Cisco implement this feature if not already?

From http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/dfm/dfm_faq.htm#67620
Q) Can I configure the Mail Notifier Adapter to send notifications to different recipients depending on the fault type?
A) No. You can send notifications to different recipients, but all recipients will receive the same information.

Similar Messages

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

I Have and iPhone and iPad. How can i use Finder my iPhone for both devices.

I Have and iPhone and iPad. How can i use Finder my iPhone for both devices?

http://itunes.apple.com/us/app/find-my-iphone/id376101648?mt=8
That app is also compatible with the iPad and requires iOS 3.1.3 or later.

HT5622 What does this mean? "can't get email being used by another device."

What does this mean? "can't get email being used by another device."

Goto Finder > Help > type in Trash...
From Finder Help Trash...
" Empty the Trash
Command (⌘)-Shift-Delete
Empty the Trash without any warning or when it contains locked files
Command (⌘)-Shift-Option-Delete
Hold down the Option key, and then choose Finder > Empty Trash "
See here
http://support.apple.com/kb/HT1526
http://www.thexlab.com/faqs/trash.html

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique?

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique and keep them separate. thank you for your help!

This should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards.

CS5 Photoshop - Adobe Save for Web & Devices Error

Hi folks,
I know similar threads exists, but this one is different. For some reason, out of the blue, I can't use 'Save for Web' anymore. When I choose 'save for web', it opens the preview dialog nicely, up until I save & get this error:
"Adobe Save for Web & Devices Error
Could not complete this operation. An unknown operating system error has occurred."
Cleared all my settings, and the error remains.
I uninstalled PS CS5, installed it again... still get this error.
Hope someone knows how to fix it!
Tx!
MacBookPro3,1, running all the latest updates (OSX 10.6.4), CS5 Master Collection.
Luckily still have CS4 Master Collection installed (and Flash CS3).
(I've just got to get this off my chest, CS5 has so much issues that I stopped using it, I'm not getting paid for playing crashtestdummie. Please don't rush any future CS collections and try fixing bugs instead. )

Hi Wade,
Tx, but 99% of my time, I work on my local system (scratch disk also). Already had problems working with the company's network (files get locked or corrupted while trying to save), so we've learned the hard way not to use the network.
I guess that's somewhat expected if you work with a Mac, in a professional Windows environment.
Meanwhile, I'm a step closer in finding a solution myself. A colleague gave me a great tip, if you create an extra user account on the system, you start with a clean library. On my second account, PS CS5 is working just fine. So clearly, something went wrong in my library. Maybe permissions like you've said. At this point, I could try to fix it by copying files from the one user to the other. But I would like to wait for that connect session so they can see what's wrong.

Can a workflow steps and users for the steps be controlled by contributors?

Is it possible to have a workflow that allows contributors to select list of steps and users in the steps? The universal set of steps and users for steps can be defined in the designer mode. But the contributors can decide for a particular content item what steps need to be skipped and the users for the step. But atleast one approver step is mandatory. This is some strange requirement that our client is expecting. Is this possible?
Regards,
Pratap

Hi Pratap,
Short answer: Yes. This has been possible since the Stellent 5.x days (and possibly earlier). We can help you with this if you need services - see our Workflow offerings here: http://bit.ly/b2Ydv6
Or you can do it yourself. For the details you should see "Setting Up Ad Hoc Step Users" in the workflow admin guide (pp 147, section 9-13) http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/workflow_guide_10gr3en.pdf
Remember that a "step" is just a container for a certain group of users to take action on certain kinds of content. So you can have one step but if you loop over it 3 times with a different set of users each time you have a defacto 3 step workflow.
You need 2 things:
1) the workflow plumbing for the selection of the next "step" (and/or group of users) in the workflow (tokens and subworkflows typically)
2) a UI for the end users / contributors to actually make the selections.
For 1) you use tokens that will ultimately resolve to a list of user names who should take action. You might use names (e.g. bcripe) or aliases (e.g. The Legal Team) or other concepts that make sense to the end users who will be participating (e.g. capital expenditure review). Whatever you do the tokens will ultimately yield one or more user ids which become the step users.
For 2) you can use anything that will make those plumbing values available to the UCM workflow engine. Most common is using metadata fields. They're easy, can be displayed only during workflows (using rules and profiles), and fairly intuitive for most UCM users (if there are not too many!!!). However, you can just as easily write web services, BPEL tasks, or CIS integrations that take form or other triggered input from the user and pass those parameters back to the workflow engine. For more complex workflows this is often a good idea especially if you are dealing with people who are only casual users of UCM or who are interacting with content through another primary UI.
Either way, let us know what we can do to help. Workflows are a special passion to us here at Fishbowl and we've got supported software to prove it. http://bit.ly/95Rocu
Warmly,
Billy Cripe
Fishbowl Solutions

Can i use two iphone user for a single apple ID to download apps from iTunes?

can i use two different iphone for a single apple ID to download apps from iTunes?

You can use as many iPhones as you want, there is no limit to the number of devices that can sync to an iTunes account.

Can Signal Express prompt the user for the next ascii file name?

I am using the following to collect data from Thermocouples and Strain Guages in our plant. It allows me to plt data every second, while recording only every 3 seconds to cut down the file size.
Big Loop-
Small Loop-
      Conitional repeat...
      DAQmx Aquire...
      Statistics (mean) Temp...
      Statistics (mean) Press...
      Current Iteration...
End Small Loop-
Save to ASCII/LVM
The problem is that I have to configure the save step as "overwrite once, then append" so I get a single file each time the project runs. How can I get Signal Express to either prompt the user for a new file name with each run or have the ascii file saved into the log directory for that run. As it stands now, the file gets overwritten with each new project run.
Thank you.
new user

Hi crawlejg,
You can set signal express to increment the file being created each time. But if you are looking for 1 new file each time the project runs you will have to use LabVIEW as this advanced functionality is not available in Signal Express. If you need help getting this to work in LabVIEW or have any other questions please feel free to ask!
Sincerely,
Jason Daming
Applications Engineer
National Instruments
http://www.ni.com/support

Can't send email on users in some new country Internet domains

I have following messaging server:
#imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
Last few says I have noticed that I can't send emails on some of international country Internet domains like [email protected] or [email protected] which are relatively new internet domains registered in year 2006.
I am receiving following message:
Server Response: '550 5.1.2 unknown host or domain: [email protected]
After some investigation I find out that I can't send emails also on domain [email protected] which is also domain registered after year 2006.
Obviously I have problem because this internet domains are new and messaging server can't recognize any new internet domain after 2005.
DNS server is working fine I can make domain lookup and probably I have to add this domains somewhere in the LDAP or in some config file.
Problem is that I don't know where I have to add them.

The Sun Messaging server only accepts messages for known top level domains. The list of known top-level domains is defined in the file "......./config/internet.rules"
The lists is updated via Sun Messaging server patches.

How can I open another iCloud account for each devices with the same apple id

my family has 2 iPhones 1 iPad 1 Macbook and 1 iMac. I had all the devices set up with one iCloud under 1 Apple ID. Now things are getting so mixed up with pictures, videos, calendar, notes and reminders etc. 1 iPhone is also unable to sync due to not having enough storage for all our devices. Someone from Genius Bar said we can have iCloud for each device under 1 Apple ID. I backed up all pics. videos notes important docs to my iMac and MacBook then I turned off all iCloud in all of the devices now I need help to create a new iCloud account at least for my 3 mobile devices to end all the confusion. every time I try to click the button "set up iCloud on this device" I always go back to apple site with step by step by step instruction but I keep going around in a loop. Please help

I'm not sure what they told your at the Apple store, but each Apple ID can only create a single iCloud account. If you want separate accounts for all these devices, they will have to be created using separate IDs. Note: you can do this and still share the same ID for other services such as your iTunes store account. The iCloud ID does not need to be the same as the ID used for other services.
To create an account, go to Settings>iCloud and sign in with a different Apple ID. If you want to migrate a copy of the current iCloud data to the different accounts, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; the devices keeping the current account will not be effected by this), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.

How can I unsync email so deleting from one device will not remove it from all devices?

How do I unsync email so deleting from one device will not remove it from all devices?

Sounds like you have an IMAP/Exchange mail account (vice a POP3 account). By design, an IMPA/Exchange account synchronized your mail boxes among different devices. That behavior can't be changed.

I am using my Apple ID on multiple devices for other people. How can I make icloud work only for my devices?

I am using my Apple ID on multiple devices for other people in my family and now I am getting a new iphone and want to take only the information on my old iphone to the new one without the information on the other devices using the same account. Is there a way to do that?
Also, for the future can I use multiple addresses and apple IDs for the same credit card information?
Thanks in advance,
Marian

Ok, so you want to remove data (contacts, bookmarks, calendar etc) from other users from your iCloud/Apple ID?
If you want to use your ID for your family because it is the account everybody uses to buy stuff then you only need to ensure that your apple ID is set up in the store (settings-store) and then the users of each device and put their own apple ID in icloud/message/facetime/etc.
To set up your device, in my opinion, it is best to back up to itunes, and then plug your new device into itunes and "set up as ..." and select the backup from your device. This will import all your data/settings and your new device will be set up just like your old one.
I am not certain about using the same payment method for more than one account.

"SOME" devices can resolve the ALIAS (CNAME record) for a device, but not the REAL name (A record) - Why? How do I fix this?

I'm running the DNS server role on Windows Server 2012 R2 on a physical machine on my home network.
My AD is configured with a non-registered name - let's say it's "home.acme.ca" and the DNS server is configured to host that zone. I also configured a 2nd zone in the DNS server called "myinf.acme.ca". They both run on a physical
server with an IP of 192.168.1.10
The DHCP server on my Cable Modem is configured to hand out 192.168.1.10 as the only DNS server to every device on my network. On my servers (with static IP addresses), 192.168.1.10 is configured as the only DNS server available for them.
I took the DNS servers from my Cable Provider and configured a Forwarder on my server to send name resolution requests to them only if my DNS server can not answer the request - basically for any name resolution request that does not end with ".home.acme.ca"
or ".myinf.acme.ca"
The "home.acme.ca" zone is populated with 'A' records for all of the physical and virtual servers and PC's on my network.
The "myfin.acme.ca" zone is populated with 'CNAME' records that point directly to the 'A' record in "home.acme.ca" - for example, I have a serve named s000abc123ww.home.acme.ca with an 'A' record providing an IP address of 192.168.1.20 and
I created a 'CNAME' (alias) record named 'webserver.myinf.acme.ca' which points to the 'A' record 's000abc123ww.home.acme.ca'
2 of my 6 machines can resolve the alias but not the real name of the server!
.10 is the Domain Controller. All of the other machines (except .98) are members of the home.acme.ca domain.
I attempted to ping 's000abc123ww.home.acme.ca' AND 'webserver.myinf.acme.ca' on the following 6 computers. I used the fully qualified name in all cases.
4 of the below machines are able to resolve BOTH names. The other 2 can resolve the Alias but not the real name!
I don't understand how this is possible, but I would like to fix it...!!! Please help?
.10 - Server 2012 R2 (Physical) - Hosts Active Directory and DNS.
.20 - Server 2012 R2 (Virtual)   - Runs SQL Server
.21 - Server 2012 R2 (Virtual)   - Runs Apache
.22 - Server 2012 R2 (Virtual) -   Runs Apache. This is the device I am trying to ping (s000abc123ww)
.98 - Windows 7 (Physical)
.99 - Windows 7  (Virtual)
.21 (which is configured nearly identically to .20 and .22) can resolve and ping the Alias, but not the real name.
.98 can also resolve and ping the Alias, but not the real name.
The rest of the machines can resolve and ping both the alias and the real name.
All of the Virtual Machines are running under Hyper-V on the .10 physical server.
All the devices are on the same subnet.
Thank in advance to anyone who can help me understand and correct this problem!
Jim

Hi,
CNAME resource records are recommended for use in the following scenarios:
• When a host that is specified in an A resource record in the
same zone needs to be renamed
• When a generic name for a well-known server, such as www, must resolve to a group of individual computers (each with individual A resource records) that provide the same
service, for example, a group of redundant Web servers
Therefore please try to create your CNNAM record in the same zone and try again.
The related KB:
Adding, Changing, and Deleting Resource Records
http://technet.microsoft.com/en-us/library/cc779020(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't send email using yahoo through apple devices, any ideas?

I cannot send an email using yahoo through any of my Apple devices, although email sent get through. It states "connection to the outgoing server ' apple.smpt.mail.yahoo.com' failed.
Does anyone know how to restore?

I am sorry that I cannot help you but I am having a similar problem. I can rec/send email but my email is duplicated and a pop up says that my server is not responding. I have spent most of the afternoon trying to get it corrected. I finally decided to take it to my Apple store next week.
Good luck to us!

Can DFM notifiy/email different users for different device errors?

Similar Messages

Maybe you are looking for