Can doc properties be in sync with a page size change?

I am using the manual.indt template with InDesign CS4, I made a page size change to the template and now the text boxes and everythng else are knocked out of alignment. I need the margins to be 'correct' in relation to the page size, just as they were with the original template. Is there a way to make a page size change and have all the elements within the template synchronize to the change?
Thanx,
Bill

Layout > Layout Adjustment...
If you enable this BEFORE you make a change, much of what you want will likely happen, but it is highly dependent on how frames are set on the page. If they touch guides, they move/change size with changes that affect the guides.

Similar Messages

Just upgraded to an iPhone 4s but can't get it to sync with my Outlook Calender I have downloaded iCloud but that does not seem to have helped/

Can anyone help I have just taken an iPhone4s but can't get it to sync with my Outlook calender I have downloaded to my PC the iCloud software but that does not seem to have helped at all?
Thanks Bazzer50

Do you see your Outlook calendar on the iCloud website?
Do you see your iCloud calendar on your iPhone?
This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks

How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks

You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).

TS1424 Just purchased Beatles' Tomorrow Never Knows. But some (four) of the cuts did not download and can't be played or synced with ipod. Any help?

Just purchased Beatles' Tomorrow Never Knows. But a few of the cuts did not download properly and can't be played or synced with ipod. Any help?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

I rec'd an iPod Nano and can't get it to sync with playlist. I also have Windows 8. I need help!

I have rec'd an iPod Nano and can't get it to sync with my existing playlist. I am using a Windows 8 Dell laptop. Any suggestions?

One iCloud account has one user name (a .mac or .me email name) and password. If you have set up multiple accounts in the past then you must choose one and stay with it. If you don't know the user name, then you have a problem. If you haven't really begun using iCloud (but you mention trying to get mail, so I'm assuming you have used iCloud before), then use a .mac or .me account you know you have or just sign up for a new account - and be sure to write down the name and password for future use.
If you want to use the account to sync your contacts, email, calendars, etc, then each of your ios devices need to use the same account, otherwise they will be independent of one another.

Why can't Outlook for Mac sync with iCal

Why can't Outlook for Mac sync with iCal

Because Microsoft didn't update their software to work with the new OS.

Can itunes be set to sync with your music library?

Can itunes be set to sync with your music library? Everytime i add music to my computer i have to go to itunes and add it. If i move music on my computer then itunes gets lost and i have to add it again and then go back and delete all the broken links in itunes. Is there a better way?

iTunes does not at present have any good feature for watching folders and automatically importing tracks you add to a folder. Using strictly iTunes, unless you drop the tracks into the "Automatically Add to iTunes" folder in the iTunes Music folder, you'll have to add any such tracks manually, by dragging them to the iTunes window or by using the Add To Library command. Here are a couple of potential solutions from other developers, though:
http://albumbrowser.klarita.net/iTunesFolderWatch.html
http://www.lifehacker.com/software/itunes/hack-attack-automatically-sync-itunes- to-any-folders-175161.php
The same applies if you move a track from folder to folder manually; that will break iTunes' links to the track file and you'll have to re-add or relocate it in iTunes.
Thanks to Meg and Hudgie for the tips.

Can more than 1 iphone sync with itunes?

can more than 1 iphone sync with itunes?

mbraase wrote:
This isn't a problem, but a question.
1. Can you sync your iphone with remote to more than one itunes library (such as itunes on 2 different computers)?
Yes you can sync with more than one iTunes Library. I just did it today with the library on my Mac and PC
if so then...
2. Does the itunes have to be maximized for the remote function to work, or can it be minimized on the task bar at the bottom?
On my mac I can play the songs with iTunes minimized.
The reason why, is I want to sync my iphone with my mother's computer at her house, and put some sound effects on her library. Then I want to turn her itunes on and minimize it and wait until she starts working on her pc and then I can play some practical jokes on her making her computer make weird noises (sound effects on itunes).
Any answers would be appreciated by me (but not my mother).
Thanks, and happy pranking to you all

I just purchases an ipod nano. I can not get it to sync with my existing itunes.

I just purchases an ipod nano. I can not get it to synce with my existing itunes account. I am not sure what I am doing wrong. I had no trouble using my ipad or my daughter's ipod touch.

Hi there,
I would recommend taking a look at the information found in the articles below. The first two articles have the same content, but are geared towards either OS X or Windows.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
-Griff W.

Just bought a touch and can't get it to sync with media player

just bought a touch and can't get it to sync with media player

Discussions of jailbreaking are not allowed here, so I'd suggest avoiding the topic or you risk having your posts removed by the Hosts.

How can I force iTunes to sync with an specific folder?

I have all my music in an external drive, but anytime I start iTunes, it go to the folder created in the HDD. How can I make iTunes to sync with the folder in the external hard drive?

You cannot sync the two devices over WiFi at all. You can turn on automatic downloads on both devices in Settings>iTunes & App Stores>Automatic Downloads>Apps>On, whatever you download on one device will download to other device as well.

How can I set up iCloud sync with Outlook 2007 using Hotmail account?

Hi,
I installed iCloud PC control panel. I tried to sync my contacts and calendars from Outlook (2007) to the cloud but I gets this message: "Add an e-mail account to Outlook Before setting up iCloud". I have an Hotmail account synced up into my Outlook via Outlook Connector. Can iCloud sync with Hotmail accounts?
What should I do to get my calendars and contacts synchronize to the cloud. Does Outlook 2007 can be synced by the cloud too?
How can I set up iCloud sync with Outlook 2007 using Hotmail account?

I found a way to fix this, it did the trick for me:
https://discussions.apple.com/thread/3109623
All you have to do is include a new e-mail account [email protected] (set it as a default) on Outlook with the options that are showed in the thread I linked and you should have the calendars and tasks syncronised. It works perfectly with ipod touch, ipad and Outlook 2010 on windows 7.

How can I create one pdf from a FrameMaker Book with mixed page sizes.

Looking for an easier way to create one pdf from a FrameMaker book that has files with different pages sizes; letter and tabloid.
So far, I have not been able to find a way to set up the Adobe PDF printer or Distiller to read the page size from the source files in the book and then create one pdf with the appropriate page sizes based on the file sizes in the FrameMaker book. I can create a pdf of the book using a multi-step process where I create a pdf for each page size and then combine them into one file. This is a lot of work.
Is there a way to set the Adobe PDF printer where it reads page size from the source files and then creates one pdf with a mixed page sizes?
Using FrameMaker 7 and 10 and Acrobat X Pro.
Thanks for any suggestions

http://forums.adobe.com/message/4013068#4013068
http://forums.adobe.com/message/3519366#3519366
http://forums.adobe.com/thread/485331?tstart=0

How to create a report with different page sizes

Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
Marc

Hi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

Can doc properties be in sync with a page size change?

Similar Messages

Maybe you are looking for