Can downloaded oracle9i Enterprise Edition use Bitmap index?
Hello there,
I have a downloaded Oracle9i Enterprise Edition. After I create some bitmap index on a partitioned table, I use the following sql statement to check the bitmap index:
select index_name, index_type, status from user_index;
It tells me that all the statuses of the bitmap indexes are "N/A" (Not availabe). Does that mean I can NOT use bitmap index in this downloaded Enterprise version?
If I must use bitmap indexes, what should I do?
Many thanks in advance!
-wendy
are you creating a local index on the partitioned table?
Similar Messages
-
Oracle9i Enterprise Edition Release 9.2.0.7 downloadable
Hi,
Please let me know where i can i find the downloadable for :Oracle9i Enterprise Edition Release 9.2.0.7 for linux
Thank you,
-Lokanath.Installation package could be downloaded here: http://www.oracle.com/technology/software/products/oracle9i/index.html (only 9.2.0.4 is downloadable).
Then you need download 9.2.0.7 patchset from metalink.oracle.com (you must have paid support for access to this site) -
Hi,
Just wondering if its possible to installe Apex 4 on Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
Thanks
Aali
Edited by: aali on 29-Jun-2010 03:14No. See requirements in Installation Guide:
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/pre_require.htm#BABFCFBC
Thiis is not difficult. -
Oracle9i Enterprise Edition Release 9.2.0.1.0 - OracleSessionStateStore
Hi,
I have the Oracle9i Enterprise Edition Release 9.2.0.1.0 version of Oracle DB installed.
The client is an ASP.net 3.5 AJAX enabled web application using IIS (Developer m/c is XP SP3 with IIS 5.0 installed).
I am trying to use the Oracle Provider for .NET for storing ASP.net sessions in Oracle Database.
The ODP version that i have installed to the GAC and am using is : 11.1.0.7.20
However, once i turn it on via web.config, i get the following error:-
Unhandled Execution Error
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
Exception Details: Oracle.DataAccess.Client.OracleException:
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OracleException (0x80004005)]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure, Boolean bCheck) +2657
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, Object src) +80
Oracle.DataAccess.Types.OracleBlob.get_Length() +609
Oracle.DataAccess.Types.OracleBlob.get_Value() +476
Oracle.Web.SessionState.OracleSessionStateStore.GetSessionStoreItem(HttpContext context, String id, Boolean getExclusive, Boolean& locked, TimeSpan& lockAge, Object& lockId, SessionStateActions& actionFlags) +2395
Oracle.Web.SessionState.OracleSessionStateStore.GetItemExclusive(HttpContext context, String id, Boolean& locked, TimeSpan& lockAge, Object& lockId, SessionStateActions& actions) +54
System.Web.SessionState.SessionStateModule.GetSessionStateItem() +117
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +487
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +66
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Someone else has posted a similar error before but there are no responses to that thread.
Hence i am creating a new thread for this.
Does anyone have any clues related to this error? All suggestions welcome :-)
Thanks!Hi Greg,
WOW..i think that just might be it. That does give me something to look into instead of just tearing my hair out.
I did read the documentation for the 11g Client components when it downloaded it from the OTN and they just had a generic statement saying that it supports 9i provided its release 2.
I found the doc your were referring to (Doc ID 207303.1). Will try out by upgrading to a newer oracle and see if that helps!
Thanks!
Edited by: user8904887 on Jun 22, 2010 1:07 AM -
EURO Support Oracle9i Enterprise Edition Release 9.2.0.4.0 ?
Hi,
Does Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production support EURO?If yes, what should be the data type I need to use to store the same?
I have tried to store the Euro character in varchar2 data type column in the above database.When i tried to retrieve the EURO sysmbol some junk character is coming out.
I am running the Oracle on Solaris5.9 OS.
I have set Character set(NLS_LANG) as UTF8,
Note:I am able to store and retrive the EURO in 9.2.0.3.0 without any problem.
Pls help in this regard,
Thanks in advance,
RaviWhen run the DUMP the following is the output from both versions.I dont know how to interpret the result..
9.2.0.4:
DUMP(SUBJECT)
Typ=1 Len=12: 84,101,115,116,32,69,82,79,32,32,194,172
9.2.0.3:
DUMP(SUBJECT)
Typ=1 Len=19: 84,101,115,116,32,101,114,114,114,114,114,114,114,114,114,32,226,1
30,172
In the second case i able to insert and retrieve the EURO ,
How to interpret the above output,is there anything wrong?
Actually I am not using any client, however i am using Java application to access the data,
I can assure you that Applicationis working fine with other versions of Oracle,
Thanks, -
Oracle9i Enterprise Edition Release 9.0.1.1.1 Data Mining API
Is Data Mining API contained In Oracle9i Enterprise Edition Release 9.0.1.1.1 or in release 2 only?
ThanxNo it is not so simple. This "le signe est sur l'avant dernier octet" means that the sign is last character in number.
The sign "é" and "I" are just in my example and they are somehow calculated but I don't know how?
If I take my example there is field with format S9(13)V99 and with value 00000000071049é (and with last sign "é") and I think the last sign is somehow calculated from number. And then from this value I get the number.
00000000071049é
FFFFFFFFFFFFFFC
000000000710490 => +0000000007104,90
S9999999999999V99
Everything I try, calculating from binary to hex, or anything other, I don't get the result or the last sign and I wonder if there is some function in PL/SQL that I can use to get the result I want?
Or if you have some idea how to help me to get from "00000000071049é" to "+0000000007104,90" from example above?
Here are some other examples, just for help:
000000204592D
000000183882D
000000139441C
000000182979H
000000083361F
000000083361F
000000083361F
000000059033F
000000066273E
000000069011G
000000102615B
000000092362F
000000138215‚
000000138215‚
000000138215‚
000000138215‚
000000106760C
000000106760C
000000106760C
000000115024A
000000115024A
000000115024A
000000115024A
000000115024A
000000088149B
000000084459I -
Peformance tuning of query using bitmap indexes
Hello guys
I just have a quick question about tuning the performance of sql query using bitmap indexes..
Currently, there are 2 tables, date and fact. Fact table has about 1 billion row and date dim has about 1 million. These 2 tables are joined by 2 columns:
Date.Dateid = Fact.snapshot.dates and Date.companyid = fact.companynumber
I have query that needs to be run as the following:
Select dates.dayofweek, dates,dates, fact.opened_amount from dates, facts
where Date.Dateid = Fact.snapshot.dates and Date.companyid = fact.companynumber and dates.dayofweek = 'monday'.
Currently this query is running forever. I think it is joining that takes a lot of time. I have created bitmap index on dayofweek column because it's low on distinctive rows. But it didn't seem to speed up with the performance..
I'd like to know what other indexes will be helpful for me.. I am thinking of creating another one for companynumber since it also have low distinctive records.
Currently the query is being generated by frontend tools like OBIEE so I can't change the sql nor can't I purge data or create smaller table, I have to what with what I have..
So please let me know your thoughts in terms of performance tunings.
ThanksThe explain plan is:
Row cost Bytes
Select statement optimizer 1 1
nested loops 1 1 299
partition list all 1 0 266
index full scan RD_T.PK_FACTS_SNPSH 1 0 266
TABLE ACCESS BY INDEX ROWID DATES_DIM 1 1 33
INDEX UNIQUE SCAN DATES_DIM_DATE 1 1
There is no changes nor wait states, but query is taking 18 mins to return results. When it does, it returns 1 billion rows, which is the same number of rows of the fact table....(strange?)That's not a bitmap plan. Plans using bitmaps should have steps indicating bitmap conversions; this plan is listing ordinary btree index access. The rows and bytes on the plan for the volume of data you suggested have to be incorrect. (1 row instead of 1B?????)
What version of the data base are you using?
What is your partition key?
Are the partioned table indexes global or local? Is the partition key part of the join columns, and is it indexed?
Analyze the tables and all indexes (use dbms_stats) and see if the statistics get better. If that doesn't work try the dynamic sampling hint (there is some overhead for this) to get statistics at runtime.
I have seen stats like the ones you listed appear in 10g myself.
Edited by: riedelme on Oct 30, 2009 10:37 AM -
Database Hung problem in Oracle9i Enterprise Edition Release 9.2.0.7.0
Hello,
I am using the Oracle9i Enterprise Edition Release 9.2.0.7.0. Our database suddenly get hung and we need to give a Hard reset.
Following are errors are in listener log.
TNS-12571: TNS:packet writer failure
27-OCT-2008 00:33:00 * service_died * nm45 * 12571
TNS-12571: TNS:packet writer failure
27-OCT-2008 00:33:13 * CONNECT_DATA=(SERVICE_NAME=<Service>)(SID=NM45)(SDU=2048)(CID=(PROGRAM=<EXE>)(HOST=<Host>(USER=<User>))) * (ADDRESS=(PROTOCOL=tcp)(HOST=<IP>)(PORT=<Port>)) * establish * <DB> * 12560
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown error
Error in Oracle trace:
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 30
Windows thread id: 1172, image: ORACLE.EXE
*** 2008-10-27 00:54:04.300
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:14:38.175
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:22:48.894
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:39:21.800
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 01:50:40.910
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
*** 2008-10-27 02:39:51.285
async error encountered when answering new connection:
NS Primary Error: TNS-12560: TNS:protocol adapter error
What could be the reason.
Regards
HemantHello Hemant,
Thanks for the response. Following error are in sqlnet.log. We are using the static id.
Fatal NI connect error 12560, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 9.2.0.7.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 9.2.0.7.0 - Production
Time: 27-OCT-2008 00:33:13
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Regards
Hemant. -
Hello,
Is there a comprehensive published note from Oracle describing desupport notices for Oracle databases?
Mainly - Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production, 10g r2 and 11g r1?
If so, can anyone provide the link? I do have Metalink access, so a note id would also be good.
Thanks,
RHi,
Please see these docs.
ALERT: Oracle9i Release 2 (9.2) Support Status and Alerts [ID 189908.1]
ALERT: Oracle 10g Release 1 (10.1) Support Status and Alerts [ID 263719.1]
ALERT: Oracle 10g Release 2 (10.2) Support Status and Alerts [ID 316900.1]
ALERT: Oracle 11g Release 1 (11.1) Support Status and Alerts [ID 454507.1]
Thanks,
Hussein -
Oracle9i Enterprise Edition for HP/IA64, Release 2 Install Error
Help Me!
Oracle9i Enterprise Edition for HP/IA64, Release 2 (v9.2.0.2)
Install Error
OS Version : HPUX 11.23
Me English is insufficient.
Until end it reads and week route it wants.
Me the help is necessary.
The oracle before establishing, it established the gcc and the binutil first.
Is the different package necessary?
Error Message(make.log)
=============================================================
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/oracle/app/oracle/product/9.2.0.2
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/app/oracle/product/9.2.0.2
(if [ "compile" = "compile" ] ; then \
/oracle/app/oracle/product/9.2.0.2/bin/gennttab > ntcontab.c ;\
cc +DD64 -c ntcontab.c ;\
rm -f /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ;\
mv ntcontab.o /oracle/app/oracle/product/9.2.0.2/lib/ ;\
/usr/ccs/bin/ar rv /oracle/app/oracle/product/9.2.0.2/lib/libn9.a /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ; fi)
cc: Couldn't open the message catalog: "/opt/ansic/lib/nls/msg/C/cc.cat".
r - /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o
ar: file ntcontab.o is built with mismatched data abi
Stop.
*** Error exit code 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/app/oracle/product/9.2.0.2
(if [ "compile" = "compile" ] ; then \
/oracle/app/oracle/product/9.2.0.2/bin/gennttab > ntcontab.c ;\
cc +DD64 -c ntcontab.c ;\
rm -f /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ;\
mv ntcontab.o /oracle/app/oracle/product/9.2.0.2/lib/ ;\
/usr/ccs/bin/ar rv /oracle/app/oracle/product/9.2.0.2/lib/libn9.a /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o ; fi)
cc: Couldn't open the message catalog: "/opt/ansic/lib/nls/msg/C/cc.cat".
r - /oracle/app/oracle/product/9.2.0.2/lib/ntcontab.o
ar: file ntcontab.o is built with mismatched data abi
*** Error exit code 1
Stop.
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/oracle/app/oracle/product/9.2.0.2
(if [ "compile" = "compile" ] ; then \
/oracle/app/oracle/product/9.2.0.2/bin/gennfgt > nnfgt.c ;\
cc +DD64 -c nnfgt.c ;\
rm -f /oracle/app/oracle/product/9.2.0.2/lib/nnfgt.o ;\
mv nnfgt.o /oracle/app/oracle/product/9.2.0.2/lib/ ;\
/usr/ccs/bin/ar rv /oracle/app/oracle/product/9.2.0.2/lib/libn9.a /oracle/app/oracle/product/9.2.0.2/lib/nnfgt.o ; fi)
cc: Couldn't open the message catalog: "/opt/ansic/lib/nls/msg/C/cc.cat".
ar: file nnfgt.o is built with mismatched data abi
r - /oracle/app/oracle/product/9.2.0.2/lib/nnfgt.o
*** Error exit code 1
=============================================================
Error Message(InstallActions.log)
=============================================================
Exception String: Error in invoking target ntcontab.o of makefile /oracle/app/oracle/product/9.2.0.2/network/lib/ins_net_client.mk
Exception Severity: 1
Exception handling set to prompt user with options to RETRY IGNORE
User choice : Retry
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ntcontab.o of makefile /oracle/app/oracle/product/9.2.0.2/network/lib/ins_net_client.mk
Exception Severity: 1
Exception handling set to prompt user with options to RETRY IGNORE
=============================================================Hi,
I had installed Oracle 9.2 on HP-UX 11i and the configuration assistants failed to start and it showed me the same errors. Can you tell me how did u solve u r problem.
Thanks
Satish -
when we will use bitmap index in oracle?
hi,
you can take a look this documents
http://dylanwan.wordpress.com/2008/02/01/bitmap-index-when-to-use-it/
http://www.oracle.com/technetwork/articles/sharma-indexes-093638.html
regards, -
UNABLE TO SET parallel_automatic_tuning=TRUE IN Oracle9i Enterprise Edition
Hi,
i am trying to set parallel_automatic_tuning=TRUE . but i am unable to set it.
My oracle version is as below.
SQL> SELECT * FROM V$VERSION;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
Please help to resolve this issue.
thanks
sivasankar.hi i am unable to set the value as true for parallel_automatic_tuning parameter. ,
SQL> SHOW PARAMETER PARALLEL
NAME TYPE VALUE
fast_start_parallel_rollback string LOW
log_parallelism integer 1
parallel_adaptive_multi_user boolean TRUE
parallel_automatic_tuning boolean FALSE
parallel_execution_message_size integer 2148
parallel_instance_group string
parallel_max_servers integer 5
parallel_min_percent integer 0
parallel_min_servers integer 0
parallel_server boolean FALSE
parallel_server_instances integer 1
NAME TYPE VALUE
parallel_threads_per_cpu integer 2
recovery_parallelism integer 0 -
Does JMQ 3.5 SP1 Enterprise Edition use Java NIO anywhere?
Hi,
I was wondering, does anyone know whether JMQ 3.5 SP1 Enterprise Edition uses Java NIO anywhere?
Cheers, AndrewYes ...
java.nio is not used on the client (because it needs to support older
jdk's), however we do use nio on the broker.
java.nio is used:
- in the "channels" support in the shared thread pool to allow
non-blocking reads
- we use the various Buffer classes for reading,writing and
persisting some of our data -
Simple SQL Query is not using Bitmap index
Hello to All,
We are having Oracle9i Database and using it for the datawarehouse purpose.
I have created the bitmap index on calledinfo column and I am running the following simple query which takes serveral hours to complete:
select * from ssp.ssp_2006_q4 where calledinfo='799992515f'
OR
select calledinfo from ssp.ssp_2006_q4 where calledinfo='799992515f'
I don't know why it is not using the bitmap index: Can anybody help me here?
Thanks in Advance
HashimI know why and everyone that has read Jonathan Lewis' book on the CBO knows why.
Why? Because the CBO thinks the cost of using your index will be higher than the cost of ignoring it.
To see what Oracle is thinking run an explain plan using DBMS_XPLAN for create the output and then rerun it with a hint forcing index usage.
It is a mistake to believe that an index will always make things better. Issues of cardinality, clustering factor, etc. are very important.
Post the explain plans if you have any questions about what they show:
http://www.psoug.org/reference/explain_plan.html -
Using Bitmap Index over db link.
I've a problem with the following query:
select count(*)
from TABLE_A@db_link TABLE_A, TABLE_B
where TABLE_A.ACCEPTTIME = TABLE_B.TIME_B
The above query is doing a full table scan (even after forcing index hints) on TABLE_A which has about 300M records.
TABLE_A is a local table while TABLE_B is remotely accesed using db_link.
There is a bitmap index created on the ACCEPT_TIME field of TABLE_A which is not used by the query. However when I fire this query:
Am I missing something here? How can I make the optimizer use the bitmap index on TABLE_A using remote db_link?
Here is the explain plan for the above query:
Operation Object Name Rows Bytes Cost Object Node In/Out PStart PStop
SELECT STATEMENT
Optimizer Mode=ALL_ROWS 1 2
SORT AGGREGATE 1 17
NESTED LOOPS 1 17 2
REMOTE .COPY_STM 1 9 2
STAG_PLMSPDB1.SMART.COM.PH SERIAL
INDEX RANGE SCAN SYSTEM.DIM_TIME_INDX1 1 8 0
Regards,
RajHere is a simple case to explain the problem more clearly:
1. dept: database1 (small table dimension with 4 rows)
2. emp: database2 (large table fact with 50K rows)
3. Table emp has bitmap index on column "deptno"
4. Both tables are analyzed with defualt values using DBMS_STATS.GATHER_TABLE AND INDEX STATS
5. DB Link db2 is created from database1 to database2
Observations:
a) On Database2 when the following query is issued:
select count(*) from emp@DATABASE1 emp, dept where emp.deptno = dept.deptno
It does not use the bitmap index.
b) On Database1 when the following query is issued:
select count(*) from emp emp, dept@DATABASE2 where emp.deptno = dept.deptno
It does use the bitmap index since it is available optimizer has this information locally.
My question is how can I make use of the statistics effectively, so that the optimizer knows it has to use the bitmap index present in the remote db.
Regards,
Raj
Maybe you are looking for
-
I am using windows and iTunes. I have been downloading my cds to my iTunes, but some of the artwork isn't displaying. After downloading the music, I click on "Get Album Artwork". Sometimes it works, other times not. Not a big deal. When it doesn't
-
My iphone 4s keeps on rejecting my MacBook Air
I recently bought a MacBook Air (Late 2014). And I have been having trouble with connecting my iDevice with 30 pin connector port to my MacBook. My USB ports work fine and so does the cable. My thunderbolt cable even worked with my MacBook Air. I tal
-
has anyone else seen this win pc is totally up to date but I am at IE9 as IE 10 is flakey
-
Re: Roku and Vizio TV won't stream netflix or other video
Suddenly FiOS won't let me use ROKU.
-
ITunes Visualizer on External Display Blacks Out Main Display
Is it possible to have the iTunes Visualizer full screen on an external display while keeping the main display active? In other words, I'd like to have my 2nd monitor display the iTunes Visualizer in full screen while I do work on my main screen. Eve