Can Dream works connect server url network international borderline mexico while im out of the US.

Need Help with this ?

Are you asking if you can connect to the Creative Cloud from Mexico?
As long as you have an internet connection, I don't see why not.
Nancy O.

Similar Messages

  • Can no longer connect to my network and 'forget network' option has disappeared??

    Can no longer connect to my network and "forget network" option has disappeared???  (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

    Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

    Hey ronniefai,
    Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
    Viewing the Print Summary
    You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
    Note: Print Center is available only while printing is in progress.
    via AirPrint Basics
    http://support.apple.com/kb/HT4356
    If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
    Thanks,
    Matt M.

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

    I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

    You won't see the frame edges if you are in Preview mode, so you should use Normal mode if you want to see them. You can turn off the Document Grid in the View menu (View>Guides & Grids>Hide Document Grid).

  • How can I turn off the cell service on my phone while traveling out of the country?

    How can I turn off the cell service on my phone while traveling out of the country?

    Airplane Mode

  • IBook can no longer connect to wireless network

    I have a wireless network set up in my home using a Linksys wireless router. While it has worked fine in the past, I can no longer connect to it with my G4 iBook running 10.3.9. It shows up in my network connections with a strong signal but when I open a browser it can't connect to the internet. When I try to open 'Internet Connect' to explore the issue I get the spinning beach ball and have to Force Quit. When I open the network status window, I get a message for Airport that says "Airport is connected to the network 'name of my network'. Airport does not have an IP address and cannot connect to the Internet".
    I have an iMac G5 connected to the router through ethernet cable and it works fine. I have an iMac G4 connected wirelessly to the same wireless router and it works fine. I have a Dell laptop that can also connect wirelessly to the wireless router with no problem.
    It appears something is corrupt with the Internet Connect utility?
    Any help or suggestions are greatly appreciated.
    Thanks.
    Doug

    What type of IP address are you getting? If it starts with 169, it indicates that your iBook can not connect to the DHCP server provided by the router.
    Have you enabled the MAC address filtering on the router? If so, remember that you must add the AirPort MAC address for your iBook.
    If you have a correct IP address, perhaps it is a DNS issue. See KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

  • Cannot locate Adobe Connect Server URL info

    I recently purchased Adobe Captivate 8.0 and I have seen how Responsive Design works. Now, I am trying to publish and display the content to display on a mobile device using Adobe Connect.
    My mobile phone does display regular websites, but it does not display any of my responsive design projects.
    From Captivate
    Click Publish
    Select Publish to Adobe Connect
    In the Name box of the Publish To Adobe Captivate dialog box, I enter a valid name for the project
    (The URL box is blank.) Click the Orange folder icon
    In the Adobe Connect Server dialog box, I click Add
    In the Add New Server dialog box ...
    I can enter a name in the Name box, but ...
    I don't know what to put for the URL box
    It is in the URL box that I am stuck. I don't know what to type or where to get/find the information.
    Please advise.
    Thank you.

    Hi K Taube,
    You can try using https://arcps.adobeconnect.com in URL field.
    If you have Adobe Edge Inspect, you can preview the Responsive project output in Mobile.
    For more information on Help, see Adobe Captivate Help | Adobe Connect 
    Unfortunately, as of now, Mobile view is not supported in Adobe Connect for Responsive projects - please check this link for known issues Top issues | Adobe Captivate 8
    - Jacob.

  • Apple TV 1st Gen can no longer connect to wireless networks

    My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home.  I rean the diagnostics at the reset screen and the Apple TV says it is performing normally.  In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago.  The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty.  The issue is limited to the Apple TV.  I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network"  the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
    This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
    Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
    Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks.  I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
    If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

    Follow-up:  Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
    Next, disconnected the ethernet cable.  ATV1 froze and was restarted using the Menu + ( - ) combo on the remote.  Re-ran diagnostics yeilds: Apple TV is working fine.
    Restarted, then went to configure the Wirelss settings.   Apple TV once again does not show either of the two wireless networks.  Selecting "Other..." and entering the SSID yields the same immediate response:
    "There was a problem connecting to the network. Check your settings and try again. (-4)"
    No change on the wireless front :-(   Bummer.
    Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
    Thanks for your help. -- Paul

  • Can I be connected to two networks at the same time?

    Hi there
    I have an imac desktop with 10.5.8 running. I have a wireless network with my timecapsule and a printer connected to it. We have two mac computers in the house
    that print wirelessly via this network. I also have the internet coming in via a wireless modem/wifi which both computers use to go online. The trouble is everytime I want to print from either computer I have to change back and forth from the internet/network to the timecapsule/printer network. This is really fumbly and I wind up having to restart all the time because the printer gets locked up. It's just a big hassle. Is there any way I can be on both of these networks at the same time or is there some other way I can configure this?
    Thanks!

    Is there any way I can be on both of these networks at the same time or is there some other way I can configure this?
    Yes, you can reconfigure the Time Capsule (TC) to "Join a wireless network." In this case the wireless network would be the one created by the other wireless Internet router. In this configuration, the TC can still share its internal (and external) hard drive and a printer attached to the USB port. However, note that this would disable the TC as a router and an Ethernet switch so basically it will perform as a wireless client.

  • Upgraded imac to lion now can't keep connection to wireless network, iPhone and iPad are fine?????

    Have upgraded my imac to lion and now it can't hold onto my wireless network connection, also having intermittant problems with mail incoming, and not able to send mail out. Wireless network, and mail working fine with my ipad and iphone.  Any ideas out there??

    I actually had that problem when I was downloading Lion it would connect but then if I tried to go on safari it said no internet connection and an exclamation point would be in the wifi bar. If you click on you wifi bar click on the option that says no error no internet or something like that. I deleted my network and then reestablished it as like it was the first time has been fine since even after the upgrade. I was in panic mode when it happend to because all my other stuff worked and i just got my new imac last week

  • Can no longer connect to my network - AirPort Extreme

    Hi everyone.
    I have a small network in my home office and as of lately cannot connect on the wireless side for some reason.
    My setup:
    I have a linksys wrt54g router connected to my modem.
    I have an Intel MacMini connected to the router via ethernet. I also my G5 connected to the modem via ethernet. Then I have just my MB Pro wit it's APExtreme card to connect anywhere in the house via the wireless portion of the network.
    Now, I have always been able to connect to my network. I have simple wep protection and can connect to coffee shop hot spots outside my home (so I know the problem is not in my MB Pro or in the card). It has got to be in the router setup.
    Any ideas?
    Thanks in advance for your help.

    When you restart a wireless network and things seem OK for a time, but the speed slows down after a time and connections become difficult....this is almost always a clear indication that the network is picking up some sort of wireless interference from another source.
    The most common cause of wireless problems are cordless phones. If you have them, try turning them and their base stations off, restart the wireless network and try things out for a few hours if possible. If things improve, then you'll need to move the phones as far away from any wireless devices as possible, or as in my case, switch to cordless phones that do not use the same 2.4 GHz frequency as most wireless networks.
    "Extended" networks are also more susceptibe to picking up interference than those that have a single router. You might try powering down the Express for a period and see if that makes any difference.
    My neighbor...across the street....can literally bring my wireless network to a crawl and stop if he's in his front yard talking on his cordless phone, so it's always possible that a neighbor is causing the problem, or a wireless security system nearby.
    Post back on your progress and findings and we dig a bit deeper if needed. Unfortunately, if you are in a crowded situation like apartments, condos, etc the wireless interference issue can be a real challenge.
    Message was edited by: Bob Timmons

  • Why can't iPod connect to wifi network when iPad and Macbook can?

    Why can't my iPod connect to wifi network when iPad and Macbook both can? Connected in the past, but not for the past week.

    - Reset the iPOd. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off andthen back on the router
    - Power off and then back on the router.
    - Reset network settings>Settings>General>Reset>Reset Network Settings
    iOS: Troubleshooting Wi-Fi networks and connections

  • TS1398 I can no longer connect to my home wireless on my ipad2, have done all the suggested fixes, still cannot connect.  Daughter cannot connect her iPod, but husbands laptop is connected to wireless.

    All of a sudden my ipad will not connect to our home wireless.  I have reset the wireless settings, turned my ipad off and back on, turned off wireless and back on, basically have done all of the fixes suggested and still I cannot connect.  My daughter cannot connect her iPod either, but my husbands laptop can and is connected to our wireless.  The wireless is working and until two days ago I had no problems connecting.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have Trouble Connecting To WiFi Network with My Mac, while the rest of the technology connects to it perfectly...

    I have used my Mac for almost a year now, and I've always had no problem connecting to WiFi, but today - suddenly I've lost the connection and now I can't see the WiFi Network in the list... I have 2 WiFi's connected together at home - TP Link and Netgear...
    The internet still works on a PC which is connected through Ethernet, and the Mac itself works when it's connected through Ethernet... The first thought I had was the problem with WiFi settings, but my IPhone can connect to internet and work perfectly... So next thought was that it was a problem with my mac, but my dad has the same problem with his Mac (he also used this WiFi Network fine before)... So any thoughts?

    Hi there,
    You may want to take a look at the troubleshootings steps found in the article below.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W.

Maybe you are looking for

  • TS3048 my magic mouse does not want to right click anymore?

    My magic mouse does not seem to right click anymore, any suggestions?  For example, I used to right click on my icon of my memory card from the camera that I have inserted into the side of the IMac and I could choose "eject" now it doesn't want to ri

  • Why do iOS 5-only apps appear in app-update queue?

    I have two apps sitting in my update queue that will only run on iOS 5 (I have iOS 4). Is there any way to clear your queue, or decline an update? I do not want to upgrade to iOS 5 (or Lion). Also, can anyone explain to me why the App Store upgrade p

  • BlackBerry World Don't Work

    Hello, If Mobile Network is closed and wifi is open; BlackBerry World is working.Some Turkey users have this error.  How can I fix it? Screen shot is this link. https://pbs.twimg.com/media/BgSzqHPIgAAZ3JW.png F.Okan BBTURK BlackBerry Turkiye

  • How to obtain Information in an open Keynote presentation

    What I mean is that in other iLife applications, such as Pages, one can call on Information on the document by opening the Inspector/Document/Information. I find this useful when I need to locate them in the Finder. Where can I find the same service

  • Conversion of LaTeX formatting?

    I have some text in a database that I write out in InDesign Tagged Text format for placing in an InDesign CS3 document. Normally, this text is just plain text. However, now I noticed some LaTeX formatting codes (LaTeX is a document formatting languag