Can DRIVER itab & RESULTANT itab be same with FOR ALL ENTRIES ??
Hi All,
Can DRIVER itab & RESULTANT itab be same with FOR ALL ENTRIES ??
Whole idea is to update one field of ITAB from another table ....
Regards
Jaman
Edited by: ABAP Techie on Sep 11, 2008 8:25 AM
I found this in the F1-Help for "FOR ALL ENTRIES":
>"In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO."
Check however if you can use a proper JOIN select. This will fill your internal table in one operation and is usually faster than a FOR ALL ENTRIES, contrary to some circulating comments here.
Thomas
Similar Messages
-
Alternative for / Problems with: "For all entries in data_package"
Hi Guys
I doing some ABAP in a Start Rotine in BW and would like to do the following:
select * from /BI0/PMATERIAL into table 0mat
for all entries in DATA_PACKAGE
where material = DATA_PACKAGE-/bic/zmaterial.
But I get the following error:
E:When using the addition "FOR ALL ENTRIES IN itab", the fields "MATERIAL" and "DATA_PACKAGE-/BIC/ZMATERIAL" must have the same type and length. and length.
ZMATERIAL:
- Length: 28
- Type: CHAR - Character String
ZMATERIAL:
- Length: 18
- Type: CHAR - Character String
According to the error message "For all entries" cannot be used in this case since the lengths are not identical, but is there an alternative way to do what I would like to do?
Thanks in advance, kind regards,
TorbenHi
one thing you can try like this define one variable in other itab of same type
then loop at the first table and assign it to new field and modify the itab
then use this field with for all entries
Regards
Shiva -
Can we use inner joins with for all entries?
Hi,
Can we use innerjoin on two tables MARA and MAKT against the materials in
the internal table.
If so ,please let me know whether there is performance issue.Because if there is
bad performance issue or something else like thise means,my project manager
wont allow to include.
So can one let me know about this.
Thanks,
BalajiHi Arunkumar,
I think you are not clear.My question is can I use innerjoin with
for all entries.For example below is my code.
SELECT A~MATNR
B~MAKTX
A~MTART
A~MATKL
FROM MARA AS A INNER JOIN MAKT AS B
ON AMATNR = BMATNR
INTO TABLE IT_MARA_MAKT
FOR ALL ENTRIES IN IT_MATNR
WHERE A~MATNR = IT_MATNR-MATNR
AND A~EXTWG = P_EXTWG
AND A~SPART = P_SPART.
Can we use like this for all entries along with innerjoins.
Thanks,
Balaji -
How does select stmt with for all entries uses Indexes
Hello all,
I goes through a number of documents but still confused how does select for all entries uses indexes if fields are not in sequences. i got pretty much the same results if i take like two cases on Hr tables HRP1000 and HRP1001(with for all entries based upon hrp1000). Here is the sequence of index fields on hrp1001 (MANDT, OTYPE, OBJID, PLVAR, RSIGN, RELAT, ISTAT, PRIOX, BEGDA, ENDDA, VARYF, SEQNR). in second case objid field is in sequence as in defined Index but i dont see significant increase in field even though the number of records are around 30000. My question is does it make a differrence to use field sequence (same as in table indexes) in comparison to redundant field sequence (not same as defined in table indexes), secondly how we can ge tto know if table index is used in Select for entries query i tried Explain in ST05 but its not clear if it uses any index at all in hrp1001 read.
here is the sample code i use to get test results.
test case 1
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
t2 TYPE timestampl,
t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
WHERE mandt EQ sy-mandt AND
plvar EQ '01' AND
otype EQ 'S'AND
istat EQ '1' AND
begda <= sy-datum AND
endda >= sy-datum AND
langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
FOR ALL ENTRIES IN it_hrp1000
WHERE mandt EQ sy-mandt AND
otype EQ 'S' AND
* objid EQ it_hrp1000-objid and
plvar EQ '01' AND
rsign EQ 'B' AND
relat EQ '007' AND
istat EQ '1' AND
begda LT sy-datum AND
endda GT sy-datum and
sclas EQ 'C' and
objid EQ it_hrp1000-objid.
* %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.
test case 2
REPORT zdemo_perf_select.
DATA: it_hrp1000 TYPE STANDARD TABLE OF hrp1000 WITH HEADER LINE.
DATA: it_hrp1001 TYPE STANDARD TABLE OF hrp1001 WITH HEADER LINE.
DATA: it_hrp1007 TYPE STANDARD TABLE OF hrp1007 WITH HEADER LINE.
DATA: it_pa0000 TYPE STANDARD TABLE OF pa0000 WITH HEADER LINE.
DATA: it_pa0001 TYPE STANDARD TABLE OF pa0001 WITH HEADER LINE.
DATA: it_pa0002 TYPE STANDARD TABLE OF pa0002 WITH HEADER LINE.
DATA: it_pa0105_10 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: it_pa0105_20 TYPE STANDARD TABLE OF pa0105 WITH HEADER LINE.
DATA: t1 TYPE timestampl,
t2 TYPE timestampl,
t3 TYPE timestampl
SELECT * FROM hrp1000 CLIENT SPECIFIED INTO TABLE it_hrp1000 bypassing buffer
WHERE mandt EQ sy-mandt AND
plvar EQ '01' AND
otype EQ 'S'AND
istat EQ '1' AND
begda <= sy-datum AND
endda >= sy-datum AND
langu EQ 'EN'.
GET TIME STAMP FIELD t1.
SELECT * FROM hrp1001 CLIENT SPECIFIED INTO TABLE it_hrp1001 bypassing buffer
FOR ALL ENTRIES IN it_hrp1000
WHERE mandt EQ sy-mandt AND
otype EQ 'S' AND
objid EQ it_hrp1000-objid and
plvar EQ '01' AND
rsign EQ 'B' AND
relat EQ '007' AND
istat EQ '1' AND
begda LT sy-datum AND
endda GT sy-datum and
sclas EQ 'C'." and
* objid EQ it_hrp1000-objid.
* %_hints mssqlnt 'INDEX(HRP1001~0)'.
*delete it_hrp1001 where sclas ne 'C'.
GET TIME STAMP FIELD t2.
t3 = t1 - t2.
WRITE: 'Time taken - ', t3.Mani wrote:
Thank you for your answer, its very helpful but i am still nor sure how does parameter rsdb/max_blocking_factor affect records size.
Hi,
The blocking affects the size of the statement and the memory structures for returning the result.
So if your itab has 500 rows and your blocking is 5, the very same statement will be executed 100 times.
Nothing good or bad about this so far.
Assume, your average result for an inlist 5 statement is 25 records with an average size of 109 bytes.
You average result size will be 2725 byte plus overhead which will nearly perfectly fit into two 1500 byte ethernet frames.
Nothing to do in this case.
Assume your average result for an inlist 5 statement is 7 records with an average size of 67 bytes.
You average result size will be ~ 470 byte plus overhead which will only fill 1/3 of a 1500 byte ethernet frame.
In this case, setting the blocking to 12 ... 15 will give you 66% network transfer performance gain,
and reduces the number of calls to the DB by 50%, giving additional benefit.
Now this is an extreme example. The longer the average row length is, the lower will be the average loss in the network.
You have the same effects in memory structures, but on that layer you are fighting single micro seconds instead of
hundreds of these, so in real life it is rarely measurable.
Depending on table-statistics, oracle might decide for short inlists to use a concatanation instead of an inlist.
This is supposed to be more costy, but I never had a case where I could proove a big difference.
Values from 5 to 15 for blocking seem to be ok for me. If you have special statements in customer coding,
it #might# be benefitial to do the mentioned calculations and do some network tracing to see if you can squeeze your
network efficiency by tuning the blocking.
If you have jumbo frames enabled, it might be worth to be analyzed as well.
If you are only on a DB-CI system that is loopback connected to the DB, I doubt there might be a big outcome.
Hope this helps
Volker -
Coupling INNER JOIN with FOR ALL ENTRIES statement
Hi All,
I am coupling INNER JOIN with FOR ALL ENTRIES statement .....
Would you please highlight its implications ?? Is it a best practise ?
Is it advicable to use MULTIPLE INNER JOINs with a FOR ALL ENTRIES ???
SORT itab BY matnr.
IF NOT itab[] IS INITIAL.
SELECT epmatnr epebeln ep~ebelp
epwerks epmenge ep~netpr
ekps_psp_pnr ebbelnr eb~menge
INTO TABLE iekpo
FROM ekpo AS ep
INNER JOIN ekkn AS ek
ON ekebeln = epebeln
AND ekebelp = epebelp
INNER JOIN ekbe AS eb
ON ebebeln = epebeln
AND ebebelp = epebelp
AND eb~bwart = '101'
FOR ALL ENTRIES IN itab
WHERE ep~matnr = itab-matnr.
IF sy-subrc EQ 0.
SORT iekpo BY matnr werks.
LOOP AT itab ASSIGNING <itab>.
READ TABLE iekpo WITH KEY matnr = <itab>-matnr
werks = <itab>-werks
BINARY SEARCH.
IF sy-subrc EQ 0.
MOVE iekpo-matnr TO itab1-matnr.
MOVE iekpo-ebeln TO itab1-ebeln.
MOVE iekpo-ebelp TO itab1-ebelp.
MOVE iekpo-netpr TO itab1-poprice.
MOVE iekpo-werks TO itab1-werks.
MOVE iekpo-menge TO itab1-menge1.
MOVE iekpo-menge1 TO itab1-menge2.
MOVE iekpo-belnr TO itab1-belnr.
MOVE iekpo-ps_psp_pnr TO itab1-pspel.
MOVE <itab>-pspel TO itab1-tpspel.
MOVE <itab>-sobkz TO itab1-sobkz.
MOVE <itab>-fo_qty TO itab1-fo_qty.
MOVE <itab>-schgt TO itab1-schgt.
MOVE <itab>-postp TO itab1-postp.
MOVE <itab>-beskz TO itab1-beskz.
pend_qty = iekpo-menge1 - iekpo-menge2.
MOVE pend_qty TO itab1-pending.
APPEND itab1.
pend_qty = 0.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
Regards
Jaman
Edited by: ABAP Techie on Sep 15, 2008 12:39 PM
Edited by: ABAP Techie on Sep 15, 2008 12:41 PMbest practise ... don't know ... it is allowed and o.k.
If possible you should of coourse to have no FOR ALL ENTRIES at all !
Joins, there is no general rule, check indexes etc.
The first SORT, I don't that it help for anything, use it together with the delete adjacent duplicates if you expect duplicates in the driver table.
o.k., it can help, if there is a loop afterwards and an append inside, because the new table itab1 is then sorted.
Siegfried -
Replacing innerjoins with for all entries
can any one help me in replacing the below
innerjoins with for all entries
SELECT avbeln aposnr amatnr apstyv a~werks
FROM vbap AS a INNER JOIN marc AS b
ON amatnr = bmatnr AND
awerks = bwerks
INTO TABLE vbap_itab
WHERE a~vbeln = i_vbeln-vbeln
AND a~uepos = 0
AND b~umrsl = 'VBOM'.
and please tell me which table we need to select first in vbap and marc and why
Edited by: ram reddy on Apr 30, 2008 9:27 AMhi check this one
data:
begin of vbap_itab,
vbeln type vbap_-vbeln,
posnr type vbap_posnr,
matnr type vbap_matnr,
pstyv type vbap_pstvy,
werks type vbap_werks,
end of itab,
begin of marc_itab,
matnr type marc-matnr,
werks type marc-werks,
end of marc_itab.
select matnr
werks
from marc
into table marc-itab
where umrsl = 'VBOM'.
if marc_itab is initial.
exit.
else.
select vbeln
posnr
matnr
pstvy
werks
from vbap
into table vbap_itab
for all entries in marc_itab
where matnr = marc_itab-matnr
and werks = marc_itab-werks
and vbeln = i_vbeln-vbeln
and uepos = 0.
endif.
Edited by: ravi kumar on Apr 30, 2008 9:51 AM -
Replacing a inner join with for all entries
Hi Team,
In a already developed program I am replacing a inner join with select query follow up with for-all-entris and passing the data to final internal table but in both the case the result should be same then only my replacement will be correct. But my no records in both cases differs. This happening because when i am selecting data from first data base table is 32 lines. then I am doing fo-all-entries moving all the duplicate entries then the no records are four. but in final internal table i am looping the first internal table. So in final internal table the no of records are 32. But in inner join query the records are 16.So please let me know how resolve this issue?
Thanks and REgards
DeepaHi Thomas,
Thanks for ur suggestion.
The solved that in below.
In select query I did not change anything The way I had written the code was correct.
I think many of us know how to write that how to make the performance better in that way.
I made the change when I transfered the to final internal table.
The original Inner join code:
select a~field1 a~field2 a~field3 b~field2 b~field3 b~field4
from dbtab1 as a inner join dbtab2 as b
on a~field1 = b~field1 into it_final where
a~field1 in s_field1. [Field1 in both the table are key field]
Before code:
Sort itab1 by key-fields.
sort itab2 by keyfields.
loop at itab1 into wa1.
move: wa1-field1 to wa_final-field1,
wa1-field2 to wa_final-field2,
wa1-field3 to wa_final-field3.
read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
if sy-subrc = 0.
move : wa2-field2 to wa_final-field4,
wa2-field3 to wa_final-field5,
wa2-field4 to wa_final-field6.
append wa_final to it_final.
endif.
Clear : wa1, wa2, wa_final.
endloop.
In this case if the one key fieild value is not present there in second internal table but its there in first internal table still it will read that row with 2nd internal values having zeroes. Normally what does not happen in inner join case if the key field value will same in both the case ,then that will fetch only those rows.
Changed Code
loop at itab1 into wa1.
read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
if sy-subrc = 0.
move: wa1-field1 to wa_final-field1,
wa1-field2 to wa_final-field2,
wa1-field3 to wa_final-field3.
move : wa2-field2 to wa_final-field4,
wa2-field3 to wa_final-field5,
wa2-field4 to wa_final-field6.
append wa_final to it_final.
endif.
Clear : wa1, wa2, wa_final.
endloop.
In this case the values will read to final internal table if both key field matches.
With Regards
Deepa -
Hi,
SELECT max( VBELN ) VGBEL VGPOS POSNR FKIMG VRKME NTGEW MATNR ARKTX WERKS MVGR3
FROM VBRP
INTO TABLE T_INVIT
FOR ALL ENTRIES IN T_INVHD
WHERE VBELN = T_INVHD-VBELN
AND SPART = T_INVHD-SPART
AND werks IN swerks
AND mvgr3 IN smvgr3
group by VBELN VGBEL VGPOS POSNR FKIMG VRKME NTGEW MATNR ARKTX WERKS MVGR3.
i want to (max) invoice no against a delivery i.e vgbel but in this query i am getting error that with for all entries only count * is allowed.
regards
FoziaHi Do this way..
IF NOT T_INVHD[] is initial.
LOOP AT T_INVHD
SELECT max( VBELN ) VGBEL VGPOS POSNR FKIMG VRKME NTGEW MATNR ARKTX WERKS MVGR3
FROM VBRP
INTO T_INVIT
WHERE VBELN = T_INVHD-VBELN
AND SPART = T_INVHD-SPART
AND werks IN swerks
AND mvgr3 IN smvgr3
group by VGBEL VGPOS POSNR FKIMG VRKME NTGEW MATNR ARKTX WERKS MVGR3.
IF SY-SUBRC = 0.
APPEND T_INVIT.
CLEAR T_INVIT
ENDIF.
endselect.
endloop.
endif.
EVEN NO EFFECT ON PERFORMANCE
RGDS
RAJESH -
INNER JOIN with FOR ALL ENTRIES IN Performance ?
I am using following the following <b>Select using Inner join with For All Entries in.</b>
SELECT kebeln kebelp kvbeln kvbelp
FROM ekkn AS k INNER JOIN ekbe AS b ON kebeln = bebeln
AND kebelp = bebelp
INTO TABLE gi_purchase
FOR ALL ENTRIES
IN gi_sales
WHERE k~mandt EQ sy-mandt
AND k~vbeln EQ gi_sales-vbeln
AND k~vbelp EQ gi_sales-posnr
AND b~budat EQ p_date.
If i am not doing inner join then I will have to do 2 select with for all entries in on ekkn and ekbe tables and then compare them.
<b>I want to know which one has better performance
Inner join with for all entries in
or
2 Selects with for all entries in</b>the join is almost aways faster:
<a href="/people/rob.burbank/blog/2007/03/19/joins-vs-for-all-entries--which-performs-better">JOINS vs. FOR ALL ENTRIES - Which Performs Better?</a>
<a href="http://blogs.ittoolbox.com/sap/db2/archives/for-all-entries-vs-db2-join-8912">FOR ALL ENTRIES vs DB2 JOIN</a>
Rob -
Inner Join with For All Entries - Performance ?
I am using following the following <b>Select using Inner join with For All Entries in.</b>
SELECT kebeln kebelp kvbeln kvbelp
FROM ekkn AS k INNER JOIN ekbe AS b ON kebeln = bebeln
AND kebelp = bebelp
INTO TABLE gi_purchase
FOR ALL ENTRIES
IN gi_sales
WHERE k~mandt EQ sy-mandt
AND k~vbeln EQ gi_sales-vbeln
AND k~vbelp EQ gi_sales-posnr
AND b~budat EQ p_date.
If i am not doing inner join then I will have to do 2 select with for all entries in on ekkn and ekbe tables and then compare them.
<b>I want to know which one has better performance
Inner join with for all entries in
or
2 Selects with for all entries in</b><b></b>An Inner Join with for all entries should be done if you add this....
IF NOT gi_sales[] IS INITIAL.
SELECT k~ebeln k~ebelp k~vbeln k~vbelp
FROM ekkn AS k INNER JOIN ekbe AS b ON k~ebeln = b~ebeln
AND k~ebelp = b~ebelp
INTO TABLE gi_purchase
FOR ALL ENTRIES
IN gi_sales
WHERE k~mandt EQ sy-mandt
AND k~vbeln EQ gi_sales-vbeln
AND k~vbelp EQ gi_sales-posnr
AND b~budat EQ p_date.
ENDIF.
Also, while you use an index or the complete key for the SELECT, your not going to suffer from lack of performance -;)
Greetings,
Blag. -
Using aggregate function along with for all entries: sugest alternative
My requirement:
For each record in i_vbap for which 'charg' is initial, need to determine batch using the following logic:
For the material (MATNR) in i_vbap, select the batch (CHARG) which has the largest (MAX) unrestricted inventory quantity (CLABS) from MCHB table.
How do I implement this logic without using select statement inside a loop as I cannot use MAX ( CLABS ) function along with FOR ALL ENTRIES in a SELECT?
Suggest an alternative.For each record in i_vbap for which 'charg' is initial ,fetch all the existing 'clabs' value.
[ Remember to include all the key fields in selct ]
Sort the new table .
Put a loop,use at end of 'charg' and append to another table. U get ur solution
I think this should be the most economic way to do so. -
Need to SUM on a field with FOR ALL ENTRIES
Hi All,
I need to use something like this appearing below ....but SUM is not allowed with FOR ALL ENTRIES ......Whats the efficient ALTERNATIVE ???
SELECT sum( menge ) INTO TABLE imseg
FROM mseg
FOR ALL ENTRIES IN iresb
WHERE matnr = iresb-matnr
AND bwart = '281'
AND aufpl = iresb-aufpl
AND aplzl = iresb-aplzl.
Any help will be rewarded & appreciated ...
Regards
JamanHi Karthik,
Thanx a ton....
How about the below approach .....its allowed & working fine ....also simplifying my work..
SELECT matnr menge rsnum rspos
INTO (ws-matnr, ws-menge, ws-rsnum, ws-rspos)
FROM mseg
FOR ALL ENTRIES IN iresb
WHERE matnr = iresb-matnr
AND bwart = mvtyp1
AND rsnum = iresb-rsnum
AND rspos = iresb-rspos.
imseg2-matnr = ws-matnr.
imseg2-menge = ws-menge.
imseg2-rsnum = ws-rsnum.
imseg2-rspos = ws-rspos.
COLLECT imseg2.
ENDSELECT. -
Hi all,
When i was trying to use for all entries, i am not able to pull records inside my internal table. Though both of the tables have the common key fields between them(and ofcourse have entries in that). Now what i have analyzed was, the first table is having 7 primary keys and the one i am using for 'for all entries' comes 6th. Does this gives any impact in pulling records inside my internal table?.Else please give me a possible solution for this. The alternate statement(a normal select query with * ) that i had used for this reserved my dialog processor for a while. Which resulted in 'time exceeded' short dump.Hi,
The WHERE clause of the SELECT statement has a special variant that allows you to derive conditions from the lines and columns of an internal table:
SELECT ... FOR ALL ENTRIES IN <itab> WHERE <cond> ...
<cond> may be formulated as described above. If you specify a field of the internal table <itab> as an operand in a condition, you address all lines of the internal table. The comparison is then performed for each line of the internal table. For each line, the system selects the lines from the database table that satisfy the condition. The result set of the SELECT statement is the union of the individual selections for each line of the internal table. Duplicate lines are automatically eliminated from the result set. If <itab> is empty, the addition FOR ALL ENTRIES is disregarded, and all entries are read.
The internal table <itab> must have a structured line type, and each field that occurs in the condition <cond> must be compatible with the column of the database with which it is compared. Do not use the operators LIKE, BETWEEN, and IN in comparisons using internal table fields. You may not use the ORDER BY clause in the same SELECT statement.
You can use the option FOR ALL ENTRIES to replace nested select loops by operations on internal tables. This can significantly improve the performance for large sets of selected data.
Hope this is useful
Reema -
Inner join with for-all entries
Why is the below inner join-for all entries does not result in expected output ?
REPORT ZTST3 .
tables : ztst1,ztst2 .
* table ztst1 has 4 fields : mandt,ebeln,ebelp,etenr,char4. ; ztst2 has
* 3 fields : mandt,ebeln,ebelp,matnr
*Entries in ztst1
* EBELN EBELP ETERN CHAR4
* 5000000000 00010 0001 abc
* 5000000000 00010 0002 cbd
* 5000000000 00010 0003 efg
*Entries in ztst2
* EBELN EBELP matnr
* 5000000000 00010 matabc
*expected itab after inner join
* EBELN EBELP CHAR4 MAtnr
* 5000000000 00010 abc matabc
* 5000000000 00010 cbd matabc
* 5000000000 00010 efg matabc
data : begin of itab1 occurs 0,
ebeln type ebeln,
ebelp type ebelp,
end of itab1.
data : begin of itab occurs 0,
ebeln type ebeln,
ebelp type ebelp,
char4 type char4,
matnr type matnr,
end of itab.
start-of-selection.
itab1-ebeln = '5000000000'.
itab1-ebelp = '00010'.
append itab1.
select ztst1~ebeln
ztst1~ebelp
ztst1~char4
ztst2~matnr into corresponding fields of table itab
from ztst1 inner join ztst2
on ztst1~ebeln = ztst2~ebeln and
ztst1~ebeln = ztst2~ebelp
for all entries in itab1
where
ztst1~ebeln eq itab1-ebeln and
ztst1~ebelp eq itab1-ebelp .
* why does it return no entries;
break-point.For example in the bellow case
*Entries in ztst1
EBELN EBELP ETERN CHAR4
5000000000 00010 0001 abc
5000000000 00010 0002 cbd
5000000000 00010 0003 efg
5000000002 00020 0003 efg
5000000002 00020 0003 efg
*Entries in ztst2
EBELN EBELP matnr
5000000000 00010 matabc
5000000002 00020 abc
may it will return you 2 records yes, than I think you have under stand the working of u201Cfor all entriesu201D ?
And the following case I think it will work fine.
*Entries in ztst1
key EBELN EBELP ETERN CHAR4
1 5000000000 00010 0001 abc
2 5000000000 00010 0002 cbd
3 5000000000 00010 0003 efg
4 5000000002 00020 0003 efg
5 5000000002 00020 0003 efg
*Entries in ztst2
EBELN EBELP matnr
5000000000 00010 matabc
5000000002 00020 abc
select ztst1~key
ztst1~ebeln
ztst1~ebelp
ztst1~char4
ztst2~matnr into corresponding fields of table itab
from ztst1 inner join ztst2
on ztst1~ebeln = ztst2~ebeln and
ztst1~ebelp = ztst2~ebelp
for all entries in itab1
where
ztst1~ebeln eq itab1-ebeln and
ztst1~ebelp eq itab1-ebelp .
Sorry, I donu2019t have system with me right now and I am sending you with out testing but I am sure that it is working the same way.
Please Reply if any problem
Kind Regards,
Faisal -
Performance Problems with "For all Entries" and a big internal table
We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
WHERE
status = 'IAI200' AND
logdat IN gs_dat AND
ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
> FOR ALL ENTRIES IN gt_zmon_help
> WHERE
> status = 'IAI200' AND
> logdat IN gs_dat AND
> ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.
Maybe you are looking for
-
ST03N shows users accessing transactions even when not logged in
Hello all... We are trying to determine how many times a user executed a transaction during a specific period, and are using ST03N to do this. We get the information fine, but it shows non-system users as having accessed transactions on days they ar
-
Hp officejet pro 8600 plus - connected to the wireless but AirPrint not working
i have an hp officejet pro 8600 plus. had it for 6 months or so. intial setup went fine...connected to the wireless network with no problems...airprint worked instantly from all of my apple devices. recently, in the last 3 weeks, airprint has stop
-
How to Upload Excel file to Application Server
Hi Friends, ALSM_EXCEL_TO_INTERNAL_TABLE this F.M is to upload the excel format into internal table , The problem here is after uploading the excel file the format has been changed according to the F.M ... so Im not able to compare the value with my
-
Create change log for Z tables in XD02/XD03
I have added a new tab, to customer master screen. The new screen under that tab has 4 fields, those 4 fields are inserted into Z table. Can you please give me the sequence of steps so that system will show change history with Z fields? I checked tha
-
How do I create a single burst of particles?
I am trying to create a particle effect which does not fade out, but which emits particles for a period of time and then stops emitting. The particles do not fade away but rather they leave the edge of the screen as I have set the life quite high. Th