Can DTrace do this (hardware level data)

I need a way to see the data that is exchanged between a hardware driver and the hardware. Specifically, I'm working on a USB driver and I need to see the raw data that goes out over the USB bus. Is this something that I can accomplish with DTrace?

Woops, long day, correction; I'm working one level above the driver, and I need to see what the driver is putting out on the bus. I do not have access to the driver source code.

Similar Messages

"cannot install this hardware" usb data cable

Then it continues to say because cannot find the neccessary software for installion.
I have nokia 6230i which i just got back from nokia after they fixed the battery problem and slow menus (i presume they just updated the firmware?)
My cable says ma-8630 on it
it always used to work but now i've reinstalled windows and now when trying to using the newest pc suite it just doesn't want to install the cable
so is it more likely when nokia were fixing my phone they've done something so pc suite won't recognise it?!
i'm pretty stumped after not having any problems before but i just can't seem to get any further than installing the cable
any help would be much appreciated... cheers Nick

YOu say you have reinstalled Windows and you have non-Nokia cable in use and your phone has been just updated. Ups, I woulsay it is pretty tricky to try to remotely figure out what can be the root cause.
What is your Windows version ? Do you get the question in phone screen when you connect to allow data storage and you select "no" ? Please descibe in more detail what happens, then it is easier to suggest ideas for fixing the situation.

I have just unregistered hardware that was stolen, how can I unregister this hardware from Itunes?

How can I prevent my purchased items to be shared with these stolen devices?

Music purchased from the iTuens store can be transferred using iTunes. However, music from other sources can only be transferred from your phone using 3rd party software such as PhoneView (mac) or Touch Copy (pc or mac). These articles will show you how to start syncing with your new computer with minimal or no data loss:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
Recovering your iTunes library from your iPod or iOS device

TCode - ME41 - Get Service Level Data

Hi all,
I am working on screen exit for RFQ Creation through T-Code u2013 ME41 and using enhancement - MM06E005. In one scenario I am facing problem, It goes like this:
We are creating RFQ with ref to PR and adopting line items from it. If we are using PR created for materials its working f9 but when we are adopting PR for Services in RFQ, I am not able to get service level data in any of the exiting available exists of Enhancement - MM06E005. I guess this Service level data is stored in table u2013 ESLH (Service Package Header Data), ESLL (Lines of Service Package). As no reference structure or table available in Exits so I am not able to get this data. Is there any way to get this data. Is there any class or object available ?u2026.. Please adviceu2026..
Thanks & Regards,
Rajesh

its done

My wife's iTunes ID will no longer work. Tried to reset password but did not get email, tried to reset by answering personal questions' but will not accept the correct date of birth. Has it been hacked? How can I fix this?

My wife's iTunes used ID will not work. Tried resetting the password, but email was not received. Tried using personal questions method, but would not accept the correct date of birth, so could not go any further. Has her iTunes ID been hacked? How can I fix this?

Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits

Can only boot in Safe Mode -NVDA(Video): Channel exception! is this hardware or software and how much did it cost you to get it fixed out of warranty?

NVDA(Video): Channel exception! exception type = 0x1 = Fifo: Fifo Method Error
NVDA(Video): Channel exception! exception type = 0x6 = Fifo: Parse Error
My iMac freezes and crashes and I get the above message in the kernel log. I have done a few reinstalls from time machine but it comes back.
I get to the point where I want to erase the disk and do a clean install but I get afraid that the kernel will panic during install/ I will lose the registration keys to software/ or that I am just wasting my time.
Has anyone truly fixed this? Is an erase and install going to help?
My first crash happened a week or so after updating to 10.6.8. I was watching videos in full screen mode. When I pressed esc it froze. (Sometimes the audio continues but the iMac is frozen.)
So I stopped use Chrome but it followed me to Safari. I like YouTube Videos and can't watch them in safe mode -no sound.
After installing from a time machine back-up and just re-installing my Mac will boot normally but it doesn't last long and I often can't even boot to CD. It sometimes crashes in the finder.
What's going on?
This computer is old but should have tons of life left- if you've been here how did you get out of this mess?
How much is it going to cost me to get my computer back?
I can't do a hardware test because I don't know where the original disks are but tech tools and the system profiler assure me everything is OK.
Any moral support is welcome.

It could be a failing drive or logicboard (GPU), it is old and has probably served you well, you can take to an Apple store and they will diagnose it for free, and give you your options, but it is old and are you willing to pay much money to have it repaired? You are probably better off replacing it.
There is some software for data ercovery such as Disk Warrior, but it's not cheap.
Or ask about this program
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
You can try shutting down and try a SMC reset
http://support.apple.com/kb/HT3964
and see if it will boot, if it does try to do a back up, but something sounds as though it may be in failure mode.
Good luck

Need idea on how to implement this - repeating monthly data on day level

Hi all, i had run into the following thing, this may soung easy, but i'm searching for the best solution:
i have a dataset per the stores of the customer, the dataset is an asset count on the end of the specific month. I must not sum the data between two/N months.
We they need to do several querries like
sales/assets/day
Sales/itemgroup/asset/day
sales/salesperson/asset/day
etc.
My problem is that i have this data on a month&store level, but i need to provide a solution, so it could be handled as a "global" value on that, so they can query it "almost any ways".
I don't really want to generate day/other level data based on this, so any tricks, how to repeat the data in all lines for that specific month on presentation/Business level?
All ideas are welcome.
Thanks&Regards,
D
Edited by: user8113564 on 2012.09.11. 4:52

Sorry if I took this wrong but are you try to do level based measured
Take the same physical column in the fact and have one aggregated at a month level and the other at a day level.
If yes, make sure you build a date dimension hierarchy and mapped at the correct level to the fact. Then take your measure and correctly define them at the correct level, day, month etc
This should sort it out

Power pivot : Can we include week level data filter in timeline?

Can we include week level data in timeline? the Timeline object takes the date and show always the same 4
levels(Year, Quarter, Month, Date). What if I want to filter on a week
level ?
thanks

If a week selection is an immediate requirement for you, you could introduce a week name column in your calendar table (YYYY WK ww) and create a slicer based on that.
All of the built-in time intelligence in DAX and Tabular is week-agnostic in part due to the myriad rules for handling partial weeks at year-end, and year-beginning and in part due to different week-ending days in use. If this reasoning is followed, then
it may be unlikely that we see a week selection in a timeline.

Hello, I want to restore a backup on my Iphone 4S, but in i-tunes it's not vissable. When I'll look on te pc: (username)\Application Data\Apple Computer\MobileSync\Backup\ it's there! How can I get this backup to my iphone or itunes? Thanks in advance!

Hello, I want to restore a backup from this afternoobut in i-tunes it is not visseble. When I'll look on te pc: (username)\Application Data\Apple Computer\MobileSync\Backup\ it's there! How can I get this backup to my iphone or itunes? Thanks in advance!

Follow the steps in this article to restore from iTunes back up:
http://support.apple.com/kb/HT1766
Since you say you cant see the back up in iTunes you should be able to see it when following the last step where it says for iTunes 10.7 or earlier. Dont worry as this step also works for iTunes 11.

How can I display the Process Level by Phase in a Grid or Data Form?

We are using phased submissions. I can see that changing the display options on a grid will show the current Process Level for the processing unit defined by the POV. But how can we break this down by phase?

Try what is suggested in Page 243 of the User's Guide:
You can display multiple submission phases, view review level status, and perform process management actions for multiple phases in Process Control.
If you select Single period view, you can select one or more submission phases to include in the columns. For each column, you can display one or more of these options: Calculation Status, Journals, Review Level, Pass/Fail, and Validation. If selected, Review Level, Pass/Fail, and Validation are included for each phase. Since Calculation Status and Journals apply to the entire processing unit, they are displayed only once regardless of how many phases are selected. If you select All period view, you can select Calculation Status or Review Level information for the columns. If you select Review Level information, you should select one submission phase
for display. When you select All periods, or Tree for the display, the filter option is unavailable.
Here is the options:
!http://0ue0ag.blu.livefilestore.com/y1pceBZ2nCvU8wYKj38bzK_O3B8eXo5XwfxwTkVeMdPu1fi6lHT_DcYrxlptGHYDm6N4lA0H2YMnWx4qtcOe4ttmM-Em-fheg5P/Phase%20Submission.jpg!
And the Result:
!http://0ue0ag.blu.livefilestore.com/y1pWfMkCFrViEuCRyAHWCphl7y0gZBAK3UY1f2ECi1kme3_xP2FQjyG5f4TC7QHwoHPxBSb0GTKpyU6TXMSp9P5wR5LbJeYl5eu/Phase%20Submission2.jpg!

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

This might help: http://support.apple.com/kb/HT1495.

My new iMac had the old data transferred in-store but now it won't accept the password on the first screen. How can I reset this? I can't get past the first screen as a result.

I cannot get past the initial screen on my new iMac. Data was transferred from my old computer so when I turned it on It automatically had my name in the window and asked for the password, but none of my old passwords seem to be accepted. How can I fix this?? It's a new IMac with osx.

Which password isn't working? The one to access the iPad or the one to get your hotmail?
If hot mail, you go into the settings, mail, contacts and calendars and edit your hot mail account. Of if it won't edit, delete it off the iPad, then re-add it with the new password.

HT204053 How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

You cannot delete the account from the server (partly to prevent the username from becoming available again and some-one else using it to pretend to be you).. Having disengaged your devices from it, go to http://icloud.com and delete any data in there such as contacts and calendars. Then just ignore it.

HT1296 I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. How can I fix this?

I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar data transfer is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. The birthday entries in my Outlook contacts have correct dates.How can I fix this?

The following peocess corrects the calendar entry:
edit the contact & change the birthday, save the change; edit the contact & change the birthday to the correct value, save the change again. The calendar entry then displays on the correct date. Alternatively as a temp solution I can just de-select the "birthdays" calendar which stops the icon being displayed.
Thanks for your advice, I think that it's n going to be a slow process to fix all the entries for not much return.

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data. How can I retrieve all the lost data??

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

Can DTrace do this (hardware level data)

Similar Messages

Maybe you are looking for