Can DVB-T Integrated tv tuners receive analog signal froma cable?

Hello , i have an HP Pavilion DV-7 1020el with an integrated DVB-T tuner , so my question is can it receive analog signals from cable or only digital. I live in a region where digital broadcast isn't available , only analog ( Romania)
When i try to scan for channels i dont pick up anny channels at all . I have been to Italy and there i could pick up channels , but there they have digital DVB-T signal , so am i doing something wrong or my tuner just cant receive analog signal from regular cable tv.

Did you get a response to this from HP?
I ahve the same query.

Similar Messages

Can an iPad with iMessage enabled receive a text from an iPhone that has iMessage DISabled?

Can an iPad with iMessage ENabled receive a text from an iPhone that has iMessage DISabled?

A "non-iMessage-enabled text) would be an SMS message. iPads do not handle these and they do not go through an Apple server to be "converted". SMS is a function of a cellular carrier, not Apple.

What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

What can I expect of my 4s with wifi connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.

How do create an analog signal from a text or binary file?

I'm trying to output an analog signal from a file on an NI-DAQ 6251 card using labview 8.5. I've found the examples on building a waveform, but I'm stuck at how to read a text file and make a 1-D array to input my amplitudes into the buildwaveform.vi and I can't find any information on how to do so. Any help or direction is greatly appreciated.
thanks,
David
Solved!
Go to Solution.

If all that you want in the file is the Y values, then a text file with a value on each line could be read. The Read From Spreadsheet File can be used. It will return a 2D that you can then use the index array function to get a column or if you select Transpose, the returned 1D array would be used.
If you want to create an example, use a 1D array constant in a VI and pass it to the Write to Spreadsheet File.

Analog signal from Laser Power Meter

Hello,
First, I have to say that I am new using Labview.
Probably for some of you the question I am going to ask is pretty easy, hope you guys can help me solving this.
I am trying to acquire an analog signal from a Fieldmate Laser Power meter, the specifications from this meter are shown in the link below:
http://www.coherent.com/downloads/FieldMateDataSheet.pdf
I need to get the signal and save it in MS Excel files. My big issue is with the acquisition of the signal from the meter to the NI Board. I am using an NI SCB 68.
Hope you guys can help me.
Thanks.

The SCB68 is just a shielded connector block, not a DAQ device.
Use NI's MAX utility (Measurement & Automation Explorer) to find out what DAQ card you have installed in the PC.
There are also plenty of analog acquisition examples that ship with LV, Search Examples in Help.
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

I have just come back from morocco where my phone worked ok using the morroco network, but since returning to the uk I can't get it to pick up a signal from the 'Three' network, have tried resetting etc but still wont work, any suggestions

banannaphone,
Welcome to Apple Discussions.
Quit Safari, find the com.apple.Safari.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

Cannot received TV signal from my numerci decoder to my Qosmio F20

Hello all, i've just bought a new notebook Qosmio F20, everything works fine except the tv tuner.
I've tried to plugged a scart cable, a yellow-red-white cable and one antenna cable in my notebook and in my numeric decoder (Atlanta 5400) but i cannot received any signal.
The best i can have is one second of sound of the first channel on each canal of windows media center.
I'm working as an informatic technician but cannot find a solution to this problem, is there something special to do to received the television on my laptop?
Hope to have news soon, thx to all in advance

Hi
If you want to watch TV on your Qosmio there are two ways. To use cable TV coaxial antenna or sat TV (sat receiver). Coaxial antenna must be connected to antenna in port at the back side.
If you receive the channels on sat receiver you can watch it on your notebook to. In this case use composite in port. The channels must be changed on the receiver and the TV tuner will detect just one channel like on TV itself.
Composite in port you can use to connect the VHS recorder on to notebook. On this way you can watch old cassettes on notebook display or even record them and burn to DVDs. I have tried it with Media Center Edition. It takes a long time but it works.
Bye

Analog signal from PXI

Hi everybody,
I have a problem: I cannot acquire 6 analog signals with a PXIe 8135 with 4MS/s. I use two boards with 4 MS/s, 16 bits and 8 Analog Inputs. I use a subVI of SAMPLE CLOCK for configuration with this parameters, Continuous SIGNAL, SAMPLE RATE = 4MS/s ( see attachment ). With one signal is ok, but with 2 signals, i have an overload Memory Message.
Where is the problem in the VI?
Thanks for your help.
Attachments:
acq_and_graph.zip ‏165 KB
acquire&loggdata.png ‏230 KB

Quickly looking through your code now, try removing the "Number of Samples analog". Since you are using Continuous Samples, you are just limiting the buffer and also limiting how many samples you can read at a time.
But you might want to think about using Finite Samples. You know how long you want to log for and you know your sample rate. So why not just do the simple math and tell DAQmx to get that many samples? You can use the DAQmx Task Done? VI to see if it is done. That would be much simpler than checking the time that has elapsed.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Hp s2031 monitor will not receive premium channels from cable tv, due to hdcp. what to do?

I am moving to a building with only cable tv reception. I plan on ditching an old, huge (not flat screen) tv and will use my hp s2031 monitor with a tv tuner that will receive from a cable connection. I will gladly pay for premium channels like hbo, starz, etc., but my hp s2031 monitor has HDCP, which apparently will block premium channels. Am I incorrect? Surely hp has a fix for people who are willing to pay for content. I cannot afford a new monitor, and I do not want to lug my current giant to the new location. The screen on my laptop is much smaller.
This question was solved.
View Solution.

You are incorrect. HDCP (high definition content protect) prevents HD content from being sent over analog signaling. Since your HP s2031 monitor has both VGA (analog) and DVI-D (digital) inputs, you will need to use the DVI-D input to watch HD content. Your cable box will most likely have a HDMI output. To use this with your monitor will require a HDMI-to-DVI cable.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

My iPad suddenly stopped receiving cell signal from Verizon and in the top left corner it says Invavid SIM where it used to say 3G

MY 2 week old IPad 2 suddenly stopped receiving a cell signal from Verizon and in the top left corner of the screen it says Invalid SIM where it used to say 3G. Why did this happen and how do I fix it? Still works on WIFI...

Why? Who knows. You could try reseating the SIM to see if this helps. If not contact Verizon.

How can I measure the frequency of an analog signal?

Hi, I am trying to measure the frequency of VAC signal coming from a gas turbine engine at my university. If I can get the values of frequency, I can determine the speed (RPM) of the engine. I am fairly new to LabVIEW and I have been looking through manuals like crazy in order to find out how to obtain the frequency. I have measured the signal with an oscilliscope and the highest frequecy will be about 1.5kHz. I am currently using a USB-6218 and it can collect the voltage signal with ease, but it won't give be analog frequency so simply. Can anyone explain a way for me to obtain the frequency values? And if you could show or tell me in a very simple way (because I am not very fluent in LabVIEW yet), that would be amazing! Thanks!

Check this out:
Attachments:
RPM.vi ‏17 KB

Where can I found hardware to get analog signal from VCR and work with labview and then sample this signal in very high frequency?

I am trying to build a Digital Video Recorder using Labview. The problem is that I found that Labview sample the signal in the order of milisecond. I wanted it to be in the order of microseconds. Also I am looking for a cheap Hardware solution if it is possible

Your question does not make a lot of sense to me, so I will just point out a few things.
1. The PCI-1411 works well with VCR signals. It has a BNC connector as well as a S-Video connector. The price is under $1000, so it is fairly reasonable. The amount of time you save getting it to work with LabVIEW is worth any extra cost.
2. The PCI-1411 is sampling three colors at 30 frames per second, with an image resolution of 640x480. This is the best resolution you are likely to get from a VCR signal. The sampling rate for each byte in the image is about 28 MB/sec. This is in the microsecond range that you are looking for, I think. If you are only interested in the raw signal instead of the image, you could look at the high speed digitizing boards NI sell
s that acquire at higher rates.
If this information isn't really what you were looking for, perhaps you could clarify your question.
Bruce
Bruce Ammons
Ammons Engineering

How can i acquire analog signals from PXI 4472 card?

Regards
Aks
(Appreciate answers by giving KUDOS)
Hit the stars.............. sky is not the limit.

There are a lot of shipping examples for DAQmx. Once you open the example finder (Help>Find Examples), use the 'hardware' listbox at the bottom to find all of the examples that pertain to a 4472.
Message Edited by Dennis Knutson on 10-28-2008 07:30 AM

Can Westell 327W DSL modem/router receive wireless signal?

I have a spare Westell 327W wired/wireless DSL modem/router. I need a wireless access point for a G4 Power Mac away from an Apple Extreme. I knew how to make the Westell 327W in a bridge mode. Is there a way to make 327W communicate wirelessly with a FIOs modem/router?
Thank you very much.
Robert

Hmmm, perhaps something like this with a USB extension cord would be a solution, they have better Range even without an extension than Airport cards ime...
http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10303&Item=NWTMXP802NU2C

Why is the Analog signal from the FPGA is distorted?

Hi,
I am using the PXI-7831R board with LabView 2010. I'm trying to transmit TDMS files from the computer hard drive via the analog output of the 7831R. I've used the "Basic DMA output - R series" example and replaced the generated signal with a TDMS file. When I tried it on a synthesized pure sine file, it transmitted the positive part of the sine wave (which was a little distorted) but instead of the negative part I saw 0V DC. When I tried to use a "real" TDMS file (that I sampled earlier) the signal came out completely distorted. In both cases I used a graphic output in the host VI and checked that the data coming from the file is ok. Can anyone help me with that?
I would also appreciate some explanations on the "Update Rate" block (I suspect that he's the one causing all my trouble) - how am I supposed to use it and is it mandatory?
Thanks in advance.

It sounds like when you are using the sine wave, you are clipping the data. I am assuming that this is because you are sending it negative values. R-Series cards can not handle fixed point values, so try to offset the signal so that the lowest point of the signal is at 0. See how that works for you. As far as the Update Rate goes that controls the speed of your loop. If you do not set it high enough, the loop will simply run as fast as it can. I hope you find this helpful.
Brandon Treece
Applications Engineer
National Instruments

Can DVB-T Integrated tv tuners receive analog signal froma cable?

Similar Messages

Maybe you are looking for