Can ECC customer's address be updated in CRM5.0

Hi,
In my envinronment, BPs in CRM are replicated from customers in ECC.
Then I cannot update BP address via t-cd:BP.
Is it due to some configurations?
I can update marketing attribute or some fields,
but I can't update address in CRM.
I'm not sure if it is right behavior.
Please tell me.
Regards,
Fukuhara Yohei
Edited by: Yohei Fukuhara on Feb 2, 2010 12:13 PM
Edited by: Yohei Fukuhara on Feb 2, 2010 3:39 PM

Hi,
I do not know the solution to this, but yes this is a standard functionality, ECC customers cannot be changed in CRM except for just a few other fields.
See if you can create 'New' address in the Address overview tab. Hope you find a solution to it.
Regards.

Similar Messages

  • Customer Email Address Update

    Hi People,
    Could anyone let me know how can Cusomter Email Address be updated in R/3 without using BDC and LSMW? Is there any function module specifically to update email address of a customer?
    Cheers

    Hi,
    Use the below BAPI
    'BAPI_CUSTOMER_CHANGEFROMDATA1'
    Regards
    Sudheer

  • Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

    Hi, Dear. I purcahse my iphone 4S on of the guy, my problem is when i update any app from App store and i click update there is an e-mail address is coming which i doesnt know about the password, how can i revome the e-mail address for update our apps.

    Yes. Delete the Apps that were not Purchased using Your Apple ID.
    But a Restore as New is the way to go.

  • I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

    I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
    iselect the customer?

    Hi bazza,
    We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
    First let's take James advice and concatenate the address in the address table.
    Here is the formula in G2
    =CONCATENATE(B2&"
    ",C2&"
    ",D2&"
    ",E2)
    It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
    This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
    Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
    base tells OFFSETwhere to start counting from. Click A1.
    row-offset is for the row. we will use MATCH() -1 to give us the row.
    What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
    column-offset tells OFFSET which column A=0 so we want 6.
    we ignore "rows", "colomns" we don't need them.
    If this seems like too much, just break it down into small pieces.
    quinn

  • What I can do? I try to update my iphone 4 and I get this message on my computer itunes: Sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.

    what I can do? I try to update my iphone 4 and I get this message on my computer itunes: Sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.

    Contact your Carrier...
    Also see this discussion.
    https://discussions.apple.com/message/21189708

  • In which transaction can we see the address number of customer?

    Hi All,
    In which transaction can we see the address number of customer that appears in KNA1 table ADRNR field?
    I tried XD03 and VD03 transactions. I was not able to find it out. Can any one help me out to findout this.
    Thanks,
    Vinod.

    HI Vinod,
    The customer address is visible on the transaction. But to store this address in DB the whole address i sliked to a number and then stored in DB. So this addressnumber will not be in the Txnl screen.

  • How can I change my iCloud email account? My apple ID was correctly changed but my @me account and @icloud account addresses need updated to reflect my married name.

    My apple ID was correctly changed but my @me account and @icloud account addresses need updated to reflect my married name.

    I tried that without any luck. I was hoping I could get Apple to reset it for me or delete the account so I could recreate it or at least tell me what is listed as my birth date, the security question answer.

  • CRM Relationship to ECC Customer Partner function

    Hi,
    When a BP is created in SAP CRM it is replicated to SAP ECC as a customer.
    The mapping of the BP classification to Account group has been made in transaction PIDE. A partner determination procedure is also been assigned to the account group.
    Now, when the BP is replicated to ECC, the customer is created however the partner functions like Sold-to, Ship-to, Bill-to and Payer are not populated automatically.
    Example.
    BP 1001 is created in SAP CRM
    In ECC Customer 1001 is created, however in the sales area data (partner function) tab no partner function is populated.
    I was expecting the partner functions to be as follows
    Sold-to 1001,
    Bill-to 1001,
    Ship-to 1001,
    Payer 1001.
    This however remains empty and has to be updated manually right now. How can this be fixed? Do I need to do any additional configuration?
    Also if I maintain a relationship  in CRM for the BP say bill-to relationship, the partner function should be populated with the right BP(customer) number in SAP ECC.

    Hi,
    For partner to be determined in BP ,you have to set up partner determination for Customer Master in ECC..
    path: spro-SD-BF-part determination
    -create partner Det procdure
    -Assign the partner functions.
    -Assign the partner determination to your account group.
    Hope it helps..
    Thanks,
    veru
    Edited by: veru p on Apr 13, 2010 1:24 PM
    Edited by: veru p on Apr 13, 2010 1:25 PM
    Edited by: veru p on Apr 13, 2010 1:26 PM

  • Gmail custom From address - Mail

    This is a great feature for Gmail users that can hopefully be used in Mail.
    Through the Gmail web portal you can select which 'From' address is displayed in that sent message. This needs to be setup prior to usage according to these instructions: http://mail.google.com/support/bin/answer.py?hl=en&answer=22370
    *Is there a way to setup custom 'From' addresses in the Mail.app?* More to the point: *Can Mail.app use my Gmail custom 'From' addresses?* Mail.app is using imap/smtp server protocols. Gmail requires that you provide verification for each address you add; addresses that you control.
    Thank you in advance for any suggestions!
    Madison

    Thanks for the response Ernie, here is a bit more info on what I'm hoping to do (or as you suggested questions/thoughts for finding a workable alternative).
    Through Gmail (via browser) i'm able to select which address the recipient will see when they receive my message. This is done in the Compose Message phase. I currently have two email addresses that i'm using; my university account and personal (gmail) account. For correspondence through school I would like to reply via my university address. Fortunately using Gmail (via browser) this has consolidated both emails to one place where I can receive and send from both addresses.
    I was hoping to use my IMAP/STMP connection so that all my emails, calendar entries and contacts are located on Google's services. Having everything on my Google account allows me to send & view emails, calendar, and contacts from my phone, computer or campus computer.
    As you explained Gmail maintains Authentication through SMTP. I guess what I should be asking is how to add (if possible) outgoing mail servers to Mail. I may be confused on exactly what Gmail is doing when sending my various custom 'From' emails but I believe they are just manipulated so that messages are received from the selected 'From' account. Unfortunately, if I don't use my Gmail STMP those sent messages aren't saved in Gmail.
    When using my MacBook though I wanted to have this functionality through Mail.app so that I wouldn't have to use the browser.
    *If you have some suggestions for alternatives I would be interested in checking them out.* I do have a ISP email account, but I foresee a bit of a mess; as stated using Google has allowed me to unify all my communications and access them easily, instead of having various accounts to constantly check and update.
    Thanks again,
    Madison

  • Create/update Shipment in ECC when TU was created/updated in EWM

    Hi All
    Conventional way is to create Shipment in ECC and with IDoc interface create TU in EWM. Can we create shipment in ECC when we create TU in EWM? Also the updates made to TU?
    Are there are any PPF actions/BADIs for this?
    Also I would like to know if we can maintain custom statuses for TU.
    Thanks
    Sasidhar Gupta

    Hi Juergen
    Thanks a lot, this solved the issue. However later I found that this was mentioned in the activity documentation of activity "Define Default Values for IDoc Outbound". But the node was not clear. Initially I thought this is something to be maintained in ERP. After your reply I understood that this is EWM activity.
    Note:
    You need to define a separate shipment type in ERP. Use this shipment type for message type SHPMNT. The IDoc is only filled with this shipment type if transportation planning type is "B - Obligatory Internal Planning in EWM". This shipment type for transportation planning type B must be different from the shipment types that you use for transportation planning type "A - Obligatory External Planning in ERP". Otherwise, ERP sends an IDoc back to EWM, which is not intended within warehouse outbound processing with transportation planning in EWM.
    Still I see some errors in ECC while processing IDoc (due to internal config issues). I'll update you on this.
    To note, this action was triggered only after GI is posted. Also log related to this is not visible in the log we get on TU screen but visible in system logs.
    Thanks
    Sasidhar Gupta

  • How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

    How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • How to get changes of a custom PL/SQL package updated in ISG?

    Hi All,
    I need some help on how to change a custom PL/SQL package in ISG integration repository:
    I already uploaded my custom PL/SQL package to the integration repositoy some time ago. Now I have made some changes to PL/SQL record/table types defined in the package (added some fields and removed some others). These changed record/table types are used by a procedure I already uploaded to the integration repository. When regenerating the WSDL for my PL/SQL package in integration repository I get an error that the wrapper for respective procedure can't be found. When checking up the SQL types that were automatically generated (by JPublisher) for corresponding PL/SQL types, these generated SQL types are invalid...
    So it seems that in one case JPublisher generated an empty SQL type (with no attributes). In another case JPublisher generated the SQL type with old attribute list, so it didn't adopt the changes of corresponding PL/SQL type in the package...
    Can anybody tell me how to get the changes of a cusotm PL/SQL package updated in ISG? Or is there any possibility to first remove a whole PL/SQL package from the ISG integration repository (and getting rid of all old automatically generated SQL types), so that I can newly upload my PL/SQL package afterwards?
    Thanks
    Konrad
    Edited by: Konrad on 24.10.2011 10:51

    Thanks Daniel, for your reply...
    (-> for info: I'm a colleague of Konrad...)
    Yes, we used a higher version number - and the upload of iLDT file works fine...
    But, the problem occured when generating the WSDL...
    However, I think we have found an approach of how to get the changes of a custom PL/SQL package updated correctly in ISG:
    1. Save a copy of PL/SQL package and then delete it in the database
    2. Regenerate the WSDL for PL/SQL package in ISG (seems that all atutomatically generated JPub wrappers and SQL types are also deleted)
    3. Restart all processes
    4. Create the changed version of PL/SQL package in the database again
    5. upload of iLDT
    6. Regenerate the WSDL for PL/SQL package in ISG
    Best Regards
    Carolin

  • Add ECC Custom Fields in CRM Web UI ERP Order item

    hi all,
    i have to Add ECC Custom Fields in CRM Web UI ERP Order item .
    I have :
    -  add the field on Web UI Screen.
    -  add the field on structure  TDS_item_COMV  and  TDS_item_COMC in ecc
    -  insert record for field on LORD_MAPPING table
    -  implemented badi BADI_LORD_DO_PA BADI_LORD_GET_INPUT_MODE.
    -  implemented method GET_I_S_STRUCT on crm with  :
    CASE COMPONENT.
        WHEN 'ZZSPOND'.
          RV_DISABLED = ABAP_False.
    endcase.
    - on method  do_prepare_output i have change value of fields with code :
    lr_loop = typed_context->erpadmini->collection_wrapper->get_first( ).
    WHILE lr_loop IS BOUND.
    posnr = lr_loop->get_property_as_string( iv_attr_name = 'POSNR' ).
    Does the current item has to be set for "Sponda Idraulica"?
    READ TABLE Z5CL_GSA_TOOL0001=>GT_ITEMS_SPOND INTO ls_spond
                                  WITH KEY posnr = posnr.
    IF sy-subrc = 0.
    lr_loop->set_property_as_string( iv_attr_name = 'ZZSPOND' iv_value = 'X' ).
    DATA : V_X TYPE STRING.
    V_X = lr_loop->get_property_as_string( iv_attr_name = 'ZZSPOND' ).
    ENDIF.
    lr_loop = typed_context->erpadmini->collection_wrapper->get_next( ).
    ENDWHILE.
    I can't change the field  value  because it is "not changeble"  .
    Can you help me ?
    Thanks in advance.

    Hi Celi,
    I have created some fields at header level of ERP Order, and the user is available to change them, replicating the information to SAP ECC (using interface LORD II). 
    All sales item information is treated using RFC ERP_LORD_GET_ITEM_MULTI, available in SAP ECC. 
    Please check the following point:
    If those structures below were expanded with your custom fields:
    SAP CRM:
    CRMST_L2_ITEM_COMV
    CRMST_L2_ITEM_COMC
    CRMTT_ADMINI_ERPIL
    CRMTT_ADMINI_I_ERPIL
    SAP ECC:
    TDS_RFC_ITEM_COMV
    TDS_RFC_ITEM_COMC
    Please check if for your scenario is necessary to implement the enhancement BADI_LORD_DO_PAI method ADD_SUPPLY_LIST. The code below works for header level.
      DATA: ls_supply TYPE tds_field_supply.
      IF iv_object_id EQ 'HEAD'.
        IF iv_module EQ 'VBAK_BEARBEITEN'.
          ls_supply-field = 'ZZCCINS'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZCCNUM'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZCCNAME'.
          APPEND ls_supply TO ct_supply.
          ls_supply-field = 'ZZAUNUM'.
          APPEND ls_supply TO ct_supply.
        ENDIF.
      ENDIF.
    I hope it helps!
    Kind Regards!

  • Get customer invoice address from one time vendor

    Hi All,
    I am working on cheque printing.
    I have a question with in that.Customer wants if Vendor is one time vendor.
    I can identify the one  time vendor using 'LFA1-XCPDK  is 'X'  then the customer invoice assress priting in screen
    How can identify the custome invoice address from one time vendor
    Please any suggestions are helpful

    Hi Tarangini,
    I hope it is a third party scenario. Get the sales order number from the purchase order created with that vendor. EKPO table contains PO line item with sales order as the reference document.
    From the sales order , get the invoice from VBFA table. Pass this Invoice number to get the customer from (VBRK). Pass this customer to (KNA1) to get the address number. Pass this Address number to ADRC to get the customer address.
    Regards,
    Sai

  • Change Customer master Address Data using Structure biadd2 in report rfbide00.?

    hello
         i want to change Customer  Master Address Data using using RBIDE00 report program but when i execute the report it will accept input from batch file
    but the same is not getting updated in  customer master .
    please  help me to resolve this issue .
    thanks & regard
    laxmikant soni

    Found the answer from SDN - not possible unless using some BUS.
    RFBIDE00 - Address data issue
    Thread closed.

Maybe you are looking for