Can EEM script schedule

Hi All,
I would like to run a EEM script that would ping a server every 5 minutes when the serial interface is up . Is there any scheduling mechanism other than IPSLA that could help?
track 1 interface serial0/0 line-protocol
event manager applet LOSS
event track 1 state up
action 10 cli command "ping ip 192.168.1.1 so 2.2.2.2"
action 20 cli command "end"
Regards,
Sathvik K V

event manager applet LOSS
event timer cron cron-entry "5 * * * *"
Sent from Cisco Technical Support iPad App

Similar Messages

Two problems with EEM script

I have an EEM script (below) and I have two problems.
1) Line action 4.5 gets a "%Error opening bootdisk:blackhole (File or Directory already in use)"
2) Line 5.0 - 5.5 get "Line has invalid autocommand "sh mls cef hardware module 4 | append sup-bootdisk:blackhole"
Any ideas to get me on my way?
thanks!
jim

I'm guessing you'd get the same errors if you ran these commands manually in this order one after other (i.e., you pasted them into the CLI). This might just be a limitation of the file system. What you might do is conver this to Tcl so you don't need to use the CLI to store the output (or at least open the file once).
You can use the tool at http://www.marcuscom.com/convert_applet/ to convert your applet to Tcl. A simple modification would then be to remove the append bits, and store the $_cli_result into an accumulator buffer. At the end, do the email of that buffer.

EEM Script to use in an triple play network

Hi,
I have a customer which have a tripe play network. I attach the following drawing so you can have a better idea how the network looks like.
IPTV, Internet and IP telephony is getting in in our customer network at both PE some you can see in the drawing.
Basicaly our customer deliver the network infrastructure while ISP1, ISP2 and ISP3 deliver the content (IPTV, Internet and IP telephony).
The two PEs which are getting the content in the network from the 3 ISPs are running the following hardware and IOS:
cisco CISCO7606 with WS-SUP720 MSFC3 Daughterboard Rev. 3.2.
IOS version: c7600s72033-advipservicesk9-mz.122-33.SRC5.bin
BGP is used between the PEs and the ISPs router.
The PEs are redundant for each other.
Our issue is when one of the ISP is having some maintenance on their routers one the PEs goes really high on CPU until reaching 100%.
I don't know why that is happening that is why I want to use EEM to dig deeper into it.
So What I want to do is an EEM script that could do the following:
1) The script should be triggered when CPU Threshold is reached (lets say 85 %).
3) Run a show tech and save the output in flash.
2) Then the script should run do the following commando and save the outputs to flash:
        - sh ip bgp vpnv4 vrf VRF10102 neighbors
        - sh bgp vpnv4 unicast vrf VRF10102 summary
        - sh ip bgp vpnv4 vrf VRF10102 neighbors x.x.x.x advertised-routes
        - sh ip bgp vpnv4 vrf VRF10102 neighbors x.x.x.x received-routes
        - sh isis neighbors detail
3) Run "sh log" and save the output into flash.
Anyone has an idea how I could made this script with EEM?
Thanks in advance for your help.
Best regards,
Laurent

I don't think you need a script for this. An applet should work just fine. This kind of thing is commonly done by TAC to aid in data collection for transient problems. This policy should work provided the CPU instance is correct. A 7600 will have at least two CPUs. This applet assumes CPU instance 1 is the desired CPU, but it may be CPU instance 2 you need to monitor.
event manager applet watch-cpu event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.11.1 get-type exact entry-op ge entry-val 90 exit-op lt exit-val 90 poll-interval 60 maxrun 300 action 1.0 cli command "enable" action 1.1 cli command "term exec promp time" action 2.0 cli command "show tech | append disk0:/high_cpu.txt" action 3.0 cli command "sh ip bgp vpnv4 vrf VRF10102 neighbors | append disk0:/high_cpu.txt" action 4.0 cli command "sh bgp vpnv4 unicast vrf VRF10102 summary | append disk0:/high_cpu.txt" action 5.0 cli command "sh ip bgp vpnv4 vrf VRF10102 neighbors x.x.x.x advertised-routes | append disk0:/high_cpu.txt" action 6.0 cli command "sh ip bgp vpnv4 vrf VRF10102 neighbors x.x.x.x received-routes | append disk0:/high_cpu.txt" action 7.0 cli command "sh isis neighbors detail | append disk0:/high_cpu.txt" action 8.0 cli command "show logg | append disk0:/high_cpu.txt"

Error in EEM script mail

Hi,
I'm trying to email an alert by eem script when a catalyst 6807 rises a syslog message for an environment alarm (ex: power down). I use the attached script but when i want to add the syslog message in body email (line 83) something is wrong and i can't fixed the error : catalyst try to execute the syslog message (see email).
Same error for a catalyst 4507 4506 Sup 6L-E 10GE IOS 15.2(1)E but the same script works for a catalyst 4506 Sup 6L-E 10GE IOS 15.0(2)SG.
Any ideas ?
Thanks

Hi,
I found my mystake. In the script, I commented the command "enable" and thus show commands were not recognized by cli. The script has always worked well, "Invalid input" was the result of show command. For ios 15.2, i need to gain enable level.
So I suspect a different behavior between versions 15.0 and 15.2 for running level of tcl script.

Cisco 1841/871 crash EEM scripting 15.1(1)T

We have been testing 15.1.1T on a couple of lab Cisco 1841 and Cisco 871 devices.
On the devices we are using EEM to automate the failover/failback process for a cellular modem attached to f3 on the 871 or f0/1 on the 1841. One of the EEM applets we use fires from a cron timer event that occurs every 10 minutes on the router.
IOS revision 12.4(22)T we had no problems with using the cron-timer triggered applet (every 10 minutes between 7am to 10pm), except for the fact that every command issued by EEM required AAA authentication. The EEM applet is causing our routers to saturate our Cisco ACS servers (we use 700+ routers in the field, all exectuing this EEM script) with single-connect requests. We will refer to the cron-timer executed applet as 'Maintenance' from here on out.
As of 15.1(1)T the addition to bypass the AAA authentication process became available. This was a huge speed increase to our EEM applets, specifically the Maintenance applet. I will include the applet for clairity.
event manager applet Maintenance authorization bypass
event timer cron name 10min cron-entry "*/10 7-21 * * *" maxrun 30
action 001 cli command "en"
action 002 cli command "show ip route | section B\*[ ]+0\.0\.0\.0"
action 003 regexp "^B\*.([ ]+)(0\.)+0" "$_cli_result"
action 004 set bgpstate "$_regexp_result"
action 005 cli command "show ip route | section S[ ]+208\.38\.154\.8"
action 006 regexp "^S([ ]+)208\.38\.154\.8" "$_cli_result"
action 007 set wireless "$_regexp_result"
action 008 track read 1
action 009 set track1 "$_track_state"
action 010 if $wireless eq 0
action 011       if $bgpstate eq 0
action 012             cli command "conf t"
action 013             cli command "int fa0/1"
action 014             cli command "no shut"
action 015             cli command "int tun201"
action 016             cli command "no shut"
action 017             cli command "int lo201"
action 018             cli command "no shut"
action 019             if $track1 eq up
action 020                   exit
action 021                   else
action 022                   cli command "conf t"
action 023                   cli command "int s0/0/0"
action 024                   cli command "no shut"
action 025             end
action 026             cli command "end"
action 027             cli command "exit"
action 028       else
action 029             exit
action 030            end
action 031 else
action 032       if $bgpstate eq 1
action 033             cli command "conf t"
action 034             cli command "int fa0/1"
action 035             cli command "shut"
action 036             cli command "int tun201"
action 037             cli command "shut"
action 038             cli command "int lo201"
action 039             cli command "shut"
action 040             cli command "end"
action 041             cli command "exit"
action 042      else
action 043             if $track1 eq up
action 044                   exit
action 045             else
action 046                   cli command "conf t"
action 047                   cli command "int s0/0/0"
action 048                   cli command "no shut"
action 049             end
action 050             cli command "end"
action 051             cli command "exit"
action 052             exit
action 053       end
action 054 end
This script is designed to look for a couple of routes in the IP routing table, and populate two variables (bgpstate and wireless) with the regular expression matching result of the show ip route commands. It uses track 1 to determine the up/down status of Serial0/0/0 which is the primary T1 interface for WAN services on the router. The wireless is "up/1" if the static route to 208.38.154.8 is present in the show ip route output (only when f0/1 is up in this case). The T1 is "up/1" if the default route passed to the IP routing table is present in the show ip route output.
Before the upgrade to 15.1(1)T these scripts ran without issue, and we had no errors. Now after the upgrade, anytime this script fires and the show ip route match for the wireless variable is 1 instead of zero, it begins to run through the else condition starting at action 031, and during the second execution of the script every 10 minutes (I still have not figured out how to force the cron-timer to fire only ONCE per minute, instead of at the beginning and end of the minute), the router will generate spurious memory errors, and sometimes crash or reboot.
This all began with 15.1(1)T, and I have not seen any caveats or other entries that could possibly point to the cause of this problem. Any ideas?
I am also attaching a crash file from one of the routers like this one so you can see what I mean.
All of these devices are running the advipservices k9 version of this IOS.
Thanks for your time.

The problem with cron events running twice in the same minute is bug CSCsz12460 which will be fixed in EEM 3.2 in 15.1(3)T.
The crash you're seeing doesn't appear to be related to EEM at all. It looks like a problem with single-connection TACACS+. The bug appears to be CSCtg40901 which has not yet been fixed in 15.1T.
A workaround was suggested to use multiple-connection TACACS+.

Most Basic EEM Script to Send E-mails

I have read through various blogs and Cisco posts and still cannot seem to get this to work. I am simply trying to get the router to send the "show ip int br" info via e-mail from a G-Mail account to a G-Mail account. I am wondering if this is unsupported because G-mail uses TLS/SSL and different ports and I can't seem to defined this anywhere. Can anyone confirm?
I manually run the EEM script via "event manager run IPAddressNotify". I have made sure that the router can ping "smtp.gmail.com" (IE IP reachability and name-lookups are successful).
event manager environment _email_to [email protected]
event manager environment _email_server gmailusername:[email protected]
event manager environment _email_from [email protected]
event manager applet IPAddressNotify
event none
action 1.0 info type routername
action 1.5 cli command "enable"
action 2.0 cli command "show ip int br"
action 8.0 mail server "$_email_server" to "$_email_to" from "$_email_from" subject "Router reload - IP Address info for $_info_routername" body "$_cli_result"
action 9.0 syslog msg "E-mail was sent"

Joseph,
Thanks for the info! This is perfect. Can you verify that my logic is clear, just so I know I am interpreting this correctly.
Right now, my IOS version does NOT support the "secure" and "port" parameters for EEM. Since G-Mail does NOT support unencrypted SMTP (verified), there is no way that I can use EEM or TCL to e-mail myself messages. Correct?
When you state that my username cannot have an '@' in it, is this referring to the 'from' field which would be "[email protected]"? Or, is this referring to the 'server' field which would be "gmailusername:[email protected]". Luckily, Google lets me authenticate by specifying 'gmailusername', rather than '[email protected]'. This should work then correct?

Simple EEM script that references SLA but is inconsistent?

Hi,
Just a little confused here..... I can do the exact commands in the EEM script directly and it does what I need it to do. However, the script, when triggered, with the "EXACT" same commands sometimes works / sometimes not. Arrrgghhh! So, here is the script:
event manager applet Virtual-PPP1_Ping
event syslog pattern "TRACKING-5-STATE: 1 ip sla 1 reachability Up->Down"
action 010 cli command "enable"
action 011 cli command "clear vpdn tunnel l2tp all" pattern "[confirm]"
action 012 cli command "confirm"
action 020 cli command "conf t"
action 030 cli command "int Virtual-PPP1"
action 040 cli command "shut"
action 045 wait 3
action 050 cli command "no shut"
action 060 cli command "end"
Basically what happens is that the Virtual-PPP1 interface sometimes loses it's ip address through IPCP. So, the L2TP tunnel is still up, BUT, the Virtual-PPP1 interface loses it's assigned IP when I check the interface as it shows "unassigned".
Ideas?
Thanks for the help.
Jason

Try this instead:
event manager applet Virtual-PPP1_Ping
event syslog pattern "TRACKING-5-STATE: 1 ip sla 1 reachability Up->Down" maxrun 30
action 010 cli command "enable"
action 011 cli command "clear vpdn tunnel l2tp all" pattern "confirm"
action 012 cli command "confirm"
action 020 cli command "conf t"
action 030 cli command "int Virtual-PPP1"
action 040 cli command "shut"
action 045 wait 3
action 050 cli command "no shut"
action 060 cli command "end"

First EEM script

                   Hi- Please help out this newbie...
I am looking for an example EEM script/applet that would cause my router to change a path selection, based on a triggered event. I usually employ Policy Based Routing on my networks which makes next hop decisions based on the source IP. I want to do something similar with EEM, but rather than a simple source address based decision, I want a next hop selection to be based on an event. (for the example, it could be anything...bandwidth threshold, or at a certain time of day, or whatever). First I want to know if this can be done, and second I would appreciate it if someone could share a simple example configuration with me.   -it's the best way I learn it.
Also, in the example, how is the applet or script applied to the router?
Thanks!

You can adjust routes or add class-maps based on EEM events. However, you can't match on something that can be controlled by an EEM event (i.e., match within a route-map). However, you can create a route-map on the fly when an event occurs. That is, when your event occurs, you can define a route-map to match on the interesting traffic and adjust the IP next-hop. Bottom line is if you can do something manually on the CLI, you can automate it with EEM.
Without knowing more specifics, I'll provide an example that will allow you to run CLI at a specific time (at midnight). You can adapt this to meet your specific needs. This applet can be copy and pasted directly into config t mode:
event manager applet timed-cli
event timer cron cron-entry "0 0 * * *"
action 1.0 cli command "enable"
action 2.0 cli command "config t"
action 3.0 cli command "route-map TEST"
action 4.0 cli command "match interface gi0/0"
action 5.0 cli command "set ip next-hop 10.1.1.1"
action 6.0 cli command "end"

EEM Scripts on a Catalyst 3750G

Does anyone know if I can run EEM scripts on a Catalyst 3750G switch? If so, what version of IOS do I need to make it work?
Thanks!

Joseph,
I want to create a simple EEM script on a Catalyst 3750G running ipservices IOS on it. All I want to do is monitor interfaces GigabitEthernet 1/0/3 and GigabitEthernet 1/0/4. If either of these interfaces go down, I wan the EEM script to shutdown interface GigabitEthernet 1/0/26. Here is what I put together so far. I haven't tried it yet, but do you think this will work?
Thanks!
event manager session cli username "root"
event manager applet Stop_Announcing_BGP
event syslog pattern "Interface GigabitEthernet1/0/3, changed state to down"
event syslog pattern "Interface GigabitEthernet1/0/4, changed state to down"
action 1.0 cli command "enable"
action 1.1 cli command "configure terminal"
action 1.2 cli command "interface gig1/0/26"
action 1.3 cli command "shut"

How to script schedule in sql server agent

Hi,
How to script schedule in sql server 2005. When I click on script option in manage schedule, there is message ' there is no action to script'. So my question is how to create script for these schedule?
Thanks

As far as I can tell, there is no way to script an entire schedule using SSMS..
Hi D.,
this is not true - you can create, alter and delete ANY schedule with SSMS.
msdb.dbo.sp_add_schedule: create a new schedule
msdb.dbo.sp_update_schedule: alter an existing schedule
msdb.dbo.sp_delete_schedule: removes a schedule
msdb.dbo.sp_attach_schedule: set a schedule for an existing job
msdb.dbo.sp_detach_schedule: remove a schedule from a job
@dba_learner
all above stored procedures are located in msdb and fully documented.
Scripting of elements of a job can only take effect if you do any changes to it. Otherwise the best practice is th click right on the job -> [Script job...]-> [create to new window] to get the COMLETE syntax for the creation of the job. There is one step
for the schedule and its usage, too!
Uwe Ricken
MCM SQL Server 2008
MCSE - SQL Server 2012
MCSA - SQL Server 2012
db Berater GmbH
http://www-db-berater.de
SQL Server Blog (german only)

Need help!!! new to EEM scripting

Hello All,
I am new to TCL scripting, could i get some documents that would help me learning EEM scripting.
Regards,
Sathvik

This site is full of examples and documents (check out the "Documents" tab) to help you. There is also the official docs on Cisco.com at http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_policy_tcl.html . You can also look at the Cisco Press book TcL Scripting for Cisco IOS that includes material about EEM-specific Tcl scripting.

Create script\schedules task to clear local app temp files every 1 hour (PS last modified 2 hrs) ? WINDOWS 2008 R2

create script\schedules task to clear local app temp files every 1 hour (PS last modified > 2 hrs) ? WINDOWS 2008 R2
can i have the steps to this...how to do?

This forum is for scripting questions, not script requests.
You can search the
Repository for pre-written scripts, and you can also request scripts at the
script request page.
-- Bill Stewart [Bill_Stewart]

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

How can I script a Flash .exe file to always stay on top of all other windows?

Hi All,
I'm new to action script, and I just need this one script
> How can I script a Flash .exe file to always stay on top of
all other windows?
Basically what i want to do is have a flash-created
step-by-step instructional movie, but for the movie to remain on
top of all windows so the instructee is able to follow the
instructions on-screen...
It would be preferable to not have to buy another product
just to do this... as I said, this is the only scripting I need.
Thanks in advance
Cheers
Rick

if you create your exe with mProjector you can use one of its
new AS
commands to do this.
setZOrder
http://www.screentime.com/software/mprojector/docs/mWin_setZOrder.htm
all APIS
http://www.screentime.com/software/mprojector/docs/index.html
Demo
http://www.screentime.com/software/mprojector/demo.html
mProjector installs new classes and help into Flash, to
enable them you
must build your app with mProjector (its input is your swf)
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

Monitoring dual core (Supervisor Engine 7-E) through EEM Script.

Hi,
I have a Cisco Catalyst 4500E Supervisor Engine 7-E and configured an EEM Script to monitor the dual core CPU Utilization through PRTG Network Monitor.
event manager applet dualcore authorization bypass
event timer cron cron-entry "* * * * 0-6"
action 100 cli command "en"
action 120 cli command "show process cpu | include five"
action 220 regexp "Core 0: CPU utilization for five seconds: ([^%]+)%; one minute: ([^%]+)%; five minutes: ([^%]+)%.*" $_cli_result result c0cpu5sec c0cpu1min c0cpu5min
action 240 if $_regexp_result eq 1
action 260 end
action 320 regexp "Core 1: CPU utilization for five seconds: ([^%]+)%; one minute: ([^%]+)%; five minutes: ([^%]+)%.*" $_cli_result result c1cpu5sec c1cpu1min c1cpu5min
action 340 if $_regexp_result eq 1
action 360 end
action 440 cli command "config t"
action 441 cli command "snmp mib expression owner cisco name c0cpu5sec"
action 442 cli command "expression $c0cpu5sec"
action 443 cli command "snmp mib expression owner cisco name c0cpu1min"
action 444 cli command "expression $c0cpu1min"
action 445 cli command "snmp mib expression owner cisco name c0cpu5min"
action 446 cli command "expression $c0cpu5min"
action 550 cli command "config t"
action 551 cli command "snmp mib expression owner cisco name c1cpu5sec"
action 552 cli command "expression $c1cpu5sec"
action 553 cli command "snmp mib expression owner cisco name c1cpu1min"
action 554 cli command "expression $c1cpu1min"
action 555 cli command "snmp mib expression owner cisco name c1cpu5min"
action 556 cli command "expression $c1cpu5min"
action 600 cli command "end"
end
It works fine but on the logging buffer there are a lot of %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:moncores) messages   -one per minute-   here an example:
Oct 29 17:54:01: %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:dualcore)
Oct 29 17:55:01: %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:dualcore)
Oct 29 17:56:01: %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:dualcore)
Oct 29 17:57:01: %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:dualcore)
I considered to use the logging suppress duplicates command to prevent the consecutive logging of more than one copy of the same system logging (syslog) message but it is only available to the Cisco IOS XR.
Someone could help me to determine if it is possible to avoid this messages through Embedded Syslog Manager, I tried to do that but
I was not successful.
Regards,
~Sergio

Hi,
I did transitioned CLI actions to the EXPRESSION-MIB SNMP but I could not receive anything information about the dualcore utilization on the PRTG Network Monitor and received a lot of %HA_EM-7-FMFD_SNMP_ERRCODE: fh_fd_snmp_errcode: Error status: 6 NO_ACCESS_ERROR: 1. messages on the WS-C4507.
Considering the initial EEM script, could ypu help me to avoid the %SYS-5-CONFIG_I: Configured from console by on vty0 (EEM:moncores)
messages using Embedded Syslog Manager.
Here some snmpwalk to validate that I could not get the OIDs to monitor both cores.
STEP 1     Only one value is given because there is only one physical cpu.
cpmCPUTotalPhysicalIndex
1.3.6.1.4.1.9.9.109.1.1.1.1.2
C:\usr>snmpwalk -v 2c -c m4nc4rc0 10.20.91.2 1.3.6.1.4.1.9.9.109.1.1.1.1.2
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.2.4000 = INTEGER: 4000
STEP 2
entPhysicalName
1.3.6.1.2.1.47.1.1.1.1.7
C:\usr>
C:\usr>snmpwalk -v 2c -c m4nc4rc0 10.20.91.2 1.3.6.1.2.1.47.1.1.1.1.7.4000
SNMPv2-SMI::mib-2.47.1.1.1.1.7.4000 = STRING: "Linecard(slot 4)"
#sh mod
Chassis Type : WS-C4507R+E
Power consumed by backplane : 40 Watts
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1    18 10GE (X2), 1000BaseX (SFP)             WS-X4606-X2-E      JAE151904JC
2    24 1000BaseX (SFP)                        WS-X4624-SFP-E     JAE152001AE
4     4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1522L0G1
5    48 10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V JAE12067N8K
M MAC addresses                    Hw Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
1 e8b7.4880.e5db to e8b7.4880.e5ec 1.2                               Ok
2 e8b7.48cc.6167 to e8b7.48cc.617e 1.2                               Ok
4 4055.39d7.76c4 to 4055.39d7.76c7 1.0 15.0(1r)SG2 03.01.01.SG      Ok
5 001e.f7da.d290 to 001e.f7da.d2bf 4.1                               Ok
Mod Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
4   Active Supervisor   SSO                 Active
STEP 3
cpmCPUTotal1minRev
1.3.6.1.4.1.9.9.109.1.1.1.1.7
C:\usr>snmpwalk -v 2c -c m4nc4rc0 10.20.91.2 1.3.6.1.4.1.9.9.109.1.1.1.1.7
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.7.4000 = Gauge32: 9
C:\usr>
ADDITIONAL INFORMATION
C:\usr>
C:\usr>snmpwalk -v 2c -c m4nc4rc0 10.20.91.2 1.3.6.1.2.1.90
SNMPv2-SMI::mib-2.90.1.1.1.0 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.1.2.0 = Gauge32: 0
SNMPv2-SMI::mib-2.90.1.1.3.0 = Gauge32: 0
SNMPv2-SMI::mib-2.90.1.1.4.0 = Gauge32: 0
SNMPv2-SMI::mib-2.90.1.1.5.0 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.3.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = STRING: "9"
SNMPv2-SMI::mib-2.90.1.2.1.1.3.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = STRING: "11"
SNMPv2-SMI::mib-2.90.1.2.1.1.3.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = STRING: "8"
SNMPv2-SMI::mib-2.90.1.2.1.1.3.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = STRING: "13"
SNMPv2-SMI::mib-2.90.1.2.1.1.3.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = STRING: "13"
SNMPv2-SMI::mib-2.90.1.2.1.1.3.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = STRING: "11"
SNMPv2-SMI::mib-2.90.1.2.1.1.4.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.2.1.1.4.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.2.1.1.4.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.2.1.1.4.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.2.1.1.4.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.2.1.1.4.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = INTEGER: 1
SNMPv2-SMI::mib-2.90.1.2.1.1.5.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = ""
SNMPv2-SMI::mib-2.90.1.2.1.1.5.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = ""
SNMPv2-SMI::mib-2.90.1.2.1.1.5.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = ""
SNMPv2-SMI::mib-2.90.1.2.1.1.5.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = ""
SNMPv2-SMI::mib-2.90.1.2.1.1.5.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = ""
SNMPv2-SMI::mib-2.90.1.2.1.1.5.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = ""
SNMPv2-SMI::mib-2.90.1.2.1.1.6.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = INTEGER: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.6.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = INTEGER: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.6.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = INTEGER: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.6.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = INTEGER: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.6.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = INTEGER: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.6.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = INTEGER: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.7.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::mib-2.90.1.2.1.1.7.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::mib-2.90.1.2.1.1.7.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::mib-2.90.1.2.1.1.7.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::mib-2.90.1.2.1.1.7.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::mib-2.90.1.2.1.1.7.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = OID: SNMPv2-SMI::zeroDotZero
SNMPv2-SMI::mib-2.90.1.2.1.1.8.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.8.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.8.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.8.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.8.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.8.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = Counter32: 0
SNMPv2-SMI::mib-2.90.1.2.1.1.9.5.99.105.115.99.111.9.99.48.99.112.117.49.109.105.110 = INTEGER: 2
SNMPv2-SMI::mib-2.90.1.2.1.1.9.5.99.105.115.99.111.9.99.48.99.112.117.53.109.105.110 = INTEGER: 2
SNMPv2-SMI::mib-2.90.1.2.1.1.9.5.99.105.115.99.111.9.99.48.99.112.117.53.115.101.99 = INTEGER: 2
SNMPv2-SMI::mib-2.90.1.2.1.1.9.5.99.105.115.99.111.9.99.49.99.112.117.49.109.105.110 = INTEGER: 2
SNMPv2-SMI::mib-2.90.1.2.1.1.9.5.99.105.115.99.111.9.99.49.99.112.117.53.109.105.110 = INTEGER: 2
SNMPv2-SMI::mib-2.90.1.2.1.1.9.5.99.105.115.99.111.9.99.49.99.112.117.53.115.101.99 = INTEGER: 2
C:\usr>
C:\usr>snmpwalk -v 2c -c m4nc4rc0 10.20.91.2 1.3.6.1.2.1.47.1.1.1.1.2
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1 = STRING: "Cisco Systems, Inc. WS-C4507R+E 7 sl
ot switch "
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.3 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.6 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.7 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.8 = STRING: "WS-C4507R+E 7 slot switch chassis sl
ot"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.9 = STRING: " WS-C4507R+E 7 slot switch backplane
SNMPv2-SMI::mib-2.47.1.1.1.1.2.10 = STRING: "Container of Fan Tray"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.11 = STRING: "FanTray"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.12 = STRING: "Container of Container of Power Sup
ply"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.13 = STRING: "Container of Power Supply"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.14 = STRING: "Power Supply ( AC 2800W )"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.15 = STRING: "Power Supply Fan Sensor"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.16 = STRING: "Container of Power Supply"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.19 = STRING: "Clock Module"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.20 = STRING: "Mux Buffers for Redundancy Logic"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.21 = STRING: "Mux Buffers for Redundancy Logic"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.22 = STRING: "Mux Buffers for Redundancy Logic"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.23 = STRING: "Mux Buffers for Redundancy Logic"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.24 = STRING: "Mux Buffers for Redundancy Logic"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1000 = STRING: "10GE (X2), 1000BaseX (SFP) with 6
10GE X2 ports"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1001 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1002 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1003 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1004 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1005 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.1006 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2000 = STRING: "1000BaseX (SFP) with 24 SFP Ports
Jumbo Frame Support"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2001 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2002 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2003 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2004 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2005 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2006 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2007 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2008 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2009 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2010 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2011 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2012 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2013 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2014 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2015 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2016 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2017 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2018 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2019 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2020 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2021 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2022 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2023 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2024 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2047 = STRING: "1000BaseSX"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.2048 = STRING: "1000BaseSX"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4000 = STRING: "Sup 7-E 10GE (SFP+), 1000BaseX (S
FP) with 4 SFP+ Ports"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4001 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4002 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4003 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.4004 = STRING: "Port Container"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5000 = STRING: "10/100/1000BaseT (RJ45)V with 48
10/100/1000 baseT voice power ports (Cisco/IEEE)"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5001 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5002 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5003 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5004 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5005 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5006 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5007 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5008 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5009 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5010 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5011 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5012 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5013 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5014 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5015 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5016 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5017 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5018 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5019 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5020 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5021 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5022 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5023 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5024 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5025 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5026 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5027 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5028 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5029 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5030 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5031 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5032 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5033 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5034 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5035 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5036 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5037 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5038 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5039 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5040 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5041 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5042 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5043 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5044 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5045 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5046 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5047 = STRING: "Gigabit Ethernet Port"
SNMPv2-SMI::mib-2.47.1.1.1.1.2.5048 = STRING: "Gigabit Ethernet Port"
C:\usr>

Can EEM script schedule

Similar Messages

Maybe you are looking for