Can Elements 4 and Elements 10 be installed on the same PC?

can elements 4 and elements 10 be installed on the same PC?
Message title was edited by: Brett N

lexie35 wrote:
Thank you.
Question:  The PC I have runs XP and there is only 502 KB of RAM.  E 4 runs OK but the E 10 says at least 1 GB of RAM.  Should I be concerned about lack of RAM?
David
I very much doubt you can use PSE10 with 502 kB of RAM.

Similar Messages

  • Can FCP 7 and FCP X be installed on the same volume?

    can FCP 7 and FCP X be installed on the same volume?

    Yes. When you download FCPX it moves the older suite of applications into a folder call Final Cut Studio.

  • Can Veristand 2009 and Veristand 2010 be installed on the same machine?

    I have VS2009 running on my machine. I would like to install VS2010 as an eval to start porting an implementation over to VS2010 before I pull the plug on VS2009. Can these bothe be installed and functional side-by-side on the same machine? Are there any caveats to bouncing back and forth between the two? I already have the prereqs listed on the VS2010 eval page (NI-DAQmx 9.1.5, NI-RIO 3.5 and NI-XNET 1.1).
    Solved!
    Go to Solution.

    Hi,
    I have VS2009 and VS2010 installed in my Windows XP and I can work with them without any problem.
    I also tried to port my LV2009 programs to LV2010 but I got problems with VS2009 Off-line API VIs because LV2010 can not convert them. According to the error message, NI delivered the API VIs protected (without diagram).
    I believe that you could not have VS2009 and 2010 in the same RT target.
    Cheers.
    Cláudio H.
    CHCastro

  • Can BO XI and CE 10 be installed on the same server?

    We are preparing to upgrade our existing CE 10 to BO XI; however, we were unable to obtain a test server and will need to install it on the same server that CE 10 resides on (our development server).  I heard that both versions could not reside on the same server and I need this confirmed by a SME.  Thank you.  ~emoreno

    Tim,
    I'm not sure that my question was answered.  I just need to know whether CE10 and BO XI can be installed on the same server?  I have a development server (not a VM) with CE 10 and another customer wants to install BO XI on the same server.  I heard through other sources that BO XI and CE 10 cannot reside on the same server.  I need to know if this statement is accurate?  If BO XI cannot reside on the same server as CE 10, then our contracted vendor will have to provide t this customer with a different server.  I need this information confirmed in order to notify my management.
    Thanks...EMoreno

  • Can iTunes 11 and iTunes 10 be installed on the same hard drive and OS?

    I am going to be upgrading from Mountain Lion to Mavericks.  I want to have both iTunes 11 and iTunes 10 on the same Mavericks hard drive.  I will use 11 to sync my iphone 5s and 10 to manage my library (11 drives me nuts). 
    Will iTunes 10 install and co-exist on a mavericks hard drive that already has 11 installed?
    If not I figure I'll have to partition the drive and install iTunes 10 on the second partition, but I'd rather not have to do that. 

    Also if I try to import my iTunes 11 library file into iTunes 10 will I get an error?
    Yes.
    So partitioning looks to be the best option then.
    So you are only going use the iTunes 11 partition to sync the iPhone? Nothing more?
    Any changes you make while managing the library with iTunes 10 will not be seen on the iTunes 11 partition (and vice-versa).
    Any changes you make will not be seen on the iPhone.
    Gonna have to get used to iTunes 11.
    It works very much like iTunes 10 after you turn on the sidebar.

  • Can FrameMaker 7 and FrameMaker 12 be installed on the same computer?

    My techcomm group hasn't updated Frame in a while, obviously. I'm the "guinea pig" to test how our docs work with the newest version of Frame. However, I still need to be able to work in and save existing documents for other users -- coworkers who still have Frame 7 -- to work in them.
    So... can I?

    > ... same computer ...
    What OS (obviously Windows, but XP, Vista, 7 or 8?).
    If 7 Ultimate, Pro or Enterprise, install the FM7 in XP Mode (which is a major download) to provide maximum isolation of the two FMs.
    And before you do it, let us know, because there are some considerations with XP mode on Win7.

  • Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer?

    Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer? I like the "fill light" feature in 3 and use it a lot. I would have not gotten 5 except that the images from my new Canon 5D Mk III are not re4cognized on 3. I have 5 on a laptop and 3 on my desktop but would like to have both on my desktop .

    Yes you can do this, but you can also get rid of Lightroom 3 and use the "Fill Light" command in Lightroom 5. You need to set the Process Version to 2010 (default is 2012 in Lightroom 5). Use the menu command  Settings > Process > 2010
    But honestly, you would be wise to stop using "Fill Light", as the new sliders in Lightroom 5 produce superior image quality than anything you can come up with using "Fill Light". Yes, the new sliders take a little time to get used to, but your patience and effort learning the new sliders will be rewarded. You can find some tutorials and videos on using Process Version 2012 on that Internet thing.

  • Can we have BusinessObjects 4.0 and 4.1 both installed on the same machine

    Can we have BusinessObjects 4.0 and 4.1 (tool Clients) both installed on the same machine? Why? Why not?

    4.0 and 4.1 are incremental upgrades hence both on the same machine are not possible.
    Though u can use 4.1 client tools to login to both 4.1 and 4.0 servers.
    3.1 and 4.0/4.1 together is very much possible on the other hand.

  • Can BO 5.1.8 and BOXI R2 be installed on the same server?

    Hi guys,
    Does anyone know if BO 5.1.6 and BOXI R2 can be installed on the same server, provided that the hardware is sized to cope with both environments?

    Fernando,
    Business Objects does not recommend that two different versions of our software be installed on the same server.
    Thanks,

  • Is it possible to have Indesign CS4 and CS5.5 both installed on the same Mac? 10.6.8

    We have a bunch of recent Intel macs at our corporation.  Currently they should all have 10.6.8.  They were all imaged from a base image that has Adobe CS4 embedded in it. 
    We are now using a packaging software part of the JAMF Casper suite and AAMIE to push CS5.5 to the end users.
    The problem is that we want to keep CS4 on the end user's computers in case of issues.  That way the end users can try Indesign 5.5 and see if it does everything they need to do and still have Indesign for backwards compatiblity.
    So we created a CS5.5 install package using the AAMIE tool which works fine.  We then use Casper to spam the package out to a Mac.
    The issue that arises is that a few Plugin errors occur during the lauch of Indesign CS5.5 such as:
    Adobe inDesign does not recognize InCopy Bridge UI.InDesignPlugin as a valid plug-in.
    Adobe InDesign does not recognize InCopyExport.InDesignPlugin as a valid plug-in.
    Adobe InDesign does not recognize InCopyExportUI.InDesignPlugin as a valid plug-in.
    Adobe InDesign does not recognize InCopyImport.InDesignPlugin as a valid plug-in.
    There was one more plugin error that occured before the first one but I forgot to write it down.
    If we click okay to them, the application launches okay but when you quit and relaunch it, you still get one of the errors.
    Is this because both applications are installed at the same time?
    Is it offically okay as per Adobe to have Indesign CS4 and CS5.5 installed on the same Macintosh?
    What else should we be considering what to do?

    Well currently, I'm just testing this issue.  I just installed the trial version of  Adobe CS4 suite on my mac and then deployed the CS5.5 package on top off it  The resulting errors that I listed above are the same ones that occur when the end user has a licensed volume license install of CS4 and CS5.5.
    So I'm still back to square 1 where when I deploy cs5.5 on an  end user's mac, they get those plugin errors when they launch Indesign CS5.5.  
    I am not sure about the licensing restrictions, I asked my Director and he is going to check with our VAR.

  • How can I have C++ 4.2 and C++ 5.8 installed on the same box?

    I am involved in porting C++4.2 code to C++ 5.6 and I would like to know if I could have both compilers sitting side by side on the same machine.
    While using one compiler against the other, do I have to set any environment variables to tell the compiler which set of include files it needs to use? Or are these configured during installation? (I have used the compiler for a long time but I have never thought about how the installation works)

    You should not a problem with this as long as you install each version on different uniqe directory. But please make sure the OS platform is supported by both versions. There are an issue with multiple releases on the same system with Solaris 10, but I don't think you use Solaris 10 because C++ 4.2 is not supported on Solaris 10.
    Yes, you need to set environment variables to tell the compiler which set of include files, binaris or libraries it needs to use. It is not configured during installation.
    -Ngoc

  • Can different cluster  of SAP Business One installed on the same Server

    Hi!
       Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
    Thanks,
    Jo Borlagdan

    No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
    You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
    The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
    Sorry,
    Frank
    Message was edited by: Frank Moebius
    BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

  • About Premiere: can Adobe CC and Adobe CS6 both run in the same computer?

    Hi, I have the Adobe Premiere CS6 installed in my computer.
    But now I'm gonna finish the edit of a film that someone already started editing.
    This person was working with Adobe Premiere CC.
    The question: If I install Adobe CC in my computer, will the Adobe CS6 still run?
    Can Adobe Premiere CC and Adobe Premiere CS6 both run in the same computer?

    Sure , you  can run all the version of same computer , even you can CC 2014 , CC as well as CS 6 on  same computer .

  • Is it possible to have iMovie HD and iMovie HD 6 installed on the same Mac

    While I like some of the video editing features of iMovie HD 6, the problems with the Ken Burns Effect have killed my ability to create slideshows with iMovie. This worked just fine in iMovie HD (version 5.x). Is it possible to have both applications installed on my iMac and run one for slideshow production and the other for video production?
    I searched and could not find a thread that addressed this issue. If there is one, the URL will be greatly appreciated.

    Catspaw,
    Thank you. I should have thought of this, as I am running iMovie 8 and iMovie HD 6 on an Intel iMac at work. When I installed iMovie HD 6 onto this system (I'm not a fan of the latest incarnation of iMovie), it was put into a "previous version" folder. Since my G4 iMac already has been upgraded to iMovie HD 6, I'll just put iMovie HD 6 into a folder (maybe label it as the "latest version") and then install iMovie HD 5.
    Thank you for the insight on the trash emptying messing with the re-editing of photos. If I start a new project using the same photos from iPhoto (I use the media browser within HD 6 to select my photos in my iPhoto library) and never empty the trash until the project is complete, will the problem not appear? Or, does some magic thing tag my iPhotos so that I have to reimport them into iPhoto before using them again in iMovie HD 6?

  • Can Coldfusion 9 and PHP 5.1 coexist on the same server?

    I
    found a analytics tool that I want to use for my companies intranet, and it requires PHP 5.1 to be installed on the server. This server will also have CF 9 on it as well. Will PHP 5.1 interfere with the web site and applications on the server written in CF 9?

    Yes, just be careful if security is a concern. Now you double the chance of security vulnerabilities.

Maybe you are looking for

  • 2 copies of every playlist after itunes upgrade

    I recently upgraded my itunes to version 7.1.1. Now, I have 2 copies of every playlist in my itunes and on my ipod nano. I first noticed the problem on my ipod, and later noticed it was in my itunes as well. Please help!

  • Problem with inifile.c in CVI 2010 project

    I upgraded to CVI 2010 today. I was using 2009. In my project I have included inifile.c in my project. The file is located in the CVI2010 toolbox directory. I used this in CVI 2009 and did not have a problem. When I compile I get a bunch of link erro

  • When I print list from contacts, its not alphabetical.

    Contacts are disappearing from my address book frequently so wanted to print a list. When I tried, it wasn't alphabetical. How do I get it to be alphabetical?

  • Vba-excel crashes ???  SAPBEX.XLA ?

    Hi Experts, I am trying to code again in VBA for my workbook.  I have got a piece of code which is for a push button.  Everytime I refresh the query in the workbook, the whole thing crashes.   Although, what I am confused is, everytime I click on SAP

  • Freeciv 2.1.0 && networkmanager 0.7

    Do I need to say more? Freeciv 2.1.0 has huge update ready find it's way to the repos. Read/learn more here: http://www.linux-gamers.net/modules/new - oryid=2320 And networkmanager 0.7 has been released. Read/learn more here: http://blogs.gnome.org/d