Can eprint be set to default ENABLED

Photosmart Printer 75510 on XP. Efax is always available, but requires eprint to be enabled first. Does eprint have to be enabled every time I turn the printer on? Can it be set to default ON? Thanks.
This question was solved.
View Solution.

It seems like you may be having trouble with your 7515 staying connected with Web Services. You can remedy this by setting a static IP and changing some DNS settings:
1. Press the "Wireless" icon on the front panel of your printer. Make note of the IP address.
2. Open a web browser on your PC and in the address bar clear everything out and type in the IP address from the printer and hit the enter key. This will open the EWS (embedded web server) for the printer.
3. Click the "Network" tab at the top of the page.
4. On the left side of the page under Wireless (802.11) click on "Networking," then click on "Network Address(IP)."
5. Change the IP selection from Automatic to Manual, and then click the "Suggest a Manual IP Address" button. Make note of what the new IP Address is, you will need this in step 8.
6. Below those fields you will see fields for DNS settings. You will need to fill those in as follows:
Manual Preferred DNS Server: 8.8.8.8
Manual Alternate DNS Server: 8.8.4.4
7. Click the "Apply" button. Once this is finished processing you may see a Warning message that says you may lose connection, and a message that says click the "OK" button to go back. Don't click the OK, button just close the page.
8. Now open a new browser window and enter the IP Address that you noted in step 5 in the address bar and press the enter key. If it opened the printer EWS page the settings were accepted successfully. You can close that browser page now.
9. Power cycle the printer by turning it off, disconnecting the power cord from the rear of the printer, wait 30 seconds, plug the printer back in and turn it back on.
10. Make sure that ePrint is on. It should stay enabled after this.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say Thanks
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

With recent update of Firefox, I can no longer set the default page, it always reverts back to the Mozilla page, why?

Why can I no longer set the default page to something else? Every time I open Mozilla Firefox, it always reverts back to the Mozilla page. No matter how many times I do this, it always reverts.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Why can't I set a default calendar on my iPad?

On my iPhone, I can set a default calendar under the "Mail..." utility option, but this is NOT an option on my iPad. Is this just an oversight on Apple's part or am I overlooking the setting elsewhere on my iPad?

I see the setting in Settings/Mail, Contacts, Calendars/Calendars, at the bottom of the page.

Find by Name can't be set as default?

When I hit command+F I get the Find window but it always defaults to Find By Content.
Can I make it default to Find By Name? From the search I did here in the forums there is no way but I thouht to ask again.
Thanks in advance

While there isn't a thing you can do about the toolbar default, you CAN render it irrelevant. If you bring up the Find window using the shortcut of Command-Shift-F, then you will get "Name:Contains" with the cursor blinking in the blank entry field. Type the file name you want to find, and the results will be files whose actual file name contains whatever you typed. Furthermore, if you don't want to be bothered by using the shift key, you can go to System Prefs->Keyboard&Mouse->Shortcuts and reverse the two shortcuts, so that "Find..." with the "Kind" nonsense becomes Command-Shift-F, and "Find by Name..." is a simple Command-F. Restart the Finder after you make your changes, and then whenever you do Command-F you will get a search box with "Name:Contains" and the cursor blinking in the field for you to just type your search word-- the results will be files containing your word in their NAME, not the content.
There still ain't a dang thing you can do about the default of searching "This Mac" rather than the folder you were in when you invoked the search. Which is idiotic.
You may want to take a look at the article I wrote on Spotlight:
http://www.pinkmutant.com/articles/Leopard/leospot.html
Be sure to click the link to see the expanded page of illustrations.
Francine
Francine
Schwieder

Can Siri be set to default to Work or Mobile

I was making a call yesterday to BOB Work and Siri asked if I want to make it the default. I said yes and now I only have to say call BOB. How do I make it do that for the rest of my contacts.

It seems like you may be having trouble with your 7515 staying connected with Web Services. You can remedy this by setting a static IP and changing some DNS settings:
1. Press the "Wireless" icon on the front panel of your printer. Make note of the IP address.
2. Open a web browser on your PC and in the address bar clear everything out and type in the IP address from the printer and hit the enter key. This will open the EWS (embedded web server) for the printer.
3. Click the "Network" tab at the top of the page.
4. On the left side of the page under Wireless (802.11) click on "Networking," then click on "Network Address(IP)."
5. Change the IP selection from Automatic to Manual, and then click the "Suggest a Manual IP Address" button. Make note of what the new IP Address is, you will need this in step 8.
6. Below those fields you will see fields for DNS settings. You will need to fill those in as follows:
Manual Preferred DNS Server: 8.8.8.8
Manual Alternate DNS Server: 8.8.4.4
7. Click the "Apply" button. Once this is finished processing you may see a Warning message that says you may lose connection, and a message that says click the "OK" button to go back. Don't click the OK, button just close the page.
8. Now open a new browser window and enter the IP Address that you noted in step 5 in the address bar and press the enter key. If it opened the printer EWS page the settings were accepted successfully. You can close that browser page now.
9. Power cycle the printer by turning it off, disconnecting the power cord from the rear of the printer, wait 30 seconds, plug the printer back in and turn it back on.
10. Make sure that ePrint is on. It should stay enabled after this.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say Thanks
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can no longer set non-default device with QT 7

In Quicktime 6, I could choose a specific device to play through. I use this feature to play iTunes through a second soundcard and out to my stereo. I leave my default device set to the system soundcard where I have just headphones hooked up. This way no system beeps or sounds come through the stereo.
Now with Quicktime 7, I can no longer do this. Can anyone suggest a workaround? Why on earth would Apple remove this feature that was working before?

Is there an answer to this dilemma yet? I run an htpc with multiple sound cards, and I definitely need to get this working. I hate to have to go back down to a previous version, if that is possible. Thanks.

HT1277 How can I re-set the default account in Mac Mail?

I have two email accunts feeding into Mac Mail. I want the system to default send from Account A, but it always defaults to Account B. Thanks!

You should see this:
at the bottom of your repy to yourself. No?

When using email via iCloud, when I try to reply to emails, the cursor defaults to the bottom of the chain. How can it be set to default to the top?

PDF reader will not open certain documents. I have to download to desktop and open PDF documents there. No similar problem if using Safari. Already loaded PDF plugin for Firefox. Any guesses?

Also, This is the message I receive when the page doesn't open:
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

Setting a Default Session

It appears that while you can create a customized work space in Audition CS5.5 you can no longer set a default session. In 3.0 I was able to create a session with a custom number of tracks, set effects on tracks and save that as a default session so that I would not have to set my session up the same way every time (which is helpful to me be in a voice track only environment). Am I missing something, or is this no longer a feature? It also appear that you can no longer set the default view of the workspace as it related to minutes (it shows 30 seconds by default). Attempting to set the View/End setting to, say, 1 minute is not possible.

Hello,
I'm confused by this as well. Really no way to save a template /default session? Why would Adobe remove such a vital feature?

Where can I change Firefox 4 default setting for proxy servers

I am working on setting up firefox 4 in a multi user environment in linux. In FF 3.x releases, I could go to greprefs/all.js area and make the changes in the all.js file to chagne settings globally. But, I could not find any such file for firefox 4.x installation (for linux).
Would you please advise where can I go about editing global setting in Firefox 4?
thanks.

Maybe it works if you create file and place a files with the prefs in the defaults/pref folder.
You can use a mozilla.cfg file to lock prefs or specify default values.<br />
You can place a file local-settings.js in the defaults\pref folder to specify using mozilla.cfg.
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
To prevent users from installing software use:
lockPref("xpinstall.enabled" ,false);
See:
* http://kb.mozillazine.org/Locking_preferences

Can I set the default save location in text edit to dropbox?

I'm happy with dropbox for now and want to set the default save folder to a dropbox folder but I cannot see how to do this.
Can it be done? Or do I need a 3 party text editor?
Thanks
Tom

You cannot. Because this option both takes much longer and reduces the quality of files, it has to be chosen specifically.
In any case, when you save a PDF file from Word. this process does not involve Acrobat or Adobe software in any way.

Can I over-ride the default setting in Organizer to allow sorting photos by filename ?

I am converting slides from the 1970's and 80's to digital files and using PSE 8 to Organize them but it is important to me that they stay in the order of the file name I give them and NOT "Date: newest first or last" because it would seem that PSE, in the absence of metafile information, uses the date and time I uploaded the file to the Organizer as the "Date:". ACDSee has a much more sensible arrangement in giving me full control of how my photos are sorted. I am being driven to using ACDSee as the organizer and PSE as the photo editor, a not very convenient arrangement. So my question is, "Can I over-ride the default setting in Organizer to allow sorting photos by filename ?"

The type of file system that you're trying to set up, is actually done better by creating you own file heirarchy in Windows, and then viewing by import batch. For example; you might create a top level folder "My Slide Scans", then perhaps, "My son John". So, the scans of john all go in the same folder, you import the folder in one batch, and you're where you want to be.
That said, PSE will fight you at every turn to do this, since with the scanner hooked up with PSE, PSE is going to want to store your photos in "scanned photos" and import them as you scan them.
I woud suggest this. After the scan and import, use PSE to move the photos to their final destination folder, say " Hawaii 1994", and create a tag of the same name". Then when you're done scanning photos of this event, use the tag to view all the scans at once. Then, delete all the photos from the organizer. (Yeah, sounds radical I know). Take heart! All you've gotta do then is to reimport the whole folder. All the same name photos will be in one import batch. And with all the photos of any given topic in one folder, you'll be able to also use Windows Explorer in any number of modes to view the photos outside PSE.
Keep in mind you can rename batchs of photos by selecting them, or by import batch or even tag, then "Ctrl. > Shift > N" will bring up the name change dialog box.
This technique is quite contensious, but, it makes a whole lot more sense than storing all your photos in the "My Photos" folder on the "C:/" drive where any viral or malware hiccup might cause the necessity of a reformat, which could cause the loss of years of work.
If a name search is a priority, that would be "Ctrl ."Shift" > "K" then type in whatever your heart desires.
Caution: Before attempting a delete/ reimport manuver, Alway, always, write the tag and file info to the photo. "File" >"Write Tag and Properties Info to File".
I always am quite adamantine about suggesting that you do NOT use the same physical HDD that contains Windows to store your photos, that's just asking for trouble. HDDs are quite cheap nowadays, and they're worth every penny in piece of mind. Plus to use a storage ("Volume") drive, you have to create your own file heirarchy anyway, so that leads right back to the beginning of this discussion.

How can I set a default zoom for the browser (freeze it)?

Hello, there's an option of using the Ctrl + + to zoom the Web page, but it reverts to the Firefox default zoom in the midst which is very annoying. Generally, I'd like to be able to set a certain default zoom level and then only if needed use the CTRL +/- zoom in and out options. So my optimal zoom level is used for all my browsing unless I change it.

I have listed 2 add-ons below for you to consider. I have not used NoSquint, but I use and rely on Default FullZoom Level.
*You can set a default zoom level in DFZL Options
*You can use the mouse scroll wheel on the Add-on Bar DFZL icon to increase or decrease the zoom or click the icon and choose from the available zoom percentages.
*In NoSquint, it says it saves the zoom level by web site/page.
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
You can also set a "Minimum Font Size" in Firefox Options > Content > Fonts & Colors Advanced".
*See --> [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Content%20panel#w_fonts-colors Options window-Content panel-Fonts & Colors]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can I set a default save file for scans using the Solution Center?

Using Windows 7 - 64 bit. HP Photosmart Premuim C-309a All-In-One Printer.
Because of a Windows crash, I had to install a new drive and reload Windows. I also reloaded other software like the HP Solution Center & Drivers. My problem is that I can't find how to set a default folder for my scans. This is NOT mentioned in the user manual but it was originally accomplished by HP Tech Support when the printer was new. Can anyone relate how to set default folders for my scans?
Thanks.
Tango
This question was solved.
View Solution.

Here is a document on how to scan through Windows 7.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03476857
Click either solution center or the icon of the printer on your desktop. Here select "Scanner Actions" (or the analogous selection). When the window pops up from the HP software it should provide you with options for file type (.tiff, .pdf, .jpg) as well as resolution and media size. Here on this page there is also an option for you to go to the advanced options. Using this you can alter the default safe folder.
Let me know if that helps you out!

Can eprint be set to default ENABLED

Similar Messages

Maybe you are looking for