Can EXCHANGE 2010 USE default app pool - v4?

Hi guys.
I had a problem on Exchange 2010 SP3 with latest cumulative update that I needed to change Default App Pool from 4 to 2.
I don't know what caused changing those numbers to 4, but I'm curious is there any official statement about it, that it should have number 2 and not 4?
Because if I look in this address:
http://technet.microsoft.com/en-us/library/ff728623.aspx
under Microsoft .NET Framework I see table where it's written that
.NET Framework 4.5
is supported in
Exchange 2010 SP3
so I'm a little bit confused/amused.
bostjanc

Hi,
What version of IIS are you using?
I find a related information about Default App Pool for your reference:
http://www.iis.net/configreference/system.applicationhost/applicationpools/applicationpooldefaults
Version
Notes
IIS 8.0
Another value ("v4.0") was added to the
managedRuntimeVersion attribute in IIS 8.0, and its default value was changed to "" instead of "v2.0".
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

Who has full access on all mailboxes in Exchange 2010 using Powershell ?

Greetings,
Could you please tell me how can i know Who has full access on all mailboxes in Exchange 2010 using Powershell ?
Thanks.
Redouane SARRA

This is going to depend greatly on WHICH inherited permissions you plan to delete - there are some that you can never delete if you want the system to function properly. Now, that being said, let's look at some example permissions. First, here
are some permissions on a standard mailbox:
Identity             User                 AccessRights
IsInherited Deny
users.corp.... USERS\btwatcher    {FullAccess}
False       False
users.corp.... USERS\svcactAdmin {FullAccess}
True        False
users.corp.... CORP\Domain Ad... {FullAccess}
True        True
users.corp.... CORP\Enterpris... {FullAccess}
True        True
users.corp.... CORP\Organizat... {FullAccess}
True        True
users.corp.... CORP\adminact    {FullAccess}
True        True
users.corp.... CORP\esswin       {FullAccess}
True        True
users.corp.... USERS\svcactEncase {FullAccess}
True        False
users.corp.... CORP\Exchange ... {FullAccess}
True        False
users.corp.... NT AUTHORITY\SYSTEM {FullAccess}
True        False
As you can see, the first is not inherited. All others are, and two are from service accounts (svcact...). Also, some are Exchange system permissions, some are denies, and some are just administrative accounts. Once you determine which
you wish to remove, the SIMPLEST way to set the permissions you want is to open the account properties in ADSIEdit, and go to the Security tab. Here, click the Advanced button and find the inherited permission you wish to remove. ADSIEdit will
show where the permission is inherited from - you will need to go to that container to remove the inherited permission. You can also grant inherited denies at the same level(s).
Now, something you will need to understand is that if you hope to remove permissions granted to domain administrators, the system will replace them - these permissions are required by the system and can't be modified permanently.

TS1702 after upgrading to ios 6 i can no longer use the app store.

after upgrading to ios 6 i can no longer use the app store on my iPhone, i am unable to install new apps. i chose to fill out the security questions and the problem seems to occur since then. what could be a solution to get the app store working again??

i just contacted apple support and the solution is the following!!!!!
connect the iphone to your computer and open itunes
then click on itunes store at the left side of the screen
then click at the right top side of your itunes screen on your email address (or id that is displayed there in the black bar)
choose log out
then go to the top of the screen with the search option in itunes where you can search in the store and choose an app that you have not yet installed.
then you get the security questions also in itunes, fill the them out and after you have done that you are asked to log in again
now when you install an app that works (it is then on your computer still)
open the app store on your iphone and choose the updates button and install the app from the cloud
now when you install new apps also from the app store on your iphone it works again!!! and you are no longer asked about the security questions
(the other option they told me (that i did not have to use) is: go to settings/general/ all the way at the bottom of the screen choose make new settings restore networksettings and choose yes)

PDF SCANS ERROR MESSAGE: CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

OFFICEJET PRO 8600 PLUS , WIN 7, SCAN TO COMPUTER AS A PDF FILE. ERROR MESSAGE: "
CAN'T "OPEN THE DEFAULT APP FOR THIS FILE TYPE" EG. PDF

Hi @reddog2,
I would contact HP Cloud Services for assistance. Call 1-855-785-2777.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Create web application in powershell using existing app pool

Hi all,
I am trying to create a web application with this script:
https://gallery.technet.microsoft.com/office/Create-SharePoint-2013-1d7c3337
The problem is that I want to use an existing app pool, but when I do I get this error:
Aborting: Application Pool SharePoint - Applications already exists on the server and is not a SharePoint Application Pool
Obviously this is wrong, since I use this app pool for most of my web apps.
So how does one go about creating a web app in powershell with an already existing app pool?
-Michael
mic

try these links:
http://sharepoint.stackexchange.com/questions/81297/creating-a-webapp-via-powershell-is-mapping-the-site-to-wrong-apppool
http://blogs.technet.com/b/fromthefield/archive/2014/03/26/create-a-sharepoint-application-pool-using-powershell.aspx
http://blogs.msdn.com/b/rcormier/archive/2012/09/01/how-to-create-sharepoint-web-applications-with-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

I don't know why can't i use manycam app in Skype?

i don't know why can't i use manycam app in Skype?
i need a help to use it!
Thank you

Hi,
Does the ManyCam option appear in other apps ?
Messages for instance or Photo Booth ?
In Messages you will have to go to the Preferences > Video section and the camera drop down (below the pic)
In Photo Booth there are no Preferences as such and you use the Camera Menu. (when you have two cameras)
One reason for not seeing the Many Cam is you have not restarted the computer since installing it.
9:49 pm Monday; September 8, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I have a Creative Cloud License for "Creative Cloud Student and Teacher Edition". Can my daughter use an App on a separate computer? If not, can I purchase a second license? Thank you.

I have a Creative Cloud License for "Creative Cloud Student and Teacher Edition". Can my daughter use an App on a separate computer?
If not, can I purchase a second license?
Thank you.

The license allows YOU to install on a 2nd computer... it does not allow someone else to use your license
Licenses and terms of use | Adobe
You may also not purchase an Education version for someone, they must do that for themself... if they qualify
Adobe Education... Start here https://creative.adobe.com/join/edu
Education Plan https://creative.adobe.com/plans?plan=edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html
I do not know how it is done, but you MAY be able to buy her a regular subscription and pay with your credit card... just not the Education version that has strict requirements

Can anyone suggest useful software apps to have installed on my macBook to use with my 4th grade special education students?

Can anyone suggest useful software apps to have installed on my macBook to use with my 4th grade special education students?

Apps to do what with??
Good place to look for software:
http://www.macupdate.com/
And for free alternatives to some popular software packages:
http://alternativeto.net/
(If you see an ad there for something called MacKeeper, ignore it and on no account install it - it is malware.)
And there is of course also the App Store!

Can i anyhow use the app 'fring' on my macbook pro?its an social networking app for iPad,iPhone and iPod..

can i anyhow use the app 'fring' on my macbook pro?its an social networking app for iPad,iPhone and iPod..

Unless there is a specific Mac OS X version you won't be able to run it on your computer.

Does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

does it mandatory to use Delta/WYE 3phase PDU for CRS1 8 slot deployment? Can we just use default single phase AC power-shelves?

The fixed power supplies (legacy / zone based system) require 3-phase AC-Delta/WYE.
The modular power supplies do not use a zone based system and require a single phase. You can order a CRS PDU to convert 3-phase AC input (from power source) to single-phase AC input for the power shelf.
HTH,
Sam

TextEdit problems: causes spinning ball/freezes, can't make it default app

I'm having some serious problems with, of all things, TextEdit. On an iMac running 10.4.11 with TextEdit v. 1.4 (the standard version for Tiger), I've been having the following two major issues:
1. About once per day, or at least once every two days, for absolutely no perceivable reason, while typing in TextEdit, I get the "spinning beach ball"; the same pattern happens every time: I wait about 6 minutes for the beach ball to stop spinning, then I try to "save" my open document; this causes another six-minute spin/wait, after which it saves. Then I try to "Quit" Textedit, and after another six-minute spin, it finally quits. Then, any successive action on my part -- clicking an application icon in the dock, or doing command-option-escape to force quit things, or basically anything at all, causes the spinning ball to return, and this time it will not go away. I've waited as long as two hours, and it just keeps spinning. Command-option-escape does nothing -- no response. Nor does command-period, or anything I could think of. The only way out of the freeze is to press the power button and turn off the computer. Terrible!
This ONLY happens when I am working in TextEdit -- no other application causes the problem. And it only happens when I have an unsaved TextEdit document topmost on the screen. It has happened at least 30 times now, consistently, so it's not a one-time glitch. It has even happened when TextEdit was the ONLY application running -- so it couldn't be another application causing the problem. I had thought that "Classic" was causing the problem, because I often have Classic running to use a legacy OS9 application, but even when I restarted the computer and did not ever launch Classic, I still got the TextEdit-freeze problem.
2. None of my TextEdit documents have TextEdit as their default launch application. Yes, I know about single-clicking the file, pressing "command-I" and in the Info box changing the "Open With" application to "TextEdit," and also then clicking on "change all" so that all similar files are opened with the same application. When I attempt this, it apparently makes the change, but in fact nothing happens: even after making the change, double-clicking the files does not launch TextEdit. In fact, it launches nothing at all, because when I check command-I again, the launch application has reverted to either "None", or to something mysterious called "ams1108.html", which not only is not an application, but it doesn't even exist on my computer (I searched for it).
HOWEVER, if TextEdit is already running, then when I double-click on any of my text documents, they will then open in TextEdit. But if TextEdit is not currently running, they won't open in it.
This applies to any file that has a visible or hidden "txt" or "rtf" or other normal TextEdit-compatible extension. Basically, any text file.
What is going on? I thought TextEdit was the most stable, most reliable application in all of Apple-dom. And I've been using it for years and years, but this problem has only recently started in the past couple months. I have no memory of making any changes to my computer that could have precipitated the change. Also: are these two problems related to each other?
I really don't know what to do. Any suggestions for fixing this problem would be appreciated. (And no, I don't have the original 10.4 install disks, so I can't re-install TextEdit, unless it can be downloaded somewhere). Thanks.

OK, Carolyn, I wrote down all my prefs (glad I did), trashed the prefs file, restarted, relaunched TextEdit, reset all my preferences to my liking (which had reverted to default settings), quit TextEdit. Then I tried double-clicking some text files -- and the same problem (#2 above) persists. None of my TextEdit or text files have TextEdit as the default launch application -- they're still all either "None" or "ams1108.html". And, as before, if I try to change it to "TextEdit" in the file's info box, then click on "change all," it does not work: not only does it not change all the text files to be TextEdit, but clicking "change all" will cause the file in question to revert to "None" or "ams1108.html". However, if I only change the default app for that one file to TextEdit, and don't click "change all," then it will stick -- for now at least. (Though I wouldn't be surprised if after a restart they all changed back to "None.")
The short assessment is: trashing the prefs did NOT fix problem #2 above. It may or may not have fixed problem #1 -- hard to tell immediately, since the only way to find out is the use TextEdit for two days.
So, setting aside problem #1 for now: any suggestions for fixing problem #2 (default app can't be changed to TextEdit by clicking "change all")? I have thousands and thousands of TextEdit files I use, so changing them all manually one-by-one isn't feasible. Thanks.

Mac OSX mavericks - can't change the default app for InDesign

I have a problem that the InDesign CS6 stubbornly changes back the default file-type association for the .indd and .indb file types.
I tried to change it via Get Info - then it immediately changes back to InDesign CS6. Also tried with RC default App, but it forgets my setting immediately when I make them for InDesign CS5, and for CS6 it doesn't allow that I make it.
The only way that it works, is if I put the InDesign CS6 folder to Trash, and then change the file-type association - but then only until I start again InDesign CS6 which changes back all the file-type associations.
My workflow is like that, that I'm working on many projects, and my main clients use CS5, but some use CS6 - so I need both of them, but that CS5 is the main program. How can I fix this problem?
I am on latest Mac OS X 10.9.1
THanks, Gas

Edit: Disregard. It worked for some text/ files but not video/x-... So I guess I still have the same problem.
The same thing happened to me.
I deleted (probably safer to first rename)
~/.local/share/applications/mimeapps.list
Then I ran
kbuildsycoca4 --noincremental
I'm not sure if the first step was necessary, but it worked for me.
Last edited by adrianx (2013-08-21 22:06:47)

How can I reset all defaults app associated to file type?

I recently used the "Info" command to associate all ".eps" files to open with Photoshop. This caused my Illustrator EPS files to also open with Photoshop. How can I revert to the original finder settings so I can have the defaults apps like before?

Please do the following. 
#Click '''Help '''| '''Restart with Add-ons disabled'''. 
#In the menu which appears, checkmark the option called "'''Reset all user preferences to Firefox defaults'''" 
#Click the button called "'''Make Changes and Restart'''". 
After Firefox restarts, please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. Outdated plugins expose your system to security vulnerabilities.

Why can't I use my apps when my membership doesn't expire for another 8 days???

My membership doesn't expire until the 20th. Why can't I access my apps now??? How can I speak to someone at support??

Hi helen xia,
Which OS are you using? Please let us know the exact error message.
Regards,
Romit Sinha

I can't find/use an app and now i want uninstall it

Well because it takes up space and if I don't make use of it and it doesn't benefit me in anyway I would want it gone. Wouldn't you?

So for some time now I've got Pin Interest installed. But to this day I haven't accessed the app because it doesn't appear on my apps. Whenever I check the store for Pin Interest it always says I have the app installed. Did it magically disappear or does my phone have a bug, I haven't a clue. So now I want it removed because I can't even use it but I don't know how to. Please please respond immediately. Thank you and kudos!

Can EXCHANGE 2010 USE default app pool - v4?

Similar Messages

Maybe you are looking for