Can Express 9 play and record multiple instruments at the same time?

I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

Hi,
to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
All other existing tracks should playback while recording.
Fox

Similar Messages

  • Can you play two different MIDI instruments at the same time in Garageband?

    Hi all,
    I searched for a while but failed to find an answer so far: can Garageband allow you to play two tracks with two different midi instruments? When I plug my two keyboards, the 2 MIDI sources are recognized, but can only play notes on one track, not two different tracks! Is this a known limitation?
    If Garageband can't play 2 midi instruments on 2 different tracks, I guess that leaves me with Logic Express...
    Thanks a lot for any reply!
    Alex

    Correct. GB doesn't differentiate between midi channels, that's why you can't split them to two tracks (and GB only offers one recording channel for midi at a time).

  • How can I get rid of multiple pictures at the same time?

    how can I get rid of multiple pictures at the same time?

    Adobe Bridge, lightroom and your file browser (windows explorer or Mac Finder) can select multiple pictures at once and then delete. If you are looking for more than that for information, you will need to be more specific at what your doing, what OS you have, and version of software your using. If necessary post screen shots so we can see what your doing. The more information we have the more detailed of an explaination can can give back to you.

  • If you buy a film from itunes, can you watch it on multiple iPads at the same time?

    if you buy a film from itunes, can you watch it on multiple iPads at the same time?

    SerZak is correct. There is a ten device limit. Yoy would still have to be signed into the correct ID in order to sync the Movie, even if you do not use Automatic Downloads, so the 10 device limit would still apply.
    Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also beauthorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
    http://support.apple.com/kb/ht4627

  • Can a vodcast and a photocast run at the same time ?.

    Hi,
    I would like have a video podcast play and a photocast run at the same time is this feasible?
    Geoff

    Since they're different apps and there's no way to sync something like that: no. Sounds like you could just do a video slideshow to me. That's supported by all major video creation apps.
    -S

  • Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

    I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

    Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

  • Can I save and open an attachemnt at the same time?

    I want to be able to open an email with an attachement or attachments and click on the save button for the attachment(s), designate the location (folder) where they are to be saved - but also tell Mail to save the attachments then open them up on the desktop. Two operations in one. If you understand my request you understand what you have to do now - two separate steps. Save. Then find the saved files and open them.
    OR
    Open the attachment from the email which then downloads the file to your designated "all-purpose" location (not the ultimate location you'd want to save it). Then once you've seen it, you do the save thing with the original mail attachment and then have to go back and delete the file from the designated all-purpose download location.
    This latter problem of having to delete unedited downloads manually could be solved with an option in Mail preferences to automatically delete unedited downloads in the "all-purpose" location after that same attachment had been downloaded to another specific location on your hard drive. This option for deleting unedited downloads does not exist, however.
    But even if this step-saver option existed in the preferences, you still would not be able to tell your Mac to save a particular Mail email attachment to a particular folder AND open that attachment at the same time in one command.
    That's what I want.
    Maybe I want both. Save and open together plus the ability to automatically delete unedited attachment downloads in the "all-purpose" download file after the same attachment has been downloaded to another specific location on your hard drive.

    with IOS 6 yes you will be able to do that

  • Can a single AE receive and deliver multiple signals at the same time?

    I've looked through the forums and the AE pdf manual and have not been able to find a definitive answer so far.
    We have a (all Apple) cafe in a remote location with no Apple support and we presently operate wireless music and wireless internet for customer use from one iMac and one AE. The iMac is also our cashier station. We have another iMac for customers who don't have their own laptops. The iMacs switch to screensaver displays promoting the cafe when not in use.
    Our wired TV monitors that are currently not associated with our AE display either satellite TV, cable TV or from DVD player using a manually switched hub with the three separate receivers wired to the hub.
    We want to add streaming TV from the internet to the TV monitors so we will have four sources. I am looking at connecting this internet streaming TV source to the TVs via AE hence I want to also allow the other TV sources to operate via AE. If possible, we would also like to switch in the screensaver from one iMac on a timed basis (or using Apple remote to one iMac) if there is nothing else of particular interest on the TVs.
    The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?

    The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?
    The AirPort Extreme base station (AEBS) does not have a TV or video output.
    The AEBS, just like any other router, supports multiple clients simultaneously. Of course there is always bandwidth limitations for any device. So in theory the AEBS can support all of that. In reality the performance of each service will depend on the bandwidth used by each and the bandwidth available. This is no different than any router.

  • Advancing and Zooming multiple images at the same time.

    Hi All,
    I have requested this feature since early Lightroom beta 1, so I'm trying again.
    Example: I have multiple images opened up in 'Survey' mode, let's say 3 or 4 mages. Which on my Apple 23' Cinema Display makes for much nicer size reviewing, than the largest 'Thumbnail' setting.
    The basic ability to hit a combo-keystroke, and advance all the frames at once in 'Survey' mode, to the next set of images of that same total. You know, same as 'page up' or 'page down' in the thumbnail view in the Grid. Also, to zoom all of them at the same time.
    Now, I know IiView Media Pro could do this several years ago, before Microsoft turned it into 'Expressions Media', with 4 images at a time. And like I said, I've been requesting it since early LR beta 1. You know, just add a 'Shift' to the Page Up/Down function keys. Or 'Option' or "Control' key.
    I love the Survey mode, but surely we can have up to four, or even a half-dozen images, advance at the same time, instead of adding or subtracting one image at a time. As it currently does.
    Thanks,
    -Sol

    Based on the frequency with which this trips up users, the Aperture team is going to have to add a much stronger visual indication that "Primary Only" is active.  Marching ants, anyone?  Or a pink selection marquee?
    At least in the Viewer when multiple Images are selected the thin white selection marquee is dropped when Primary Only is active.  There is no such change in the Browser.

  • Can B1 2005 and 2007 be run at the same time?

    I want to install B1 2007 on my server to make sure that everything runs over smoothly, then when I'm satisfied with the results, I'll just upgrade my workstations and hopefully have a seamless transition.  Are there any errors that will pop up if I install 2007 at the same time as 2005?  I have to make sure that there isn't a work outage.

    Derek,
    if you mean both version to sql server, the answer is yes, you can. If you mean to install the aplication, the answer is no, you cannot. If you want to test new version, youll have to use new computer or some virtual PC.
    Petr

  • Can RMAN backup and export datapump executed at the same time?

    Hello,
    I have several databases that I backup using RMAN and export datapump everynight starting at 6PM and end at Midnight. The backup maintenance window doesn't give me enough time for each database to run at different time. I am using crontab to schedule my backups. Since I have so many databases that need to be backed up between 6PM - Midnight, some of the export and RMAN backup scripts will execute almost at the same time. My question is can my export data pump and RMAN backup scripts run at the same time?
    Thank you in advance.
    John

    Needs must. If you don't run expdp parallel then it doesn't use that much. If it was really killing the system then look into setting up a Resource plan that knocks that user down but this is a big step.
    I woud better look into using Rman
    system incrementals, and block change tracking, to minimize your RMAN time.
    Regards
    If your shop needs to do both simultaneously then go for it.
    Chris.
    PS : One of my shops has maybe 20-30 rmans and pumps all kicking off some simultaneous, some not, from 0000 to 0130. No complaints from users and no problems either. Go for it.
    Edited by: Chris Slattery on Nov 25, 2012 11:19 PM

  • Can an Apple TV support multiple PC at the same time?

    My boss and I were wondering if an Apple TV could help us in a specific situation.
    Let's say we are having a meeting and we are 3 in the room.  Alternatively, each of us will have to present some slides / share our PC Screen.  Today, we have to unplug the VGA/HDMI cable, and pass it to the other.  This is non value added.
    The 3 of us are running Dell PC's with Windows 7 & XP, and we were wondering if we had an Apple TV device, could the 3 us be able to share/mirror our screen, and (with the remote or and app), switch from one screen to the other ?

    Hi
    So basically, we get the Apple TV2, connect it to our Flat Screen, then we would have to install "Airparrot" on all PC that would need to mirror its screen on the Flat Screen.
    As for connecting and disconnecting, how does this work?  Every PC is having like a"control" panel where you can disconnect/connect or you do this using the remote?
    About if Xbox allows this, I'm not aware, but not sure who we could "justifying" getting an Xbox for the office, where as an AppleTV would make more sense
    Thanks

  • Can PSE 6 and PSE 8 Run at the Same Time?

    I have Windows 7 and recently upgraded to PSE 8 and have had problems with Photo Mail and email attachments. I did not have email attachment problems with PSE 6 so I wonder if I can run both 6 and 8. Will there be a catalog problem? When I loaded PSE 8 the first time the catalog needed to be converted. Will this make it unstable for PSE 6?

    As requested.

  • OSS doesn't play more than 1 sound at the same time [SOLVED]

    Hello,
    I use OSS to replace ALSA, it used to work properly here. Today I noticed that I can't play more than one sound at the same time, something which I used to be able to do.
    Also, ossxmix doesn't operate properly (I can't control the volume of a specific program).
    Looks like a permissions issue, because /dev/dsp and /dev/oss are created as root and other users get Permission Denied.
    Any ideas how to fix it? My sound card is an AC'97 onboard.
    Thanks!
    EDIT: Solved by pacman -R oss, rm -rf /usr/lib/oss then pacman -S oss. Seems to have worked.
    Last edited by Renan Birck (2009-01-02 23:06:35)

    Hello Angela,
    Have you tried resetting the iPod yet to see if that makes a difference?  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    If that doesn't work, a restore of the iPod via iTunes may be in order.
    B-rock

  • Help with recording 2 tracks at the same time

    Basically I recently purchased an Audio Interface (BEHRINGER XENYX Q802 USB) and I'm having trouble recording multiple tracks at the same time while using it.
    When I set up 2 MONO tracks in my DAW (one using input 1, the other using input 2) all that happens is that I get a recording of one mic over both tracks in my DAW.
    This is probably a beginner post and I have looked it up on YouTube etc. but it just doesn't work for me... Maybe it has something to do with my Interface, but any help will be much appreciated.

    Hi Pancenter,
    Unfortunately I don't have the manual as I purchased it from a friend who failed to provide me with the Manual.
    But thank you for answering as this was what I needed to do.
    Many thanks
    Olie.

Maybe you are looking for

  • Context menu00FA and hierarchy problem

    Gurus...  I have a problem when I make the filter for a page Web, I execute the page with /sap/bw/BEx?sap-language=ES&bsplanguage=ES&CMD=LDOC&TEMPLATE_ID=ZADWEB0201, and there is no problem to me, this page contains query with hierarchy, but when the

  • Import and Export ODF documents in iWork

    How can one import/export ODF documents into/from iWork applications?

  • LabVIEW 8.6.1 did not fix glaring Mixed Signal Graph bug :(

    I'm pretty dissapointed that NI has JUST NOW released 8.6.1 (more than 6-months after releasing the buggiest LabVIEW version, ever).  The Mixed Signal Graph bug still exists and is very annoying.  The visual bug occures when you add more than 1 plot

  • IPhoto crashes 100% when I attempt to create new album

    iPhoto 9.2.1, Lion 10.7.2 iMac 2.8 GHz Intel Core i5 Whether I give the New Album command in the File menu or use the Create button to make a new album, the program immediately crashes. Here are the exception type/codes the report shows: Exception Ty

  • Mac cannot connect to Canon MF4800 Printer

    I recently purchased a 13" MacBook Pro and attempted to print on a Canon MF4800 printer.  The Mac recognizes the wireless printer and then printing progress is saying printer not responding. The below is the details on the printer. CanonMF4800:   Sta