¿Can Extended and Ethertype (input) ACLs be applied to the same interface?
Hello team:
¿ Is it possible to apply one Extended ACL and one Ethertype ACL, in input mode, to the same interface?
Thank you very much in advance.
Mariela Musitani
Thank you very much Borys. I assumed that it was possible, but the documentation was not clear in this context.
regards, Mariela
Similar Messages
-
Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.
Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google. -
Stetting up FTP and SFTP adapters for the same interface
Experts-
I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
Please send me any suggestions which would resolve my problemHi Hari,
As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use SFTP for the secure transfer.
Best Regards
Srinivas -
how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........
Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all! -
I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to. -
How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?
How can I record an Audio Instrument, and listen to a reference track at the same time?
Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs. -
MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?
Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204
2. Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply”. -
Can multiple HTTP redirects be applied to the same VIP
Greetings all,
My customer would like to have two redirects to be applied to the same VIP.
Example:
VIP configured name is https://test.company.com
redirect the following:
http://site1.company.com to https://test.company.com
http://site2.company.com to https://test.company.com
I have applied the redirect of 80 to 443 to many VIPs (one for one), but I have not applied one, where two URL redirects go the same VIP.
Hope my question makes sense, and I will be glad to provide additional info.
Thanks,
ramanHi Raman,
There can be only one redirect server with one webhost redirection and hence there cannot be two redirect URL's. I don't think this can be achieved. Best idea would be for the server to issue redirects.
Regards,
Kanwal -
I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards
Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as. -
How do I transfer my bookmarks from one computer to another? I have Firefox Home on my phone and I can get them there, but I want to have the same bookmarks on my home computer as I do on my work computer. If I have a user name then where do I sign into Firefox, it should be that easy but I can't seem to figure it out.
Hey susanneyes,
Sounds like you want to set up Firefox Sync. This will allow you to keep all of your instances of Firefox synchronized. Just follow the steps in [https://support.mozilla.com/en-US/kb/what-firefox-sync?s=sync&r=0&as=s this article] and you'll be set.
Hopefully this helps! -
I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID and accound now my husband can see all the text I send and I get everything he gets how could I get his phone out of my accound
Mishijos3 wrote:
I have and iPad and I have and iPhone 5 my husband has another one and I singed all of them with the same Apple ID ...
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l -
I have activated iCloud on iPad2 and iPhone4S (both on iOS 7) using the same Apple ID and signed into 'Find my iPhone' still my iphone is not visible in my devices. I can only see my iPad.
On your iPhone, try toggling Find My iPhone off, then back on after a few seconds.
-
Do you need to use an email as an apple ID? We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also I wanted to know because for the game center we wanted to keep track of each individual not just o e account. DID I MAKE SENSE
Figured it out. Thanks.
-
How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone
How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone, I is easier to work with reminders in Ipad and Iphone rather to see them like a list on ICal
The calendar seems to be the only way to see reminders right now. I'm aware of no 3rd party program that deals with just reminders...but I'd like to find one.
Maybe you are looking for
-
Retrieve values from a table of a JSP page in Servlet.
Hello all, I am new in JSP servlet world, I want to create a grid on JSP page using Servlet. Suppose i have some records in a JSP page and This JSP page will display these records in a tabular form. And, on a button click that table data should be ac
-
Hello, I am getting issue in BPEL code while executing XSLT file. If I have performed the 10 mappings in XSLT file and one of them has error in assigning source to target values. Its just mentioned that following XSLT file has error and doesn't menti
-
ODI Resources Guidance ? ================= I find some interesting features on ODI. There were some webcasts on ODI during March 2011 (As per link in this forum). Did you post this webcasts as resource for replay? Where can I find it? I find "Oracle
-
When I open Acrobat it prompts to enter serial number was twice a week now is twice a day. Do not know how to get this to go away. Worked with Creative Cloud support they said it was a CS6 issue but CS6 does not have support. That I can find
-
Resource / Cost Loading Schedule
I am seeking some ideas about Resource Loading and Cost Loading schedules in P6. My Resources are the subcontractors on the project. Each Subcontractor is the Resource for series of activities. The Resource Type is "Labor" and we plug Labor Units for