Can external HD connect to PS3 and Airport Extreme at the same time?

I currently have a external HD connected to my PS3 to play vids. Can I connect a AirPort Extreme to that HD at the same time to wirelessly drop files on the HD to play on the PS3?
Thanks

Most likely, no. How do you propose that you would connect this drive to both devices simultaneously? Via a USB hub?

Similar Messages

  • Can i run remote memory profiling and remote debugging at the same time .

    can i run remote memory profiling and remote debugging at the same time .
    i am using jdev9.0.5 and oc4j9.0.4 standalone server.
    how to write the batch file to run both at the same time

    Thanks for your help!
    Another question. How do you turn off the ATT wireless transmitter? Also, there are more computers connected to the 2Wire network. I will have to set up a wireless pc to work with the Base Station after disconnecting the ATT transmitter. Easy answers for both, I hope?

  • Using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds.  i can't therefore have unmuted sounds and unlocked rotation at the same time??

    Uh .... Yes you can. You just have to understand how the whole thing works.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How can I connect to Oracle and SQL server at the same time?

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]

    I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
    [email protected]
    As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
    SQL Server table to an Oracle table.
    1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
    separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
    your Oracle sales rep about it.
    2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
    version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
    and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
    check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
    as well as a Heterogeneous Connectivity forum on this site.
    3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
    Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
    into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
    this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
    the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
    5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
    additional information.
    HTH

  • Can you play music to wireless and wired speakers at the same time?

    If you have Airport express, can you play music on speakers plugged into the airport express at the same time as you play from speakers attached to your computer?
    Thanks

    Yes you can. In the bottom right hand corner of the iTunes main window there is a drop down menu. Select the AirPort Express base station(s) you'd like to send your music to and also select 'Computer'. Not only will it play through all, it will play IN SYNC!
    I can't remember with which version of iTunes this was introduced, best to grab the latest version to be sure.

  • Connecting Micro USB and HDMI cables at the same time

    I need to be able to use a Micro USB and HDMI cable at the same time to configure ATV to connect to WPA2-Enterprise secure WiFi network.  I'm using Apple Configurator to do this.  Because of the poor hardware design, it isn't possible to connect both the Micro USB and HDMI cables at the same time.  Does anyone have a worrkaround to resolving this issue? 
    I saw a similar post about this problem in the forums dating back to April 2013 with no real solution.  It's been over a year now and I'm hoping someone has found a workaround to this problem.  I have a bunch of ATVs that I need to configure for our classrooms. 
    Thanks!
    MG

    For what reason do you believe this is necessary?
    How to Install a Configuration Profile: http://support.apple.com/kb/ht5437

  • Can I stream music to apple tv and airport express at the same time?

    Does anyone know if I can stream music to both AppleTV and Airport Express (speakers) at the same time?
    I have a TV in my living room and external speakers on my deck and want to stream music to both at the same time so I have the same music playing in both rooms - but I can't get an answer on IF I can do both at the same time or it I'd have to select one over the other?
    Anyone know?

    yes - the built-in music app allows to select one speaker only at the same time.
    now i've found the WHAALE Multiroom Player App (http://www.whaale.com) - and it sends directly from the iOS Device to my 6 AirPlay speakers. One of them is an Apple TV...
    all "in sync" and without any special hardware and additional software.
    And i am able to stream different songs to different rooms...
    Just AirPlay speakers - wifi router - WHAALE -> that's easy :-)

  • Airport Extreme N connect to N and G laptop at the same time?

    I'm considering of getting the new airport extreme as one of my new mac book pro is N compatible. But my older one is only G.
    I know the base station can connect to both N and G. But if there are one G only computer in the net work does the base station has to be always on G ? and compromised its full potential of running in N mode? Or can it be at N and G mode simultaneously, allowing the new laptop to connect at N speed and older one at G speed at the same time?
    Thanks for your help !

    This is exactly my question. I have an Apple G base station, a PowerBook and and AX. I'd like to use those in G and run the rest in N.
    Here's what I have: AEBS G, AX, G4 Tower with edimax N card, iMac Aluminum N, Powerbook G and HP AIO G. I want to buy an AEBS N and not have it slow down due to the G, but still run the G devices.
    Based on what I read, I can ethernet my AX to the Extreme N? But that will put it too far away from my stereo. So I have a white G extreme base station, Can I ethernet that to run the G network and use my AX wirelessly as an extender to also hook into the stereo?
    The Edimax PCI N card from OWC for my G4 is not yet installed. I am not 100% positive but I don't think it is 5 GHz. Is that an issue for max thruput? Are there 5 GHz cards made, or do I just suck it up? Does it make much of a difference in speed?
    Would I be better off ethernetting the G4?
    Finally, re the HP wireless AIO, G speed. Will the N network devices be able to print on it if it is connected by a separate G network?
    I use my network as a client-server setup, so the increase in thruput would be welcome but not essential.
    Thanks--hopefully this is not too confusing.

  • Connecting to wireless AND wired network at the same time.

    I just bought 2 lacie 500 GB Network Hard Drives with Gigabit Ethernet. One for file storage, the other for a backup of the first drive.
    My iMac connects to my DSL router using a Linksys wireless G Access Point, which is in another room in my apartment, due to the genius contractor installing only one telephone jack.
    So can I use my iMac's ethernet port to connect to a gigabit switch, and then connect the 2 external HDD to the switch? I don't need the other computers on my network to have access to the external HHD, just my iMac. However I do need to be on the 'net and have access to the external HDDs at the same time.
    Thanks

    No problem at all, the Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.
    So drag Airport to the top, Ethernet second and you should be good to go.

  • Sharing Music with Computer and Airport Express at the same time?

    I just purchased and set up airtunes with some powered speakers.
    I cannot figure out how I can play the same music at the same time to shared computers and the Express Powered Speakers at the same time.
    Can you help me with configuring instructions please?
    iMac G5 with Airport Extreme and DSL w/ iTunes pointing to external hard drive music library.
    PowerBook G4 in the kitchen wireless can share music when computer is selected.
    Powered Speakers on the screen porch with Airport Express connected can only play music when Express is selected.
    How do I fix this so that when we have a dinner party we have the same music in the office, the kitchen and the screen porch all playing together at the same time?
    Thanks.
    I hope my question is clear as I really would love to sort this out before our party.

    Although your problem is slightly different, it seems that you are having the exact same issues that I had just two days ago - solved for me by Felix. If you check the link below, it goes through what I had to do, which was basically to update the software on my airport express base station, which he explains well:
    http://discussions.apple.com/thread.jspa?threadID=476631&tstart=30
    When I did it, it then gave me the option on iTunes (check the picture at http://www.apple.com/airportexpress/airtunes.html to see the magnified bit on iTunes) and then I could just choose multiple speakers concurrently.
    Hope this helps.

  • How can i use an barcode scanner and a keyboard at the same time on Ipad

    HI I am looking to find a way to use a barcode scanner and the on screen key bard at the same time, so far i cant seem to find a way to do it.
    Does any one know how this can be done.
    thanks

    It is possible, I use multiple versions, however Firefox official policy is that you use firefox3.6 or 5 ; not firefox 4 which is not secure and not supported.
    The easiest solution may be to use firefox portable http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 although firefox 3.6 will itself not be supported for much longer.

  • Can you pair with an iMac and an iPad at the same time?

    If you have an iMac and an iPad, is it possible to pair the same Apple Wireless Keyboard with both of them, rather than having to buy two Wireless Keyboards?

    I've kind of found an answer to my question, but I'm not totally satisfied. Basically, yes, you can use one Apple Wireless Keyboard with an iMac and iPad, but obviously not at the same time.
    To switch the Apple Wireless Keyboard over from working with the iMac to working with the iPad, you first have to "Disconnect" the keyboard in System Preferences > Bluetooth. This frees up the keyboard, making it available for the iPad to access.

  • Can multiple devices access drives connected to Airport extreme at the same time?

    i have a few days to decide before someone gets me either an airport extreme or a decent NAS adapater to using with my existing airport express, from the US. my airport express serves me good for all my networking needs but i have decided to take my portable media wireless.
    i wanna know which will be the best option? to plug in the portable hdds to an a.extreme via a usb hub and share it across devices or to do the same with a nas adapter using my existing current generation a.express?
    i got ios, android, mac and windows devices on my network. and an apple tv.
    please share ur thoughts.
    Neerav

    Express is slow ethernet.. 10/100 only. The max speed of any connection to a USB hard disk is limited severely by the 100mbit..
    USB is always slow btw.. This is actually a poor way to share a drive. A cheap NAS.. ie ethernet to Sata directly is far far superior and a single disk NAS can be had cheaply.. you will never get close with USB in network situations.
    If you use a hub though, you can plug multiple disks into an Extreme.. I guess the network speed is at least no worse than the USB hub -- ethernet devices which are lousy as a whole.
    Never forget you have the fastest ethernet adapters and fastest possible connectors already on computers on the network.. people are so utterly mesmerized by NAS they forget.. a FW800 or better USB3 if you have a newer computer shared to the network from a computer has much higher throughput and is much cheaper than even the very low end network stand alone boxes.

  • Using original airport and airport express at the same time

    I am currently using a G4 iBook (14 in, 1.33 GHz, 512 MB RAM, 10.3.9) with Airport Express, which works great. However, I'd also like to make my iMac (slot-loading, 500 MHz, 384 MB RAM, 10.2.8) wireless. The iMac will accept an original airport card with an adapter. Should I anticipate any problems combining old and new technology like this?
    Thanks!

    Hi - and thank you for answering my original question. However, I have run into a bit of a problem. The installation of the airport card in the G3 iMac went fine, and I can see the network under the airport icon. But, when I go to join the network, the password I use for the iBook doesn't work and I cannot join. I get either "There was an error joining the selected Airport network" or "The password is not correct for the selected network". Should I be able to join the existing network using the same password? Does this sound like a configuration problem?
    Some additional info which may not be relevant - my current setup with the iMac (prior to trying to go wireless) has the iMac connected to a Linksys cable/DSL router via an Ethernet cable. The DSL router is plugged into the original DSL modem I got from Earthlink. The router was added so that I can also use a laptop PC to work at home - but the PC laptop has not been plugged into the router during the time I've been trying to connect to the wireless network with the iMac. I'm told by the IT guys at work that the way things are connected and configured, the router does the actual dialing and not the DSL modem.
    Thanks in advance for any advice you can offer.

  • Can I back up a PC and a Mac using the same Time Capsule?

    I'm trying to set up a PC and a Mac to backup on Time Capsule, but can't seem to get the PC to back up.  Does anyone know if it is possible.  My Mac works fine but I would like to also back up the PC.

    I haven't tried it, but Genie Timeline Pro claims to be able to backup to the Time Capsule.
    You might want to take a look. Contact the Genie folks to verify on this.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...

Maybe you are looking for